Windows 2008R2 OEM compatibility

Hi there,
After finally getting MSA Storage and VMware installed, now looking to setup my VM's.
I have 2008R2 OEM licences as purchased with my HP DL380G6 Host Server.
Do these work with VMware and what are my options if they don't?!
Cheers,
Matt

Windows OS license are always for physical server.
You can use OEM license, but this will cover only the first istance(s).
For example if you have a Standard OEM, then only the first VM.
If you have the the Enterprise OEM, only the first 4.
To have more you must use the Datacenter (OEM or not) or buy other non OEM licenses.
Note that, if you have vMotion or HA, each node must have the licenses for the max number of VMs.
This does not only apply to VMware but for every hypervisor (see Microsoft site for more info).
Andre

Similar Messages

SAP GUI Compatibility issue with Windows 2008R2 64 Bit

Hi Gurus
Is anyone experienced connectivity issue with SAP GUI (32bit) on Windows 2008R2 64bit? Except base version of 7.3 every Service Pack failing
to connect, Strange thing was it was working with SP5 in WINDOWS 7 64bit.
Your inputs greatly appreciated.
-giri

Hi Giri
Yes, You can do the normal installation on windows 2008 / 2008 R2 systems. we are using in our environment. is this any error message while installation or SAPGUI execution time?
Refer the SAP Note 66971 - Supported SAP GUI platforms
BR
SS

How to Delete Non-System State Backups in Windows 2008R2

Hello,
I am running a Windows 2008R2 server which uses Windows Server Backup to do the backups. We are using the backup-tool to create non-system state backups of the data-directories on this machine. The backup is done on a dedicated disk connected through iscsi
(to a Synology box). This backup disk has become too small and we have now replaced the Synology box with a bigger one. Here i created a new LUN again for the backup purposes.
Now for my question; The wbadmin.exe tool supplied with W2008R2 does not offer a way to delete the old backups. I know that in Win2012 (which we we also have running) I could add the new iscsi location and then (when enough backups are available on the new
target) use wbadmin.exe delete backup to delete the old non-system state backups; e.g.
wbadmin delete backup -version:08/07/2013-21:00
This (very undocumented) feature of Windows 2012 and higher works quite nice and is exactly what i am searching for on the W2008R2 machine; a way to delete the old backups (and under the hood delete the corresponding snapshots)
I've done quite a bit of research and it should be possible to do something similar in 2008 but then manually, The howto is described in the following link: http://blogs.technet.com/b/filecab/archive/2009/06/22/backup-version-and-space-management-in-windows-server-backup.aspx .
Basically it describes that you should use DiskShadow.exe to remove e.g. the oldest snapshot with a command like :
Delete shadows OLDEST \\?\Volume{7fc1871b-2e1f-11dd-a339-001e4fb7af35}
Windows Server backup (wbadmin) should then on the next run 'see' this deletion and update its list of available backups:
"You can perform the same steps manually to delete backups on demand. However, the backup catalog update cannot be done manually and it will happen instead during
the next backup."
I've done this on our box and it indeed removes the shadows from the list. However, in the Windows Backup 'dashboard' it still lists the backups as available. Also after a new backup has finished (according the the article this is when it should 'update'
its backup catalog). When I try to restore a backup from a date that i just removed it gives a nice message that this is impossible because the snapshot is not available (duh :)) ;
Unable to browse Local disk. The shadow copy of the backup stored on the backup destination cannot be found.
So it seems that the aforementioned method works; it removes the snapshot and frees diskspace, but it doesn't update the Windows Backup catalog. As a result the management tool (GUI) still lists the backups which are no longer available! How can i change
this? Is there any way to do this? I found one article which mentions that the Dashboard bases its screen on the Windows Logs and not on the actual VSS snapshots available:
http://forum.wegotserved.com/index.php/topic/23757-start-afresh-with-server-backup/ (WHS) In my situation however this seems unlikely because i don't have any logs that date back as far as my backups go.
In my opinion this is a real bug and it leaves us with a in-consequent backup schema. Does anyone have similar situations or even a solution to my problem?
Kind Regard, Martin

