Windows 2008 server with a Z77A-GD65 m/b?

Hi,
I picked up a Z77A-GD65 last evening assuming I could install Windows 2008 server on it. Upon trying, the install DVD doesn't even see the hard drives.
Any suggestions? Is this m/b not compatible with Win 2008 servers?
Thanks!
--Ben

Try loading the AHCI drivers just like you would raid drivers.
(Intel Rapid Storage Drivers)
http://www.msi.com/product/mb/Z77A-GD65.html#/?div=Driver&os=Win7%2064
If you are trying to use SATA_7 or SATA_8 you will need to load the AS Media controller drivers:

Similar Messages

JFServer.exe fault in Windows 2008 server with Central V 5.7

I have an installation of Central 5.7 running 6 instances on Windows 2008 server 64 bit and have noticed that the six instances don't always come up when the machine is rebooted. Here is the error that it logs in the Central Log.
"Open of table 'C:\Users\Userid|Appdata\Local\Temp\JFX8A00.tmp' failed.
This also sometimes happens when I make changes to jobs in one of the instances and there seems to be no pattern wo what instances it happens in.
This behavior does not appear to happen with Central 5.7 running on XP or 2003 server.
Any thoughts on why this might be happening?

This is a recently known issue specific to Central on Windows 2008
Contact Adobe Support to obtain the patch. You can find their contact details in your support agreement.

Bank Statement management in SAP B1 on a VMWare Windows 2008 server

Hi everybody,
One of our customer is using a VMWare Windows 2008 server with SAP B1.
Actual version of Business One is SBO 2007A PL 00 PL 15 (SQL Server 2005).
Since the installation of this server using VMWare, we encouter problems using the SAP B1 Integration Platform for the process of the bank statements.
Everything including bank statements transfer was working very fine on a "real" server before new implementation.
When trying to open the Integration Platform Control Center on the server, we now receive the following message regarding JAVA.
"JAVA Virtual Machine Launcher : could not find the main class : program will exit."
JAVA is well installed on the VMWare server.
We have searched for a solution on the Web and it seems that JAVA and VMWare are not compatible. Does anybody have any information about that ?
Does anybody already have this problem with Integration Platfom on VMWare server ?
Is there a solution to our problem ?
Thanks for all your contributions.
Best regards.
Michel

Hi Michel,
First of all, your PL is too low. AFAIK, the first supported PL for 2007A SP00 is PL30. You may upgrade your PL first to see if that is a bug or not.
Thanks,
Gordon

Windows 2008 Server - Cannot run Active Directory Users and Computers

Hi,
I am running Windows 2008 Server with latest windows updates installed. Directory Services Role also.
I attempt to open Active Directory Users and Computers tool and I get a;
Microsoft Visual C++ Runtime Library error;
"The Application has requested the runtime to terminate it in a unusual way. Please contact the application's support team for more information"
I click ok, then get the following debug info;
Problem signature:
Problem Event Name: APPCRASH
Application Name: mmc.exe
Application Version: 6.0.6001.18000
Application Timestamp: 47919524
Fault Module Name: msvcrt.dll
Fault Module Version: 7.0.6001.18000
Fault Module Timestamp: 4791ad6b
Exception Code: 40000015
Exception Offset: 0000000000029b06
OS Version: 6.0.6001.2.1.0.272.7
Locale ID: 3081
Additional Information 1: 43aa
Additional Information 2: cf3a46656318492c1997480001b6b0e0
Additional Information 3: 3837
Additional Information 4: 92f72e0d0589ff77cef51e0a413aeff6
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
If someone could please assist, it would be very much appreciated.
Regards
B

Hi,
To solidly troubleshoot this kind of issue, we need to debug dump file. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
However, I am also glad to share my research.
Some third party applications may lead to this error. Please check if you install other third party applications on Windows server 2008?
Also, please follow the article below to perform necessary steps to see how it's going?
FIX: You receive an "invalid page fault in module MSVCRT.DLL" error message after you install the run-time libraries from Visual C++ 6.0
http://support.microsoft.com/kb/190536/en-us
Hope this helps.
Best wishes
Morgan Che

Siebel 7.8 Windows 2008 Server

All,
I am trying to install Siebel 7.8 on Windows 2008 server with SQL 2008 DB. I looked up the compatibility and it says something about Binary Compatibility Support:
[http://download.oracle.com/docs/cd/E11886_01/V7/CORE/SRSP_78/SRSP78_ServerEnv3.html#wp1015753]
I installed the Siebel Enterprise and Server and Database Server. However, it gave me no option to choose/install the required Siebel components.
When I install Siebel Web Server, I get an error:
unable to launch "E:\sea78SWEApp\bin\metabaseedit.exe "E:\sea78SWEApp\bin\ENU\eapps.mtb"" error code: "-2147221164"
and nothing gets created in IIS.
Please help!!

