Windows 2008 R2 Standard 32 bit

Hello
We need Windows 2008 R2 Standard 32 bit.
So please convert Windows 2008 R2 Standard 64 bit to Windows 2008 R2 Standard 32 bit.
Regards
Sunil Bagle

hi
You cannot convert a x64 bit OS to a 32 bit version, you will need to contact a reseller in your area to assist you with the media if you have a license.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
Farid

Hi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet

Which version of Oracle database is certified on Windows 2008 R2 ( 64-bit)

We have a Microsoft Windows 2008 R2 (64-bit) server.
I wanted to know which Oracle database version is 100% certified on the above OS.

Hi Sirini;
10.2.0.5 is supported - see MOS Doc 1061272.1 (Statement of Direction: Oracle Database 10g Release 2 Client (10.2.0.5) with Microsoft Windows 7 and Windows Server 2008 R2)Correct;
11gR2 is also supported - see MOS Doc 867040.1 (Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2)There is a setup on this link:
Oracle Database 11g Release 2
(11.2.0.1.0)
Microsoft Windows (x64) File 1, File 2 (2GB) See All
I am little bit confused for this, as you mention note and also certification matrix says 11gr2 certfied with Win2008-64 bit. But there is no specific setup like win2008-64 bit, there is only Microsoft Windows (x64) setup
By the way for 10gR2 on win 2008 64 bit platform there are 2 setups. Those are:
Oracle Database 10g Release 2
Oracle Database 10g Release 2 (10.2.0.4) for Microsoft Windows Vista x64 and Microsoft Windows Server 2008 x64
Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows (x64)
So i had issue for my client and oracle worker support me to use 10.2.0.4 for my issue, not second setup. So for 11gR2 could be work for Microsoft Windows (x64) but i am not sure %100 coz never tried before.
i appreciate, If someone share their experience to make installation 11gR2 on win2008-64 bit wiht Microsoft Windows (x64) setup
All those upper setups can be found at:
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
I do not believe 11gR1 is currently certified with Win 2008 R2.Please check below link:
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
Oracle Database 11g Release 1 Standard Edition, Standard Edition One, and Enterprise Edition
(11.1.0.7.0)
Microsoft Windows Server 2008 (32-bit) (1.9 GB) | See All
Microsoft Windows Server 2008 x64 (1.9 GB) | See All
Regard
Helios

Windows 2008 R2 Standard side by side error

I have a Dell Poweredge 310 running Windows 2008 R2 Standard. I have update the bios to the latest version and the bios update did take but now all of my 32bit software will not run. I receive the error “The application has failed to start because its side-by-side
configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail”
I have looked over other posts and most have stated to install the C++ redistribution 2008. I was able to install the 64 bit version but I cannot install the 32bit version. I receive the error “The application has failed to start because its side-by-side
configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.”
So I am not able to install any 32bit software. I have tried to enable the WOW64 feature with the command DISM /online /enable-feature/featurename:ServerCore-WOW64 but get this Error: 0x800f080c Feature name ServerCore-WOW64 is unknown.
I have also tried to use this command to setup WOW64 start /w ocsetup ServerCore-WOW64 I get this “The specified windows component could not be found: ServerCore-WOW64.
I have looked at the .Net 3.5 that comes installed in the Windows Features and it is installed. I do not want to uninstall and reinstall the feature because it will take down the AD and I really do not want to rebuild the AD
Is there some setting I am missing?

Airwikg
You can refer the following similar thread solution to do the further troubleshooting:
SideBySide errors event ID 33
https://social.technet.microsoft.com/Forums/windows/en-US/db028072-a3b7-46f5-981e-b40d9f7d0fa8/sidebyside-errors-event-id-33?forum=w7itproappcompat
The application has failed to start because its side-by-side configuration is incorrect’ error related to MMC.EXE programs and weird cause & simple solution
http://blogs.msdn.com/b/cesardelatorre/archive/2011/03/27/the-application-has-failed-to-start-because-its-side-by-side-configuration-is-incorrect-error-related-to-mmc-exe-programs-and-weird-cause-amp-simple-solution.aspx
Can any kind expert out here help me diagnose what is wrong under event viewer. Details below.
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/can-any-kind-expert-out-here-help-me-diagnose-what/8b542c41-a8b6-4f52-adf4-efdfb2378a1a
More information:
About Side-by-Side Assemblies
https://msdn.microsoft.com/en-us/library/windows/desktop/ff951640%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

LMS 4.0 eval on 180-day Windows 2008 Server Standard R2 SP1 eval

I'm having difficulties installing the LMS 4.0 eval on an 64-bit 180-day Windows 2008 Server Standard R2 SP1 eval.
The installer says that it needs 2008 Server Enterprise, but the LMS 4 release notes say 2008 Server Standard works. It also says that R1 is supported, but makes no specific reference to R2. I'm assuming that if R1 is supported, R2 would be supported as well, no?

