Windows 2008 R2 with Connection Broker
Hi
Ive been trying to add windows 2008 r2 farm to vdi.
Ive done the steps to install the certificate etc on RDS hosts. I can add either one of the hosts as a desktop provider. But when i want to add 2 or more hosts to one desktop provider VDI complains the host belongs to a different farm. Although i've checked the farm names and loadballancing works.
whats the problem here ?
The name defaults to the hostname. it doesnt pull the farm name from the winrm if you mean that.
That command says it can not find resource.
C:\Users\Administrator>winrm e wmi/root/MicrosoftNLB/* -filter:"select ClusterNa
me from MicrosoftNLB_ClusterSetting"
WSManFault
Message
ProviderFault
WSManFault
Message = The WS-Management service cannot process the request.
The service cannot find the resource identified by the resource URI and selector
s.
Error number: -2144108544 0x80338000
The WS-Management service cannot process the request. The service cannot find th
e resource identified by the resource URI and selectors.
Basicly what i did.
Install RDS Host on 2 servers.
Install RDS Connection broker on 1 server
Add RDS hosts to Connection broker local secuirty group
Joined 2 RDS hosts to the connection broker and same farm. Enabled RDS Load balancing.
added DNS entries for farm name.
Installed selfssl certificate ect... for WinRM.
Here the steps were a bit different than in the docs. 2008 r2 is a bit different.
1. Cant install resource kit 6.0. but i got arround that no problem. I think i saw some IIS resource kit allready available in the Windows "Features" but nevermind. Selfssl worked.
2. I couldnt do the winrrm crate/config/listener.... command. I had to run winrm qc (quickconfig) first. And then it worked.
rest of the story u allready know :)
regards
Similar Messages
-
Here is the scenario:
Legacy Host: Windows 2008 R2
Guest VM: Windows 2008 R2 with Exchange 2013 SP1 DAG cluster.
After importing the VM (2008 R2 and Exchange 2013 DAG) into a 2012 R2 host (Cluster). (copy VM files to new 2012 R2host) Everything works fine.
Then upgrading "Installation Services" (for Windows 2012 R2 host) on the imported VM runs fine with no errors to the "Restart" prompt. VM than shows: "Configuring Windows updates 32% complete. Do not turn
of your computer." Hangs there for about 20 minutes until is says "shutting down". Hangs there for 20 minutes until power off. Restart to normal start; "Preparing to configure Windows. Do not turnoff your computer." proceeds slowly
to "Configuring Windows updates 32% complete. Do not turn of your computer." hangs there again indefinite. Sometime hangs at shutdown cycle and "Configuring Windows updates 32% complete. Do not turn of your computer." indefinitely.
I moved 20 other machines from a 2008 R2 host to new Windows 2012 R2 hosts all of these machines install the 2012 R2 Integration services just fine on the 2008 R2 VM. Just the 2008 R2 VMs clustered (DAG) and Exchange 2013 SP1 do not take the Integration
Services upgrade.
Any advise from Microsoft? I know I could decommission the DAG and Exchange machines and install Integration services on the native box before Exchange and DAG and that would sure work, but I'd rather avoid that amount of work for a simple integration layer
upgrade.
Thanks
Gerhard Waterkamp ACSLA Inc.Hi,
Could you try use the following method to fix this issue first?
1. Run the System Update Readiness Tool, then check if there is any error in the Checksur.log and checksur.persist.log.
1. Please run the System Update Readiness Tool on this affected server. Please download this tool from the following Microsoft article:
Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, and for Windows 7
http://support.microsoft.com/kb/947821/en-us
2. The System Update Readiness Tool creates the log files that captures any issues that the tool found or fixed. The log files are located at the following location:
%SYSTEMROOT%\Logs\CBS\
3. Please paste the checksur.log here for analysis.
If there is no error found, please try the following step.
==================================
2. Use Fix it tool to reset the Windows Update components.
1. Open the following link.
http://support.microsoft.com/kb/971058/en-nz
2. Select Windows 8.1, Windows 8 and Windows 7 in the product selection box.
3. Click “Run Now” to reset the Windows Update components.
Note: We can reset the Windows Updates manually by following the steps in the KB above.
