Windows 2008 R2 Standard side by side error

I have a Dell Poweredge 310 running Windows 2008 R2 Standard. I have update the bios to the latest version and the bios update did take but now all of my 32bit software will not run. I receive the error “The application has failed to start because its side-by-side
configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail”
I have looked over other posts and most have stated to install the C++ redistribution 2008. I was able to install the 64 bit version but I cannot install the 32bit version. I receive the error “The application has failed to start because its side-by-side
configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.”
So I am not able to install any 32bit software.  I have tried to enable the WOW64 feature with the command DISM /online /enable-feature/featurename:ServerCore-WOW64 but get this Error: 0x800f080c Feature name ServerCore-WOW64 is unknown.
I have also tried to use this command to setup WOW64  start /w ocsetup ServerCore-WOW64 I get this “The specified windows component could not be found: ServerCore-WOW64.
I have looked at the .Net 3.5 that comes installed in the Windows Features and it is installed. I do not want to uninstall and reinstall the feature because it will take down the AD and I really do not want to rebuild the AD
Is there some setting I am missing?

Airwikg
You can refer the following similar thread solution to do the further troubleshooting:
SideBySide errors event ID 33
https://social.technet.microsoft.com/Forums/windows/en-US/db028072-a3b7-46f5-981e-b40d9f7d0fa8/sidebyside-errors-event-id-33?forum=w7itproappcompat
The application has failed to start because its side-by-side configuration is incorrect’ error related to MMC.EXE programs and weird cause & simple solution
http://blogs.msdn.com/b/cesardelatorre/archive/2011/03/27/the-application-has-failed-to-start-because-its-side-by-side-configuration-is-incorrect-error-related-to-mmc-exe-programs-and-weird-cause-amp-simple-solution.aspx
Can any kind expert out here help me diagnose what is wrong under event viewer. Details below.
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/can-any-kind-expert-out-here-help-me-diagnose-what/8b542c41-a8b6-4f52-adf4-efdfb2378a1a
More information:
About Side-by-Side Assemblies
https://msdn.microsoft.com/en-us/library/windows/desktop/ff951640%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Windows 2008 r2 standard getting blue screen error

    hi  getting below error & server getting auto shutdown pls suggest. 
    Problem signature:
      Problem Event Name: BlueScreen
      OS Version: 6.1.7601.2.1.0.272.7
      Locale ID: 1033
    Additional information about the problem:
      BCCode: 124
      BCP1: 0000000000000007
      BCP2: FFFFFA80070E5AE8
      BCP3: 0000000000000000
      BCP4: 0000000000000000
      OS Version: 6_1_7601
      Service Pack: 1_0
      Product: 272_3
    Files that help describe the problem:
      C:\Windows\Minidump\091114-17082-01.dmp
      C:\Users\Administrator\AppData\Local\Temp\2\WER-749506-0.sysdata.xml
    Read our privacy statement online:

    Hi,
    Thank you for posting in Windows Server Forum.
    Sorry for late response. Please try to install below Hotfix and also check the article for details.
    Error message on a blue screen on a computer that is running Windows 7 or Windows Server 2008 R2: "STOP: 0x0000000A"
    http://support.microsoft.com/kb/979444
    Windows Kernel event ID 41 error "The system has rebooted without cleanly shutting down first" in Windows 8.1, Windows 8, Windows Server 2012 R2, Windows Server 2012, Windows 7, or Windows Server 2008 R2
    http://support.microsoft.com/kb/2028504
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Installing CCB 2.3.1 on Windows 2008 R2 Standards 64 bit Edition Error

