Windows 2008 r2 sp1 installation error 0x800f081f

I have two servers that are nearly identical running Windows 2008 R2.  Both are Hyper-V hosts.  I have applied SP1 to one of them, but am having problems getting SP1 to install on the 2nd one.  The downloaded installation fails with 0x800f081f. 
I have found
posts that refer to the Remote Server Administration Tools (RSAT) but since this is NOT Windows 7 and I have not installed the RSAT tools, I am at a loss.
I have also found
this thread that seems to be similar to my issue, except the O/S is Windows 7 instead of Windows 2008 R2.
I can see the failure in the CBS.log file, but don't know how to troubleshoot this problem.
2011-03-03 21:38:06, Info                  CBS    Calling client to resolve source, cannot find file 'TsUsbGD.sys' at path: \\?\C:\Windows\Servicing\Packages\amd64_tsgenericusbdriver.inf_31bf3856ad364e35_6.1.7601.17514_none_9872c8452ac8f816\TsUsbGD.sys
2011-03-03 21:38:06, Error                 CBS    Exec: Failed to pre-stage package: Package_for_KB976933~31bf3856ad364e35~amd64~cs-CZ~6.1.7601.17514, file: TsUsbGD.sys,
source: \\?\C:\Windows\Servicing\Packages\amd64_tsgenericusbdriver.inf_31bf3856ad364e35_6.1.7601.17514_none_9872c8452ac8f816\TsUsbGD.sys, sandbox: (null) [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info                  CBS    Failed to gather all required files. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info                  CBS    Failed to gather all missing files for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 [HRESULT
= 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info                  CSI    0000000e@2011/3/4:03:38:06.785 CSI Transaction @0x3316be0 destroyed
2011-03-03 21:38:06, Error                 CBS    Failed to pre- stage package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info                  CBS    Perf: Stage chain complete.
2011-03-03 21:38:06, Info                  CBS    Failed to stage execution chain. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Error                 CBS    Failed to process Multi-phase execution. [HRESULT = 0x800f081f - CBS_E_SOURCE_MISSING]
2011-03-03 21:38:06, Info                  CBS    WER: Generating failure report for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, status:
0x800f081f, failure source: Stage, start state: Staged, target state: Staged, client id: SP Coordinater Engine
2011-03-03 21:38:06, Info                  CBS    Failed to query DisableWerReporting flag.  Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-03-03 21:38:07, Info                  CBS    Failed to add %windir%\winsxs\pending.xml to WER report because it is missing.  Continuing without it...
2011-03-03 21:38:07, Info                  CBS    Failed to add %windir%\winsxs\pending.xml.bad to WER report because it is missing.  Continuing without
it...
I have also attempted an SP1 installation using Windows Update, but it fails, too.
I have installed the
System Update Readiness Tool with no change in the outcome.
I have run sfc /scannow with no effect.
Can anyone assist?
Thanks...Russ

Hi,
I have exact the same problem.
After installing SP1 Windows 2008 R2 through windows update i can not start server manger..
System Update Readiness Tool
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 11.0
2011-03-15 12:29
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
(f)    CBS Watchlist Package Missing    0x80070002    Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~0.0.0.0    Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1   
Package registry presence failed, possibly an orphaned package on package watchlist
Checking Component Watchlist
(f)    CBS Watchlist Component Missing    0x80070002    amd64_microsoft-windows-upnpcontrolpoint_31bf3856ad364e35_0.0.0.0_none_b2c7ff753148df7e    Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1   
Package registry presence failed, possibly an orphaned package on package watchlist
(f)    CBS Watchlist Component Missing    0x80070002    amd64_microsoft-windows-upnpcontrolpoint_31bf3856ad364e35_0.0.0.0_none_b2c7ff753148df7e    Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1   
Package registry presence failed, possibly an orphaned package on package watchlist
(f)    CBS Watchlist Component Missing    0x80070002    x86_microsoft-windows-upnpcontrolpoint_31bf3856ad364e35_0.0.0.0_none_56a963f178eb6e48    Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1   
Package registry presence failed, possibly an orphaned package on package watchlist
(f)    CBS Watchlist Component Missing    0x80070002    x86_microsoft-windows-upnpcontrolpoint_31bf3856ad364e35_0.0.0.0_none_56a963f178eb6e48    Package_7_for_KB2467023~31bf3856ad364e35~amd64~~6.1.1.1   
Package registry presence failed, possibly an orphaned package on package watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 387
 Found 5 errors
  CBS Watchlist Package Missing Total count: 1
  CBS Watchlist Component Missing Total count: 4

