Windows 2008 R2 state backup fails with various errors

Since a few years we are using DPM to backup our servers but since some time the system state of the server where DPM is installed started to fail.
I was trying to do system state backup using command line windows backup:
wbadmin start systemstatebackup -backupTarget:C:
and it fails every time with different error (last 5 tries):
1. Error in backup of C:\Windows\winsxs\Manifests\x86_microsoft-windows-w..pdateclient-activex_31bf3856ad364e35_7.6.7600.256_none_09f272fb52ab0c3f.manifest during read: Error [0x80070002] The system cannot find the file specified.
2. Error in backup of C:\Windows\System32\msmpeg2vdec.dll during write: Error [0x80070002] The system cannot find the file specified.
3. Error in backup of C:\Windows\System32\catroot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\Microsoft-Windows-WinMan-WinIP-Package-TopLevel~31bf3856ad364e35~amd64~~7.1.7601.16398.cat during read: Error [0x80070015] The device is not ready.
4. Error in backup of C:\ during read: Error [0x80070005] Access is denied.
5. Error in backup of C:\Windows\System32\ActionCenter.dll during write: Error [0x80070002] The system cannot find the file specified.
That's a Windows 2008 R2 server with DPM and OM servers installed.
The system state backup was doing fine for 2 or 3 years and suddenly it just stopped.:/

Hi,
It seems that we cannot use a volume that is included in the backup as a storage location, please backup to another volume to see the result. 
You could refer to the article below to troubleshoot the issue:
Reasons why the error Enumeration of the files failed may occur during System State backup
http://blogs.technet.com/b/askcore/archive/2010/06/18/reasons-why-the-error-enumeration-of-the-files-failed-may-occur-during-system-state-backup.aspx
In additional, as the server with DPM installed, I suggest you also ask for help from DPM forums:
http://social.technet.microsoft.com/Forums/en-US/home?forum=dataprotectionmanager&filter=alltypes&sort=lastpostdesc
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Windows 2008 R2 Sp1 backup failing with Event Id 517 and Error Code: 2147942487

    We have a windows share that we dump multiple windows backup images from our servers.   We have 1 server consistently failing when performing a manual "Backup Once...." operation.  
    The error message in the Windows Backup gui is: "Failed The parameter is incorrect"  
    The event log shows an error of 517 with the message: "
    The backup operation that started at '‎2015‎-‎01‎-‎12T14:25:20.681861800Z' has failed with following error code '2147942487' (One or more arguments are invalid). Please review the event details for a solution, and then rerun the backup operation once the
    issue is resolved.
    The strange part is when we choose a different location to accept the backup we have success.  The backup starts, but fails between 1-6 GB transferred. 
    Any assistance would be appreciated.

    Hi,
    Do you mean that if you change the backup location, the backup could be started - but still fail after backing up 1 - 6 GB data?
    One of the possible cause is an incorrect partition table entry and NTFS total sectors.
    Please test to shrink the volume you are going to backup for several MB. 
    Right click volume >>Select shrink, shrink several MB (such as 3MB).
    Then extend the volume back to original size. You can right click on volume and select Extend volume.
    When it finished, see if issue still exists.  
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Windows 2008 r2 SP1 installation failed with unspecified error 0x80004005 - E_FAIL

