Windows 2008 Remote Desktop Services - Word Spell Check

We are running Windows 2008 servers on our network with remote desktop services (terminal services). We currently experiencing a challenge with Word 2010. The spell check feature is not working, when you try and run it gives an error "Microsoft Word
can't check the spelling or grammar in this document. An error occurred and this feature is no longer functioning properly." After about 5 clicks it comes up with Cannot find the proofing tools for English (Australia). It eventually it works, need to
get it to work the first time. I have searched all around but can't seem to find the answer.

I'd try them over here.
Word
2010 forum on Microsoft Answers
Word IT Pro forum on TechNet
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

Windows Components/remote desktop services/remote desktop session host/profile doesn't appear to be working on 2008R2 boxes

I have two domains.   One is an account domain with a one way trust with the resource domain.   Resource domain trusts the account domain and has a number of 2008R2 servers running within. I am experiencing severe logon delays
due to these servers being unable to access the server that hosts the user home folder specified directly on the user account profile tab from the account domain.   When using my workstation in the actual account domain (corporate) I have no
problems.
Because of these network restrictions, I need to override the 2008R2's desire to access that user home folder location in the account domain.
So far the best thing I have found to try is Windows Components/remote desktop services/remote desktop session host/profile/Set Remote Desktop User Home Directory
The problem is that so far I have tried to configure this to point to both a local folder as well as a network path and it doesn't appear to be doing anything.   Not seeing any errors in the app or system log either.
It is still trying to map the path in the account domain.
Any ideas?
Is there a better way to accomplish my goal?   The servers in the resource domain will be Citrix servers and there will be a lot of users connecting from the account domain.
I tried this setting too, but it only seems to work on the 2012 machines in my Resource domain.
With the introduction of Windows 8 and Windows Server 2012 there is now a new group policy setting called “Set user home folder” and is found under Computer Configuration > Policies > Administrative Templates > System > User Profiles
Help!

Hi,
This might be due to permission problems. Please check whether the user accounts for whose home folder to be redirected have permissions in the shared folder specified in the server.
Checkout the below link on Best Practice for creating Roaming Profile and Folder Redirection
http://www.grouppolicy.biz/2010/08/best-practice-roaming-profiles-and-folder-redirection-a-k-a-user-virtualization/
Regards,
Gopi
JiJi
Technologies

Windows 2012r2 Remote desktop services: session based: Locked down

I am trying to lock down the remote desktop services sessions , just like I did with windows 2003 TS.
I am following this article :
http://www.it.ltsoy.com/windows/lock-down-remote-desktop-services-server-2012/
I have done till disable registry modifications.
I stopped to check if the changes made were in effect before continuing.
What did work is the disable server manager popup at user logon.
Nothing else seems to have taken effect: just to mention a few
Microsoft administrative tools,
network and sharing center.
ABCD drives are still being seen.
What did I miss ?
regards
Leopold
(first time I am doing gpo with > ms 2003) so maybe I am doing something wrong.)

Hi Leopold,
Here is related article below for you:
How to restrict users from accessing local drives of an RD Session Host server while using RemoteApp programs
http://blogs.msdn.com/b/rds/archive/2011/05/26/how-to-restrict-users-from-accessing-local-drives-of-an-rd-session-host-server-while-using-remoteapp-programs.aspx
If the group policy setting doesn’t take effect, please log off users then log back on.
If the issue persists, please run GPresult.exe to determine whether the setting is applied to users.
Gpresult
https://technet.microsoft.com/en-us/library/cc733160.aspx?f=255&MSPPError=-2147217396
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

To install Remote Desktop Services User CAL on Windows Server 2008 R2 Enterprise Edition with SP1

Dear Sir,
Presently we have installed Windows Server 2008 R2 Enterprise Edition with SP 1. And now i would like to install Remote Desktop Services User CAL on this server. I have 25 digit product key of Windows Server
2008 R2 Remote Desktop Services User CAL (20). Downloaded this product key from our MSDN Subscriptions.
Kindly suggest me how to install (CAL server with product key that i have) and configure remote desktop services on my above existing server also how to point other server with my CAL server.
Thanks