Similar Messages

  • Windows 2008 r2 SP1 installation failed with unspecified error 0x80004005 - E_FAIL

    Hi Team,
    We have SQL data base server with Win 2008 r2 OS.When trying install Sp1 it fails after reboot with unspecified error -0x80004005 - E_FAIL.
    Server having snap drive connected with 6 SQL data bases. Sp1 installation running 7 hrs and falling after couple of reboot.
    Any help appreciated.CBS log attached.
    ================================ 2015-01-24 18:48:22, Info CBS Starting TrustedInstaller initialization. 2015-01-24 18:48:22, Info CBS Loaded Servicing Stack v6.1.7601.17514 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17514_none_678566b7ddea04a5\cbscore.dll
    2015-01-24 18:48:23, Info CSI 00000001@2015/1/24:18:48:23.137 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee8d4e94d @0x7fee9079839 @0x7fee90434d3 @0xff03e94c @0xff03d769 @0xff03daff) 2015-01-24 18:48:23, Info CBS Could not load SrClient DLL
    from path: SrClient.dll. Continuing without system restore points. 2015-01-24 18:48:23, Info CSI 00000002@2015/1/24:18:48:23.139 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee8d4e94d @0x7fee90c6806 @0x7fee9092a9c @0x7fee90435a9 @0xff03e94c @0xff03d769)
    2015-01-24 18:48:23, Info CSI 00000003@2015/1/24:18:48:23.139 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee8d4e94d @0x7fee9988728 @0x7fee9988856 @0xff03e444 @0xff03d7ae @0xff03daff) 2015-01-24 18:48:23, Info CBS Ending TrustedInstaller initialization.
    2015-01-24 18:48:23, Info CBS Starting the TrustedInstaller main loop. 2015-01-24 18:48:23, Info CBS TrustedInstaller service starts successfully. 2015-01-24 18:48:23, Info CBS SQM: Initializing online with Windows opt-in: False 2015-01-24 18:48:23, Info CBS
    SQM: Cleaning up report files older than 10 days. 2015-01-24 18:48:23, Info CBS SQM: Requesting upload of all unsent reports. 2015-01-24 18:48:23, Info CBS SQM: Failed to start upload with file pattern: C:\Windows\servicing\sqm\*_std.sqm, flags: 0x2 [HRESULT
    = 0x80004005 - E_FAIL] 2015-01-24 18:48:23, Info CBS SQM: Failed to start standard sample upload. [HRESULT = 0x80004005 - E_FAIL] 2015-01-24 18:48:23, Info CBS SQM: Queued 0 file(s) for upload with pattern: C:\Windows\servicing\sqm\*_all.sqm, flags: 0x6 2015-01-24
    18:48:23, Info CBS SQM: Warning: Failed to upload all unsent reports. [HRESULT = 0x80004005 - E_FAIL] 2015-01-24 18:48:23, Info CBS No startup processing required, TrustedInstaller service was not set as autostart, or else a reboot is still pending. 2015-01-24
    18:48:23, Info CBS NonStart: Checking to ensure startup processing was not required. 2015-01-24 18:48:23, Info CSI 00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDisposition = @0x136f6c0