Hi Mandy,
Yes! I think i got my answer and I now get how windows backup works in Windows 2008 :-) It turns out that I dismissed some suggestions a bit too soon. The answer lies in the command mentioned earlier :
Wbadmin delete catalog
This command does delete all the backups from a perspective of the Windows Backup UI, but leaves the VSS snapshots intact. This means that the backups are still available, but you just can't restore them with the User Interface. In order to 'update' the
UI with the current available snapshots (which you can list with diskshadows list shadows all), you have to re-add the existing media on which the backups took place using the Wizard of the UI. It will then inform you that existing backups are available and
if you want to keep these for restore purposes. If you click 'yes', and THEN perform a backup ... All the current available backups will be shown in the User Interface :-)
So for my steps taken to change from one iscsi (iscsi1) to another (iscsi2):
- Add the 2nd iscsi target with the Windows Backup UI
using Backup schedule , Modify backup -> [desired options] => Add more backup destinations -> iscsi2
- Remove the 1st iscsi target with the Windows Backup UI
using Backup schedule , Modify backup -> [desired options] => Remove current backup destinations -> iscsi1
- Run some backups on the new destination. Old restore points are now still available. When enough restore points are available on the new volume iscsi2 start deleting old data from iscsi1 as follows:
- Run diskshadow
diskshadow
- list all the current snapshots
list shadows all
- remove all the snapshots of iscsi1 (repeat until all shadows are gone of iscsi1)
delete shadows oldest \\?\volume{yourvolumeid}\
- delete the windows backup catalog
wbadmin delete catalog
- Restart the windows backup UI and re-add your schedule on the new volume iscsi2. It will now ask if you want the keep the existing data for restore purposes; click yes.
- After the next backup only the backups of volume iscsi2 will be listed and everything is fine !
I Hope my post will help others with similar questions. It was quite a search before I understood the way it works. Basically as long as your VSS snapshots are still available and listed by diskshadow you still have the backups and you will be able to get
this in sync with the steps above (delete schedule and re-add originating targets containing the snapshots). After the next backup the UI will update itself.
(In my case someway along the way I lost my originating snapshots, but because I already had my new backup set it didn't bother me; It kept me from having to delete all 510 old backups :) with diskshadow)
Regard, Martin

SSRS 2012 SP2 - Windows 2008R2 - Microsoft.ReportingServices.ReportProcessing.RenderingObjectModelException: A generic error occurred in GDI+

Hi,
I have built new SQL 2012 SSRS SP2 with Windows 2008R2 and BAR reports are not showing (just "x" mark in the left corner).
Following is the log file information. I have gone through other forums and all are with windows 8 or windows 2012. Your help is much appreciated.
library!ReportServer_0-15!d7c!08/13/2014-10:52:17:: i INFO: RenderForNewSession('/ProductionReporting/PlantProduction')
reportrendering!ReportServer_0-15!d7c!08/13/2014-10:52:18:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.RenderingObjectModelException: , Microsoft.ReportingServices.ReportProcessing.RenderingObjectModelException: A generic error occurred
in GDI+. ---> System.Runtime.InteropServices.ExternalException: A generic error occurred in GDI+.
   at System.Drawing.Image.Save(Stream stream, ImageCodecInfo encoder, EncoderParameters encoderParams)
   at Microsoft.Reporting.Chart.WebForms.Chart.Save(Stream imageStream, ChartImageFormat format)
   at Microsoft.ReportingServices.OnDemandReportRendering.ChartMapper.GetImage(ImageType imageType)
   --- End of inner exception stack trace ---;
Thanks,
Vel
Vel Thavasi