    Hi Team,
    We have SQL data base server with Win 2008 r2 OS.When trying install Sp1 it fails after reboot with unspecified error -0x80004005 - E_FAIL.
    Server having snap drive connected with 6 SQL data bases. Sp1 installation running 7 hrs and falling after couple of reboot.
    Any help appreciated.CBS log attached.
    ================================ 2015-01-24 18:48:22, Info CBS Starting TrustedInstaller initialization. 2015-01-24 18:48:22, Info CBS Loaded Servicing Stack v6.1.7601.17514 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17514_none_678566b7ddea04a5\cbscore.dll
    2015-01-24 18:48:23, Info CSI 00000001@2015/1/24:18:48:23.137 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee8d4e94d @0x7fee9079839 @0x7fee90434d3 @0xff03e94c @0xff03d769 @0xff03daff) 2015-01-24 18:48:23, Info CBS Could not load SrClient DLL
    from path: SrClient.dll. Continuing without system restore points. 2015-01-24 18:48:23, Info CSI 00000002@2015/1/24:18:48:23.139 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee8d4e94d @0x7fee90c6806 @0x7fee9092a9c @0x7fee90435a9 @0xff03e94c @0xff03d769)
    2015-01-24 18:48:23, Info CSI 00000003@2015/1/24:18:48:23.139 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7fee8d4e94d @0x7fee9988728 @0x7fee9988856 @0xff03e444 @0xff03d7ae @0xff03daff) 2015-01-24 18:48:23, Info CBS Ending TrustedInstaller initialization.
    2015-01-24 18:48:23, Info CBS Starting the TrustedInstaller main loop. 2015-01-24 18:48:23, Info CBS TrustedInstaller service starts successfully. 2015-01-24 18:48:23, Info CBS SQM: Initializing online with Windows opt-in: False 2015-01-24 18:48:23, Info CBS
    SQM: Cleaning up report files older than 10 days. 2015-01-24 18:48:23, Info CBS SQM: Requesting upload of all unsent reports. 2015-01-24 18:48:23, Info CBS SQM: Failed to start upload with file pattern: C:\Windows\servicing\sqm\*_std.sqm, flags: 0x2 [HRESULT
    = 0x80004005 - E_FAIL] 2015-01-24 18:48:23, Info CBS SQM: Failed to start standard sample upload. [HRESULT = 0x80004005 - E_FAIL] 2015-01-24 18:48:23, Info CBS SQM: Queued 0 file(s) for upload with pattern: C:\Windows\servicing\sqm\*_all.sqm, flags: 0x6 2015-01-24
    18:48:23, Info CBS SQM: Warning: Failed to upload all unsent reports. [HRESULT = 0x80004005 - E_FAIL] 2015-01-24 18:48:23, Info CBS No startup processing required, TrustedInstaller service was not set as autostart, or else a reboot is still pending. 2015-01-24
    18:48:23, Info CBS NonStart: Checking to ensure startup processing was not required. 2015-01-24 18:48:23, Info CSI 00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDisposition = @0x136f6c0
    2015-01-24 18:48:23, Info CSI 00000005 Creating NT transaction (seq 1), objectname [6]"(null)" 2015-01-24 18:48:23, Info CSI 00000006 Created NT transaction (seq 1) result 0x00000000, handle @0x23c 2015-01-24 18:48:23, Info CSI 00000007@2015/1/24:18:48:23.144
    CSI perf trace: CSIPERF:TXCOMMIT;1211 2015-01-24 18:48:23, Info CBS NonStart: Success, startup processing not required as expected. 2015-01-24 18:48:23, Info CBS Startup processing thread terminated normally 2015-01-24 18:48:23, Info CSI 00000008 CSI Store
    3877440 (0x00000000003b2a40) initialized 2015-01-24 18:48:23, Info CBS Session: 30423046_1416810351 initialized by client RMT. 2015-01-24 18:48:24, Info CSI 00000009@2015/1/24:18:48:24.057 CSI Transaction @0x1761b90 initialized for deployment engine {d16d444c-56d8-11d5-882d-0080c847b195}
    with flags 00000002 and client id [26]"TI5.30423046_1416810351:1/" 2015-01-24 18:48:24, Info CSI 0000000a@2015/1/24:18:48:24.059 CSI Transaction @0x1761b90 destroyed 2015-01-24 18:48:24, Info CBS Appl: DetectUpdate, Package: Microsoft-Windows-SecureStartup-OC-Package~31bf3856ad364e35~amd64~~6.1.7600.16385,
    Remote Parent: DirectoryServices-DomainController-Tools, Intended State: Staged 2015-01-24 18:48:24, Info CBS Appl: DetectUpdate, Package: Microsoft-Windows-SecureStartup-OC-Package~31bf3856ad364e35~amd64~~6.1.7600.16385, Remote Parent: DirectoryServices-DomainController-Tools,
    Intended State: Staged 2015-01-24 18:48:24, Info CBS Appl: Evaluating applicability block(detectUpdate part), disposition is: Staged, applicability: NotApplicable, result applicability state: Staged 2015-01-24 18:48:24, Info CBS Appl: Package: Microsoft-Windows-SecureStartup-OC-Package~31bf3856ad364e35~amd64~~6.1.7600.16385,
    Update: BdeAducExtTool, Applicable: NeedsParent, Dis 2015-01-24 18:48:24, Info CBS Appl: DetectUpdate, Package: Microsoft-Windows-WMI-SNMP-Provider-Package~31bf3856ad364e35~amd64~~6.1.7600.16385, Remote Parent: SNMP, Intended State: Installed 2015-01-24 18:48:24,
    Info CBS Appl: Evaluating applicability block(detectUpdate part), disposition is: Staged, applicability: Applicable, result applicability state: Installed 2015-01-24 18:48:24, Info CBS Appl: Package: Microsoft-Windows-WMI-SNMP-Provider-Package~31bf3856ad364e35~amd64~~6.1.7600.16385,
    Update: WMISnmpProvider, Applicable: Applicable, Dis 2015-01-24 18:48:24, Info CBS Appl: DetectUpdate, Package: Microsoft-Windows-IIS-WebServer-Package~31bf3856ad364e35~amd64~~6.1.7600.16385, Local Parent: IIS-WebServerRole, Intended State: Staged 2015-01-24
    18:48:24, Info CBS Appl: Evaluating applicability block(detectUpdate part), disposition is: Staged, applicability: NotApplicable, result applicability state: Staged 2015-01-24 18:48:24, Info CBS Appl: Package: Microsoft-Windows-IIS-W