    2015-01-24 18:48:23, Info CSI 00000005 Creating NT transaction (seq 1), objectname [6]"(null)" 2015-01-24 18:48:23, Info CSI 00000006 Created NT transaction (seq 1) result 0x00000000, handle @0x23c 2015-01-24 18:48:23, Info CSI 00000007@2015/1/24:18:48:23.144
    CSI perf trace: CSIPERF:TXCOMMIT;1211 2015-01-24 18:48:23, Info CBS NonStart: Success, startup processing not required as expected. 2015-01-24 18:48:23, Info CBS Startup processing thread terminated normally 2015-01-24 18:48:23, Info CSI 00000008 CSI Store
    3877440 (0x00000000003b2a40) initialized 2015-01-24 18:48:23, Info CBS Session: 30423046_1416810351 initialized by client RMT. 2015-01-24 18:48:24, Info CSI 00000009@2015/1/24:18:48:24.057 CSI Transaction @0x1761b90 initialized for deployment engine {d16d444c-56d8-11d5-882d-0080c847b195}
    with flags 00000002 and client id [26]"TI5.30423046_1416810351:1/" 2015-01-24 18:48:24, Info CSI 0000000a@2015/1/24:18:48:24.059 CSI Transaction @0x1761b90 destroyed 2015-01-24 18:48:24, Info CBS Appl: DetectUpdate, Package: Microsoft-Windows-SecureStartup-OC-Package~31bf3856ad364e35~amd64~~6.1.7600.16385,
    Remote Parent: DirectoryServices-DomainController-Tools, Intended State: Staged 2015-01-24 18:48:24, Info CBS Appl: DetectUpdate, Package: Microsoft-Windows-SecureStartup-OC-Package~31bf3856ad364e35~amd64~~6.1.7600.16385, Remote Parent: DirectoryServices-DomainController-Tools,
    Intended State: Staged 2015-01-24 18:48:24, Info CBS Appl: Evaluating applicability block(detectUpdate part), disposition is: Staged, applicability: NotApplicable, result applicability state: Staged 2015-01-24 18:48:24, Info CBS Appl: Package: Microsoft-Windows-SecureStartup-OC-Package~31bf3856ad364e35~amd64~~6.1.7600.16385,
    Update: BdeAducExtTool, Applicable: NeedsParent, Dis 2015-01-24 18:48:24, Info CBS Appl: DetectUpdate, Package: Microsoft-Windows-WMI-SNMP-Provider-Package~31bf3856ad364e35~amd64~~6.1.7600.16385, Remote Parent: SNMP, Intended State: Installed 2015-01-24 18:48:24,
    Info CBS Appl: Evaluating applicability block(detectUpdate part), disposition is: Staged, applicability: Applicable, result applicability state: Installed 2015-01-24 18:48:24, Info CBS Appl: Package: Microsoft-Windows-WMI-SNMP-Provider-Package~31bf3856ad364e35~amd64~~6.1.7600.16385,
    Update: WMISnmpProvider, Applicable: Applicable, Dis 2015-01-24 18:48:24, Info CBS Appl: DetectUpdate, Package: Microsoft-Windows-IIS-WebServer-Package~31bf3856ad364e35~amd64~~6.1.7600.16385, Local Parent: IIS-WebServerRole, Intended State: Staged 2015-01-24
    18:48:24, Info CBS Appl: Evaluating applicability block(detectUpdate part), disposition is: Staged, applicability: NotApplicable, result applicability state: Staged 2015-01-24 18:48:24, Info CBS Appl: Package: Microsoft-Windows-IIS-W

