Windows 2011 (2008 R2) Server boots to repair options

Hi, I have looked at other threads but can't seem to solve my issue.
So I have Server 2011 installed and really took care of my system. I was installing updates, on any power loss I ran chkdsk every time, installed proper drivers and it was really running well, though it's a consumer based pc (Some ASUS Desktop PC).
Last thing I did was install the Cannon MP160 driver so I could use scanning feature of the printer. Default windows driver has no TWAIN driver built in. The cannon website does not offer 2008 R2 driver, but instead only Windows 7 driver.
I am pretty certain that I rebooted after install which I generally always do.
However, there was a power loss.
So I turn on the pc, ASUS logo goes away, there is a dark screen and pc reboots itself. Then from ASUS logo (POST that is) it goes to 1.repair my pc, 2. boot normal. I tried F8 with safe mode, same thing, computer just reboots. I tried
bootlogging and can't seem to find bootlog.txt with command prompt.
So I tried this from command prompt;
chkdsk d: (windows installation) /r - no problem
rebuild bcd - can't find windows installation
there is another command where it makes sure the drive is bootable volume, so it does something to volume registry entry, The process goes through three edits and 2nd edit says the access is denied. I think command ends in NT60 /All
Then I tried Microsoft bootable ISO to uninstall 2 patches that could cause system to not boot - no success.
So last thing I tried was to use Windows 7 boot cd, which will give an option to repair possible boot problems. Can't resolve them - that's what the message says.
Now, I am thinking well I really don't need Server running, I could just reinstall windows 7 and use that, since I really just use it as storage, but it would be nice to get the system back up and running the way it was.
Well, I am open to any suggestions, maybe an in-place installation should be done, if possible?
Thanks,

Might ask them over here.
http://social.technet.microsoft.com/Forums/en-US/home?forum=smallbusinessserver2011essentials
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

Server 2012 cluster repair option

Hello
Can anyone tell me what a repair actually does to an offline cluster? I cannot find it in technet or msdn.
Thanks

Hello, Tim, sure thing.
I have a two node Windows 2012 server cluster. A few SQL installs are nested in it. I am having some issues and from inside Failover Cluster Manager under the Cluster Core Resources when I right click the name of the cluster and go to "More Actions"
there's a greyed out "Repair" option. I know to use the repair option I have to stop the cluster.
I want to know what the repair option actually does. I cannot find any documentation on it anywhere.
The issues that I have are two fold, first the local "cliuser" account on each node password is trying to reset itself, when it is setup for never change and never expire when I view the properties in the local user. Secondly in my Cluster event viewer
my resources are seeing errors for DNS "the handle is invalid". My DNS is server 2003. I've already applied hotfix 2838043 to both nodes.

Windows 8.1 won't boot after repair loop fix

I have a 1 year old Gateway desktop with Windows 8.1 installed at the factory so I have no Install disk. My problem began when the computer went into a repair/recovery loop which I found out is a common unresolved bug for Windows 8.1. After hours and hours
of internet search and trial and error I was able to get the repair loop resolved by going into command prompt and typing "bcdedit /set {default} recoveryenabled No}". I then tried rebooting and the Recovery page came up stating:
Your PC needs to be repaired.
The operating system couldn't be loaded because a required file is missing or contains errors.
File: NETIO.SYS
Error code: 0xc000000f
When I tried all of the options to address this problem none of them worked. I can't even boot into safe mode. Any suggestions?

Hi Boomer3s,
Can we boot into the Windows Recovery Environment now (Restart and keep pressing "Shift")?
If the Windows Recovery Environment is not available ,we can choose to boot from a installation media .We can make a Windows 8.1 installation media here.
Create installation media for Windows 8.1
http://windows.microsoft.com/en-HK/windows-8/create-reset-refresh-media
a)      Insert the installation DVD or USB and boot Windows 8.1 from it.
b)      In the ‘Windows setup’ page select the ‘Language to install’, ‘Time and currency format’ and the ‘keyboard or input method’ and click on ‘next’.
c)       Click on ‘Repair your computer’ and select ‘Troubleshoot’.
d)      Click on ‘Advanced options’ and select ‘Automatic Repair’ and select the operating system.Or the "System restore option "
Hope this helps
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Satellite C55-A-1N2 - Windows is broken and no access to repair option