    Appreciate your suggestion Dave,
    Any idea what could be cause of this failure.?Do you see anything from the CBS logs.
    This server attached with SNAP drive luns,is there something or SQL application preventing this installation ?
    After reboot it revert the installation...it shows "Failure config service pack..reverting changes,do not not turn off your computer".
    Surprisingly it happens both of our SQL data base server.
    Do you think Increasing MaxNumFilters to
    14 shall work ?
    =====================
    =================================CheckSUR.Log==========
    Checking System Update Readiness.
    Binary Version 6.1.7601.22471
    Package Version 26.0
    2015-02-01 09:37
    Checking Windows Servicing Packages
    Checking Package Manifests and Catalogs
    Checking Package Watchlist
    Checking Component Watchlist
    Checking Packages
    Checking Component Store
    Summary:
    Seconds executed: 555
     No errors detected

  • Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

    The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares. 
    When the Volume Shadow Copy service was running under the context of System, this was the error logged:
    “failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
    Which is likely due to not having permissions to write to the network location. 
     This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
      Then the error changed to this:
    “failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
    HRESULT 0x8078006b
    DetailedHRESULT 0x8004230f
    ErrorMessage %%2155348075
    BackupState 12
    VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
    BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
    TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
    DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
    FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
    /></VolumeInfo>
    We aren’t really seeing anything that gives any hint on what the issue is. 
    Any ideas?  Thanks in advance!