    Appreciate your suggestion Dave,
    Any idea what could be cause of this failure.?Do you see anything from the CBS logs.
    This server attached with SNAP drive luns,is there something or SQL application preventing this installation ?
    After reboot it revert the installation...it shows "Failure config service pack..reverting changes,do not not turn off your computer".
    Surprisingly it happens both of our SQL data base server.
    Do you think Increasing MaxNumFilters to
    14 shall work ?
    =====================
    =================================CheckSUR.Log==========
    Checking System Update Readiness.
    Binary Version 6.1.7601.22471
    Package Version 26.0
    2015-02-01 09:37
    Checking Windows Servicing Packages
    Checking Package Manifests and Catalogs
    Checking Package Watchlist
    Checking Component Watchlist
    Checking Packages
    Checking Component Store
    Summary:
    Seconds executed: 555
     No errors detected

  • Windows 2008 R2 SP1 failure Error 800F0818

    We are trying to update ServicePack 1 on a Windows 2008 R2. The update is being executed with WSUS. We tried to download the package from internet and the problem is the same. Error 800F0818.
    Here is the log of System Update Readiness Tool
    =================================
    Checking System Update Readiness.
    Binary Version 6.1.7601.22471
    Package Version 25.0
    2014-07-29 16:30
    Checking Windows Servicing Packages
    Checking Package Manifests and Catalogs
    (f) CBS MUM Corrupt 0x00000000 servicing\Packages\Package_for_KB2685813_SP1~31bf3856ad364e35~amd64~~6.1.1.11.mum  Expected file name Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.mum does not match the
    actual file name
    Checking Package Watchlist
    Checking Component Watchlist
    Checking Packages
    Checking Component Store
    Summary:
    Seconds executed: 310
     Found 1 errors
      CBS MUM Corrupt Total count: 1
    Unavailable repair files:
     servicing\packages\Package_for_KB2685813_SP1~31bf3856ad364e35~amd64~~6.1.1.11.mum
     servicing\packages\Package_for_KB2685813_SP1~31bf3856ad364e35~amd64~~6.1.1.11.cat
    (w) Unable to get system disk properties 0x0000045D IOCTL_STORAGE_QUERY_PROPERTY Disk Cache 

    Checking Package Manifests and Catalogs
    (f) CBS MUM Corrupt 0x00000000 servicing\Packages\Package_for_KB2685813_SP1~31bf3856ad364e35~amd64~~6.1.1.11.mum  Expected file name Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.mum does not match the
    actual file name
    Unavailable repair files:
     servicing\packages\Package_for_KB2685813_SP1~31bf3856ad364e35~amd64~~6.1.1.11.mum
     servicing\packages\Package_for_KB2685813_SP1~31bf3856ad364e35~amd64~~6.1.1.11.cat
    So it seems like you need to fix this.
    As a starting point, I would try simply re-installing the defective update:
    KB2685813: Update for User-Mode Driver Framework version 1.11
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • T410 Windows 7 x64 SP1 Installation Error

    Trying to install SP1 for Windows 7 x64 and each time after it reboots the PC during installation the SP installation reverts itself due to a failure.  Once I'm allowed to log in I get a windows saying Installation was not successful with an unspecified error and an error code: E_FAIL(0x80004005).  The PC hasn't even been configured yet and I'm trying to do the installation from the factory image.  I have tried installing it through Windows update and from the standalone installation file from the microsoft download center.  Neither works and I get the same message.

    Try this and see if it fixes it: http://support.microsoft.com/kb/2530477

  • [windows 2008 R2 SP1] RPC Error 1726 (RPC_S_CALL_FAILED)

    Hi All
    Please do me a favor, thanks.
    Our program is facing RPC error 1726. When client program tried to call RPC call with specific paramters, it failed with
    error 1726 and no logs was outputed by server program. So it seems that this RPC call is not running at server rounine.
    Can you give me some suggestion about this issue ? Thanks.
    Thanks
    Regards
    lewis

    Hi,
    Thanks for your post.
    Did you have any firewall settings?
    Meanwhile, please refer to this KB article for troubleshooting RPC error:
    http://support.microsoft.com/kb/197814
    Regards.
    Vivian Wang

  • Windows 2008 R2 SP1 Windows update not applicable

    HELP!!! We have 3 Windows 2008 R2 servers that were updated with SP1 back in March. Last month we noticed on our Retina audit that the three servers were missing several Windows critical patches that were released after SP1 was applied. WSUS did not report
    any missing patches for those three servers. When we tried to manually apply those missing patches we get the error message "This update is not applicable to your computer". After some troubleshooting we found that KB976932 (Service Pact 1) is not listed in
    installed updates. However, system property shows Windows 2008 R2 SP1 Enterprise Edition. We are certain that SP1 did NOT come pre-installed. Microsoft Baseline Security Analyzer detected no missing patches. Microsoft System Readiness Tool CBA logs show no
    errors. Ran SFC /SCANNOW and found no error also. Force install of the patches with command switch /wuforce, did not work we still get the same message patch not applicable. We compared our servers that are fully patched running Windows 2008 R2 SP1 against
    the three unpatched servers and found several dll and sys file's version to be different. Those dll and sys files are also the files that would have been updated by the critical patches. The only thing different between the fully patched Windows 2008 R2 SP1
    servers and the unpatch are the unpatch have no public internet access. We confirmed patches that were required prior to SP1 push are installed: KB2454826 KB2534366 KB2533552 KB976902 Confirmed: Partition with Windows 2008 R2 SP1 installed is set to "ACTIVE"
    Windows Event Collector service is started Windows Modules Installer is started Uninstalling SP1 is not possible because the KB976932 is not listed and verified "not hidden" in installed updates list. Rebuilding the three servers are the very last option,
    since they are critical. Other than the missing patches.... the servers are running great, we have no reported issues with the three servers. Attempt to reinstall SP1 failed after reboot, error 0X800F0826. If anyone has experience this problem and know of
    a solution please help.