Hi,
1. Install Remote Desktop Session Host and Remote Desktop Licensing Role Services using Server Manager.
2. Open RD Licensing Manager (licmgr.exe), Activate your server, then install your license
3. In RD Session Host Configuration (tsconfig.msc), set the Licensing mode to Per User and Specify your RD Licensing server name (itself). If you want you may configure these two settings via group policy setting instead. The path of the
group policy settings is Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
4. You may point other RDSH servers to your RD Licensing server using RD Session Host Configuration or via group policy as mentioned above.
5. Optionally you may consider installing other Remote Desktop Role Services such as RD Gateway, RD Web Access, RD Connection Broker, etc.
-TP

Audio service hangs on Windows Server 2008R2 with Remote Desktop Services

Hello!
I have some terminal servers on Windows Server 2008R2. Users have the ability to use web browsers (IE, Firefox) with the included Flash Player, IM clients / Internet
telephony (Skype, ICQ), Windows Media Player, Office, and a specific internal software (works with MS SQL). I have the following problem: the Windows audio service hangs up that leads to hangup of all programs which use it, such as: any sites in Internet with
a flash content (in all browsers), ICQ, Skype.Even logging out the session hung when tried to lose a sound. It's impossible to stop or restart service from the services.msc the service just hang with status "restarting". To stop service I terminate svchost
process. As soon as the audio service is stopped - all programs start to work correctly (certainly without a sound). This problem appeared not suddenly - periodic hangups of programs on servers were marked long ago (more than half a year), but not directly
were connected to audio service, especially there were they rather rare (on the average once a week - two) and were corrected by server reset. The error message:
Error container , type 0
Event name: AppHangXProcB1
Reply: No data
Ident CAB: 0
Problem signature:
P1: iexplore.exe
P2: 9.0.8112.16446
P3: 4fb57c8f
P4: 77c1
P5: 131200
P6: svchost.exe:AudioClientRpc
P7: 0.0.0.0
P8:
P9:
P10:
shall suggest an idea about a sound service, but in Event Viewer has no Windows Audio events.
Recently I updated Skype to the last version 6.0.66.120. Before was 4.2.35.155 because versions 5хх on Windows2008R2 with the Remote Desctop Services actually don't
work, if users at the server more than one or two. We checked the sixth version by the test machine with the terminal environment and very were delighted to its normal working capacity. However after installation of this client on production servers it appeared
that hangups of programs on servers began to occur on the average time at an o'clock in case of an average daily load (about 20 users on one server). If you have worked one or two users, problems weren't watched. Internet search led me to the support page
Skype, where the Windows 7 x64 user faced a similar problem in the fifth version of the program. But the solutions proposed by the support team does not help me. In addition, I found the advice to disable enhancements in the properties of the playback device,
but it is impossible for the "Remote Audio" device.
At the moment, on servers where I updated the Skype, I disabled the audio service. If within a reasonable time, I do not find a solution, I will have to revert
to an older version of Skype, but I would like to solve the problem completely.

Enable the Allow audio and video playback redirection Group Policy setting
To allow audio and video playback when connecting to a computer running Windows Server 2008 R2, you must enable the Allow audio and video playback redirection Group Policy setting. The Allow audio and video playback redirection Group Policy setting is located
in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Device and Resource Redirection and can be configured by using either Local Group Policy Editor or the Group Policy Management
Console (GPMC).
For more information about Group Policy settings for Remote Desktop Services, see the Remote Desktop Services Technical Reference (http://go.microsoft.com/fwlink/?LinkId=138134).
Is this policy applied? Refer:
http://technet.microsoft.com/en-us/library/dd759165.aspx
Also, have you tried update the audio device driver for this terminal server?

How to install the Remote Desktop Services role on a Windows 2012 R2 Server

Hello,
I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
1- Role-based or feature based installation
2- Remote Desktop services installation
I see the RDP install option in both cases.
1- Which one do I use?
2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
users use those?
Any help will be very much appreciated.
Thank You,
Victor.

TP,
Thank you for your response. I added the RD Licensing thru the Role-based option.
Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
Host -> Licensing
Use the specified RD license servers = NameOfMyServer
Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
Thank you again,
Victor

Setting Up Remote Desktop Services Windows 2012 DMZ

Hi
I'm new to the Windows 2012 RDS. I am trying to figure out some things.
I have an application that I would like to publish to the outside world to our customers.
Im thinking of using Windows 2012 remote desktop services and publish the app via web browser. So users go to the URL and see the application.
Do I need a client brooker and gateway server for this setup? or can i simply deploy a web access server on the dmz which then connects to my remote session host server inside?

