Windows 2008 R2 Sp1 Blue Screen Error and solution
Hi Guys its been like the 5th time i keep on getting this error on my exchange server which is hosted under Windows 2008 R2 Sp 1 this is the error below please help
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.274.10
Locale ID: 1033
Additional information about the problem:
BCCode: 4a
BCP1: 000000007719133A
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF880094B2CA0
OS Version: 6_1_7601
Service Pack: 1_0
Product: 274_3
Files that help describe the problem:
C:\Windows\Minidump\061714-141960-01.dmp
C:\Users\Asger\AppData\Local\Temp\WER-292189-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Regards
Asger
Regards, Asger
Hi Asger,
Would you please let me confirm whether this BSOD issue occurred suddenly? If you can reproduce the problem, please perform a
clean boot and check if this issue still persists.
For this BSOD issue, we may need to analyze the crash dump file to narrow down the root cause of it. Please refer to following article and check if can help you to analyze
the dump file.
How to read the small memory dump file that is created by Windows if a crash occurs
How to Debug Kernel Mode Blue Screen Crashes
(for beginners)
You got a B.S.O.D. (Blue Screen
of Death, known as Bug Checks), now what?
By the way, it is not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service
and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope this helps.
Best regards,
Justin Gu
Similar Messages
-
Oracle RAC 11g on Windows 2008 64 bit - blue screen error on both nodes
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull and crs_state -t shows all services in two nodes are online.
When executed a select query with 100 sessions( For performance evaluation using Transaction generator ) ,the machine got crashed and blue screen is appeared on two nodes. I restrated the machines and and starts the same evaluation ,bt the same bug is repeating.
Can anyone suggest a solution to solve this issue? Is our hardware is not sufficient ? Shall we need to perform any
specific settings in Oracle RAC setup for performance evaluations?
Is our settings for load balancing is not enough? ( We added "Load Balancing= On" on tnsnames.ora on client for load
balancing)
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC 11g , Clusterware 11g R2 , ASM with 5 raw disk ( 1- votting disk ,1- ocr files and 3 disk files)
Edited by: user2033016 on Jun 29, 2011 10:02 PMuser2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed? -
Blue screen error and unexpected reboot - km:x64_0xf4_java.exe_image_csrss.exe,
On Wed, 4 Mar 2015 11:19:38 +0000, Perumal Ramasamy wrote:
Blue screen error and unexpected reboot - km:x64_0xf4_java.exe_image_csrss.exe,
This forum, as per the name, is only for Windows 10 Server questions.
Please repost to:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver
Paul Adare - FIM CM MVP
AAAAAA - American Association Against Acronym Abuse Anonymous. -
Windows 2008 r2 guests blue screen on Windows 2012 R2 Hyper-V Cluster with e5 2670-v2 processors
Hello all,
We have a new hyper-v infrastructure deployed in two brand new Dell R720 Servers with 384GB of Memory and dual Intel e5 2670-v2 processors. This infrastructure is replacing an existing hyper-v 2008 R2 and all the guests are being migrated to this new cluster.
The issue we are seeing is our 2008 r2 guests blue screening ocasionally with 0x0000001a,0x0000004e or 0x00000050 bugchecks.
All this guests are configured with dynamic memory and with the integration components up to date. These same guests were running with no problems in the hyper-v 2008r2 cluster.
When searching i found this article from vmware that pretty much describes what we are facing:
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2073791
Are you aware of the same problem with this kindd of hardware on windows 2012 r2 hyper-v?
Thanks!
Nuno CarvalhoMeanwhile i found this May 2014 update on the intel specification of the CPU we are using:
CA135 Incorrect Page Translation when EPT is enabled
Problem:
If EPT (Extended Page Tables) is enabled, then a complex sequence of internal processor events may result in unexpected page faults or use of incorrect page translations.
Implication:
Due to this erratum a guest may crash or experience unpredictable system behavior.
Workaround:
It is possible for the BIOS to contain a workaround for this erratum.
Status:
For the affected steppings, see the
Summary Tables of Changes.
This affects VMware as of the today update of the article i referenced in the first post, what about hyper-v?