    Hi,
    I would like to confirm that what updates are not applicable for your three Windows Server 2008 R2 SP1 servers?
    Based on the current situation, please run the System Update Readiness Tool as Meinolf Weber mentioned and check the CheckSUR.persist.log for the corrupted
    files. After that, please refer to the following Microsoft TechNet article for how to repair them.
    Advanced guidelines for diagnosing and fixing servicing corruption
    http://technet.microsoft.com/en-us/library/ee619779(WS.10).aspx
    Regards,
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Installing DSEE 7 on Windows 2008 R2 SP1 64-bit does nothing

    Hi All,
    Has anyone been able to install DSEE 7 on Windows 2008 R2 SP1 64-bit? Is it supported?
    I followed the instructions and when run the command (as the Administrator) below nothing happen, it simply return an empty command prompt. Ms VC 2008 Redistributables (the one that come with the archive) is installed.
    dsccsetup.exe war-file-create
    dsccsetp.exe ads-create
    When run the same command using the same archive on Windows 7 64-bit it does prompt for further input or report error.
    Any suggestions or help would be much appreciated.
    Shane L

    Windows 2008 R2 is not listed as a supported OS in the release notes.
    http://docs.oracle.com/cd/E19424-01/820-4805/820-4805.pdf
    It lists:
    Microsoft Windows Server 2008 Standard Edition for x86 and x64 Service Pack 1
    Microsoft Windows Server 2008 Enterprise Edition for x86 and x64 Service Pack 1
    If you are able to go to the next version, it is listed as supported in the release notes for ODSEE 11g:
    http://www.oracle.com/technetwork/middleware/downloads/odsee-11gr1certmatrix-161592.xls
    I have not tried 11g on 2008 R2 myself, but if it is in the certification matrix, it should work.
    Hope that helps,
    Eric

  • Windows 2008 R2 SP1 Exchange DAG event 1196 and 1579 Bad DNS Key

    Hi,
    I'm running an Exchange 2010 SP1 DAG on Windows 2008 R2 SP1.  We are using an INFOBLOX appliance for DNS resolution.
    DNS resolution is working and SRV records are created.
    On one of the two clusternodes I get warning 1579 and error 1196 every 15 minutes.  After looking around on the internet and technet, I found kb 977158 stating the problem and resolution.  However this hotfix is not applicabel on Windows
    2008 R2 SP1 .
    How can I resolve these annoying events?
    Event 1196 failoverClustering:
    Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason:
    DNS bad key.
    Ensure that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server.
    Event 1579 Failover Clustering
    Cluster network name resource 'Cluster Name' failed to update the DNS record for name 'DAG.domain.local' over adapter 'NIC1-LAN'. The error code was 'DNS bad key. (9017)'. Ensure that a DNS server is accessible from this cluster node and contact your DNS
    server administrator to verify the cluster identity can update the DNS record 'DAG.domain.local'.
     Frederik

    Cause:
    The cluster name resource which has been added to the DNS prior to setup active passive cluster ( or any type) need to be updated by the Physical nodes on behalf of the resource record itself. When the active node owns the resources it want to update the
    A record in the DNS database and DNS record which was created won’t allow any authenticated user to update the DNS record with the same owner
    Solution:
    Delete the existing A record for the cluster name and re-create it and make sure select the box says “Allow any authenticated user to update DNS record with the same owner name “Don’t worry about breaking anything , this has “ZERO”
    impact to cluster simply delete the A record and re-create as it is suggested here.
    http://amradmin.wordpress.com/2011/01/27/event-id-1196-1119-dns-operation-refused-cluster-servers/
    Thanks,
    Amr Tantawi |MCITP |EMA