Hello,
A friend of mine got a Satellite C55-A-1N2 brand new from november 2013 with windows 8.1.
The serial number is: yd344983s
At the beginning, there was a wifi issue.
I found lot of adware...
I uninstall most of them by hand, and clean everything with adwcleaner.
The portable works fine, i switch off the DNS client service and add anti-pupsadware in hosts file to prevent any new adwares installation.
All was ok and give it back to friend.
But at the next start up, windows was slow, unable to connect wifi, enter config panel, do anything actually.
I tried according to manual, to press F8 and power on, but that just switch on to windows login.
I tried also F12, and tried to use windows seven CD with no success.
Do you have any ideas of what i can do ?
That looks pretty bad.
Thanks.
Mickael
France.

> http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm
I dont know how to access that blue menu
> As mentioned by Keany, you have to completely power OFF the system. The point is that Win 8 as well as Win > 8.1 do not power off the notebooks but set it to hybrid shut down mode in order to speed up the system boot > process.
As i said in the first post, it was no possible to do lot of things apart login, so set the option for full power off was not possible.
I manage to access to bios using F2, but was not useful (just play with CMS vs UEFI, normal boot speed ...)
Nothing to lose, i tried the "0" that lead me to HDD Recovery for a full reset.
Manual said that it will erase eveything, but actually user & documents are still here.
Now that it works fine, i set the option for full power off for more tests and acknowledgment :
- The F12 works, HDD recovery or bootable devices choice. Ok
- The 0 still lead to HDD recovery. Ok
- The F8 still does nothing ... ??!! Strange !
So manual are not very accurate on this model, *but my job is done and i did recovery dvds for next time.*
Thanks.

WDS Windows Server 2008 R2 network boot PXE x86 UEFI support?

Hi,
WDS Windows Server 2008 R2 network boot PXE x86 UEFI support?
-I have an SCCM 2012 SP1 site on Windows server 2008 R2.
-I have an HP ElitePAD 900 with Atom x86 processor, and I have some problem to deploy an OSD image to the ElitePAD.
Do I need WDS on an Server 2012 to get PXE x86 UEFI support with KB2817245?
http://support.microsoft.com/kb/2817245/en-us
/Per Sai
/SaiTech

Is this why I get this error with 2008R2?
Windows failed to start. A recent hardware or software change might be the cause. To fix it... <blahblah>
File:\Windows\System32\boot\winload.efi
Status: 0xc0000359
Thanks,
Jason

Event IDs 136 and 137 0x80000000000000 in System Log on Windows 2008 R2 Server, Exchange 2010 in Cluster

Hi,
I'm having an issue with one of my exchange 2010 Servers. We had a power outage and upon recovery, I cannot start Services Net.Pipe Listener Adapter and Net.Tcp Listener Adapter (And thus cannot Start IIS and provide Exchange Client Services.) This is a
physical server (Not VMWare or Hyper-V)
The System event log has lots of Event 136's and 137s on Ntfs with the keyword - 0x80000000000000 - The General Messages are: The default transaction resource manager on volume C: encountered an error while starting and its metadata was
reset. The data contains the error code.
and
The default transaction resource manager on volume OS encountered a non-retryable error and could not start. The data contains the error code.
XML Output as follows:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Ntfs" />
<EventID Qualifiers="32772">136</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2014-11-17T18:10:37.788942300Z" />
<EventRecordID>315532</EventRecordID>
<Channel>System</Channel>
<Computer>server.domain.com</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>C:</Data>
<Binary>1C00040002003000020000008800048000000000060019C000000000000000000000000000000000060019C0</Binary>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Ntfs" />
<EventID Qualifiers="49156">137</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2014-11-17T18:10:37.788942300Z" />
<EventRecordID>315531</EventRecordID>
<Channel>System</Channel>
<Computer>server.domain.com</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>OS</Data>
<Binary>1C0004000200300002000000890004C000000000020100C000000000000000000000000000000000020100C0</Binary>
</EventData>
</Event>
When I attempt to start the services - I get the following errors:
The Net.Pipe Listener Adapter service depends on the Windows Process Activation Service service which failed to start because of the following error:
Transaction support within the specified resource manager is not started or was shut down due to an error.
The Net.Pipe Listener Adapter service depends on the Windows Process Activation Service service which failed to start because of the following error:
Transaction support within the specified resource manager is not started or was shut down due to an error.
I have tried the "fsutil resource setautoreset true" fix without success.
Any ideas or direction would be much appreciated. Restoring this server will be extremely difficult.
Thanks!