3. Use the System File Checker tool to repair missing or corrupted system files
1. Open the command promote with Administrators.
2. At the command prompt, type the following command, and then press ENTER:
sfc /scannow
Any errors are found in the steps above, please let me know.
Hope this helpful.
Best Regards,
Jason Zeng
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Install Oracle 11gr2 on Windows 2008 R2 with ASM step by step Guide needed
Hi,
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.
Thanks in advance.
SujithHi Sujith;
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.You need to install grid first(Software only) its neccessary for ASM, Than you need to use asmca to create asm disks than you need to install 11gr2
All doc avaliable at:
http://www.oracle.com/pls/db112/homepage
Regard
Helios -
SAP ECC 6.0 installation in windows 2008 clustering with db2 ERROR DB21524E
Dear Sir.,
Am installing sap ECC 6.0 on windows 2008 clustering with db2.
I got one error in the phase of Configure the database for mscs. The error is DB21524E 'FAILED TO CREATE THE RESOURCE DB2 IP PRD' THE CLUSTER NETWORK WAS NOT FOUND .
DB2_INSTANCE=DB2PRD
DB2_LOGON_USERNAME=iil\db2prd
DB2_LOGON_PASSWORD=XXXX
CLUSTER_NAME=mscs
GROUP_NAME=DB2 PRD Group
DB2_NODE=0
IP_NAME = DB2 IP PRD
IP_ADDRESS=192.168.16.27
IP_SUBNET=255.255.0.0
IP_NETWORK=public
NETNAME_NAME=DB2 NetName PRD
NETNAME_VALUE=dbgrp
NETNAME_DEPENDENCY=DB2 IP PRD
DISK_NAME=Disk M::
TARGET_DRVMAP_DISK=Disk M
Best regards.,
please help me since am already running late with this installation to run the db2mscs utility to Create resource.
Best regards.,
Manjunath G
Edited by: Manjug77 on Oct 29, 2009 2:45 PMHello Manjunath.
This looks like a configuration problem.
Please check if IP_NETWORK is set to the name of your network adapter and
if your IP_ADDRESS and IP_SUBNET are set to the correct values.
Note:
- IP_ADDRESS is a new IP address that is not used by any machine in the network.
- IP_NETWORK is optional
If you still get the same error debug your db2mscs.exe-call:
See the answer from Adam Wilson:
Can you run the following and check the output:
db2mscs -f <path>\db2mscs.cfg -d <path>\debug.txt
I suspect you may see the following error in the debug.txt:
Create_IP_Resource fnc_errcode 5045
If you see the fnc_errcode 5045
In that case, error 5045 which is a windows error, means
ERROR_CLUSTER_NETWORK_NOT_FOUND. This error is occuring because windows
couldn't find the "public network" as indicated by IP_NETWORK.
Windows couldn't find the MSCS network called "public network". The
IP_NETWORK parameter must be set to an MSCS Network., so running the
Cluster Admin GUI and expanding the Cluster Configuration->Network to
view all MSCS networks that were available and if "public network" was
one of them.
However, the parameter IP_NETWORK is optional and you could be commented
out. In that case the first MSCS network detected by the system was used.
Best regards,
Hinnerk Gildhoff -
Windows 2008 R2 ODBC connect to Oracle Linux with 11g db
Hi
i installed a fresh oracle linux and installes 11.2.0 database server. the server works fine but i have a proplem to connect to the database from a windows 2008 r2
client. For the client connection i installed the oracle instantclient on the windows system. Now i want to configure the system dsn to connect to the oracle
server like this
data source description: vSphere 64
description: ----
TNS Service Name: VCDB
user id: system
then i go to TEST connection
Service Name: VCDB
user name: system
Password: mypassword
so i copied the tnsnames.ora from the server to the client
then i get
ora-12504 tns listener was not given the SERVICE_NAME in CONNECT-DATA
here´s my tnsnames.ora from the client
VCDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.31.98.173)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = vcdb.vmware)
i tested serveral config´s but nothing works. I can ping the server and also i cn telnet the server on port 1521. The listener on the server works fine
lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 20-SEP-2010 20:48:52
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=vc-db1.mydomain)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-SEP-2010 20:47:45
Uptime 0 days 0 hr. 1 min. 7 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/vc-db1/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=vc-db1mydomain)(PORT=1521)))
Services Summary...