  • Windows 2008 R2 SP1 BSOD

    Hi All,
    Experience BSOD's throughout the business day on an Windows 2008 R2 SP1 x64 terminal server (hosted on an hyper-v 2008 host) but not outside of business hours (thinking its an application / driver issue). Other virtual machines on this host are not experiencing
    the same issue and the host is not impacted (non-hardware failure).
    I've been trying to find out how to diagnose this one by revising the minidump files with WinDBG / 2008R2 symbol files but it keeps coming back to winsys32 as the fault, but can't figure out how to resolve this one.
    If anyone could help with this that would be great.
    Regards
    Allan

    Hi,
    Please try below Hotfix and other related which can help in your case.
    Error message on a blue screen on a computer that is running Windows 7 or Windows Server 2008 R2: "STOP: 0x0000000A"
    http://support.microsoft.com/en-us/kb/979444
    "0x00000050" Stop error and an automatic restart on a Windows Server 2008 R2-based or Windows Server 2012-based computer
    https://support.microsoft.com/en-us/kb/2781406?wa=wsignin1.0
    A Windows Server 2008 R2 Virtual Machine may crash with a blue screen after configuring NLB on it
    http://blogs.technet.com/b/networking/archive/2010/01/29/a-windows-server-2008-r2-virtual-machine-may-crash-with-a-blue-screen-after-configuring-nlb-on-it.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Backing up a windows 2008 R2 sp1 server to a NAS drive

    Hi,
    In windows 2008 R2 sp1 which is in a domain name xyz.com, we need to take the full backup to a shared folder in a NAS Drive which is in a workgroup ( not joined to the domain xyz)
    When run the backuponce option in the windows server backup , it is getting backed up when the credentials for accessing the shared folder in a NAS Drive is provided during the time of backup.
    But when scheduling the backup , I am getting the error as follows
    I am using domain user id for scheduling the backup and other credentials to access the NAS shared folder
    in other words how to get this option as below during the scheduling backup to exclude the above warning
    Any help is greatly appreciated
    Thanks & Regards S.Swaminathan Live & let others live!!!

    Hi
    Thanks for all for your valuable suggestion ,
    At last I succeeded in configuring the scheduled backup through creating the scheduled task by creating a batch file  with the following command:
    net use y: \\ipaddress\sharedfolder name /username:xyz abc
    Wbadmin start backup -backupTarget:\\[Server]\[Share name] -include:C:,E: -vssFull -quiet -allcritical
    Variables in the command are 1.ipaddress 2.sharedfoldername 3.username 4.password 5. the drives letters 6. the mapped drive letter in the net use command
    These variables have to be taken care for anybody to use
    And thanks to Darren too ...... The scheduled task is to be run with the hghest privilege
    username and password mentioned in the above lines are the credentials to connect to the shared folder in different NAS Drive which is located out of the domain
    Thanks & Regards S.Swaminathan Live & let others live!!!

  • LSASS.exe utilizing 3 GB of RAM on Windows 2008 R2 SP1 - MS Dynamics AX 2012 application server (it's not a DC)

    Hi guys,
    Does anyone know why would lsass.exe be using 3 GB of RAM on an application server with 8 GB of RAM in total running on Windows 2008 R2 SP1? Is this something I should log with Microsoft support?
    Thanks
    Zoran

    Hi we experienced the same issue. but im not able to reproduce it on the second server.
    We got two member servers both in the same configuration Windows 2008R2 SP1 STD hosting Axapta AOS.  the first server is experiencing the Lssas memory leak (we got a little bit more memory then you but it consumes 5,6GB form 6GB
    total RAM) the second one not. both servers are VM hosted on hyper-v 2012 cluster. the only difference betwean them is instaled Avast Antivirus, but we have a testing environment (single VM server with identical deployment with Avast also installed) and
    it does not seems that the Avast is the cause.
    can anybody please point us how to troubleshoot lsass memory leaks on member servers not DCs, becouse the event logs does not show anything interesting about the couse, but are full of errors about what i see as consequences of low memory condition.
    Thanks in advance Martin Stejskal