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/xeon-e5-v2-spec-update.pdf
Nuno Carvalho -
A blue screen error and suddenly shutdown on my Sat M70
i have a M70 laptop i buy it just 3 weeks ago. i start facing the following problems
- system exhibit blue screen with an error message that i do not understand ( ) just when i slightly move my laptop or even when just changing the screen angle!!!!!!!!!!!! ( sometimes with a stange noise from the right highspeaker)
- sometimes the screen shutdown but the system is usually running ( i can hear noise and LED is brightning)
i am recognizing your help and interestHi
Usually if the Blue Screen error message occurs, so it could be a serious software fault or a hardware malfunction.
There is no generally solution for this problem. In my opinion you should check, if the software is responsible for this malfunction.
Try to install new OS or recover the unit with the delivered recovery CD.
Maybe this will solve the problems.
If not so it must be something wrong with the hardware. You should contact the Toshiba service. He can run some diagnostic test and you will get a detailed answer what its wrong. -
Blue screen error and start up failure
i have a problem with my hp pavellion 15 notebook (n020nr) im getting various blue screen errors that keep saying all the time, when my computer is restarting it shuts down but my led s caplock and the flight mode are still on, so i just press the power button and holding it for 15 and it keeps the same, so i have to take out the battery and the charge and hold the botton for 30 seconds so after that i just unplug in the charge and it turns on and it works fine for atleast 5 or 6 minutes and then it shows the blue screen error dpc violation and sometimes i got driver power state fauile, the computer is not very old i got it from Telus company 4 or 3 months ago, please if someone could help me i would really appreciate.
P.S sorry for my englishHi sebastian24,
Welcome to the HP Forums! You mentioned the Caps Lock keys stays on, does it flash at all? If so how many flashes in the pattern? This will help us determine the cause of the errors. These blue screens are commonly referred to as a Blue Screen of Death and can be quite difficult to fix. If you just purchased it you should still be in warranty, I recommend that you call HP Total Care at 1-800-474-6836 in North America or visit the link below if you are outside North America.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
Windows 7 Unexpected shutdown Blue screen error
I am running Windows 7 64bit on a new HP Pavilion desk top that came with Windows 7 installed. The systems shutdown for no apparent reason and goes back to log in screen. When I reboot, this is the message I get.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 116
BCP1: FFFFFA800787F010
BCP2: FFFFF88004829490
BCP3: 0000000000000000
BCP4: 0000000000000002
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\110209-17316-01.dmp
C:\Users\Molson\AppData\Local\Temp\WER-1178946-0.sysdata.xml
PLEASE HELP! This is getting old. It happens several times a day!Hi, please can some one help me. MY blue screen seems to happen alot when I'm on the web. I have attached my error report below.
<!-- /* Font Definitions */ @font-face {font-family:"Cambria Math"; panose-1:2 4 5 3 5 4 6 3 2 4; mso-font-charset:0; mso-generic-font-family:roman; mso-font-pitch:variable; mso-font-signature:-1610611985 1107304683 0 0 415 0;} @font-face {font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4; mso-font-charset:0; mso-generic-font-family:swiss; mso-font-pitch:variable; mso-font-signature:-520092929 1073786111 9 0 415 0;} @font-face {font-family:"Segoe UI"; panose-1:2 11 5 2 4 2 4 2 2 3; mso-font-charset:0;
mso-generic-font-family:swiss; mso-font-pitch:variable; mso-font-signature:-520084737 -1073683329 41 0 479 0;} /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {mso-style-unhide:no; mso-style-qformat:yes; mso-style-parent:""; margin-top:0cm;
margin-right:0cm; margin-bottom:10.0pt; margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri;
mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} .MsoChpDefault {mso-style-type:export-only;
mso-default-props:yes; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New
Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} .MsoPapDefault {mso-style-type:export-only; margin-bottom:10.0pt; line-height:115%;} @page WordSection1 {size:612.0pt 792.0pt; margin:72.0pt 72.0pt 72.0pt 72.0pt; mso-header-margin:36.0pt;
mso-footer-margin:36.0pt; mso-paper-source:0;} div.WordSection1 {page:WordSection1;} -->
Problem signature:
Problem Event Name:
BlueScreen
OS Version:
6.1.7600.2.0.0.256.48
Locale ID:
2057
Additional information about the problem:
BCCode:
d1
BCP1:
00000000
BCP2:
00000002
BCP3:
00000000
BCP4:
8B04528F
OS Version:
6_1_7600
Service Pack:
0_0
Product:
256_1
Files that help describe the problem:
C:\Windows\Minidump\082610-22183-01.dmp
C:\Users\Akanbi\AppData\Local\Temp\WER-59186-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Please let me know if you need more information or have a solution to this query.