Service "vcdb.vmware" has 1 instance(s).
Instance "vcdb", status READY, has 1 handler(s) for this service...
Service "vcdbXDB.vmware" has 1 instance(s).
Instance "vcdb", status READY, has 1 handler(s) for this service...
The command completed successfully
but it´s not possible to create a connection to the server. My enviroment variables are this
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
ORACLE_HOSTNAME=vc-db1.mydomain
ORACLE_SID=vcdb
ORACLE_TERM=xterm
so i think on the server site everything is correct. How could i establish a connection from the windows client
to the linux database server. Or is ODBC the wrong method for this?
Kind regards
ACID25
Edited by: 796038 on 20.09.2010 12:12"connectstring" is not a valid attribute with Oracle's ODBC driver, so since there is no datasource attribute specified, the app is trying to connect to a local database, and since you don't have one, you get 12560.
To resolve the problem, pass DBQ= instead of CONNECTSTRING=
http://docs.oracle.com/cd/B19306_01/server.102/b15658/app_odbc.htm#i1093897
Greg -
Slow printing from windows 2008 R2 with Cisco 6509
Dear All,
I am having a wiered issue in my network. We have a windows 2008 R2 print server. Normal documents print's fine. If you print a image or pdf file, it takes a long time to print. For example a 2 MB PDF image with two page took me 10 minutes to print. The data from the server to the physical printer is really slow. To test it, i have loaded the driver on another windows 2008 R2 and the result is same slowness. We uses Xerox Colorqube 9303 printers.
I have tried most options from microsoft which didnt help. I have installed a windows 2012 server to test if its specific to windows 2008, but the result remains same. Printing from a windows PC is perfectly fine; 32 bit PCs we have.
I have seen someone got a solution to this by disabling ip local-proxy-arp, this is not enabled nor available in my switch.
I have 6509 as core switch with IOS 12.2(33)SXH8. Does anybody come across such a scenario? Is there any special port configuration required for windows 2008 R2 to work normal?
A sample interface configuration is given below
GigabitEthernet1/10 is up, line protocol is up (connected)
Hardware is C6k 1000Mb 802.3, address is c89c.1dd9.2619 (bia c89c.1dd9.2619)
Description: ***Connect-to-Server-form***
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, media type is 10/100/1000BaseT
input flow-control is off, output flow-control is on
Clock mode is auto
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:13, output hang never
Last clearing of "show interface" counters never
Input queue: 0/2000/88/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 151000 bits/sec, 30 packets/sec
10067885 packets input, 4366947776 bytes, 0 no buffer
Received 36631 broadcasts (2569 multicasts)
0 runts, 0 giants, 0 throttles
11 input errors, 1 CRC, 0 frame, 77 overrun, 0 ignored
0 watchdog, 0 multicast, 0 pause input
0 input packets with dribble condition detected
251401032 packets output, 96130506019 bytes, 0 underruns
0 output errors, 0 collisions, 5 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
Any help would be really appreciated.
Thanking you in advance.
Prince MathewHello
Printing from a windows PC is perfectly fine; 32 bit PCs we have.
- Printing directly from a computer which has the locally installed driver is printing fine.- it does seem to suggest the server or the network- however locally installed print drivers work fine so the communication to the printer from the client over the network seem to be okay.
However the centrally installed print drivers means the processing job is now with the server which is between the printer and client
Whats the RTT from client and server and client to printer .etc? - perform a extended ping to validate connectivity between all 3
Have you hardcoded the server port to the nic setting of the server - Are the speed/duplex settings manually applied to the servers if so make sure they are also manually set on the switch ports realting to these servers - this is apllicable to the printers too.
