Windows 2008 Standard 32bits PAE

Hi All. I am trying to turn on PAE on windows 2008 Standard 32bits.
i use bcdedit /set pae forceenable
to enable.
however after restart.
Still can't see 4GB memory on task manager.
ESX host has already add 4GB to that guest. .........Any idea..

Hi,
For windows 32 bit standard memory limit is 4 G. So you cannot enable PAE or it wont have any affect on 32 bit standard windows server.
Read
http://msdn.microsoft.com/en-gb/library/windows/desktop/aa366778(v=vs.85).aspx#physical_memory_limits_windows_server_2008
To enable PAE you must have capable version of windows. By capable I mean which can see more than 4 G of memory
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Similar Messages

Oracle 11g ODAC 11.1.0.6.21 on Windows 2008 Standard server gives TNS error

Hi,
I have Oracle 11g ODAC 11.1.0.6.21 installed on my Application server that has 32 bit Windows 2008 Standard. The Oracle database 10g is installed on another 2008 server. On database server I can connect using SQLPlus. But on application server I cannot connect using ODAC SQLPlus. I have given correct service name in tnsnames.ora file.
Error is ORA-12154 TNS: Listener cannot resolve service name
What's wrong? Is 11.1.0.6.21 not meant for Windows 2008? I did not get any errors while installing.
This 11.1.0.6.21 works perfectly for me on XP machine.
I have browsed this forum but not getting clear steps to peform.
Can someone guide me what is needed?
Thanks
Shrini

Hi,
The request to connect from the client is reaching the server but it seems the parsing of the service name is either wrong or the information is correct. Here are a couple of suggestions.
If you have a good known set of sqlnet.ora and tnsnames.ora files on another client where the same connection descriptor works, then backup the curreny client network config files and copy the good known files to the Windows 2008 web server where you see the error. Make sure you recycle the worker processes once the files have been copied.
Try to connect via Ezconnect and by pass the config files to see if you get the same error.
//hostname:port/servicenameofdb
where hostname is the machine where the target database is running
port is the port on the DB machine where the tns listener is running and listening
service name is the service name of the target DB
Use this syntax in the connect string box when attempting to connect from SQL PLUS out of the ODAC home.
You can also run lsnrctl utility on the server and vertify there is a handler for the service name or instance that is the target,
HTH
Jenny B.

Windows 2008 Standard SP1 will Support MS SQL Server 2008R2 Enterprise Edition ?

Dear ,
Currently we are running MSSQL Server Enterprise 2008 Edition on Windows 2008 Standard Edition 64Bit (.Net 3.0). Now we are upgrading the MSSQL Server to 2008R2 Enterprise with SP2. Will it support to upgrade on the same OS or do we need still upgrade
OS also to Windows 2008 R2?
1. Do we need to upgrade OS from 2008 to 2008R2 Sp2.?
2. MSSQL 2008/2008R2 Enterprise on Windows Standard is compatible ?
Need your help on above details.
Thanks

Hello
Check support matrix:
https://msdn.microsoft.com/en-us/library/ms143506%28v=sql.105%29.aspx#EEx64
need only sp2 if not have to OS.
and check your sql version upgrade path:
https://msdn.microsoft.com/en-us/library/ms143393%28v=sql.105%29.aspx
sorry my english

Ktpass command in windows 2008 standard server

Hi all,
now I need to configure ADsso. can anyone check the ktpass command and suggest me it is correct or not?
environment is here..
Number of DCs              = 3
OS of DCs                    =   windows 2008 standard (SP2)
AD domain functionality =    Mixed mode with 2003
Domain name                = laxman.com
Domain user name        = ssouser
KTpass.exe version       = 6.0.6003.28006
Command is here
=================
1. ktpass –princ ssouser/[email protected] -mapuser ssouser -pass password123 -out c:\output.keytab –ptype KRB 5_NT_PRINCIPAL +DesOnly
2. ktpass –princ ssouser/[email protected] -mapuser ssouser -pass password123 -out c:\output.keytab –ptype KRB5_NT_PRINCIPAL
+DesOnly
3. ktpass –princ ssouser/[email protected] -mapuser ssouser -pass password123 -out c:\output.keytab –ptype KRB5_NT_PRINCIPAL
+DesOnly
Thank you