  • TS130 Crash - HyperV - Windows 2008 R2 SP1

    Hello,
    Sry for my english. Im from germany.
    We have a ts130 server with hyper-v windows 2008 r2 sp1 with two windows 2008 r2 sp1 vm's. We have 4 x 4 GB ram. The server run for the last 3 month, after complete new installation, without any problems, then the server crashes every day one time, without any information why. No image on scree, no reaction num key. We must do a hardreset...The onboard raid controller do a completed repair and review till 100% after starting windows and everything is fine. We become two new HDD's and we replace it. The server run 2 weeks and then crash, same problem. after every crash the onboard raid controller do a completed repair and review. Then lenovo replace the mainboard and the power unit with bios update, but the last 2 days, the server crash again one time a day.I dont know what we should do. Can anyone help us?
    Peter

    Hi, I have the same problem as you have.
    Currently, I have Centos 6 installed with VirtualBox, but I have had this problem with other Ubuntus and Windows. After a while, sometimes 2 weeks, sometimes 2 hours, the system stop without showing any info on the screen and no reaction on keyboard (Bloq Num) as Cordial said. We have to do a hard reset and there is nothing in the linux logs, it only stops working.
    I've try with soft raid, hardware raid, no raid, different HDDs, different OS, virtualization with VBox, KVM, VMWare VSphere, no virtualization, different RAM modules from different brands, a new power supply, changing BIOS options, ... Nothing solve the problem.
    The integrated network card even blocked my switch when the server crash, so i start using a PCI one and disabled the integrated in the BIOS. The problem with the switch disapeared, but not the crash. At least other computers on the switch are working.
    I've been trying to put this server in production for more than a year, but it's impossible.
    Could somebody help with that? I've no idea what to do now.

  • Office 2013 and Windows 2008 R2 SP1 AD RMS

    Hi All,
    I have installed Windows 2008 R2 SP1 AD RMS service, and it works well with Office 2010/2007, does not however work with office 2013, below is the error I get:
    sorry, something went wrong opening information rights management protected content. the request is not supported
    I have added the  AD RMS cluster URL and the AD RMS licensing URL to the loacl Intranet security zone (http://realercheng.wordpress.com/2013/01/23/office-2013-failed-to-create-and-consume-protected-content-with-connect-to-digital-rights-mangement-services-and-get-template/),
    however, I still get the same error.
    Does Office 2013 work with Windows 2008 AD RMS, and if it does what is the issue here and how do I go about sort it?
    KimaniBob

    Hi,
    Im am using server 2008 r2 sp1 and users are using windows 7 enterprise, office 2010 pro. plus. They can see right policy
    template with office 2010. 
    But now I have installed office 2013 pro. plus and added new admx files to new gpo for office 2013 also enabled this policy
    "Enter Permission Policy Default Server for Quick Access Toolbar" and this is writing in the policy \\serverhostname But I cant receiving ad rms templates from my outlook? 
    Is server 2008 r2 sp1 ad rms compatible with office 2013 or am I have to install server 2012 ad rms for office 2013?
    How can I fix this problem?
    Thanks.

  • Installing Adobe Dreamweaver CS5.5 and PhotoShop 5.5 on windows 2008 R2 SP1 using Terminal services

    Hi All,
    Is it possible to install Adobe Dreamweaver CS5.5 and PhotoShop 5.5 on windows 2008 R2 SP1 using Terminal services. We are planning to use xenapp to publish these application.
    Please let me know if this is a supported environment.
    Regards
    Radhika

    As far as I know you will NOT be able to access OpenGL functionality through Terminal Services. as the OpenGL implementation provided in that environment is software, version 1.1 - not GPU-accelerated.
    I seem to recall there was a thread about a year ago here where someone was trying to do what you are asking.  I vaguely remember they were able to make it work, but I'm not sure.  You might try doing a search of this forum.
    -Noel