Is the same driver used locally is also on the printer server correct?
Whats printing protocol ( RAW) and port being used on the printer server
Do you have print pooling setup on the server -(typo in last post)
Are these printer shared in A/D and deployed by GPO -are the correct permissions set on these shares
Check the printer permission on the spool folder also - users need at least read & execute privileges
Have you manually cleared the print spooler folder and restarted the spooler service on the server?
Are the print jobs being render to the clients or is the server taking the load of processing the print job?
Any printer queue priorites set?
res
Paul
Please don't forget to rate any posts that have been helpful.
Thanks. -
Windows 2008 problems with Delphi and the Crystal Reports VCL
Anybody had any luck with Crystal XI using the VCL on a Windows 2008 machine?
In testing we've found that everything seems to work, except that the user can not select a different printer. When I go to the Printer Setup button, the panel that pulls up used to have, in previous Windows versions, a printer button inside the Printer Options box. Windows 2008 does not, so the end user can not select a different printer to print to than their default.
Anybody have any ideas on:
1) Am I just doing somthing wrong
2) A fix for the Crystal XI VCL that will address the probelm
3) An option on how to call Crystal Reports from inside a Delphi program without the VCL?
Obviously, I'm hoping I don't have to go with #3, but if that's the only solution I guess I need to know now.
Mike NielsenHi Mike,
Try these links:
https://www.sdn.sap.com/irj/boc/businessobjects-samples?rid=/webcontent/uuid/80774579-b086-2b10-db91-ed58c4dda375
If that link doesn't work try this one:
https://www.sdn.sap.com/irj/boc/businessobjects-samples
Then click on the Crystal Reports .NET SDK link.
Gets you to the .NET downloads and you should see this, try the RAS samples, gives you the most functionality:
Crystal Reports .NET SDK Applications
All Sample Applications
All | Exporting/Printing | Report Modification | Viewing | Home
Report Application Server .NET Sample Code Code Sample(ZIP 177 KB)
Contains Visual Studio 2005 Web sample code pages that highlight features of the RAS SDK, including report parameter and formula modification, database logon, and exporting.10 Oct 2008
NET-CS2005_CRNET_CR115_Set_Viewer-Locale-by-Page Code Sample(ZIP 51 KB)
This sample shows you how to change the multilingual settings for the .NET web form viewer control (CrystalReportViewer) to any locale of your choice. The locale is set via a QueryString variable. The settings are changed on the webform page level instead of using the web.config. Changing the Regional Settings or IE Language Settings will not impact this sample. Note: This has only been tested on Crystal Reports XI R2 with Visual Studio .NET 2005.14 Jul 2008
NET-CS2003_RAS-Unmanaged_CR115_Modify_Command-Table-SQL Code Sample(ZIP 31 KB)
"This sample application shows how to retrieve and change the text of a SQL command table from a Crystal Report using the CR .NET SDK and in-process Report Application Server (RAS) Report Creation API (RCAPI). Note that you must have SP2 for Crystal Reports XI R2 for this sample to work. Previously you could access the RAS .NET SDK from the ReportDocument object only if you had a dedicated RAS server. Now you can use RAS in-process to accomplish this. "05 Mar 2008
NET-CPP-Win2005_CRNET_CR115_Change_Record-Selection-Formula Code Sample(ZIP 3 MB)
A .NET C++ Windows application that demonstrates how to change a record selection formula at runtime.03 Mar 2008
Crystal Reports 2008 .NET SDK Tutorial Samples Code Sample(ZIP 2 MB)
This sample contains Visual Studio 2005 Web sample code projects that highlight features of the Crystal Reports .NET SDK, including viewing and exporting reports, filtering data and setting parameters, and connecting to different data sources.19 Feb 2008
NET-CS2005_CRNET_CR115_Modify_Image-Location Code Sample(ZIP 90 KB)
This sample application shows how to change an image in a Crystal Report at runtime using the graphic location formula in the CR .NET SDK (C#).16 Feb 2008
NET2003-CS-Web_CRNET_CR115_change_graphic-location Code Sample(ZIP 103 KB)
This sample application shows how to change an image in a Crystal Report at runtime using the graphic location formula in the CR .NET SDK (C#).31 Jan 2008
Crystal Reports .NET SDK u2013 Sample Applications from Tutorials Code Sample(ZIP 1 MB)
This file contains C# and VB .NET Windows and web sample applications. These samples were built using the tutorials provided in the u2018Crystal Reports .NET SDK u2013 Additional Documentation and Tutorialsu2019 (cr_net_sdk_additional_en.zip). These sample applications apply to Crystal Reports 9 and 10, and Crystal Reports for Visual Studio .NET 2002 and 2003.10 May 2006
Thanks again
Don -
Windows 2008 server with a Z77A-GD65 m/b?