Hi,
To allow outside access into your RDS environment you would need to use the RD Gateway role. This can be configured on the same box as your RD Web Access role if resources are limited.
The RD Gateway role uses ether TCP 443 or UDP 3391 depending on what you have chosen to configure. You need to create a port forwarding rule from and to the gateway box using 443.
Have a look at the following articles:
http://ryanmangansitblog.com/2013/03/27/deploying-remote-desktop-gateway-rds-2012/
http://ryanmangansitblog.com/2013/03/10/configuring-rds-2012-certificates-and-sso/
This should assit with the configuration.
Best regards,
Ryan Mangan | Ryanmangansitblog.com | Help keep the forums tidy, if this has helped please mark it as an answer

Remote Desktop Service Manager - configure permissions for Remote Desktop Users to Send Message, Disconnect, Logoff

Hello, dear colleagues.
We are using Windows Server 2012 R2 as Remote Desktop Server. Also use Windows Server 2008 R2 with Remote Desktop Service Manager to control RDS user sessions (Send Message, Disconnect, Logoff, Query Info).
Send Message, Disconnect, Logoff options works only for users in Administrators group.
I can't to configure permissions for Remote Desktop Users, specific user or AD group.
To set permissions I'm running RDS Host Configuration on Windows Server 2008 R2 and connect to Windows Server 2012 R2. Then double-click
RDP-Tcp, Security tab, add specific user account , AD group or configure
advanced permissions
for Remote Desktop Users.
But, as I sad above, these options works only for users in Administrators group. How to make it work for Remote Desktop Users or specific user, AD group?
Thanks.
P.S. If move specific user from Remote Desktop Users group to Administrators group on
Windows Server 2012 R2 - it works.

Hi,
You can prevent administrators from changing the permissions for a connection by applying the
Do not allow local administrators to customize permissions Group Policy setting.
This Group Policy setting is located in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security
Apart there is one command with which you can set the permission for that check the related
article. Additionally checkthis
thread for more detail.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

2012 remote desktop service and users temp folders

Hello guys,
in windows server 2012 R2 How I can set TEMP folder configuration (clean at logoff) ? in 2008 R2 it is set on terminal host configuration.
I would like that users when logoff nee dto clean temp folders.
thanks
Andrea

Hi Andrea,
Thank you for posting in Windows Server Forum.
We can configure the temporary folders on RDSH server by GPO setting. We can configure the option “Do not delete temp folder upon exit" and the "Do not use temporary folders per session” on below mention
path.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Temporary folders
Hope it helps!
Thanks.
Dharmesh Solanki

Prevent Load Balancing in a Remote Desktop Services Deployment

We need to prevent two Remote Desktop Session Hosts from load balancing between each other. Currently they are load balanced and users dont have a means of ensuring they end up on a particular server. Is there anyway that we can accomplish this?
Cheers

Hi,
You can try below group policy might useful in your case.
Computer configuration>Administrative Templates>Windows Components>Remote Desktop Services>Remote Desktop Session Host>RD Connection Broker
Use RD Connection Broker Load Balancing: Disable
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows 7 remote desktop connection cannot logoff the local user

Windows 7 remote desktop connection cannot logoff the local user
Remote Desktop connection:
(This experience is from Windows 7 remote to Windows Embedded Standard 7 computer)
I used Remote Desktop to try to log on to a Windows 7 (WES7E) computer and someone is already logged on locally (Console Session), I saw a message like this:
"Another user is currently logged on to this computer. If you continue, this user has to disconnect from this computer. Do you want to continue?"
I click on Yes.
Then I saw "Please wait for [username] to respond". No action from the logged-on local user, I waited for 30 seconds, then I was able to login the computer and at the same time was able to disconnect the logged-on local user.
Question:
1. "Another user is currently logged on to this computer..." message doesn't show me the actual logged-on user name. Is there any way to show the user name in this pop-up message?
2. After waiting for 30 seconds, I was able to login the computer and the logged-on local user is disconnected, however this local user is never been logged-off. I wanted to logoff the local user (with Console Session) when I made the connection remotely
to the computer from remote desktop (Just like Windows XP) Is there any group policy can change the behavior?
The policies I have looked at are:
Local Computer Policy | Computer Config | Admin Templates | Windows Components | Remote Desktop Services|Connections|Deny
logoff of an administrator logged in to the console session => disabled
Regards,
Mei Davis