Hi Vel,
According to the error message, the issue is related to GDI+. Based on my research, it is a known issue that the GDI+ need to be updated on Windows Server 2008 R2. If we want to know what version of GDI+, we can do a file search for Gdiplus.dll.
To fix this issue, please install the hotfix for your Windows Server 2008 R2 from the following kb:
http://support.microsoft.com/kb/2495074
There following thread about the similar issue is for your reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/50c071db-b4fc-4a2e-a9f4-e10e833c97d2/report-not-rendering-charts-in-pdf-a-generic-error-occurred-in-gdi?forum=sqlreportingservices
If there are any other questions, please let me know freely.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Intel processor bug causes Windows 2008r2 guest to blue screen

We recently purchased several B200-M3 blades with E5-2680v2 processors. Our UCS infrastructure and blade firmware is at 2.2(1d). ESXi hosts are at 5.5u1.
From my reading of the Release Notes, this makes the new blades vulnerable to Caveat CSCuo30572 which is a bug in the v2 processors that can cause Windows 2008R2 guests to blue screen.
VMware KB2073791 also deals with this bug
The Intel Erratum is C135
Updating the firmware (2.2(1d) probably to fixed version 2.2(3d)) is a relatively long process in our environment.
Has anyone experienced this bug? Do the guests blue screen at any particular time; e.g. when booting? Are Windows 2012 guests impacted? One of our new v2 blades was running Windows 2008R2 guests for about a week without any known problem. It has since been taken out of production.
The Release Notes (2.2) description for CSCuo30572 is: "Intel v2 processors no longer cause PSOD with Microsoft Windows 2008 R2 VM guests." Should the PSOD (ESXi crash) actually be BSOD (Microsoft crash)? Or can ESXi purple screens be caused also, crashing the entire host?
The Release Notes also indicate that the Caveat is resolved in release 2.2(2c)A. Does the A indicate that an Infrastructure update is all that is needed? That does not seem like it would supply the fixed microcode to the processors via BIOS.
I'm basically looking for some insight before proceeding with another FW update. Thank you.

Yes, it refers to Infrastructure (UCS Manager, FI and IOM). You could just upgrade the infrastructure to 2.2.3d and leave your Servers at 2.2.1d
Table 2 Mixed Cisco UCS Releases Supported
of the release notes.
CSCuo30572
Intel v2 processors no longer cause PSOD with Microsoft Windows 2008 R2 VM guests.
2.1(3a)A
2.2(2c)A

Trying to install Acrobat Pro XI on Windows 2008R2 VM

Our desktop guys ordered Acrobat Pro XI for some 32-bit Windows 7 VM's.
We also have some server applications running 64-bit Windows 2008R2 that need it and I'm attempting to create a silent install for. I used the customization wizard provided by Adobe and when I attempt to run the command line msi installation, my 64-bit Windows 2008R2 VM blue screens and reboots.
After I bring the VM back up and attempt to run Acrobat, I get the error message "Please uninstall and reinstall the product .. . . Error 1". Not real informative, so not sure where to go from here.
The desktop guys sent me the media and gave me a license key.
Question 1: Do I need a 64-bit version of Acrobat Pro?
Question 2: Will a desktop license suffice on a server?
Question 3: I have 7 servers that require this installation, do I need a different key for each?
Question 4: Do I really need to license each one via the internet?
Please help!!
Thanks
Mike

You actually need more answers than you asking for. . . . That is to say you should start with the Admin Guide: Acrobat-Reader Enterprise Toolkit Home.
You probably need a volume license. Read up on the server doc, look up the right EULA for virtualized environments, and read the section on granting offline exceptions/serialization/installation. Check out the Wizard Guide as well.
Error 1 doesn't sound like an Acrobat error, but it could be. Make sure you have a clean uninstall before retrying. There's a cleaner tool on LABs.
32 Bit is ok.
Ben
Question 1: Do I need a 64-bit version of Acrobat Pro?
Question 2: Will a desktop license suffice on a server?
Question 3: I have 7 servers that require this installation, do I need a different key for each?
Question 4: Do I really need to license each one via the internet?