Hi,
I picked up a Z77A-GD65 last evening assuming I could install Windows 2008 server on it. Upon trying, the install DVD doesn't even see the hard drives.
Any suggestions? Is this m/b not compatible with Win 2008 servers?
Thanks!
--BenTry loading the AHCI drivers just like you would raid drivers.
(Intel Rapid Storage Drivers)
http://www.msi.com/product/mb/Z77A-GD65.html#/?div=Driver&os=Win7%2064
If you are trying to use SATA_7 or SATA_8 you will need to load the AS Media controller drivers: -
"BCP Commit Failed" New Install On Windows 2008 R2 with SQL Server 2008 R2
I am installing a new Netweaver install on a virtual machine loaded with Windows 2008 R2 and SQL Server 2008 R2. The install gets to the "Import ABAP" phase and just hangs. SAPINST says it is still running, but there is no activity to suggest there is anything going on. There are no errors in the main logs, but after digging a little I did find these errors in the SAPSDIC.log file.
(IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_CHAR_COND~0'.>
(IMP) ERROR: EndFastload: rc = 2
(DB) INFO: BADI_FILTER created
(DB) INFO: BADI_FILTER~0 created
(IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_FILTER~0'. Ca>
(IMP) ERROR: EndFastload: rc = 2
(DB) INFO: BADI_IMPL created
(DB) INFO: BADI_IMPL~0 created
(IMP) INFO: EndFastLoad failed with <2: BCP commit failed:[Microsoft][SQL Server Native Client 10.0][SQL Server]Violation of PRIMARY KEY constraint 'BADI_IMPL~0'. Cann>
(IMP) ERROR: EndFastload: rc = 2
Anyone have any ideas as to what might be going on? I can't find anyone with this exact same error. And this is our first attempt at installing a system with Windows 2008 R2 and SQL Server 2008 R2. All of our other Windows SAP systems are on Windows 2003 and SQL Server 2005 and we're in the process of upgrading - this being the first system.
Thanks in advance,
MichaelSet BCP_LOB=1 in your system environment
Note 1156361 - R3load: Fastload doesn't support LOB-columns
Markus -
Problem with Connection Broker name
Hi,
When i change the connection broker name using for example:
Set-RDClientAccessName -ConnectionBroker serverbrokerName.domain.com -ClientAccessName NewBrokerName.domain.com
no.manchete.pt
And setup a DNS pointing to NewBrokerName.domain.com
When someone tries to connect it gives him the following error:
"Your computer cannot connect to the remote computer because the Connection Broker couldn't validate the settings specified in your RDP file. Contact your network administrator for assistance".
What am i doing wrong?
Sincerely,
AMHi,
When i change the connection broker name using for example:
Set-RDClientAccessName -ConnectionBroker serverbrokerName.domain.com -ClientAccessName NewBrokerName.domain.com
no.manchete.pt
And setup a DNS pointing to NewBrokerName.domain.com
When someone tries to connect it gives him the following error:
"Your computer cannot connect to the remote computer because the Connection Broker couldn't validate the settings specified in your RDP file. Contact your network administrator for assistance".
What am i doing wrong?