I can speak from personal experience.
I recently setup Siebel 7.8 on SQL 2008 R2 in our test environment. Everything works well with the database.
You can run siebel 7.8 without any issue, you don't need the 7.8.2 update, but I do recommend it for a production system
When you go to install siebel, you will have to run setup.exe with the compatibility mode setting of "Windows 2003 sp1"
Use the SNAC, MS Sql 2005 ODBC client on you application server and gateway. The native sql 2008 client / driver will NOT work with siebel.
As Always, siebel is 32-bit and requires the 32-bit version of server 2008 for the gateway and application server.
IE 8 will need to run in compatibility mode, in order to work with the we application.
Other than that,
Its identical to a windows 2003 installation :)

Problem with 10.2.0.5 patch on Windows 2008 Server R2 64bit

Hello
I have HP server with Windows 2008 Server R2 64bit. I installed
latest 64-bit version of Oracle Database 10.2.0.4 and everything works fine and later installed the patch 10.2.0.5 (64 bits) as the Oracle maintains that with the R2 version of the system it is necessary to correct work.
Now, after uploading the patch database starts and closes
after about 15 minutes and my alert log file is changed to the binary version which do not see anything (means that after patch installation (10.2.0.5) the alert log file isn't normal text file and it looks like that:
Źýţ cśy iµ•eű .Ź ťy ťy Ř®y hčN)
You can read only the beginning and it's very large - 13 Mb after unpacking from ZIP.
Can anyone met with this configuration and knows how to solve
problem?
This is the link to my strange alert log file:
http://www.2shared.com/file/22MFap1V/alert_orcl.html
I attached my spfile.ora file too:
http://www.2shared.com/file/gUmID0fh/SPFILEORCL.html

Your alertlog is corrupted, it could be something about a virus or even a problem with disk drives. Have you scanned your server with anti-virus software? Have you scanned the disks?
Last questison: Have you upgraded your database after you installed the patch?
SQL> SHUTDOWN IMMEDIATE
SQL> STARTUP UPGRADE
SQL> SPOOL patch.log
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\catupgrd.sql
SQL> SPOOL OFFIf not, please read the "readme" file which comes with patchset (do not just run the above commands without reading Oracle documention).
Best Regards,
Gokhan
If this question is answered, please mark appropriate posts as correct/helpful and the thread as closed. Thanks

Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server

Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animesh

actualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus

Problem with update SCCM client to Sp1 CU3 on Windows 2008 server

Hi all,
I have problem with update SCCM client on Windows 2008 Server to 2012 Sp1 CU3. I have sent to deployment package with update (SP1 Cumulative Update 3 - server update) on four servers and after few minutes I have got in Monitoring\Deployment details four
this same errors in "Asset Details":
USER Message ID
Status type Description
NT\AUTHORITY\SYSTEM 1006
Error 3003
I love that types of error... which is har to find answer on google :-( I have tried but I haven't find any constructive :-( Did you met with something similar? Which log I should check (sorry - I'm still noob in SCCM2012) to update actual SCCM Client SP1
(5.00.7804.1000) to SP1 CU3 (5.00.7804.1400)?
Thank you.

I see in fodler with CU3 updates, are four packages:
- SP1 Cumulative update 3 - x64 client update
- SP1 Cumulative update 3 - x86 client update
- SP1 Cumulative update 3 - server update
- SP1 Cumulative update 3 - console update
It will be stupid but... maybe I should deploy x64 client update package?

Radeon Drivers problems with BootCamp Windows 2008 Server R2

Hello !! I have some troubles with BootCamp and Windows 2008 Server R2... I can't find any graphic drivers for my AMD Radeon HD 6490 !! Heeeelp please
(I Have a Macbook Pro i7)

Shoooryuken, did you ever get this problem resolved? I have thhe same issue...
I have the 2011 MacBook Pro 15" 2.0ghz Quad Core i7 with integrated Intel HD Graphics 3000 and AMD Radeon 6490M.
I just installed Windows Server 2008 R2 (Which is based on Windows 7) using Boot Camp. After I installed it, the I only have 3 resolution options, all of which are stretched. I checked the device manager and found that the Apple Instal DVD did not work and only a "Standard VGA Graphics Adapter" was installed. It also reports a whopping 16MB of graphics memory
I downloaded the "detect and install" driver utility from AMD (http://support.amd.com/us/gpudownload/Pages/index.aspx) and it detected my correct OS and downloaded something (driver maybe?). When I clicked install, I recieved this message: "AMD Catalyst Mobility cannot be downloaded due to incompatible hardware/software on your computer. Your computer does not contain a proper graphics adapter."
I don't really know why Windows does not detect the graphics card. Right now I am trying to install the Intel graphics drivers for the Intel HD 3000 integrated graphics... I will report back if I get the integrated graphics running...