Hi ,
These behavior is by design. There is no way to change that. Thank you for your understanding.
Best Regards.
Tracy Cai
TechNet Community Support

How to license remote desktop services in 2012 without a deployment?!?!

Am I crazy or is there no way to license a 2012 RDS server? I don't want to deploy a gateway or a connection broker. My servers are on a domain and I just want to point it to a license server for the CALs (per user).
Why can't I seem to do this and 2012 REQUIRES the use of some scaled out deployment?
what am I missing?

Hi,
You can Specify the name of the RD Licensing server and set the licensing mode using group policy. For example, you could use gpedit.msc on the server and modify the setting under the following path:
Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
-TP

Windows 2012 Remote desktop session host server not detecting RD licensing server

Hi,
We have a customer server which is Windows 2012. We installed RDS session host server role and configured it to use RD licensing server as per the
https://support.microsoft.com/kb/2833839?wa=wsignin1.0
After configuring, when I open RD license diagonser tool, it says, RD license server is not available. Also shows, credential not available. When I enter the credential by clicking, provide credentials, it does not get applied. I see no event logs related
to RD service. However, I see the below event log which points to RD licensing server.
DCOM was unable to communicate with the computer <RD license server> using any of the configured protocols; requested by PID 273c (C:\Windows\system32\mmc.exe).
Please help in fixing the issue.
Thanks,
Umesh

Hi Umesh,
Thanks for your comment.
During your configuration, have you specified RD License server for RDSH to use?
You can also specify a license server for the RD Session Host server to use by applying the Group Policy under below path.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Licensing
Use the specified Remote Desktop license servers – Provide the FQDN of the license servers to use
Also this setting can be specified by below method.
To configure the license server on RDSH/RDVH:
$obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
$obj.SetSpecifiedLicenseServerList("License.contoso.com")
Note “License” is the name of the License Server in the environment
To verify the license server configuration on RDSH/RDVH:
$obj = gwmi -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
$obj.GetSpecifiedLicenseServerList()
More information.
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
In addition you can refer this article for reference.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Install Remote Desktop Services Failed on Windows 2012 Server

I understand RDS is not recommended on DC due to security consideration. However since I want to play it at home, it is not much a concern. Such scenario works fine on Windows 2008 R2. But on Windows 2012, the RDS (session-based, have not
tried VDI, but expect same result) installation always fails and is incomplete on DC.
In \Administrative Tools\Terminal Services, I only have RD Licensing Diagnoser and RD licensing manager. The remote desktop service management service cannot be started (Error code: 0x88250001). Is there any extra configuration needed for RDS
working on Server 2012 DC or before the installation? Thanks.
Update: this issue has been solved in Windows 2012 R2 Server. According to
http://blogs.msdn.com/b/rds/archive/2013/07/09/what-s-new-in-remote-desktop-services-for-windows-server-2012-r2.aspx
"Single server RDS deployment including Active Directory. We now support running our RD Connection Broker role service on the same physical instance as an Active Directory Domain Controller. In addition, we published
guidelines for how RD Session Host could be used without the RD Connection Broker."
The guidelines (http://support.microsoft.com/kb/2833839/en-us) primarily apply to Windows 2012 Server.