Sincerely,
AM
The services needed to be restarted, now im facing another problem with the new name:
error: "Remote Desktop can't connect to the remote computer "NewBrokerName.domain.com" for one of these reasons:
1) Your user account is not listed in the RD Gateway's permission list.
2) You might have specified the remote computer in NetBIOS format ( for example, computer1), but the RD Gateway"
EDIT: Also solved this error RD Gateway was only allowing connections to Domain Computers, change to all resources -
Does windows 2008 compatible with Oracle 10.1.0.2.0
Hi Dear,
Does windows 2008 compatible or support with Oracle 10.1.0.2.0 ? if not then
Oracle 11g compatible with windows 2008 server .
we have Oracle 10g application server on top of oracle 10.1.0.2.0 database on AIX. we are looking forward to migrate oracle 10g database from
AIX platform to windows 2008 server. so i need to be 100 sure that windows 2008 support oracle 10g,if not if we migrate oracle 11g then oracle 1og application
server work on top of 11g database. please assist me.
Best Regards
------------------Hi Sybrand,
sybrand_b wrote:
Migrating from a real scalable OS like AIX or any other flavor of Unix, like Linux to a non-scalable OS like Windows 2008 can not be recommended.
If you do this only for cost reasons, you should reconsider.
My guess is this is some managerial directive.I agree with you that any flavour of *nix is better than Windows, but the reality is that there might be situations where a Windows-platform is better.
If the entire server park is Windows, then the delivery will be better with a platform change. It's much likelier that the machine will stand abandoned in a corner, slowly rotting away if nobody really knows how to to manage the beast...
The world isn't black and white, and it isn't always about which is the better technical platform. If it was, the whole world would be using *nix-servers... ;-)
//Johan, OCP and Unix/Linux sys admin since 2000 -
Windows Server 2012 R2 Connection Broker migration
Hi All,
I'm in the process of a VMware to Hyper-V migration and whilst in the process rather than migrating the 2012 RDS VM's over to Hyper-V I have decided to setup a bunch of 2012 R2 VMs. My original setup was
1 x Windows Server 2012 VM running RDSCB, RDSGW & RDSWA
2 x Windows Server 2012 VMs running RDSSH
My new environment runs
1 x Windows Server 2012 R2 VM running RDSCB, RDSGW & RDSWA
2 x Windows Server 2012 R2 running RDSSH
I have the connection broker running in HA mode for SSO purposes and publishing the correct name. This also made life easier when running the upgrade as I joined the new 2012 R2 VM to connection broker group which worked fine.
I then set the new 2012 R2 RDSCB VM as the active connection broker. At this point the old 2012 VM was decommissioned (Without the RDS roles removed). As the old 2012 VM is now offline and un contactable when I add any new session hosts to the collection
I see an error stating it can't contact the old 2012 RDSCB.
I have been through the RDS connection broker database and removed any reference to the old RDSCB VM but this hasn't helped. Does anybody have any other ideas or would you suggest re creating the collections from scratch?
AlexHi Alex,
To avoid future problems I recommend you wipe out the RDS deployment and recreate it again so that you will have a fresh database. There is no need to switch to HA mode just so that you can change the published name. I created a cmdlet that allows
you to change it in non-HA environments:
Change published FQDN for Server 2012 or 2012 R2 RDS Deployment
http://gallery.technet.microsoft.com/Change-published-FQDN-for-2a029b80
-TP -
JFServer.exe fault in Windows 2008 server with Central V 5.7
I have an installation of Central 5.7 running 6 instances on Windows 2008 server 64 bit and have noticed that the six instances don't always come up when the machine is rebooted. Here is the error that it logs in the Central Log.
"Open of table 'C:\Users\Userid|Appdata\Local\Temp\JFX8A00.tmp' failed.
This also sometimes happens when I make changes to jobs in one of the instances and there seems to be no pattern wo what instances it happens in.
This behavior does not appear to happen with Central 5.7 running on XP or 2003 server.
Any thoughts on why this might be happening?This is a recently known issue specific to Central on Windows 2008
Contact Adobe Support to obtain the patch. You can find their contact details in your support agreement. -
How to set a default printer using vbs on windows 2008 R2 with remote desktop services
Hello
It seems I wasn't in the right places before / threads. BIG Sorry.