Hello,
I've been working on this a simillar case since a month!!
I don't want you to wate your time!
AD2008 Standard is not supported.....this is it!!
http://www.cisco.com/en/US/docs/security/nac/appliance/support_guide/agntsprt.html#wp103186
Cisco said it is not tested for 2008 standard, but beleive me, with this TAC case opened for a month, and no answer from the development team till now! You better try 2008 Enterprise.
I tried AD2008 Enterprise R2, and it works like magic!
Hope this will help.
Have a lovely day

Installing Oracle 11.2.0.2 64-bit on Windows 2008 standard 64-bit

Getting an architecture error during the prerequisite checks:
Architecture - This is a prerequisite condition to test whether the system has a certified architecture.
Expected Value
: 64-bit
Actual Value
: 32-bit
List of errors:
PRVF-7535 : Proper architecture is not found on node "WS8-DBATEST" [Expected = "64-bit" ; Found = "32-bit"] - Cause: System architecture does not meet the requirement. - Action: Ensure that the correct software bundle is being used.
This is in a VM test environment as we prepare to move to 64-bit. The server is windows 2008 standard and the processor is AMD64 Family 16 Model 9. I have verified the OS is 64 bit by running Winver and verified the CPU is 64bit by running systeminfo. What am I missing?

Is this still a bug? I am encountering this now. Windows server 2008 Standard R2 64 bit.
I need both 32 bit client and 64 bit client for EPM 11.1.2.2 and the order mentioned in that documentation is
first 32 bit and then 64 bit. Is there a fix for this ?

Windows 2008 standard hangs during chkdsk

I have a file share server running windows 2008 standard edition. It is connected to a SAN via Fiber channel. There are 4 volumes presented to the Server via the SAN. After a critical error occured, I restarted the server and the OS requested
that I run chkdsk on the SAN volumes. I allowed it to run. It quickly got to the indexs, but then got hung at about 49% in stage 2. After letting it set for several hours, I was forced to hard boot. Upon restart, I did not allow the
chkdsk to run as this is a production server. The server booted up with no issues and all of the data was intact. I recently migrated the data via Thin Import to a new SAN. All of my data now resides on a brand new set of discs in my compellent
array. To save down time, I presented the volumes to the server using the same drive letters. The server immediatly asks to run chkdsk on these volumes. I run chkdsk and it still hangs in the same spot on the indexes. I've made snapshots
of the volumes and presented those to another server. After running a rescan in disk managment, that server requests a scan and fix. I let that run and it completes. I'm at a loss on how to correct this issue. The data seems fine, but
chkdsk will not complete.

Hi,
Stage 2: Chkdsk checks the directories in the volume. Based on your description, please use
chkdsk /x command to force the volume to dismount. Then check if you can execute the process of chkdsk successfully.
Meanwhile, please go to Event Viewer and check if you can find some related errors.
Hope this helps.
Best regards,
Justin Gu

Default OS performance counters processor, memory, logincal disk are missing in windows 2008 standard server

I have a windows 2008 standard server in which the default OS performance counters counters processor, memory, logincal disk are missing.
I tried using exctrlst.exe tool. This tool shows that the respective performance counters are already enabled but when I check in perfmon.msc, these counters are not visible.
I also tried to rebuild the performance counters from the OS disk. but it did not worked. still the counters are missing.
Because of these counters are missing, am unable to monitor the utilization of CPU, memory and disks.
any suggestions, workaround, recommendations or solutions. it will be more helpful and highly appreciated !!!!.
Regards,
GK.
GK

Hi GK,
According to your description, it seems that the issue was the same as the one described in the article below. If you are running Windows Server 2008 64-bit, you can check the KB below:
http://support.microsoft.com/en-us/kb/2554336
In addition, the articles below would also be helpful to you:
How to manually rebuild Performance Counter Library values
Missing Performance Counters
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