Thanks. -
ITunes 8:Windows Vista displays a blue screen error message when connec
Right...I have read the support page regarding to the problem, and it told us not to use itune8setup or itune864. What can I use, where can I find it as the i-tune download page downloads the itune8setup file...
thanksSo, I went to the page you posted and worked through the 'burn a DVD problem'.
I was able to create a pure AVI project, and burn it to a folder and then burn it to a disc. This disc would not play on a DVD player, which is what I am aiming for.
I also defragmented the hard drive.
So, I thought I'd try the original burn again: Share to DVD. It did not work again.
So, I am thinking that the photos are definately too large, however it did make the AVI project, so does this eliminate the possibility that the photos are too big?
Strange though, because the very 1st time I burned this project, it did do it!! But not since!
What do you think? -
I am still not able to connect my iPad 2 to my Pc ( windows xp). When I try to do so I get a blue screen error and the computer shuts down. I have reinstalled iTunes. iPod works fine. Any ideas?
Not sure, but try these.
Disable your firewall and anitvirus software temporarily.
Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
Cheers, Tom -
Blue screen error (BSOD) during and after installation of Windows 7
I had to reinstall Windows 7 via the recovery partition. During the installation I kept getting Blue screen errors and even now I am still getting BSOD within minutes. I have no problem in safe mode.
My laptop is a Satellite C650D-12C. I wanted to update BIOS but I can't in safe mode. What should I do next?Recovery image saved on HDD is tested so everything should be OK with recovery image installation.
What you can try is to use Microsoft installation disc to see if the same will happen again.
If yes, Im afraid you need professional help with this. Notebook has probably valid warranty so the service guys should check this.
Have you created recovery DVD?
BTW: I think BIOS update is not solution. Recovery installation must work with this original BIOS version. -
Hello,
About 15 days ago,my laptop is showing blue screen errors,really this is very frustrating.
I use a lenovo laptop,
Processor
Core i3 (3rd Generation)
System Memory
4 GB DDR3
HDD Capacity
320 GB
Operating System
Windows 8
System Architecture
64-bit
Dedicated Graphics Memory Type
DDR3
Dedicated Graphics Memory Capacity
1 GB
Graphic Processor
NVIDIA GeForce 610M
i have tried methods like , 1) un installing the anti virus (Quick Heal Total Security) and re installing again
2)Turning Firewall on and off. Because someon said that this could be a cause of Anti virus..
3)Optiminzing the disk drives...
4)i have used a software called "Blue screen view".which shows all the daetails of blue screen errors
and all dumps files.And also i deleted all the dump files and folder , but also the problem persists.
5)in Google search someone told that to update all the drivers. i have also done that
6)i have uninstalled and reinstalled the graphics driver.
So, i have tried all the methods given online,but i didnt get any help from it.
So please help me . I am tired of all this
*Sorry for poor englishWithout the Minidump Files to help us isolate the cause of the errors you are experiencing there is no way to provide assistance specific to your situation.
One of the most common causes of errors are drivers. You have already mentioned that you have upgraded your graphics driver to the latest version provided by the manufacturer, updating other drivers like network, chipset, and storage controllers is a good
next step. If no driver updates resolve your issue and you have already looked into security software as a possible cause, another direction to take would be to review your hardware for possible failures. You can diagnose your memory by
entering “Diagnose your computer’s memory problems” at the start screen and selecting the result. You can also diagnose your storage devices by
right clicking the storage device in File Explorer, selecting properties, and selecting Error Checking.