We can close this question.
From an elevated prompt, I ran 'fsutil resource setautoreset true' and attempted to remove the files with .blf and regtrans-ms file extensions from C:\Windows\System32\config\TxR. but these files were locked by system processes. (They are also
tagged with the hidden file attrib so you may not see them at first)
So, I booted the system with a Windows 2008 R2 Install Disk, selected repair OS and selected the command prompt. I then performed a chkdsk /f c: and selected "Y" to unmount the drive. It made some repairs.
With the system booted from the install disk, and chkdsk executed, the locks were freed and I was able to delete the files from C:\Windows\System32\config\TxR.
Once the system rebooted, the services came back fine and everything was back to normal.

Installing CR VS2010 on Windows 2008 Core Server

Hello,
We are attempting to re-build our web servers and reduce their footprint. In this effort we have chosen to use Windows 2008 Core Server with all of the web server installation features. In addition we upgraded our application to CR for VS2010 after finding that it supported Windows Server 2008. However, while trying to deploy the MSI packages to the server we are encountering the following error.
MSI PACKAGE
CRRuntime_32bit_13_0_1.msi
ERROR
Error 1904. Modeule C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\pageobjectmodel.dll failed to register. HRESULT -2147024770
SYSTEM INFORMATION
OS Name:                   Microsoft Windows Server 2008 R2 Standard
OS Version:                6.1.7601 Service Pack 1 Build 7601
OS Manufacturer:           Microsoft Corporation
OS Configuration:          Member Server
OS Build Type:             Multiprocessor Free
Registered Owner:          Windows User
Registered Organization:
Product ID:                00477-001-0000421-84205
Original Install Date:     4/27/2011, 10:12:31 AM
System Boot Time:          9/27/2011, 9:47:41 AM
System Manufacturer:       Microsoft Corporation
System Model:              Virtual Machine
System Type:               x64-based PC
Processor(s):              1 Processor(s) Installed.
                           [01]: Intel64 Family 6 Model 44 Stepping 2 GenuineInt
el ~3058 Mhz
BIOS Version:              American Megatrends Inc. 090004 , 3/19/2009
Windows Directory:         C:\Windows
System Directory:          C:\Windows\system32
Boot Device:               \Device\HarddiskVolume4
System Locale:             en-us;English (United States)
Input Locale:              en-us;English (United States)
Time Zone:                 (UTC-08:00) Pacific Time (US & Canada)
Total Physical Memory:     1,536 MB
Available Physical Memory: 1,031 MB
Virtual Memory: Max Size: 3,840 MB
Virtual Memory: Available: 3,316 MB
Virtual Memory: In Use:    524 MB
Hotfix(s):                 32 Hotfix(s) Installed.
                           [01]: KB2425227
                           [02]: KB2446710
                           [03]: KB2476490
                           [04]: KB2478662
                           [05]: KB2503665
                           [06]: KB2506014
                           [07]: KB2506212
                           [08]: KB2506223
                           [09]: KB2507618
                           [10]: KB2507938
                           [11]: KB2508429
                           [12]: KB2509553
                           [13]: KB2510531
                           [14]: KB2511455
                           [15]: KB2518869
                           [16]: KB2524375
                           [17]: KB2525694
                           [18]: KB2533552
                           [19]: KB2534366
                           [20]: KB2536275
                           [21]: KB2536276
                           [22]: KB2539635
                           [23]: KB2552343
                           [24]: KB2555917
                           [25]: KB2556532
                           [26]: KB2560656
                           [27]: KB2563894
                           [28]: KB2567680
                           [29]: KB2570791
                           [30]: KB2570947
                           [31]: KB2616676
                           [32]: KB976902
INSTALLED PACKAGES
Name=Microsoft ASP.NET 2.0 AJAX Extensions 1.0
Name=SolarWinds Log Forwarder for Windows
Name=Microsoft Visual C++ 2005 Redistributable
Name=Microsoft Visual C++ 2008 Redistributable - x86 9.0.21022
Name=Microsoft .NET Framework 4 Extended
Name=Microsoft .NET Framework 4 Client Profile
Any insight you can provide on the issue would be appreciated.
Thanks,
Phil