Installing Windows 7 OEM on Maverick

Apple Store advised me to get a Windows 7 OEM 64 bit disc for my 2013 macbook pro:
http://www.amazon.com/Windows-Premium-System-Builder-Packaging/dp/B00H09BB16/ref =sr_1_1?s=software&ie=UTF8&qid=1393131478&sr=1-1&keywords=windows+7 . This is a generic OEM (not Dell, etc.)
I am using bootcamp, yet it won't install, and I end up with a black screen saying "No hardware detected."
An apple-care advisor later told me that bootcamp doesn't support OEM's at all.
But I have read of people installing Windows 7 on bootcamp using OEM disks throughout the Apple Forums.
There is also good feedback on installing Windows 7 on parallels, but I plan to use Windows for heavy gaming and game design, and I was advised against parallels for this purpose.
I'd love some feedback and advice on how best to install Windows 7.

Apple’s Genius Bar looked at the computer and the Bootcamp partition and said it was a Microsoft issue—and to call their customer support. Apple, after endorsing the Bootcamp and Windows 7 option enthusiastically is now saying, that it’s a 50-50 proposition that Windows works on Maverick and MacBook.
Microsoft says it’s a Bootcamp problem.
When I try to repartition with Bootcamp, it's saying there is no driver.
Anyone want to weigh in?
Is it merely a dud disk (that we paid full price for on Amazon—that is not a bootleg of any sort?
Is it worth investing in another disk?

Exchange 2007 on Windows 2008R2 with Windows 2012 DC

Hi All,
I am going to update DC from Windows 2003 Sp2 to Windows 2012 R2 (Add a new Windows 2012 DC at first and turn off Windows 2003 DC after). Just think about our Exchange server, which is Exchange 2007 SP3 (08.03.0297.001) on Windows 2008R2 SP1. Do I need
update Exchange to 2010 or I can keep it as is?
Thanks,

What service pack, what rollup?
With SP3, RU13, you should be OK for the domain controller itself:
http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
However...
The domain / forest functional level cannot be at Windows 2012 R2.
Maybe that will be supported in a future rollup (?).
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Failover Cluster Core Resources question on a Windows 2008R2 three node cluster

We have a three node Windows 2008R2 cluster with SQL Server 2008 R2 as a clustered resource. There are three resource groups in this cluster 1) Available Storage 2) Cluster Group 3) SQL Server. The Available Storage and SQL Server resource groups
reside on one node while the Cluster Group resides on another. The only resources residing in the Cluster Resource Group is the Cluster name and IP. I'd like to failover the Cluster Resource Group to be on the same node as everything else.
I'm not sure what the implications are on doing this. Failing over the Cluster Group shouldn't have any impact on the SQL Server Resource Group correct or would there be an interruption to SQL because of the failover of the Cluster Group. It's
an critical application of which I'm trying to gather some information for a change request and I know I'm going to be asked if this impacts the production database and everybody using it.
Thanks
RG

No, that should not impact anything. The cluster group is completely separate from the SQL group.
. : | : . : | : . tim

Where is Oracle 64 bit 11gR1 11.1.0.7 clusterware on windows 2008r2?

I am confused on something. I am trying to test Oracle 64 bit 11gR1 11.1.0.7 clusterware on windows 2008r2.
I am following Reall application cluster guide for 11g Release 1.
I downloaded Oracle 64bit 11gR1 11.1.0.7.
I couldn't get the window that has options to select
Oracle database 11g
Oracle client
Oracle Clusterware
It seems it only want to install Oracle database server, any clue?
Is it seperated download now?
Regards
Howard
Edited by: user12004308 on 16-Jun-2011 12:08 PM

Hi,
Windows 2008 R2 is not yet certified for running clusterware 11.1.0.7. You would need windows 2008 to be certified
you can get the installer from here
Cheers
FZheng