    We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free. 
    We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there). 
      If we try another network location, we receive the exact same error. 
     This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
    Thank you for the link. 
    Looking in: 
    Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
    But it doesn’t seem to give any more details: 
    Log Name:     
    Microsoft-Windows-Backup
    Source:       
    Microsoft-Windows-Backup
    Date:         
    7/8/2013 8:00:12 PM
    Event ID:     
    5
    Task Category: None
    Level:        
    Error
    Keywords:     
    User:         
    SYSTEM
    Computer:     
    servername.edu
    Description:
    The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
    Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
    <Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
    <EventID>5</EventID>
    <Version>3</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
    <EventRecordID>30</EventRecordID>
    <Correlation />
    <Execution ProcessID="3028" ThreadID="3996" />
    <Channel>Microsoft-Windows-Backup</Channel>
    <Computer>servername.edu</Computer>
    <Security UserID="S-1-5-18" />
      </System>
      <EventData>
    <Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
    <Data Name="HRESULT">0x8078006b</Data>
    <Data Name="DetailedHRESULT">0x8004230f</Data>
    <Data Name="ErrorMessage">%%2155348075</Data>
    <Data Name="BackupState">12</Data>
    <Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
    <Data Name="BackupTarget">\\servername\BACKUP</Data>
    <Data Name="NumOfVolumes">2</Data>
    <Data Name="VolumesInfo">&lt;VolumeInfo&gt;&lt;VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
    IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /&gt;&lt;VolumeInfoItem
    Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
    NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /&gt;&lt;/VolumeInfo&gt;</Data>
    <Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
    <Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="PrepareBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PrepareBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupWriteStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupWriteEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="DVDFormatStartTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="DVDFormatEndTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="MediaVerifyStartTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="MediaVerifyEndTime">&lt;TimesList&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupPreviousState">2</Data>
    <Data Name="ComponentStatus">&lt;ComponentStatus&gt;&lt;/ComponentStatus&gt;</Data>
    <Data Name="ComponentInfo">&lt;ComponentInfo&gt;&lt;/ComponentInfo&gt;</Data>
    <Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
    <Data Name="SystemStateBackup">&lt;SystemState IsPresent="0" HResult="0" DetailedHResult="0" /&gt;</Data>
    <Data Name="BMR">&lt;BMR IsPresent="0" HResult="0" DetailedHResult="0" /&gt;</Data>
    <Data Name="VssFullBackup">false</Data>
    <Data Name="UserInputBMR">false</Data>
    <Data Name="UserInputSSB">false</Data>
    <Data Name="BackupSuccessLogPath">
    </Data>
    <Data Name="BackupFailureLogPath">
    </Data>
    <Data Name="EnumerateBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="EnumerateBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PruneBackupStartTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="PruneBackupEndTime">&lt;TimesList&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;Time Time="1601-01-01T00:00:00.000Z" /&gt;&lt;/TimesList&gt;</Data>
    <Data Name="BackupFlags">0x9</Data>
    <Data Name="ComponentInfoSummary">&lt;ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /&gt;</Data>
      </EventData>
    </Event>

  • Windows 2012 System State Backup Fails

    We have a Windows 2012 Domain Controller VM that we would like to backup the System State using DPM. Agent has been installed and the Windows Backup has been added.
    When the backup runs in DPM, the job fails. Here is the error code:
    DPM cannot create a backup because Windows Server Backup (WSB) on the protected computer encountered an error (WSB Event ID: 517, WSB Error Code:  0x12363C0). (ID 30229 Details: Internal error code: 0x80990ED0)
    When we try and create the backup using Windows Backup, the following error is in the log file:
    following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
    We have tried attaching a separate drive and backup to a shared location. Both fail.
    We have tried backup of just a few files on the DC instead of the System State, this fails as well.
    All VSS Writers show as Stable with no errors
    Server has the latest updates
    Server has been rebooted, same issue
    VM is Windows 2012 on a Windows 2008 R2 clustered host and is using Dynamic Disks (not fixed disks).
    Anyone have any thoughts on what could be going on?

    Hi,
    If any of the following are true, you will not be able to backup a system state to that volume.
    • Make sure that the target volume has no shadow copy before the backup starts.  
    • If a system state backup is stored on a source volume, backup settings should be configured for full backups. By default, settings are configured for full backups.  
    • Periodically check that no other user or program maintains a shadow copy on the target volume.  
    • Do not keep volume level backups and system state backups in the same location.  
    • The volume used to store the system state backup needs twice the amount of free space as the size of the system state backup until the backup completes
    Meanwhile please check if it is caused that you are backing up to a critical drive. Try modify the following key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wbengine\SystemStateBackup\ 
    Set the value of this entry as follows: 
    Name: AllowSSBToAnyVolume 
    Data type: DWORD 
    Value data: 1 
    If you have any feedback on our support, please send to [email protected]