How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
Farid

Hi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet

Error connecting to the SAP SRV on Windows 2008 Server platform

Hi All
We have a problem with one of our clients they bought a new sbs windows server 2008 and we loaded sql 2005 and sap b1 SP01 PL07.
When we did the SBO install we experience connection issues and we created odbc connection on the server using named pipes and tcp/ip (used both server name and Ip address).
We also configured the server in configuration manager and we managed to login and solved the slow system connection issue. We also created odbc connection on the client machines. (Machine are on a workgroup and users have administration access on all machines),we also installed native client on all machines.
After the first batch of client installs we managed to have connection, they were other computers which were left out during the first client install and now the client want to do the remaining machines connected to SBO. On every machine that we install now we get the same error :-
*Connection failed:
SQLState:'08001'
SQl Server error:10060
[Microsoft][SQL Native Client] TCP Provider: A connection attempt failed because the connected party didnot properly repsond after a period of time, or established connection failed because connected host has failed to respond.
Connectioin failed:
SQLState:'HYT00'
SQL Server Error:0
[Microsoft][SQL Native Client]Login timeout expired
Connection failed:
SQLState:'08001'
SQL Server Error: 10060
[Microsoft][SQL Native client] An error has occurred while establishing a connection to the server. When connecting to the sql server 2005, this failure may be cause by the that*
Please help as most user who need access can't login and they are the main users.
rgds,
Bongani Dlamini

Hi Eric,
yes we are using Windows 2008 SBS for the SAP EHP4 FOR SAP ERP 6.0/NW7.01 installation.
we tried to create the key but it says access is denied.
Actual thing is we got the server with Windows 2008 server 64 bit SBS (standard FE) with Domain Controller (DC) configuration.
We have removed the DC using dcpromo to convert into Wokgroup and tried the SAP installation.
I hope you got the idea and please let me know any further suggestions or it is the problem with the license.
Thanks & Regards,
Prabhu Reddy.

Upgrade of Integation Services (Windows 2012 R2) on Windows 2008 R2 with Exchange 2013 SP1 DAG fails

Here is the scenario:
Legacy Host: Windows 2008 R2
Guest VM: Windows 2008 R2 with Exchange 2013 SP1 DAG cluster.
After importing the VM (2008 R2 and Exchange 2013 DAG) into a 2012 R2 host (Cluster). (copy VM files to new 2012 R2host) Everything works fine.
Then upgrading "Installation Services" (for Windows 2012 R2 host) on the imported VM runs fine with no errors to the "Restart" prompt. VM than shows: "Configuring Windows updates 32% complete. Do not turn
of your computer." Hangs there for about 20 minutes until is says "shutting down". Hangs there for 20 minutes until power off. Restart to normal start; "Preparing to configure Windows. Do not turnoff your computer." proceeds slowly
to "Configuring Windows updates 32% complete. Do not turn of your computer." hangs there again indefinite. Sometime hangs at shutdown cycle and "Configuring Windows updates 32% complete. Do not turn of your computer." indefinitely.
I moved 20 other machines from a 2008 R2 host to new Windows 2012 R2 hosts all of these machines install the 2012 R2 Integration services just fine on the 2008 R2 VM. Just the 2008 R2 VMs clustered (DAG) and Exchange 2013 SP1 do not take the Integration
Services upgrade.
Any advise from Microsoft? I know I could decommission the DAG and Exchange machines and install Integration services on the native box before Exchange and DAG and that would sure work, but I'd rather avoid that amount of work for a simple integration layer
upgrade.
Thanks
Gerhard Waterkamp ACSLA Inc.