SMB connection to Windows 2008R2 File Server Problem

Hello, I recently migrated a file server from Windows 2003 to Windows 2008R2. Since the migration, I can no longer use our Canon multi-function printer to scan documents to a network share on the new file server. The share has Everyone, System
and Authenticated Users set to Full control and the NTFS Security is setup for Everyone to modify. The connection from the Canon uses SMB using a domain account called jdoe.
I wondering if the problem is related the the LAN Manger authentication level settings. On the new file server and domain controllers it's set to Network security: LAN Manager authentication level is set to Send NTLMv2 response only\refuse LM &
NTLM. I have setup a network capture and hope somebody can help me out with determinging the problem.
Here is the detals of the Error

It does seem possible that the NTLMv2 authentication level might be affecting things. So I would give it a try. It's difficult to troubleshoot from the image, but I beleive there is a flag in the negotiate response that might give you a clue.
In either case, I think your question would be better served by our networking group, rather than the group that makes the tool. While we have some general protocol knowledge, we don't have the depth that the experts for each component would have.
If changing that setting doesn't work we can move this thread over to the right place.
Thanks,
Paul

Cannot access CIFS shares from Windows 2008R2 on NSS3000

Hi,
I am trying to upgrade our 2008 domain to 2008R2 but with that last version we cannot access to cifs shares on the NSS3000. Access from all other clients are OK. It was 100% OK under 2008...
Whether I use the IP or the FQDN, I got an error from Windows 2008R2. From IP, I got "No process is on the other end of pipe." and from network Gui, I got "Windows cannot access \\nas0026CB647BC6. Check the spelling of the name...blabla. Details : Error Code : 0x80070035, The network path was not found".
On the NAS, I got this errors in the cifs logs :
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:45, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:45, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:45, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:45, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
Feb 24 14:12:45 NAS0026cb647bc6 winbindd[28457]: rpc_api_pipe: Remote machine WIN2008-PDC.bluemoon.holywell.leics pipe \NETLOGON fnum 0x4002returned critical error. Error was NT_STATUS_PIPE_DISCONNECTED
Feb 24 14:12:48 NAS0026cb647bc6 winbindd[28457]: [2011/02/24 14:12:48, 0] rpc_client/cli_pipe.c:rpc_api_pipe(790)
It is likely to be an incompatibility between Windows 2008R2 smbv2 and the NSS3000 smbd but I can't find any firmware update and I can't find the process to allow in the registry.
I can ping it, I can connect on the web interface, I can connect on FTP but no CIFS at all.
Firmware version running is 1.20.1. Hardware rev : V03.
Any idea?

Hi SpaceBass, have you looked into sharepoints or into Netinfo manager. I have been playing around with sharepoints and it does let me enter non local users into the sharing prefs- albeit manually. Only thing is , depending on the number of macs you have, it could be a long and tedious job entering it all by hand. Netinfo may have an easier way, I'll do some more digging and post back.
Cheers.

Binding to Windows 2008r2 domain gives wrong kvno

I'm getting inconsistent results binding a 10.6.6 system to a windows 2008r2 domain with two DCs. The domain join always appears to work, but in some cases I'm not getting a usable /etc/krb5.keytab file. The upshot is that I can't use GSSAPI with ssh to access the mac from other unix systems.
In the failure case, the KVNOs in /etc/rb5.keytab disagree with the values in AD. Using 'klist -k -t' on the mac, I see all the KVNOs are 1, but looking on the windows side with ADSIedit, the msDS-KeyVersionNumber on the computer account is 2.
In the success case, there are duplicate entries for all the keys in the Mac keytab file, one set with KVNO 1 and one set with KVNO 2, windows reports KVNO 2, and everything (ssh) works.
This also affects kerberos console logins with the /etc/authorizations 'builtin:krb5authenticate,privileged' patch (krb5authnoverify works in both cases).
I have inconsistent results with Directory Utility (sometimes I get a working krb5.keytab and sometimes I get the broken one). I haven't seen any rhyme or reason to the behavior. I go away for awhile, and maybe it works when I come back (and maybe not). But never an error; DU always thinks it successfully bound. As an aside, with dsconfigad I always get the broken keytab file.
Any assistance is most appreciated. Thanks!
David Thompson
The University of Wisconsin-Madison
Waisman Brain Imaging Lab