  • Backup fail with VSSwriter error

    Hello,
    we currently are using Symantec Backup on tape and Windows Server Backup to make two differents backups on a SBS 2008.
    We are getting failed backup randomly during the week for both. Sometimes one is succeed and not the others.
    We have found several post about the VSS issues and how to fix it but nothing has changed.
    What we have done:
    - check the VSS writer and all is in "no error" state
    - check the settings of the backups
    - restart the VSS services
    - Configure the Shadow Copy on the drives
    - reboot the server
    - Tried several solutions from forums
    What we can see in the event viewer
    ID 12289
    "Volume Shadow Copy Service error: Unexpected error VSS_E_WRITER_STATUS_NOT_AVAILABLE. An older active writer session state is being overwritten by a newer session. The most common cause is that the number of parallel backups has exceeded the maximum
    supported limit.  hr = 0x80042409. 
    Operation:
       Aborting Writer
    ID 7001
    VssAdmin: Unable to create a shadow copy: The shadow copy provider had an error. Please see the system and application event logs for more information. 
    Command-line: 'C:\Windows\system32\vssadmin.exe Create Shadow /AutoRetry=15 /For=C:\'. "
    ID 12341
    Volume Shadow Copy Warning: VSS spent 75 seconds trying to flush and hold the volume \\?\Volume{c22d5d46-0540-11e0-9496-806e6f6e6963}\.  This might cause problems when other volumes in the shadow-copy set timeout waiting for the release-writes phase,
    and it can cause  the shadow-copy creation to fail.  Trying again when disk activity is lower may solve this problem. 
    Operation:
       Executing Asynchronous Operation
    Context:
       Current State: flush-and-hold writes
       Volume Name: \\?\Volume{c22d5d46-0540-11e0-9496-806e6f6e6963}\"
    Some will post the link of "how to troubleshoot VSSwriter issue": we have already used it.
    Does someone have a fresh idea about this issue ?
    Thanks in advance

    Hi Nerea,
    Before going further, would you please let me confirm if temporarily disable either of the two backup, will
    another backup operation run smoothly? In other words, if temporarily disable Symantec Backup, will Windows Server Backup always run successfully? Or if disable Windows Server Backup, will Symantec Backup always run successfully? Please check if Windows Server
    Backup conflicts with Symantec Backup.
    Based on the error message, please run
    chkdsk command and check if there is any issue in the disk. Then use
    Vssadmin resize shadowstorage to resizes the maximum amount of storage space that can be used for shadow copy storage. And check if this issue still persists.
    In addition, would you please let me know whether re-register Volume VSS components? If this issue still persists,
    please re-register and monitor the result.
    From command prompt:
    cd windows\system32
    Net stop vss
    Net stop swprv
    regsvr32 ole32.dll
    regsvr32 vss_ps.dll
    Vssvc /Register
    regsvr32 /i swprv.dll
    regsvr32 /i eventcls.dll
    regsvr32 es.dll
    regsvr32 stdprov.dll
    regsvr32 vssui.dll
    regsvr32 msxml.dll
    regsvr32 msxml3.dll
    regsvr32 msxml4.dll
    net start swprv
    net start vss
    By the way, did the Symantec Backup and Windows Server Backup run at the same time? Or before one backup finished,
    had another backup started?
    Hope this helps.
    Best regards,
    Justin Gu

  • Bare metal restore of full server backup fails with RPC error 0x800706BA (server 2012)

    With Windows Server 2012, after creating a successful windows server backup (full server), I am unable to do a bare metal restore of the system.
    EFI System Partition, C:, D: are the volumes on a single array (Raid 5).
    Loading WinRE and launching re-image, the full server restore stops after completing the C: restore just after beginning the D: drive restore (data volume) with the error with the message about RPC error 0x800706BA, unavailable.
    The system will not boot as a result of the failure. 
    What may be causing this?
    [edit]
    I think I have two things working against me here... one, Volume Shadow Copy service wasn't running in WinPE and two.. the D: volume contains data deduplication.
    I think this is causing some of my problems.
    Is there an additional service that I need to start in WinPE to get a volume that was deduplicated restored perhaps using wbadmin?