Hi,
Could you try use the following method to fix this issue first?
1. Run the System Update Readiness Tool, then check if there is any error in the Checksur.log and checksur.persist.log.
1. Please run the System Update Readiness Tool on this affected server. Please download this tool from the following Microsoft article:
Description of the System Update Readiness Tool for Windows Vista, for Windows Server 2008, and for Windows 7
http://support.microsoft.com/kb/947821/en-us
2. The System Update Readiness Tool creates the log files that captures any issues that the tool found or fixed. The log files are located at the following location:
%SYSTEMROOT%\Logs\CBS\
3. Please paste the checksur.log here for analysis.
If there is no error found, please try the following step.
==================================
2. Use Fix it tool to reset the Windows Update components.
1. Open the following link.
http://support.microsoft.com/kb/971058/en-nz
2. Select Windows 8.1, Windows 8 and Windows 7 in the product selection box.
3. Click “Run Now” to reset the Windows Update components.
Note: We can reset the Windows Updates manually by following the steps in the KB above.
3. Use the System File Checker tool to repair missing or corrupted system files
1. Open the command promote with Administrators.
2. At the command prompt, type the following command, and then press ENTER:
sfc /scannow
Any errors are found in the steps above, please let me know.
Hope this helpful.
Best Regards,
Jason Zeng
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Cant add a printer in Windows 2008 Server printer server HP LaserJet P1606dn

Hello,
I am trying to install a HP LaserJet P1606dn printer in a Windows 2008 Server Virtual machine.
The printer is connected to the corporate network and I am able to do ping from my desktop to the printer.
Then I follow this steps.
1.- Install the driver application for W2008 Server.
2.- Add printer in W2008 Printer Server.
3.-Select "add a local or network printer" as an administrator.
4.- Choose network printer
5.-Create a new port --> Standard TCP/IP Port
6.- Fill the host name ---> ("printer1") or IP address --> (XX.XXX.XX.13) I have tried the both options separately but with no result. And fill the port name
7.-At this stage . W2008 Server tells me that " the device is not found on the network" . Be sure that: .....
So, in select device type, I select "Standard" and "Generic Network Card" and click on Next
8.- Install printer driver -> I select the proper driver HP LaserJet 1606dn
9.- Install the printer driver ---> use the driver that is currently installed (recommend)
10.- Type printer name --> "printer1"
11.-Share printer name ---> "printer1"
Here, begins the problem. Trying to print a test page, It says me that "A test page has been sent to your printer", I can see the document in the queue, but the printer page it isn`t thrown away outside.
I dont explain myself why, I have done several trials, and I dont know what happens
I would be very grateful if somebody could help me to solve this issue
Many Thanks
Robert

Hi lespaul80,
1st- check if you can connect to your printer on web interface(in IE: \\printer ip address
and check under network setup if subnet mask and def. gateway setup
also if you have DNS setup check it too
check if you have SNMP options - desable it
on server try ad printer by direct IP and try use upd drive(PCL6 or PS)
Hope it help you
Regards,
I am an HP employee.
*Say thanks by clicking the "Kudos! Star" which is on the left*
*Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.*

Windows 2008 server

has any one manged to get Windows 2008 server working with fully driver support on a MacBook (Black)

Not in bootcamp, VMWare Fusion 2.0 Beta has support for it.

Windows 2008 Server crashed - How to find location of remote shared files that they used to access on remote web app?

We have a client that was running windows 2008 server. A previous IT person had setup their system, so we were walking into a situation where there were many unknowns. Server was mainly handling emails only, and we were able to get their exchange
database off and export PSTs to hosted exchange via microsoft.
Everything went fine with that, however one user said that he used to access files on the server via the remote web app as he described. He would go to the following url:
https://mail.theirdomain.com/remote/menu.aspx#
and he would use his login and then he would see several links to folders. He could then click on those and see his desired files.
We were able to get the server booted again, however we could not find any of the files he described on it at all, leaving me to suspect that perhaps this remote link was accessing another PC.
We have the old server up and running, however the link above is no longer active because we have pointed the domain to the new hosted exchange server. As I am still learning and my boss wanted me to research this on my own and figure out how to find
out where these files are located. Any advice would be greatly appreciated.
Just as a note I did try access mail.localhost.com/remote/menu.aspx# on the server but this did not work. Is there any way in the IIS 7 management console to figure out where this was pointing to?

I figured it out - The server was using sharepoint to host these files. I browsed localhost:987 and opened the sharepoint site locally on the server. They had several documents to be exported, however when clicking on Open in Explorer it was
giving an error that local client was not configured. I installed Desktop Experience and after that was able to open it in Windows Explorer and copy all files off.

Windows 2008 server with a Z77A-GD65 m/b?

Similar Messages

Maybe you are looking for