8 vcpu for Windows 2008 Standard Edition Guest

Hi,
Due to a software requirement, I'm investigating the possibility of creating an 8 vcpu Windows 2008 Standard Edition 64-bit guest.
In Vsphere, its possible to create an 8 vcpu windows 2008 Standard Edition guest by configuring the "cpuid.coresPerSocket" parameter to 2, which allows the Standard Edition windows license to see 8 cores without violating the standard licensing which caps it at 4 processors.
Is there a similar functionality in Oracle VM Server?
Thanks.
Terence
Edited by: 835043 on 8/02/2011 19:53

Hi Simon,
Read that link you sent and I believe it allows us to play around with cpu cores in Windows Standard Editions in virtual environments.
"Software run in a virtual OSE is licensed based on the number of virtual processors used by that virtual OSE. If the physical processors in the server have two cores, each virtual processor also has two cores from a licensing perspective."
So its up to us to configure the cores as it defaults to single core for each vcpu.
I've tested in vsphere using 4 vcpus and setting it for 2 cores each. The OS sees only 2 processors but I've got 4 threads in task manager. If I revert to 4 single core vcpus, the OS sees 4 processors.
I'm trying to see if I can do the same in Oracle VM and am trying to understand the cpuid setting in the vm.cfg. The examples given in xmexample.hvm-stubdom are for Intel 8 core and AMD 5 core but all I have is AMD dual core.
So trying to figure out how to set it correctly in my situation. Haven't found any detailed documentation for configuring those ebx, ecx, edx settings.

Windows 2008 standard Server, Bits installed failed.

During installation of the following things in Run command as
Windows Update has encountered an error and cannot display the requested page" when you try to install an update.
We are trying to add the Automatic updates service and Background Intelligent Transfer Service does not appear in the
service list.
%windir%\System32\rundll32.exe setupapi,InstallHinfSection DefaultInstall 132 %windir%\inf\au.inf
%windir%\System32\rundll32.exe setupapi,InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf
an ERROR INSTALLATION FAILED Occured.
you can called me on 9122-24360089 if clarification you want.
Thanks & Regards,
R.N.Sawant
PRECISION WIRES INDIA LTD.

I'm unable to update windows update on windows server 2008 standard edition with service pack2.
Also Automatic updates service and Background Intelligent Transfer Service does not appear in the service list, so I try to run the following command in run box to
get the Automatic updates service back to list.
%windir%\System32\rundll32.exe
setupapi,InstallHinfSection DefaultInstall 132 %windir%\inf\au.inf
Prompt "installation failed" occured.
Also when I ran Windows6.0-KB947821-v33-x64, got an error as
Installer encounter an error : 0x80070424
The specified service does not exist as an installed service.
Regards,
R.N.Sawant

Migration of windows 2008 std 32bit DC to windows 2012 std

i have 32bit DC in my local environment having schema ver 44.. now i hav another server and want to migrate to windows 2012 std edition.. can some one guide me how to achieve this task?

Hi Babarmunir,
In-place upgrades from 32-bit to 64-bit architectures are not supported. All editions of Windows Server 2012 are 64-bit only.
Domain controllers that run 64-bit versions of Windows Server 2008 or Windows Server 2008 R2 can be upgraded to Windows Server 2012. You cannot upgrade domain controllers that run Windows Server 2003 or 32-bit versions of Windows Server 2008. To replace
them, install domain controllers that run a later version of Windows Server in the domain, and then remove the domain controllers that Windows Server 2003.
Hence you need to have a fresh x64 machine which you can join to domain and install ADDS Role then promote as additional domain controller.
Provided the Forest Functional Level is Windows Server 2003 at minimum.
Upgrading previous retail versions of Windows Server to Windows Server 2012:
http://technet.microsoft.com/en-in/library/jj574204.aspx
Upgrade Domain Controllers to Windows Server 2012 R2 and Windows Server 2012
Use the below guide to setup the ADC:
Step-By-Step: Adding a Windows Server 2012 Domain Controller
System requirements for Windows Server 2012 are unchanged from Windows Server 2008 R2. For more information, seeWindows Server 2008 R2 with SP1 System Requirements (http://www.microsoft.com/windowsserver2008/en/us/system-requirements.aspx).
The Schema and Domain preparation: One could run
Adprep prior to ADDS Role installation, Regardless, if Adprep is not detected, it will automatically be completed on your behalf.
Regards,
Satyajit
Please“Vote As Helpful”
if you find my contribution useful or “MarkAs Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