    Hi,
    Thanks for the reply Shaon.
    The hardware system is identical; however, I am increasing storage capacity from 12TB to 16TB.  Basically, the system is the same, just new hard drives (4x4TB versus 4x3TB).  Drives are all identical enterprise class drives and I am actually using
    the same system (backup, swap drives then restore).
    I tried both using the WinRE restore (re-image) with the backup set, and tried using wbadmin.  Both produce same RPC unavailable messages (although using the GUI based tool via WinRE provides the additional error code #).
    I do not have any idea what to look at to try to figure this one out.
    [edit]
    I was just informed of this posting:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/147efccc-e0e9-4458-852e-c3a44ae5cb64/the-system-image-restore-failed-error-details-he-rpc-server-is-unavailable-0x800706ba?forum=windowsbackup
    and in my case, this lab server does in fact act also as a DC as well as a file server...  do I need to spin up a secondary controller (perhaps in a VM on another machine) to do this restore?

  • CRS 5 Backups fail with this error: Unknown error occured while connecting to the host

    Dear All,
    We have backup issue with  UCCX 5.0(2)SR03_Build317, while trying to take  backup giving following error "Unknown error occurred while connecting to the host".
    I have found the solution in the Cisco and tried all the suggestion, still not working and same error observed. Due to backup issue we unable to do any changes on the CRS, when we try to create new agents, those agents are not reflecting in the CRS.
    Also I have observed bellow error , when try to re-sync the JTAPI,
    Error while handling the input   request.
    Top of Form
    Config Changes are not allowed during 'Backup' operation, which   was started by 'Scheduler' at 'Fri Jun 08 18:00:03 GMT+08:00 2012 '. Please   try again after 'Backup' is complete.
    Bottom of Form
    http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00809a752c.shtml
    Solution
    Complete these steps in order to resolve this issue:
    •1.      Access the UCCX server and navigate to Start > Run, and type CET.
    •2.      When the warning message appears, click NO.
    •3.      Choose com.cisco.crs.cluster.config.ArchiveAdminConfig.
    •4.      On the right side, double-click the record ID.
    •5.      Click the com.cisco.crs.cluster.config.ArchiveAdminConfig tab, and clear the password under Backup Storage.
    •6.      Click Apply.
    •7.      Navigate to Appadmin > Tools > Backup and Restore.
    •8.      Under Backup Storage Location, type the new password, and click Update.
    After you complete these steps, you can run the backup. If the backup fails, restart the server, and try the backup again. If the backup still fails, you can navigate to CET, clear all the fields, and then type the new information for the storage location.
    Please help me with your suggestions.
    Thanks & Regards,
    Naveen .S

    Please any one help me on this issue..

  • Time Machine backups fail with no error message

    My Time Machine hasn't successfully completed a backup since 3/19. It starts the backup on schedule, indexes over 2 million objects, goes through the phase of preparing objects, and then just stops. I know that there have been many changes since that time, but it isn't backing them up. Please tell me how to fix this.