    i Installed the Micro Focus Server v5.1 and java 1.6._23 build , Activer Perl 64 all are 64 bit software, all software are installed.
    When i run the CCB server i am getting the follwing Exception
    this is one Exceptio
    1. C:\opt\MicroFocus\Bin\CBLJVM_SUN.DLL: Can't load IA 32-bit .dll on a AMD 64-bit platform
    The other Exception are here
    - 2011-05-10 21:06:04,336 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) Exception in thread "Remote JVM:3 Thread 1" java.lang.UnsatisfiedLin
    kError: <h1>no cbljvm_sun in java.library.path</h1>
    - 2011-05-10 21:06:04,446 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1734)
    - 2011-05-10 21:06:04,555 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at java.lang.Runtime.loadLibrary0(Runtime.java:823)
    - 2011-05-10 21:06:04,664 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at java.lang.System.loadLibrary(System.java:1028)
    - 2011-05-10 21:06:04,774 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at com.microfocus.cobol.RuntimeSystem.<clinit>(Unknown Source)
    - 2011-05-10 21:06:04,883 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at com.splwg.base.support.cobol.host.CobolThread.run(CobolThre
    ad.java:30)
    - 2011-05-10 21:06:13,790 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) java.lang.RuntimeException: No command runner was registered with th
    is remote JVM after waiting 10000ms
    - 2011-05-10 21:06:13,790 [JVM 3 INFO logger] INFO (cobol.host.ProcessLogger) - 2011-05-10 21:06:13,790 [Remote JVM:3 Main ] INFO (cobol.host.Re
    moteJVM) Shutting down loggers and exiting Remote JVM 3
    - 2011-05-10 21:06:13,899 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at com.splwg.base.support.cobol.host.RemoteJVM.waitForServerTo
    RegisterRunner(RemoteJVM.java:163)
    - 2011-05-10 21:06:14,008 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at com.splwg.base.support.cobol.host.RemoteJVM.main(RemoteJVM.
    java:121)
    - 2011-05-10 21:06:15,290 [pool-2-thread-1] ERROR (cobol.host.OptimizedRemoteExecuterStub) An exception occurred invoking remote command.
    - 2011-05-10 21:06:15,290 [pool-2-thread-1] INFO (cobol.host.RemoteJVMConnectionImpl) Connection to JVM 3 being shunned
    - 2011-05-10 21:06:15,290 [pool-2-thread-1] ERROR (cobol.host.RemoteJVMConnectionImpl) An exception has occurred calling the remote JVM
    - 2011-05-10 21:06:15,290 [pool-2-thread-1] ERROR (cobol.host.RotatingCommandRunnerProvider) Caught exception in Remote JVM connection housekeeper:
    com.splwg.base.support.cobol.host.InputClosedException:
    The following stacked messages were reported as the LoggedException was rethrown:
    com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.sendRequestGetResponse(OptimizedRemoteExecuterStub.java:83): An exception has occurred c
    alling the remote JVM
    com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.sendRequestGetResponse(OptimizedRemoteExecuterStub.java:83): An exception occurred invok
    ing remote command.
    2011-05-10 21:04:47,084 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (shared.context.ContextLoader) Disc
    overing lookups for ccb
    - 2011-05-10 21:04:47,521 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (shared.context.ContextLoader) Done
    discovering ccb lookups (generated=486, manual=126), time 443.179 ms
    - 2011-05-10 21:04:47,834 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] WARN (shared.environ.ContextManagedObjec
    tSet) Could not load resource com/splwg/cm/domain/contextManagedObjects.xml on classpath. This may be harmless but could mean a problem with the clas
    spath. Please verify that the classpath for application cm is correctly configured.
    - 2011-05-10 21:05:02,490 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) Re
    gistering lookups
    - 2011-05-10 21:05:03,334 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) 66
    2 lookups registered, time 841.526 ms
    - 2011-05-10 21:05:03,334 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ComponentContainer
    LookupHelper) Initializing constants on 696 lookup interface classes
    - 2011-05-10 21:05:04,037 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ComponentContainer
    LookupHelper) Done initializing lookup constants, time 710.220 ms
    - 2011-05-10 21:05:04,037 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) Re
    gistering Entities
    - 2011-05-10 21:05:08,022 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) 89
    8 entities registered, time 3,979.833 ms
    - 2011-05-10 21:05:08,022 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) Re
    gistering Code Description queries
    - 2011-05-10 21:05:08,022 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) 52
    code/description queries registered, time 0.079 ms
    - 2011-05-10 21:05:08,022 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) Re
    Edited by: sivaram on May 10, 2011 9:24 PM

    Got it .problem is environment path settings.