Windows 2008 Standard SP2 inplace upgrade to Windows Server 2008 R2 Standard SP1 failing

Hi All,
I'm encountering an issue with performing an in-place upgrade of Windows Server 2008 SP2 to Windows Server 2008 R2 SP1.
Server details:
Virtual machine running on VMware ESXi 5.
Uninstalled AV and backup software
Domain controller also running AD Certificate Services#
UAC disabled
Running setup as a domain admin
When launching setup, the process completes "Copying Windows Files". After a few seconds or being on "Gathering files, settings and programs 0%", an error appears on screen -
Windows installation encountered an unexpected error. Verify that the installation sources are accessible, and restart the installation.
Error code: 0xC0000005
Errors and information up to the fatal errors in the setupact.log setup summary:
2013-04-28 19:26:35, Info MIG Loading replacement manifest data for Microsoft-Windows-WMI-Core
2013-04-28 19:26:35, Info MIG Loading replacement manifest data for Microsoft-Windows-WSRM-Service
2013-04-28 19:26:35, Info [0x080841] MIG UPGCSIAgent: Enumerating installed manifest source using C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6\wcp.dll
2013-04-28 19:26:35, Warning [0x080405] MIG EnablePrivilege: AdjustTokenPrivileges failed (Error:0x514)
2013-04-28 19:26:35, Info CSI 00000001@2013/4/28:18:26:35.866 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x7feeff78c85 @0x7fef1646a4e @0x7fef1646676 @0x7fef1647a53 @0x7fef164c291
@0x7feedd728ba)
2013-04-28 19:26:35, FatalError [0x090001] PANTHR Exception (code 0xC0000005: ACCESS_VIOLATION) occurred at 0x000007FEF00498CF in C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6\wcp.dll (+00000000001498CF).
Minidump attached (107516 bytes).
2013-04-28 19:26:36, FatalError [0x090001] PANTHR Exception (code 0xC0000005: ACCESS_VIOLATION) occurred at 0x000007FEF00498CF in C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6\wcp.dll (+00000000001498CF).
Minidump attached (107788 bytes).
The diagerr.xml has the two minidumps but they are just encoded straight into the xml file. Thanks for any assistance. /Ashley

Hi,
Generally such kind of issues are caused by third party programs such as CD burning programs, device driver etc.
First please refer to this article to see if there is anything helpful:
Guide for Upgrading to Windows Server 2008 R2
http://technet.microsoft.com/en-us/library/ff972408(v=ws.10).aspx
Meanwhile from the description, it mentioned a file under C:\Windows\winsxs. Check the permission of the folder amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6 and the file wcp.dll to see if the permission
and ownership are correct compare with the other folders.
Also as it provided 2 minidump files, you will need to use WinDBG to read the minidump files and see if there is any further information.
http://support.microsoft.com/kb/315263
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

Uninstall TS Device CALS - Windows 2008 Standard Edition

Hi,
Please help me to Uninstall Terminal Server Device CALS.
I have 25 Remote Desktop Services Device CAL but at time of activation; by mistake i Installed 30 and 25 Licenses accordingly. So i want to reset this license
database and re-install /activate the same as my license agreement.