    I have the same problem - Time Machine fails to backup with no error message - after a brief foray into Mavericks. Each time it tries to backup, TM creates a new folder in the "in progress" directory but fails to complete.  Otherwise TM looks normal with no obvious errors. I have several HDDs.  I installed Mavericks on an external drive, migrated my data over to it. Booted from it and after a day or two decided I just didn’t' like it and booted from my Snow Leopard partition.  All was fine but apparently, I had forgotten to turn OFF Time Machine while booted into Mavericks.  Thereafter, Time Machine failed to backup.  Here's what I've done and the error logs:
    Deleted the NEW directory that Mavericks created on TM
    Done a full reset of TM (deleted: /Library/Preferences/com.apple.TimeMachine.plist
    Re-entered the exclusions
    Rebuilt the directory structure on the boot disc using DiskWarrior
    Repaired the TM disc using Disc Utility
    Resynced the Spotlight cache on the boot disk
    TM also seems not to do a deep traversal since it just stops after checking files to backup.
    Here are the error logs from the TM Buddy widget:
    Starting standard backup
    Error loading /Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/MacOS/Vir tualPCDiskImagePlugin:  dlopen(/Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/Ma cOS/VirtualPCDiskImagePlugin, 262): no suitable image found.  Did find:\n /Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/MacOS/Vir tualPCDiskImagePlugin: mach-o, but wrong architecture
    Cannot find function pointer MacDiskImagePluginFactory for factory 7F1FD83E-6684-11D8-968F-000A957703C0 in CFBundle/CFPlugIn 0x102f00930 </Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle> (bundle, not loaded)
    Backing up to: /Volumes/Time Machine/Backups.backupdb
    Event store UUIDs don't match for volume: Mac Pro Data
    Forcing deep traversal on source: "Mac Pro Data" (mount: '/Volumes/Mac Pro Data' fsUUID: B4BEA50F-15B1-34BB-92F1-B7605139B852 eventDBUUID: BA019CB5-8123-4C99-9806-C9593D4EFA34), {1, 1, 1, 0}
    Event store UUIDs don't match for volume: Music HDD
    Forcing deep traversal on source: "Music HDD" (mount: '/Volumes/Music HDD' fsUUID: FF1EF8F5-30D0-34C0-BC02-ACDB5AD18B3A eventDBUUID: 92A95F63-5F4A-4987-90DB-5444ADF33D40), {1, 1, 1, 0}
    Node requires deep traversal:/ reason:must scan subdirs|
    Error: Flushing index to disk returned an error: 0
    Backup canceled.
    I don't know what to do next.  Any ideas?
    Thanks,
    John

  • My Time machine backup fails with an error message

    Time machine used to work just fine when I first upgraded to Leopard but now every time it tries to backup I get an Error message "Unable to complete backup. An error occurred while copying files to the backup volume." This occurs while Time Machine is "Preparing". Next hour it starts all over again and does the same thing. I have reformatted the backup drive but still get the error. I'm backing up to a 300g Firewire drive and have used about 207G for the backups.backupdb folder.
    An ideas how to resolve this issue?

    Here is a list of some TM articles that may help. You can look for more by searching Mac Help from the Finder's Help menu or searching the Knowledge Base from Apple's Support Page.
    Time Machine Troubleshooting
    Here are several articles to help troubleshoot Time Machine Problems as well as assist in properly setting up Time Machine.
    Mac 101- Using Time Machine in Mac OS X 10.5 Leopard
    Is Time Machine all you need?
    Some advice for those using Time Machine
    TidBITS Macs & Mac OS X- Time Machine- The Good, the Bad, and the Missing Features
    Mac OS X 10.5- Time Machine backups are not visible
    OS X 10.5- Time Machine stops backing up to external disk
    10.5- Disable the 'use this disk?' Time Machine dialog
    Time Machine tips and troubleshooting
    Mac OS X 10.5 Help- Restoring files backed up with Time Machine
    OS X 10.5- Using Time Machine and troubleshooting Time Machine issues

  • Using Windows 7 Backup (with 3.0 TB drive) the backup fails with an error code of (0x8078002A)

    I have tried for over a month to back up my laptop to a new external 3TB drive (DWC130).  I have reformatted it, changed my windows backup settings, and read as much as I could about this issue and still have had no success.  I have reformatted the drive; I have allowed Windows 7 (64-bit) to back up with its own settings; I have read forums all over and there has been no answer provided that solved this issue.  I am hoping someone from Toshiba or this form can provide some direction.

       Error code 0x8100002F and or error code 0x80070002 when you back up files in Windows 7
    -Jerry

  • New iphone, restore backup failed with - An error occurred. How do I fix this?

    Have tried to follow the transfer instructions but it does not seem to work.
    Everytime I choose to restore a backup when I set up / activate the new iphone, it fails after some 10-12 seconds with the message that it could not restore because an error occurred.
    It says nothing else about what the error is and I have to start the set up / activation all over.
    So how so I solve this?
    Other 'answers' says how to transfer, but it does not work for me and the answers I have found does not address this issue.