You need to install a patch for this OS support:
http://www.cisco.com/cisco/software/cart.html?imageGuId=DB56D2FEE377F4846A9F42F81C48EAC18C2C9967&i=rs
CiscoWorks_LMS_4.0.x_WIN2K8_R2.exe
Make sure you follow the install instructions in the readme

Windows 2008 server 32 bit support

Hello,
Is MaxDB officially supported for Windows 2008 server 32 bit platform?
Thanks,
Jose

Jose Lopez wrote:>
> OK, then perhaps mention specifically W2003 in the download link?
Hmm... about what download link are you talking?
The one in the download area here in SDN?
If so, then this is not relevant for SAP customers as they should get all their software via DVD delivery or the Service Marketplace downloads!
In the service marketplace download sections there are no restrictions given, since the Product Availability Matrix (https://service.sap.com/pam) contains all the release/support information.
In general, the PAM is the one single place to check for supported versions.
regards,
Lars

Windows 2008 server (64 bit) setup not starting?

To all,
Windows 2008 server (64 bit) setup not starting? downloaded v17228-01-2of2 and v17228-01-1of2? Any ideas why the installer not starting?

Installing oracle database 11g( 64bit) on a windows 2008 server (64bit). I do not get the setup tool to start
Downloaded
Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64 (Part 1 of 2) V17228-01 Part 1 of 2
and
Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64 (Part 2 of 2) V17228-01 Part 2 of 2
Edited by: user731811 on Oct 14, 2010 1:11 PM

EPMA 11.1.2.1 config on windows 2008 R2 64 Bit

Have issue's with EPMA 11.1.2.1 config on windows 2008 R2 64 Bit ,
RDBMS : SQL 2008 R2 64 bit (pre config SQL tasks compalted)
IIS 7.0
IPV 6 disabled to resolve binding issue
EPMA services are up and running but
Diagnostic Log:
Following components are failed in the diagnostic log, all of them have same message.
EPMA service is working
AppMgrLoadAdf
DimEditorLoadAdf
EnumApplications
EnumDataSyncs
EnumDimensions
Launch external checker with next command: D:\Oracle\Middleware\EPMSystem11R1\..\jdk160_21/bin/java -DEPM_ORACLE_HOME=D:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=D:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=D:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.appmanager.AppMgrLoadAdf
Error: AppMgrLoadAdf failed when requesting information from EPMA. Please check that all EPMA services have started and are currently running.
Recommended Action: Make sure external checker is working.
Error in Workspace for EPMA:
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with POST method: 503
Recommended Action: Check application is started.
Any suggestion are appreciated, i am running against wall on this error.
Thanks

Check the logs for "Hyperion EPMA Web Tier - Web Application" and "Hyperion EPMA Data Synchronizer - Web Application"
e.g. <MIDDLEWARE_HOME>\user_projects\<instancename>\diagnostics\logs\services - HyS9EPMAWebTier-sysout.log, HyS9EPMAWebTier-syserr.log, HyS9EPMADataSynchronizer-sysout.log, HyS9EPMADataSynchronizer-syserr.log
Cheers
John
http://john-goodwin.blogspot.com/

Oracle Database 11.2.0.1.0 CPU hit 100% on Windows 2008 R2 64 bit Hyper-V

Oracle Environment Detail:
Oracle Database Enterprise Edition :11.2.0.1.0 (NON RAC, No failsafe)
O/S:     Windows 2008 R2 64 bit (6.1)
Specifics: Virtual Server using Hyper-V
Memory: 9 GB RAM
Processor: E5540
Specific about the issue:
I have two database instance created on this server with ‘memory_target=3600M’ each.
I am getting into an issue where I find NO activity on database except regular schedule job running using DBMS_SCHEDULER –
•     Database FULL export DAILY schedule time 7 & 7:30 PM accordingly for both instance (takes about 15-20 mins each)
•     Database FULL RMAN DAILY schedule time 9 & 10 PM accordingly for both instance (takes about 35-40 mins each)
This was set up on Feb 25th 2011. Since then we have encounter CPU hit 100% TWICE in this system at around 8:30 PM (SAME TIME). Both database instance exports keep running and never finish. While RMAN schedule job has NO problem. Mostly everything runs every smoothly without any issue.
Replicate the issue:
I am unable to replicate this issue and do not know the cause of the issue.
Work Around:
Oracle services shutdown/Server reboot.
Would anyone know about this issue? Have any information could help? This system will become production soon and want to make sure we have solution for this.
Thanks in advance!