Brandon
Windows Outreach Team- IT Pro
The Springboard Series on TechNet -
Office 2013 and Windows 2008 R2 SP1 AD RMS
Hi All,
I have installed Windows 2008 R2 SP1 AD RMS service, and it works well with Office 2010/2007, does not however work with office 2013, below is the error I get:
sorry, something went wrong opening information rights management protected content. the request is not supported
I have added the AD RMS cluster URL and the AD RMS licensing URL to the loacl Intranet security zone (http://realercheng.wordpress.com/2013/01/23/office-2013-failed-to-create-and-consume-protected-content-with-connect-to-digital-rights-mangement-services-and-get-template/),
however, I still get the same error.
Does Office 2013 work with Windows 2008 AD RMS, and if it does what is the issue here and how do I go about sort it?
KimaniBobHi,
Im am using server 2008 r2 sp1 and users are using windows 7 enterprise, office 2010 pro. plus. They can see right policy
template with office 2010.
But now I have installed office 2013 pro. plus and added new admx files to new gpo for office 2013 also enabled this policy
"Enter Permission Policy Default Server for Quick Access Toolbar" and this is writing in the policy \\serverhostname But I cant receiving ad rms templates from my outlook?
Is server 2008 r2 sp1 ad rms compatible with office 2013 or am I have to install server 2012 ad rms for office 2013?
How can I fix this problem?
Thanks. -
Getting Blue Screen error BCCode: 1a
Sometimes mi PC with windows VISTA have espontaneus Blue Screen Error.Then after startup I would get this message,can someone tell me what I shshould do?
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 11274
Additional information about the problem:
BCCode: 1a
BCP1: 00041790
BCP2: C08020AC
BCP3: 0000FFFF
BCP4: 00000000
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\Mini093014-01.dmp
C:\Users\jgalante\AppData\Local\Temp\WER-61171-0.sysdata.xml
C:\Users\jgalante\AppData\Local\Temp\WER140F.tmp.version.txt
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0c0aHi,
Bug Check 0x1A: The MEMORY_MANAGEMENT bug check has a value of 0x0000001A. This indicates that a severe memory management error occurred.
You can refer to the link below for more details about this error:
http://msdn.microsoft.com/en-us/library/windows/hardware/ff557391(v=vs.85).aspx
When you encounter a BSOD (Blue Screen of Death) in Windows the computer will save information regarding the error message in a log file. This log file or minidump file is saved in the Minidump subdirectory under Windows (C:\Windows\MiniDump). Generally
the information saved in this minidump file can help pinpoint the cause of the blue screen error message and help you in resolving the problem.
Roger Lu
TechNet Community Support -
My C5180 All-in-one has, all of a sudden, stopped working. When trying to print, I get a blue screen-error and the pc reboots.
The following is the error description provided by windows after the reboot:
Name of Error: BlueScreen
OS-version: 6.1.7600.2.0.0.768.3
Country-id: 1030
Additional info on error:
BCCode: 1
BCP1: 0000000077A2FF2A
BCP2: 0000000000000000
BCP3: 000000000000FFFF
BCP4: FFFFF8800545FCA0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files describing error:
C:\Windows\Minidump\050110-31859-01.dmp
C:\Users\CURRENTUSER\AppData\Loca\Temp\WER-55796-0.sysdata.xml
Sincerely
NielsenWith the blue screen it can be a few things that are interifering with it. First thing unplug anything from the usb ports on your computer and if you have like a logtech webcam make sure it is unplugged and also that if it is built in disable the driver. If you are on a pc you may want to go into device manager and update your usb drivers on your computer.
use these articles
http://support.apple.com/kb/TS2280
http://support.apple.com/kb/TS1502 -
Blue Screen error !!! 0x00000101
Hi
sorry if my english is`t that good....
I recetnly have a problem with my windows...
this blue screen error often appeare when I playing games...
Os: win 7 32B
Ram : 4g
Cpu : core i3 2100
and this is my minidump error that windows saved : http://0up.ir/up7/9-010210-15958-01.rar
for more information i can tell u that i reistall my windows and defrag hard and error cheack my HDDSTOP 0x101: CLOCK_WATCHDOG_TIMEOUT Troubleshooting
Here's a good thread on http://www.sysnative.com/forums/showthread.php/1248-0x101-quote-A-clock-interrupt-was-not-received-on-a-secondary-processor-quote
What you're looking for will be in one of the following categories:
a) BIOS bug
b) a driver whose activity is causing the target processor to lock up
c) a hardware defect (temperature, voltage, dust, RFI, outright borkedness...) ?I wonder about CPU defect also)
So, check the drivers http://www.carrona.org/dvrref.php
Then check the inside of the case (temperature, voltage, dust, etc).