Thanks for your reply!!
Yes! I have done it both ways but still the same thing. Now, something interesting, since I'm in the initial setup of the Domain, I decided to reconfigure it to be mydomain.net, instead of mydomain.local. Now I try to bind and I get an error saying that the DNS name forest is incorrect. However, I cannot change the Directory forest from the default value, which is Automatic. So now, I wonder if its that the domain name needs to be set to my.domain.net rather than mydomain.net. I'm lost here.

Windows XP OEM Full

Hi, is it possible to install Windows XP OEM without SP2, and after instalation upgrade it to SP2? I asking this because I have the 2002 version of XP.
Thanks,
Biga

XP version is 2002 however double check to see if SP2 is already on there. If not then you cannot install it without SP2. Service Pack 2 must be on the same installation disk at the time of installation. Many have tried doing what you suggest but without success. Furthermore, if your OEM disk came with a PC that you already have then that will not work either even if it has SP2 on it. This is because that OEM disk has been used to install WIndows on your PC and its license cannot be used on different PCs.
So, to use an OEM FULL version, you will need to buy it.
There is one process that you can try to make this work. Assuming that you have a FULL version of Windows XP with SP1 and you have SP2 downloaded and saved on your HD, then you can use a method called slipstream. This method combines Windows XP and SP2 on to one installation disk to be used for installation of windows on a boot camp partition. This process is slightly difficult and instructions will need to be followed PERFECTLY. It has proven to be successful in some cases. Frankly, I don't think it is worth the headache. The instructions on slipstreaming are available [HERE|http://www.helpwithwindows.com/WindowsXP/winxp-sp2-bootcd.html].
Axel F.

ORA-01031: insufficient privileges in oracle 10.2 in windows 2008r2

Dear All,
We have install SAP ecc6 EHP4 on oracle 10.2.0.5 on windows 2008R2
whenever we schedule any activity in db13 we are getting below error .
=================================
Job started
Step 001 started (program RSDBAJOB, variant &0000000000059, user ID PARESH)
Execute logical command BRBACKUP On host IRDAECCDEV
Parameters:-u / -jid FLL__20110922104226 -c force -t online -m full -p initieq_online.sap
BR0051I BRBACKUP 7.20 (3)
BR0055I Start of database backup: begvgwgh.fnf 2011-09-22 10.42.27
BR0484I BRBACKUP log file: K:\oracle\IEQ\sapbackup\begvgwgh.fnf
BR0280I BRBACKUP time stamp: 2011-09-22 10.42.28
BR0301E SQL error -1031 at location BrInitOraCreate-2, SQL statement:
'CONNECT / AT PROF_CONN IN SYSOPER MODE'
ORA-01031: insufficient privileges
BR0303E Determination of Oracle version failed
=================================
As per sap note 400421 i have carry out all the check and all are perfect.
Also i have check below notes and every thing are fine
Note 834917 - Oracle Database 10g: New database role SAPCONN
Note 1028220 - ORA-01031: Insufficient privileges despite SAPCONN role
Note 700548 - FAQ: Oracle authorizations
Also i have check the note which suggest to run the sapdba_role.sql script
But still i am getting the same error.
Also SAPSID services is running with user id sapserviceSID and i change it to SIDadm but no lock.
Request you please help me in this regard.
Sincerely
Paresh

As expected
This is really a very small problem but very weird we suffered so many times. May be we should confirm the authorizations for SAPServiceSID and sidadm users on that windows host, sometimes we miss this part in Windows to check.
Kernel folders should be proper accessible by both of the users. Also, please keep SAP instance service via SAPServiceSID itself.
Just to reconfirm - you restarted SAP and restarted SAP/Oracle services as well, right ?
Thanks

Windows 2008R2 OEM compatibility

Similar Messages

Maybe you are looking for