Hi,
You need to contact the Clearinghouse with your license agreement numbers, etc. again and explain to them that the licenses were installed as Per Device and you need
re- install /activate. They will help you install them again as Per Device.
The article below can help you find their phone number (it is for windows 2000, but is still relevant, just substitute "Remote Desktop Licensing" when it mentions
"Terminal Services Licensing".)
HOW TO: Locate a Phone Number for the Microsoft Clearinghouse
http://support.microsoft.com/kb/291795
You can also revoke Client Access Licenses (CALs) manually.
Please refer to the following article for detail:
http://blogs.msdn.com/b/rds/archive/2008/02/15/manual-revocation-of-client-access-licenses-cals.aspx
More information:
Configure the Terminal Server Licensing mode
http://technet.microsoft.com/en-us/library/cc786109(WS.10).aspx
Technology changes life……

Windows Server 2008 Standard 64Bit

We need Windows 2008 Standard 64 bit.
So please convert Windows 2008 Standard 32bit to Windows 2008 Standard 64bit.
Please send me the link of Windows 2008 Standard 64Bit ISO Image File
Regards
Sandeep Sahadevan

Media is not free. If you have a regular Microsoft reseller with whom you deal, you should contact them in order to purchase the media. Otherwise, you can contact Microsoft. This forum is not an official way to contact Microsoft.
At the bottom of this page you will see a Contact Us link. Follow that to contact Microsoft to see how you can obtain a copy of the distribution.
If you have a volume license agreement (any organization buying as few as five licenses from Microsoft should have such an agreement because that is when discounts start), then you can download it from the volume licensing site - you need credentials from
your license agreement.
. : | : . : | : . tim

Windows 2008 Server Standard - Problems Printing

I have an issue with a server that we are currently setting up in a bus station.
There are 6 machines in total, one is the server which is running Windows Server 2008 Standard 32bit SP2, the other 5 are the client machines which are all running Windows 7 Pro 64bit SP1.
All 6 machines are all linked together on the same domain and they all speak to each other, i.e all ping each other.
The issue we now have is that we have 5 printers to link to the network, all the prints are plugged directly into the Ethernet sockets on the wall which then go to the switch. The prints all have ips assigned to them and the server will see them but will
not communicate with them. If we try to ping any of the printers it fails.
We have loaded print service/print management on the server and we can set up the printers through that. Again we get the error that it is not communicating with the printer so it asks you to load the driver manually(gives us a huge lists of makes and models).
In the network list through control panel we dont get a list of printers.
If anyone can help that would be great and could let us know what we are doing wrong.
If i have missed anything important out please let me know.
thanks

Until you determine the underlying network transport problem this has nothing to do with printing.
Get the network configured so you can ping or use tracert to the IP of the device. It's possible the printers are not properly configured for your network but once again not a printing issue at this point but a networking issue.
Alan Morris Windows Printing Team

Windows 2008 Licensing - Standard and Enterprise Edt - No of License required

Hello All ,
We have a Windows Environment running on VMware (ESXi5.1), running Windows 2008 Standard and Enterprise platforms . We are working on the no of license that is required for each category . Can you help us in licencing calculation for each environment
.Below is the split
Windows 2008 R2 Standard Edt.
ESX Cluster 1
Total No of ESX Hosts :4
Total No of Windows 2008 R2 Std Edt VMs : 9 // How many license req ? Calculation
Total No of Windows 2008 R2 Ent Edt VMs : 6 // How many license req ? Calculation
ESX Cluster 2
Total no of ESX Hosts : 3
Total No of Windows 2008 R2 Std Edt VMs : 13 // How many license req ? Calculation
Total No of Windows 2008 R2 Ent Edt VMs : 6 // How many license req ? Calculation
Appreciate your support

Hi Sathish,
I would recommend you to contact the Microsoft Volume Licensing Service Center at the following
Microsoft website. They are the experts and can guide you with the proper license requirments.
https://www.microsoft.com/licensing/servicecenter/
Find your local Volume Licensing Service Center support contact information below. Select your country from the drop-down list and the correct Support Center will
be displayed at right.
https://www.microsoft.com/licensing/servicecenter/Help/Contact.aspx
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Windows 2008 Standard 32bits PAE

Similar Messages

Maybe you are looking for