Asinine. Simply Asinine. Microsoft took it out because of $GREED$.
RemoteDesktop has become so popular, they had to break it to make more money. Thats why they discontinued SmallBusinessServer.   If this practice is so tabooo... Why did MS go the opposite direction with SBS 2011 Premium Cal's? SBS2011
had DC, Exchange, RDS and Sharepoint,SQL, RemoteWebWorkplace, OWA all working in perfect harmony. It is an untrue statement then, that it was "allowed but not recommended"
Now you by Server2012 (core + two virtual) and its not enough for all this.
You need at least another $700 for another sever licence to have it all
and who knows if SQL will run on a DC, or Exchange, or R-DERP server. Another reacherous bridge to cross.
By far, the absloute worse release since Millennium. The product is not ready for production, we broke our rule of waiting until the first SP1 upgrade for this and Exchange 2013. Problems with USB drivers and networking running extreamly slow.
Our 2003 SBS server was at least three times as fast, and this server has SAS and SSD drives running. It can't get out of its own way, and IE10 is the most unstable piece of crap to come out of Redmond. Open wide and swallow - Mother Microsoft
knows whats best for you. YOU WILL EAT OUR SLOP AND LEARN TO LIKE IT.   Server2012 AKA "METRO-SERVER"
Now here I sit after 50 Hours back to back setting up a new R-DERP server 2012, AD, Have my RDP licences in my hand at $100 each, and WTH does Microsoft care if I install it on my DC. ITS MY DC. And the cost savings versus the "risk" was
previously MY decision.
Sure, I can install a couple of Virtual HyperV sessions but they are so tempremental to a power-outage in a small business its not worth it. I have to double up my server hard drive resources, buy a $800 battery backup unit and make sure to attach
the cable, and even then, if that Bi**H does not shut down properly, one bit goes awry in a VHD or VHDX file and you are screwed. Restore from lastnights backup and forget about todays work. Not to mention it will probably take a half day to try
to fix it, then recover it then tell the 30 users they lost a days worth of work.
HYPER-V is for test servers and has no place in a small (micro) business environment. 5-30 users.
Microsoft's solution, buy another server. Need Exchange? Buy another server or take the risky cheapskate route and spin up some VHD's. Might as well put a gun to your head and play russian roulette, at least you know you have a one in six
chance of failure. With MS, its a 100% failure for a dirty shutdown power loss, motherboard blows, memory goes corrupt in a few years, your conventional method of recovery is gone, and you have some upchucked VHD file to try to recover some of TODAYS
data from.
Screw server 2012 forever.
I will sell 2008 and SBS2011 Premium unitl it rots in hell like XP (of which there is NOTHING wrong with for the average, WORD, EXCEL, OUTLOOK and QUICKBOOKS that all SMB's use. Its MS $GREED$ Grab the world by the B**ls and squeeze with all
your might to squeeze every dime you can out of *SMB* because big business is going to run thier 2003 Exchange and 2008 servers into ground before they switch to this garbage.
YOU CANNOT INSTALL EXCHANGE 2013 on DC , OR on R-DERP server.
Go buy another server license and server or MOVE TO THE CLOUD and get fleeced every month.
I have 30 DC/R-DERP/Exchange and SBS2011 Premium servers all running for years in perfect harmony, locked down with security so the users can't even WIGGLE with something they are not supposed to work with. They get their apps, cannot install anything
and all these servers are running just fine behind the firewall and perfectly save. The track record of this combination is 100% stable and is up 24/7/365 with no problems. Do yourself a favor and throw this 2012 into the river, you don't need
any weights because it is LEAD and will sink to the bottom by itself.
Why, you ask? Official is "Its for your protection" The real reason? To sell you more $700 server licences.
Maybe for SMB, we start selling Linux NAS Servers, host the Exchange in the cloud and be hearded like cattle to the Microsoft slaughterhouse. One way or another, you are going to bleed.    A little each month to move to the cloud, or
a small fortune if you want to have it in house. Microsoft wants it to be more expensive to have in house. No more buying a server and running it for six years before you upgrade. They can't have in house servers competing with their cloud,
and small businesses are the low hanging fruit ripe for the pickin'.

REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER

I am using a window 7 professional service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but the seller did not send me any installation CD or instruction
on how to use it.
Please how can I use it on my window 7 professional service pack 1.
Thank you.

Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server. I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008.
http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
Here is a lab guide for 2012 -
http://technet.microsoft.com/en-us/library/jj134160.aspx
But, the explanation of your environment begs the question - what are you trying to do? You say you have a desktop OS and you are talking about Windows Server products. In that light, your question does not make a lot of sense.
. : | : . : | : . tim

Windows 2008 Remote Desktop Services - Word Spell Check

Similar Messages

Maybe you are looking for