  • Installing Dirsync on Windows 2008 Server Standard FE

    Hello all,
    I need to Dirsync my only domain controller i have to Office 365.  My server is a Windows 2008 Server Standard FE.  I installed all requirement for dirsync to be installed (and all Windows updates also) and i still get an error when trying to install
    (Says my Powershell is not at least 2.0, but it is...) 
    Anyone tried to install Dirsync on that kind of server ? (and made it work?)
    Regards,

    It is
    required to update to Windows Management Framework 3.0 or Powershell 3.0 if you are installing DirSync on Windows 2008 R2.  I believe the same applies to 2008 SP1 as well.
    Also, I've heard of issues where non-English versions don't properly detect the presence of PowerShell.  You may want to temporarily change your regional format  to English to test this, if this applies to you.
    Mike Crowley | MVP
    My Blog --
    Planet Technologies

  • Windows 2008 R2 Standard- "Access Denied"

    Hello All,
    I have Windows 2008 R2 Standard, Terminal Services role has been installed on that server.
    I am getting "Access Denied" Error when trying to access the server using mstsc, command i am using from Start-Run - "mstsc /v server1",
    But when i use "mstsc /admin /v server1" i am able to login to server.
    Please suggest!
    MCP, MCTS

    Hi,
    Thank you for posting in Windows Server Forum.
    In addition to TP comment you can also check below mention article for more information.
    The Case of the Mysterious Access Denied aka More on Service Hardening
    http://blogs.technet.com/b/askperf/archive/2010/07/08/the-case-of-the-mysterious-access-denied-aka-more-on-service-hardening.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

    Hi Everyone,
    I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
    "Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
    http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
    Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
    Awaiting your response.
    Farid

    Hi ,
    LMS 3.2 is not supported on Windows 2008 Server Standard R2.
    here is the supported platoform for LMS 3.2
    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
    Thanks,
    Gaganjeet

  • Windows 2008 Licensing - Standard and Enterprise Edt - No of License required

    Hello All  , 
    We have a Windows Environment running on VMware (ESXi5.1), running Windows 2008 Standard and Enterprise platforms . We are working on the no of license that is required  for each category . Can you help us in licencing calculation for each environment
    .Below is the split 
    Windows 2008 R2 Standard Edt.
    ESX Cluster 1 
    Total No of ESX Hosts :4 
    Total No of Windows 2008 R2 Std Edt VMs : 9   // How many license req ? Calculation 
    Total No of Windows 2008 R2 Ent Edt VMs : 6    // How many license req ? Calculation 
    ESX Cluster 2 
    Total no of ESX Hosts : 3 
    Total No of Windows 2008 R2 Std Edt VMs : 13  // How many license req ? Calculation 
    Total No of Windows 2008 R2 Ent Edt VMs : 6   // How many license req ? Calculation 
    Appreciate your support 

    Hi Sathish,
    I would recommend you to contact the Microsoft Volume Licensing Service Center at the following
    Microsoft website. They are the experts and can guide you with the proper license requirments.
    https://www.microsoft.com/licensing/servicecenter/
    Find your local Volume Licensing Service Center support contact information below. Select your country from the drop-down list and the correct Support Center will
    be displayed at right.
    https://www.microsoft.com/licensing/servicecenter/Help/Contact.aspx
    Regards,
    Rafic
    If you found this post helpful, please give it a "Helpful" vote.
    If it answered your question, remember to mark it as an "Answer".
    This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

  • Windows 2008 R2 Standard Remote Desktop Users cannot Connect

    I have a windows 2008 R2 Standard Terminal Server and some users aren't able to connect even though they are in groups that are in Remote Desktop Users on the local computer.  I checked the local security policy setting "Allow log on through Remote
    Desktop Services" and I see that Remote Desktop Users is a member of this group.  Inside of Remote Desktop Users we have DOMAIN\Domain Users and DOMAIN\Terminal Users.  Most of our users are in both groups, but there are still some people that
    aren't able to connect via Remote Desktop to this computer.  There are no users in "Deny logon through Terminal Services."
    Thanks!