I am finding that CPU hit 100% is very specific to Oracle 11.2.0.1.0 Export Utility (exp) used to take FULL database export. I understand Original Export is desupported from general use as of 11g but available for specific need.
Have anyone faced this issue with 11.2.0.1.0 Export Utility (exp)? Please help.
I have a need to use export utility which gives us migration options.
Thanks!

Smart View 11.1.1.3.500 Install on Windows 2008 R2 64 Bit SP1

Wanted to check if any one form user community was able to install Samrtview 11.1.1.3.5 on Windows 2008 R2 64 bit SP1
Think support matrix says its compatible with windows 2008 64 bit but not R2 - Any round about solutions to get his installed on R2 would help.

I have tried in Server 2008 R2, i did not face any issues, again i did not use that extensively

OBIEE 11.1.1.6.0 installation on windows 2008 R2 64 bit failing

I installed OBIEE 11.1.1.6.0 version on windows 2008 R2 64bit;installation has no issues all went well and sample app displayed fine.But, i see scheduler is not starting and also we deployed our code but reports failing with following oracle oci error
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: The specified module could not be found. [nQSError: 46029] Failed to load the DLL D:\OBI11G\Oracle_BI1\bifoundation\server\bin\nqsdbgatewayoci10g64.dll. Check if 'Oracle OCI 10G' database client is installed. (HY000)
i also installed and verified by installing 11g client;PATH variable setting etc. no exact solution.i would like to see if any other also facing same issue with OBIEE 11.1.1.6 on windows 2008 R2 64 bit OS.
Thanks

Deva
i didnt get what you mean by rpd client.,if you mean Admin tool, installation is OBIEE 'simple installation' type which includes Admin tool.
coming to connectivity, no from physical layer you cannot view data as the packaged dll file (nqsdbgatewayoci10g64.dll ) is not registering in Windows 2008 64 bit,which i even tried manually.
since above step is failing, i also installed a 11g db client(to divert oci connections) which is working fine for oracle connectivity and updated PATH environment variables but this issue is still in place.. as reports still pointing to Oracle_BI1/bifoundation/server/bin/ dll files
please share your thoughts

CF 10 continues to crash on Windows 2008 R2 64 bit

I have had CF 10 running on my VM for about a week now. The VM is Windows 2008 Enterprise, 64 bit. CF 10 is 64 bit. The error that I keep getting is:
Service Temporary Unavailable!
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Jakarta/ISAPI/isapi_redirector/1.2.32 ()
To recover, I need to stop and restart all the CF services.
Anyone else having this problem or has anyone else had to fix it?

Of interest here are some CF10 metrics logging I took as a sample to compare.
05/06/2012
8:49 AM
Information
scheduler-1
Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 378536 Request count: 201 Error count: 4 Bytes received: 780 Bytes sent: 6993022 Free memory: 45875240 Total memory: 175702016 Active Sessions: 0
05/06/2012
8:48 AM
Information
scheduler-2
Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 378536 Request count: 201 Error count: 4 Bytes received: 780 Bytes sent: 6993022 Free memory: 47207152 Total memory: 175702016 Active Sessions: 0
05/06/2012
8:47 AM
Information
scheduler-0
Max threads: 150 Current thread count: 4 Current thread busy: 1 Max processing time: 333509 Request count: 200 Error count: 4 Bytes received: 780 Bytes sent: 5695004 Free memory: 52128072 Total memory: 175898624 Active Sessions: 0
05/06/2012
8:46 AM
Information
scheduler-1
Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 333509 Request count: 200 Error count: 4 Bytes received: 780 Bytes sent: 5695004 Free memory: 59819016 Total memory: 167116800 Active Sessions: 0
05/06/2012
8:45 AM
Information
scheduler-1
Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 333509 Request count: 200 Error count: 4 Bytes received: 780 Bytes sent: 5695004 Free memory: 61154744 Total memory: 167116800 Active Sessions: 0
05/06/2012
8:44 AM
Information
scheduler-1
Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 333509 Request count: 200 Error count: 4 Bytes received: 780 Bytes sent: 5695004 Free memory: 62484720 Total memory: 167116800 Active Sessions: 0
05/06/2012
8:43 AM
Information
scheduler-2
Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 333509 Request count: 200 Error count: 4 Bytes received: 780 Bytes sent: 5695004 Free memory: 63821448 Total memory: 167116800 Active Sessions: 0
05/06/2012
8:42 AM
Information
scheduler-2
Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 333509 Request count: 200 Error count: 4 Bytes received: 780 Bytes sent: 5695004 Free memory: 65154032 Total memory: 167116800 Active Sessions: 0
05/06/2012
8:41 AM
Information
scheduler-1
Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 333509 Request count: 200 Error count: 4 Bytes received: 780 Bytes sent: 5695004 Free memory: 66487544 Total memory: 167116800 Active Sessions: 0
05/06/2012
8:40 AM
Information
scheduler-0
Max threads: 150 Current thread count: 4 Current thread busy: 0 Max processing time: 333509 Request count: 200 Error count: 4 Bytes received: 780 Bytes sent: 5695004 Free memory: 67824496 Total memory: 167116800 Active Sessions: 0
The online CF10 documentation omits CF10 metrics logging details so I am not sure what to make of the log detail differing. Reference:
http://help.adobe.com/en_US/ColdFusion/10.0/Admin/WSc3ff6d0ea77859461172e0811cbf3638e6-7fe 0.html#WSc3ff6d0ea77859461172e0811cbf3638e6-7fda
I don't think the logs have been any use so far. Still interested to know why CF10 is crashing for you. Something else comes to mind. Is it possible for you to run CF10 from CMD prompt for a time, ColdFusion10\cfusion\bin\cfstart.bat ? Perhaps there is an error and having the details displayed in CMD prompt will lead to solution.
HTH again, Carl.