Here's the problem: I have this VBScript:
On any computer, the Default Printer "HisBadPrinter"
strPrinterName = "mySuperPrinter"
Set objPrinter = Helper.CreateObject("WScript.Network")
objPrinter.SetDefaultPrinter strPrinterName
In Xp, Windows 7 it work perfect, The default printer is being changed.
But in Remote Desktop on Windows Server 2008 R2 it is not working, with any type of account (Administrator, user, powerUser...) "HisBadPrinter" is always the default printer and it's always printing on it without any error messages.
Help Please.Ok, here what I have in my ControlPanel > Devices and Printers
Adobe PDF (redirected 3)
Brother HL-4150CDN series on infovm1dc (redirected 3)
Generic / Text Only (redirected 3)
HP Color LaserJet 3800 PCL 5c on infodc3 (redirected 3)
Microsoft XPS Document Writer
Microsoft XPS Document Writer (redirected 3)
PDFCreator (redirected 3)
Now Here what I got when I executed the bit of code :
TS011
Adobe PDF (redirected 3)
TS013
Microsoft XPS Document Writer (redirected 3)
TS012
Generic / Text Only (redirected 3)
TS015
Brother HL-4150CDN series on infovm1dc (redirected 3)
TS016
HP Color LaserJet 3800 PCL 5c on infodc3 (redirected 3)
TS014
PDFCreator (redirected 3)
TS002
DIRECT - Brother HL-2460 (redirected 2)
TS006
PDFCreator (redirected 2)
TS003
Fax (redirected 2)
TS005
Microsoft XPS Document Writer (redirected 2)
TS007
Brother HL-2460 on infodc3 (redirected 2)
TS004
Microsoft Office Document Image Writer (redirected 2)
TS001
Brother HL-4150CDN series on infovm1dc (redirected 2)
XPSPort:
Microsoft XPS Document Writer
There is no printer called "\\ALPHA\HP LaserJet P2015 Series PCL 6".
OK -
Oracle Database XE - apex on Windows 7 - Problem with Connection from another Windows 7 Computer
Hello,
I started with Oracle Database XE 11g, with apex, did the upgrade to Apex 4.2.6 and started in developing a small Application.
I wanted to Connect to my Computer A (with Database runing on it) from another Windows 7 Computer B.
So I put in in Firefox: //A:8080/apex but I only received a timeout.
Of course on both Computers there is a windows-Firewall running, so I stopped on both Systems the Firewall, but its the same still.
In the windows explorer running on Computer B , I can see the data of Computer A and both Computers are in the same home-net-group. (sorry for my poor english).
Is there anyone who cann tell me how to get the Connection running ?
Maybe I didn't see the info about this in the manuals, if it is there, please give me a hint.
many thanks
Wilhelm Kästner SalzburgHi,
Check if this helps
https://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm#XEINW127
Regards,
Jari
Maybe you are looking for
-
can someone please help me before i pull all of my hair out. i have windows vista - 64 bit - the HP IQ500 touchsmart with a wireless keyboard. in the systray the num caps and scroll lock appears as little blue boxes (when on). everynow and again they
-
Disabled Button Gets Focus in 1.4 and not in 1.3
Hi I am in the process of migrating from version 1.3 to 1.4.2 I have a screen on which I I have a button which is disabled when teh screen initializes. There are other items to which I can navigate through TAB. If i keep pressing Tab so that the focu
-
How to send a PDF or other binary through NW Gateway service.
Thank you for your help.
-
I get this error when I run quick time server for Solaris on on e of my boxes. However the same thing works on another server with same OS and patch levels HTTP/1.0 500 Perl execution failed Server: DSS 3.0 Admin Server/1.0 Date: Tue, 22 Apr 2003 15:
-
Installing Xcelsius on a new computer
Can someone from SAP / Xcelsius please contact me about installing my Xcelsius software on my new computer. I sitll have the key code. Thanks