The DLLS that fail to register are:
pageobjectmodel.dll
reportrenderer.dll
PageObjectModel.dll is missing the following dependencies:
MSVCR80.DLL
OLEDLG.DLL
DEVMGR.DLL
EFSADU.DLL
NETPLWIZ.DLL
RASAPI32.DLL
RASDLG.DLL
SHDOCVW.DLL
TAPI32.DLL
ReportRenderer.dll is missing the following dependencies:
MSVCR80.DLL
OLEDLG.DLL
DEVMGR.DLL
EFSADU.DLL
NETPLWIZ.DLL
RASAPI32.DLL
RASDLG.DLL
SHDOCVW.DLL
TAPI32.DLL
If I ignore the registration errors the installer completes. When I run my application I get the following error:
The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception. >>> Could not load file or assembly 'CrystalDecisions.ReportAppServer.CommLayer, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
Do we need to run the full version of Windows Server 2008 for this to work? I have installed the required VC++ run-time dependencies and still no luck.

Add Windows 2008 Terminal Server to RWW/RWA

I would like to add our Windows 2008 Terminal Server (not R2) to RWW in Windows 2012R2 Essentials. The connect computer wizard did not work on the Windows 2008 server, returning Win32 error.
How do I add the 2008 TS to the devices listing in RWW without using the connector wizard (as it does not work). The Windows 2008 server has been join to the same domain manually.

You cant add it as a tile device in the way you could in SBS 2011 Standard.
You can create an RDP file, and save that so it is accessible via the RWA then add a link to the RWA to that file.
You may need to tweak IIS to allow .rdp files.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Wyse Thin client not connecting to Windows 2008 R2 server

Configuration
SBS 2011 Server
Windows 2008 R2 server with Remote Desktop Services installed, License Manager installed.
WYSE WT3125SE thin clients with Windows CE 5
I setup the Windows 2008 with Remote Desktop Services and was able to successfully connect the Thin client. Then I installed the License Manger and applied my Open license using User Cals. Was able to login. Next day I get the following
error-"Because of a security error, the client could not connect to the remote computer. Verify that you are logged onto the network and then try connecting again" I still can connect fine from other machines even Windows Home Ed.
I remove license server and still was unable to connect. Built a second Windows 2008 R2 server with RDS on it. Was able to connect without issue. Pointed it to the first RDS server license manager and have still been able to connect with
the Thin Client. The thin client can rdp to the SBS server without issue in admin mode, can connect to RDS2 server but not RDS1 with the license manger. So my issue is with the license and so my question is what is it with the license server
running on that server that is keeping thin client from connecting. I even did a reload of RDS1 and tested connecting throughout the process and it worked up until I applied the license and then it stops. And then if I uninstall the license, rds, remove
from domain still not able to connect. Any help would be appreciated.

We had the same problem with older terminals after cloning a 2008R2 rds server and sysprep it.
The original rds server worked fine but when the old terminals connect to the new 1 they come up with the error : Because
of a security error, the client could not connect to the remote computer. Verify that you are logged onto the network and then try connecting again"
After reading all of the postings about this issue and tried the reactivate solution of the license server,
I was sure that it had something to do with the x509 certificates that are generated the first time you connect to a valid license server.
What I did, I installed a new license server activate it but did not install licenses on it.
I pointed the defective rds server to the newly installed license server and deleted the following registry keys:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM
Certificate
X509 Certificate
X509 Certificate ID
X509 Certificate2
Then reboot.
After the reboot all old terminals can connect fine again. As final step I pointed the rds server to the same license server as the other ones,
reboot and all worked fine.
So conclusion is that when you pont a rds server to a license server that has the new type of licenses on it it will generate the wrong x509 certificates
that are not supported by the older clients, by pointing it first to 1 without any rds calls on it, it generates the older x509 certificates which are compatible with the older rdp clients then the switch to new license server will then not regenerate the
x509 certs so it keeps working.
I hope this helps someone
This issue was driving me crazy so very happy that it is resolved now
Cheers Frits