Oracle 10g HTTP Web Server on Windows 2008 R2 (64-bit) server.

I downloaded the Oracle 10g HTTP server for Windows 2008 R2 (64-bit) from the link below
http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html
10204_vista_w2k8_x64_production_companion.zip (344,455,851 bytes)
Did anyone have luck installing the 10g HTTP server on a Windows 2008 R2 (64-bit) server ?
I could see the installation went fine, but I don't see any "Oracle_HTTP" windows service getting created.

I have not installed on this OS but I'm betting the service is a different name.
Check "log on as" under services to narrow your search

Win64_11gR2 on windows 2008 r2 64 bit

Hi,
I'm trying to install oracle database onto a vanilla windows 2008 r2 64 bit machine with windows firewall turned off and no AV installed. The version I have downloaded is labelled win64_11gR2_database_1of2 and 2of2. I have copied the contents of 2of2 into 1of2. As soon as I couble-click (or right click run as administrator) the setup, a cmd window flashes for a split second. I managed to get a screen shot which showed it was trying to launch Oracle Universal Installer from a temp directory in C:\Users\Administrator\AppData\Local\Temp\2\.......
I have installed the latest version of JRE 64 bit. I also tried installing java to a directory without any spaces and have tried launching the setup from command pointing to the new java install folder.
I have tried launching the setup from command using the skip system requirements command but no luck there either.
I have tried running the OUI from within the install directory but it does the same thing.
I must have read through about 50 pages of forums and none of the solutions have worked.
Any help would be much appreciated.

Hi,
Thanks for the suggestions. My server hardware is more than the minimum requirements. It's not a fancy setup, just a standalone physical box with a blank copy of windows and JRE installed. I can't see any other pre-requisite tasks that would apply. If there is any other software I need to install first, I can't see it on that page. In terms of the log file, I could find a install actions in the C:\Users\Administrator\AppData\Local\Temp\2\...... directory which only gave this info.
Using paramFile: C:\Install\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
The number of files bootstrapped for the jre is 0.
The number of files bootstrapped for the oui is 0.
Helios - I can't see if that was supposed to be a link. Could you repost it please?
Thanks

Can't install 64-bit DAC on Windows 2008 R2 64-bit

Hi all,
When I attempt to run the 64-bit DAC setup.exe installer (either from the root folder or from win64), I get the following:
Checking swap space: must be greater than 150 MB . Actual 3319 MB Passed
Checking monitor: must be configured to display at least 256 colors Higher than 256 . Actual 65536 Passed
Preparing to launch Oracle Universal Installer from D:\temp\OraInstall2011-08-2_03-11-12PM. Please wait ...
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//COPYRIGHT.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//LICENSE.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//LICENSE.rtf.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//README.html.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//README_ja.html.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//README_zh_CN.html.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//THIRDPARTYLICENSEREADME.txt.
I've tried to download the ZIP file a number of times and I've tried this on a number of Windows 2008 R2 64-bit machines, all with the same result. I'm able to run the 32-bit installer without error.
There's a similar post already on here that suggests using compatibility mode but nothing I've tried has enabled me to install 64-bit DAC on a 64-bit Windows 2008 R2 machine.
Has anyone successfully achieved this?
Thanks!
mroshaw

Doc Id: ID 849658.1
Alert : DAC 10.1.3.4.1 64-bit universal installer fails/hangs on Windows 64-bit and Linux 64-bit
"The issue is 32-bit OUI installer is used for all DAC 10.1.3.4.1 installation which fails during verification/checks on 64-bit machine. It's Installer check which fails, DAC files are fine for 64-bit OS."

Windows 2008 R2 Standard 32 bit

Similar Messages

Maybe you are looking for