Then run hardware stress tests
Try this free video stress test: http://www.ozone3d.net/benchmarks/fur/
FurMark Setup:
- If you have more than one GPU, select Multi-GPU during setup
- In the Run mode box, select "Stability Test" and "Log GPU Temperature"
Click "Go" to start the test
- Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
- Click "Quit" to exit
Try this free stress test: Free Software - http://download.cnet.com/Prime95-32-bit/3000-2053_4-192895.html
Prime95 Setup:
- extract the contents of the zip file to a location of your choice
- double click on the executable file
- select "Just stress testing"
- select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead.
- "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
The Test selection box and the stress.txt file describes what components that the program stresses.
More Video Stress Tests:
1. Thanks to Vir Gnarus (http://www.sysnative.com/forums/members/vir-gnarus.html) for finding this video memory test: https://simtk.org/home/memtest
Alternate download link (w/o registration) located here: http://folding.stanford.edu/English/DownloadUtils
2. Two other video stress tests (may be more stressful than FurMark):
NOTE: I have had reports that some ISP's will block this website
Video Memory stress Test - http://nvworld.ru/utilities/vmt/
Artifact Locator - http://nvworld.ru/utilities/alocator/
Sorry, but I don't read the language that this website is made in.
3. Another interesting test that came to my attention: http://www.ocbase.com/perestroika_en/index.php?Download
USE AT YOUR OWN RISK - the program doesn't have a whole bunch of safety features to protect you from yourself!
Quote:
CPU Stress Tests:
Only need to run 1 or 2 of the tests under most circumstances. I haven't used any of the tests myself, so I listed all that I was able to find.
- http://downloadcenter.intel.com/Deta...19182&lang=eng
- http://7byte.com/index.php?page=hotcpu
- http://www.7byte.com/index.php?page=burnin64
- http://www.overclock.net/general-pro...ress-test.html
- http://www.fossiltoys.com/cpuload.html
- http://www.pcworld.com/downloads/fil...scription.html
- http://www.overclock.net/general-pro...ress-test.html
- http://majorgeeks.com/CPU_Stability_Test_d215.html
- http://www.xtremesystems.org/forums/...d.php?t=201670
- the test(s) suggested at this link are bootable: http://www.techsupportforum.com/foru...ml#post2232929
Then try replacing parts.
Then look up the versions of your BIOS to see what changes were done.
Recently it was found (here: BSOD Stop 0x00000101 and Stop 0x0000009c ) that a wipe and reinstall of Windows fixed a STOP 0x101 problem. I'd have to recommend at least running SFC.EXE /SCANNOW on any PC that has this problem (simply because it's too easy easy
to do and it may fix things).
Wanikiya and Dyami--Team Zigzag
Maybe you are looking for
-
Is there a way for photoshop to AUTO UPDATE all linked files after modified?
Using the new Photoshop 2014 (version). This is a very frustrating task for anyone using a lot of linked files. As a web developer, I may have 50 files that contain one linked element. If I go edit that element, I then have to find the layer on each
-
The L and O keys on my keyboard stopped responding. Now locked out
After the L and O keys ceased responding I decided to restart my computer. The computer is password protected and one of the elements to my password contains one of those letters. So I am currently locked out of my computer as the key to enter the pa
-
How to approach for downloading a CSV file?
I'm running the following query and QoQ . Could you tell me how should I proceed for the "Download CSV" file option? <!--- QoQ for FIRSTCONN ---> <cfquery datasource = "XX.XX.X.XX" name="master1"> SELECT STR_TO_DATE(date_format(Tim
-
How do I delete items in my calendar when it doesn't work when I hover them over the trash can?
-
How to auto update a web gallery from an iphoto album?
how do you set-up an iphoto album to automatically update a web gallery album? so if i add a new photo to an existing album on my computer that has a corresponding web gallery album that web gallery will know to add that photo i'm trying to keep the