    Hi,
    Thank you for posting in Windows Server Forum.
    Is it happens to all users or any particular group of users?
    Please check by creating new user add them to “Remote Desktop Users” group and then see whether that test user can remote desktop to the server.
    It also might happens that you may be limited in number of users or some connection issue or may be firewall setting issue. Please go through beneath article for information.
    Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
    http://support.microsoft.com/kb/2477176
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Windows 2008 R2 Standard 32 bit

    Hello
    We need Windows 2008 R2 Standard 32 bit.
    So please convert Windows 2008 R2 Standard 64 bit to Windows 2008 R2 Standard 32 bit.
    Regards
    Sunil Bagle

    hi
    You cannot convert a x64 bit OS to a 32 bit version, you will need to contact a reseller in your area to assist you with the media if you have a license.
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • SAP on Windows 2008 R2 Standard to Enterprise Edition

    Hello!
    We are using SAP NetWeaver System running on Windows 2008 R2 Standard Edition (VM Ware).
    We are planning to extend RAM size of this server up to 50GB.
    Is there any possibilites for an Inplace Upgrade from Standard to Enterprise Edition?
    Thank you!

    Actually, it is possible.  I haven't done it myself, but there is a tool, DISM (Deployment Image Servicing and Management tool), that supposedly supports in-place edition upgrades, i.e. exactly what you're describing.  It's talked about in Microsoft Technet at Upgrading Windows Server 2008 R2 without media - Server Core - Site Home - TechNet Blogs.  It's about the same thing as a "Windows Anytime Upgrade" that you see available in Windows 7 or 8, so no reinstall is necessary.
    If I recall correctly this wasn't possible in earlier versions of Windows Server, and that's probably what Reagan is remembering.
    Let us know how it goes!
    Best regards,
    Matt

  • LMS 4.0 eval on 180-day Windows 2008 Server Standard R2 SP1 eval

    I'm having difficulties installing the LMS 4.0 eval on an 64-bit 180-day Windows 2008 Server Standard R2 SP1 eval.
    The installer says that it needs 2008 Server Enterprise, but the LMS 4 release notes say 2008 Server Standard works.  It also says that R1 is supported, but makes no specific reference to R2.  I'm assuming that if R1 is supported, R2 would be supported as well, no?

    You need to install a patch for this OS support:
    http://www.cisco.com/cisco/software/cart.html?imageGuId=DB56D2FEE377F4846A9F42F81C48EAC18C2C9967&i=rs
    CiscoWorks_LMS_4.0.x_WIN2K8_R2.exe
    Make sure you follow the install instructions in the readme

  • Issue in Upgrading Windows 2008 R2 Standard server to Windows 2012 Standard Srever

    Hi 
    We have a Windows Server 2008 R2 stadard running... (came with the server).
    To use 64GB, we have just purchased a licence key (retail) and downloaded ISO (Evaluation version) to upgrade. 
    Then I got this error message saying that 
    "Windows Server 2008 R2 Standard cannot be upgraded to Windows Server 2012 Standard Evaluation (Server with a GUI). You can choose to install a new copy of Windows Server 2012 Standard Evaluation (Server with a GUI) instead, but this is different from
    an upgrade, and does not keep your files, settings, and programs."
    Well, fresh installation is not an option for me. no way.. 
    I read somewhere that it is because I am trying to upgrade from licenced 2008 R2 standard to evaluation 2012 standard. Then I saw a screenshot where you supply a licence key after selecting an edition to choose.. 
    I don't get that screen sinceit is the evaluation version. 
    Well, I am supposed to upgrade the system before the end of the new year...  now I am in a panic.. - - ;;
    Can anyone help me with this please??? 

    Hi,
    Thank you for posting in Windows Server Forum.
    Agree with words of “Dave & Tim” and based on my research, we need to perform a clean installation of Windows Server 2012 Evaluation Versions instead upgrading.
    However, if we have licensed Windows Server 2012, we can upgrade to Windows Server 2012 by referring to the Upgrading previous retail versions of Windows Server to Windows Server 2012 part of
    Evaluation Versions and Upgrade Options for Windows Server 2012.
    Hope it helps!
    Regards.