  • Static DNS record deleted automatically- Windows 2008 R2 SP1

    Hi,
    I have scoured the Interweb and tried all suggestions to no avail for this one. Here's the scenario:
    My client has a Windows 2008 R2 SP1 (Windows 2003 domain/forest functional level) server which is a DC and DNS server. The problem is that a DNS record for an Exchange 2010 server is getting deleted every 10 or 40 minutes. This started occurring for no obvious
    reason a few weeks ago. The impact is that users cannot connect to Exchange (caching does not seem to help with this, which is odd). I disabled scavenging, which did not resolve the issue. I enabled auditing and found a 4662 event revealing that the domain
    administrator account was deleting the server A record (and pointer record). Why this is happening is what I am trying to investigate next: possible bug? The zone is configured as non secure- maybe making it securing it would help? But this does not explain
    why the record is being deleted. There is no NIC teaming implemented, which I understand can cause issues. 
    As an interim measure I created a script employing dnscmd that recreates the record every 15 minutes, which works for the most part, but not always, which is why I added a deny permission on the record for the domain Administrators group, seems so far to
    have prevented the record from being deleted.
    Any advise on the cause of this and how to investigate why the record is being deleted will be much appreciated!

    Hi- thanks for that. However I have seen those links and already followed them: I turned off scavenging (default 7 day configuration) and the record still gets deleted (scavenging date is not due till a later data in any case). Also the record is static
    so it would not get scavenged? The option to delete the record if stale is unchecked.
    I already enabled auditing and identified event 4662, which identified that the domain administrator account that is deleting the record:
    Log Name:      Security
    Source:        Microsoft-Windows-Security-Auditing
    Date:          8/01/2014 11:47:25 AM
    Event ID:      4662
    Task Category: Directory Service Access
    Level:         Information
    Keywords:      Audit Success
    User:          N/A
    Computer:      DC.domain.com.au
    Description:
    An operation was performed on an object.
    Subject :
    Security ID:
    DOMAIN\administrator
    Account Name:
    administrator
    Account Domain:
    DOMAIN
    Logon ID:
    0x2e1b093
    Object:
    Object Server:
    DS
    Object Type:
    dnsNode
    Object Name:
    DC=EXCHANGEHOST,DC=domain.com.au,CN=MicrosoftDNS,CN=System,DC=domain,DC=com,DC=au
    Handle ID:
    0x0
    Operation:
    Operation Type:
    Object Access
    Accesses:
    Write Property
    Access Mask:
    0x20
    Properties:
    Write Property
    {771727b1-31b8-4cdf-ae62-4fe39fadf89e}
    {e0fa1e69-9b45-11d0-afdd-00c04fd930c9}
    {d5eb2eb7-be4e-463b-a214-634a44d7392e}
    {e0fa1e8c-9b45-11d0-afdd-00c04fd930c9}
    Additional Information:
    Parameter 1:
    Parameter 2:
    Please advise!
    Thanks
     

Maybe you are looking for

  • Does lion server support a single email address across multiple devices??

    I am looking to move from an outdated Microsoft Exchange Server 2003 to OS X Lion Server but I am unsure as to how Lion will handle email. I do not want to spend money on a new windows server if I can get a Mac Mini Server to do the job. I am a very

  • Delivery for a particular customer

    Is it possible to create delivery for a particular customer on specific dates we want? How we will do it in SAP if possible? thanks

  • Steps to create a Restricted Key Figure

    Hi, I am trying to create a  BEx Query and want to create a Restricted Key Figure. I am using BEx 7.x. Please help me with steps to create a Restricted Key FIgure. Thnaks and Regards, Shreyas Shah

  • Wrap with toad

    Hi all. I just wraped a update file with toad 9.7.2.5. (utilities>wrap code) but the result ".plb" file is not really wrapped. I choose "open with" select notepad or any text editor and booom!! the code is readable.. what am I doing wrong? regards!

  • Error in creating table space

    BR0370I Directory /oracle/NW4/sapreorg/sdybsgtj created BR0280I BRSPACE time stamp: 2008-06-05 10.12.05 BR0301E SQL error -1587 at location BrCtlCopy-1, SQL statement: '/* BRSPACE */ ALTER DATABASE BACKUP CONTROLFILE TO '/oracle/NW4/sapreorg/sdybsgtj