    Search the error code in the support search and you should find something that will walk you through it, but without an error code it's a little hard to know what you're talking about

  • Upgrade from Windows 8.1 to 10 fails with an error code, at the very end of processing

    I tried to upgrade to Windows 10.  It went through the whole process, and upon reboot at the very end it failed.  It threw this message:  I searched on these terms and couldn't find an answer.  My machine is brand new.  I haven't installed much on it at all, figuring it's better to wait until I've gotten Windows 10 installed. Any ideas?

    So it looked like I was missing a KB update, the 3035584, which enables the upgrade.  I performed some Windows 8.1 updates and got everything set up. I ran the upgrade to Windows 10.  It went all the way through to the reboot, taking about 20~30 mins.  At this point it asks me to confirm installation, and I select "OK" and it goes for another 20 mins.  It proceeds about 10% of the way there, and then it reboots.  The next thing I see on my screen is "Restoring your previous version of Windows". I'm back to Windows 8.1 again.  I log in... and same error message as shown above. Frankly, I can't understand what is causing this... and why Windows can't "figure out" if my machine is good to go for a full installation in just 10 mins or so.  Why go through all of these gyrations for 45 mins only to reject the whole process?

  • BMR-SS backup fails with error "the specified network name is no longer available"

    We are running DPM 2012 SP1 on a Windows Server 2008 R2 system, backing up a Windows Server 2012 system that is a DC.  The agent version is 4.1.3417.0.  Both the DPM server and the DC are physical systems - brand new HP Proliant 360's.
    When creating the replicas for the 2012 server the first time, the backups work fine, and then for a day or so after that.  After a couple of days, the BMR-SS backups fail with the error "the specified network name is no longer available".  
    I can watch the backup happening in the Windows Server Backup console on the protected server - the BMR backup goes up to 99% and then fails.  BMR backups on all the other servers are working - we have a mix of Win2008R2 and Win2012. 
    Here is what I have tried:
    I can connect to the UNC path on the backup server without a problem during and after the backup is happening. 
    Tried reinstalling the DPM agent.
    Tried backing up directly from the protected server to another server's network share, which worked.
    I can copy multiple gigabyte files directly from the protected server to the DPM file share without a problem (the same one that DPM uses for the replica)
    Tried turning off the SCEP real-time protection during the backup.
    Any help would be appreciated - thanks.
    KW

    llo Boudewijn
    I followed Boudewijn's suggestion. 
    The Windows 2012R2 servers had no recovery partition in disk C. I created one (400MB) following http://support.microsoft.com/kb/2930294/en-us and
     DPM system restore worked. But just once. 
    So this is not the solution to the problem......
    Is no one else having issues with DPM bare metal protection of Windows 2012R2 servers? 

  • Backups fail with Insufficient privileges error

    Oracle 9.2.0.5 database
    Solaris Operating Sysstem
    I needed to recreate one database recently from the backup. I used DUPLICATE TARGET DATABASE comamand to recreate database. And once client confirmed I removed old database and copied this new database to original location and recreated controlfile.
    But the tape backups are failing ever since then.
    Is it because of password file problems ? This is a a totally new database and also DBID is different . But database name is same and created from backups of old database.
    Backups fail with this error.
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    ORA-01031: insufficient privileges
    But the RMANUSER has the same privileges as in other databases on this server.
    SQL> select username,sysdba,sysoper from v$pwfile_users;
    USERNAME SYSDB SYSOP
    SYS TRUE TRUE
    RMANUSER TRUE FALSE
    SQL> select privilege from dba_sys_privs where grantee='RMANUSER';
    PRIVILEGE
    CREATE SESSION
    UNLIMITED TABLESPACE
    How to resolve this issue ?

    I actually recreated the password file using orapwd utility. But when checked the V$PWFILE_USERS it showed no users. Not even SYS
    And I tired to grant SYSDBA to RMANUSER. It failed with the following error.
    ERROR at line 1:
    ORA-01999: password file mode has changed from 'exclusive' to 'shared'
    But the show parameter REMOTE showed that remote_login_passwordfile is still EXCLUSIVE. And database uses an INIT file, not SPFILE.
    I had to move back the copy of Old password file and now it shows two users (SYS and RMANUSER) again.

Maybe you are looking for