  • After OS upgrade to windows 2008 R2 x64 Dispatcher stopped by error

    Hello everyone,
    I am facing a problem after OS upgrade (from Windows Server 2003 Standard R2 x64 to Windows Server 2008 Standard  R2 x64), Solution Manager 7.0 EhP1 on DB2 v9.7 FP4.
    When I start SAP using mmc console after awhile Dispatcher stops.
    When I wrote R3trans -dx in CMD:
    D:\usr\sap\ASM\DVEBMGS00\exe>r3trans -dx
    This is r3trans version 6.14 (release 701 - 19.01.11 - 11:44:00).
    unicode enabled version
    r3trans finished (0000).
    The contents of  [dev_w0|http://pokazywarka.pl/p9udr9/], [std_dispatcher.out|http://pokazywarka.pl/wgpsfx/] and[ std_server0.out|http://pokazywarka.pl/a5xsp0/]
    I found an error in dev_w0:
    [IBM][CLI Driver] SQL1531N  The database alias "ASM" could not be found in the db2ds
    C  &+     driver.cfg configuration
    And the Note: 1564507 - DB6: SQL1531N alias "<DBNAME>" not found in db2dsdriver.cfg
    Contents of db2cl.ini:
    ; Comment lines start with a semi-colon.
    [ASM]
    Database=ASM
    Protocol=tcpip
    Hostname=sapsolman
    Servicename=5912
    [COMMON]
    Diagpath=
    sapsolman\sapmnt\ASM\SYS\global\db6\db2dump
    Someone have any ideas how to fix Dispatcher ? I can attach any log files, if necessary.
    Best regards,
    Kamil

    Hi,
    Well unfortunately, do not think its possible to fix it. We once had a similar situation with SAP system on MSSQL on Windows Server 2008. It was only an ABAP system so after a lot of hit and trial we got the system up. And would not get any support from SAP incase of future errors.
    But for Solution manager this really would be complex because of the Java part. Do you have the backup before OS upgrade?
    Would recommend a restore and migration as supported by SAP.
    Regards,
    Srikishan

  • Tdx.sys ntkrnlmp.exe BSOD after P2V Windows 2008 R2 Standard

    Hi all,
    We ran a P2V against a Server 2008 R2 Standard (SBS) DC on the weekend. Given that VMware hasn't released a cold clone ISO for a while, we used ShadowProtect Recovery Environment and Hardware Independent Restore. It worked a treat, stripped the old physical
    NICs out.
    Monday morning it threw a BSOD, then again at 10 am that day.
    We immediately patched to remove the http.sys BSOD vulnerability to be safe.
    We also patched 2008 R2 to SP1 x64 latest versions.
    It crashed again last night, then again at 10 am today and every day since.
    The BSOD dumps mention ntkrnlmp.exe and tdx.sys
    vSphere is a new Intel server S2600CP2 running vSphere 5.5 Update 2.
    The VM is running a VMXnet3 NIC, we've had issues before. RAID controller is Intel RMS25PB040.
    The server runs AD/DNS, Exchange, File Shares and Printers.
    We're combing through tasks, as it may be falling over at the same time every couple of days.
    We've disabled Kaspersky Endpoint protection.
    We will be planning to swap over the VMXnet3 NIC to E1000 later today, once we have a full backup that runs to USB.
    After extensive researching we are leaning towards the NIC/network being a problem under load causing the BSOD.
    Anyone else have any other suggestions we can try to resolve the BSOD issues?
    Screenshot of the BSOD error codes: http://imgur.com/xRwZcKf
    Here is an output of the minidump file:
    Debugging Details:
    TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
    BUGCHECK_STR:  0x7f_8
    CUSTOMER_CRASH_COUNT:  1
    DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT_SERVER
    PROCESS_NAME:  System
    CURRENT_IRQL:  2
    LAST_CONTROL_TRANSFER:  from fffff80001e911a9 to fffff80001e91c00
    STACK_TEXT:
    fffff80001d22d28 fffff80001e911a9 : 000000000000007f 0000000000000008 0000000080050031 00000000000406f8 : nt!KeBugCheckEx fffff80001d22d30 fffff80001e8f672 : 0000000000000000 0000000000000000
    0000000000000000 0000000000000000 : nt!KiBugCheckDispatch+0x69 fffff80001d22e70 fffff88003413a0c : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : nt!KiDoubleFaultAbort+0xb2
    fffff88002b02f90 0000000000000000 : 0000000000000000 0000000000000000 0000000000000000 0000000000000000 : tdx!TdxIssueQueryAddressRequest+0x5c
    STACK_COMMAND:  kb
    FOLLOWUP_IP:  tdx!TdxIssueQueryAddressRequest+5c fffff88003413a0c ff1576370100    call    qword ptr [tdx!_imp_ExAllocatePoolWithTag (fffff88003427188)]
    SYMBOL_STACK_INDEX:  3
    SYMBOL_NAME:  tdx!TdxIssueQueryAddressRequest+5c
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: tdx
    IMAGE_NAME:  tdx.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  4ce79332
    FAILURE_BUCKET_ID:  X64_0x7f_8_tdx!TdxIssueQueryAddressRequest+5c
    BUCKET_ID:  X64_0x7f_8_tdx!TdxIssueQueryAddressRequest+5c
    Followup: MachineOwner

    Hi Sir,
    >>We ran a P2V against a Server 2008 R2 Standard (SBS) DC on the weekend. Given that VMware hasn't released a cold clone ISO for a while
    It seems that you have performed WMware P2V , it is beyond what we can support . You may need to post this issue into WMware forum :
    https://communities.vmware.com/welcome
    In windows hyper-v , there is a tool " disk2VHD" can help us to perform P2V :
    https://technet.microsoft.com/en-us/library/ee656415.aspx?f=255&MSPPError=-2147217396
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Upgrade Windows 2008 R2 Standard to 2008 R2 Enterprise fails

    Hi,
    I am trying to perform an in place upgrade from Windows Server 2008 R2 Standard to Enterprise. I want to setup some things with failover clustering. The install goes all the way to the last step where it is transferring files and then it hangs. This server
    is in my home and I don't have a plethora of servers to play with so I need to upgrade. This server is an HP ProLiant ML330 G6. My other server is a DL385G2 running 2008 R2 Enterprise. They are different because I was scouring eBay and pounced when a deal
    came up. :-)
    This server is a DC and it is running:
    DHCP
    DNS
    Exchange 2010
    MS Forefront Security
    Print Server
    DFS Namespace
    DFSR (I have a second server that it replicates with)
    All HP services (But I disable them for the upgrade)
    I suspect that it is failing on a print driver but I am not sure. I disabled all non-MS services from boot. I also added the system environment variable with the iphlp dll. (can't recall it right at this moment)
    The way I have been doing this is to power off the server, break the RAID 1 O/S mirror by removing 1 of the drives, power up and run the upgrade. If it fails, I power off, insert the drive I removed and pop out the "upgraded" drive. Boot up, pop
    in the failed upgrade drive and let it rebuild.
    Any thoughts? The last time it failed I let it back out the upgrade and I copied off a bunch of the setup log files before I restored the previous mirrored drive.
    I am also contemplating upgrading this server to 2012 R2. Would using my RAID 1 method above work? I don't know if the upgrade will change something with the server's computer account therefore not allowing me to revert to 2008 R2.
    Lastly, I know that I shouldn't have all of these services on one server, but this is in my home and not a work environment. It runs fairly flawlessly. 

    Hi,
    In addition to Dave Patrick, what is the error message when you upgrade failed?
    Meanwhile, please check this article:
    http://blogs.technet.com/b/server_core/archive/2009/10/14/upgrading-windows-server-2008-r2-without-media.aspx
    It seems like the server can't be a DC at the time of upgrade.  If you demote a DC using dcpromo, you can upgrade, then re-promote it.
    Regards.
    If you have any feedback on our support, please click
    here
    Vivian Wang

Maybe you are looking for