Package 'Microsoft SQL Management Studio Package' failed to load in Windows 7 OS/Sql Server 2008 R2

I encountered this error while setting up a new machine. I have VS 2008 with SP1, VS2010 installed. I tried to re-install Sql Maangement Studio 2008 R2 and Sql Server 2008 R2 but to no avail. However, I were able to isolate this to missing dlls.
It is looking for this dll. I don't see it installed on the system. Anyone can tell me why?
microsoft.sqlserver.management.multiservermgmtui, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91
Thanks, Scott Ma. Schlumberger IT & Software Community Leader/MS SME for Entity Framework and Windows Azure Platform.

Hello,
Please try to repair the SQL Server 2008 R2 installation:
http://msdn.microsoft.com/en-us/library/cc646006.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

BO XI 3.1 SP2 error while installing in Windows 2008 ENT Server 32 Bit

Hi
We have windows 2008 enterprise edition 32 Bit SP2 , While installing BO 3.1 SP2 we are getting the following error.
"Some files could not be created.
Please close all applications, reboot Windows and restart this installation."
1.we do have enough space as well as we are installing it through administrator account.
2.I increase the virtual memory size from 2 GB to 4 GB, still same error.
3.we downloaded the software in two diffrent machines. We tried extracting the "exe" file in two machine but still getting the same error.
4.We dont have any firewall connected and windows firewall is off.
Is there BO 3.1 Sp2 is available for windows 2008 ent server 32-Bit?
Because In the download site there is Windows Server on IA32 32-bit.
is it the correct version?
Please help us to solve this problem
Thanks

We have opened a ticket for this. After subsequent discussion with the forum support person we have installed BO Enterprise 3.1 SP2 fixed pack 2.5 on the server (Windows Server 2008 SP2). On the client side, we have also installed BO Enterprise 3.1 SP2 fixed pack 2.5 and Live Office SP2 fixed pack 2.5.
Once we tried to use the Web Intelligence document based on OLAP Universe in excel through Live Office it gives the following error.
"Failed to get the document information. (LO 26315) A database error occured. The database error text is: Failed to set properties (The component Microsoft® OLE DB Provider for Analysis Services returned server error (Database 'Sales' does not exist.)). (WIS 10901)(6315)".

Unable to login to Report Service on Windows 2008 R2 server

I have reporting services installed on a Windows 2008 R2 server, When I make and RDP connection to the server and go to http://servername/Reports everything works fine. When I try to connect from another client to the web service, it asks for username and
password. it fails 3 times and the shows a blank page.
When I see the Event Viewer in the server (Windows Logs --> Security, I can see an Audit Failure:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          9/4/2014 11:46:25 AM
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      MI-SWACO-DB.houston.livequest.net
Description:
An account failed to log on.
Subject:
   Security ID:       NULL SID
   Account Name:       -
   Account Domain:       -
   Logon ID:       0x0
Logon Type:           3
Account For Which Logon Failed:
   Security ID:       NULL SID
   Account Name:       Administrator
   Account Domain:       HOUSTONLQ
Failure Information:
   Failure Reason:       An Error occured during Logon.
   Status:           0xc000035b
   Sub Status:       0x0
Process Information:
   Caller Process ID:   0x0
   Caller Process Name:   -
Network Information:
   Workstation Name:   MI-SWACO3
   Source Network Address:   -
   Source Port:       -
Detailed Authentication Information:
   Logon Process:
   Authentication Package:   NTLM
   Transited Services:   -
   Package Name (NTLM only):   -
   Key Length:       0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
   - Transited services indicate which intermediate services have participated in this logon request.
   - Package name indicates which sub-protocol was used among the NTLM protocols.
   - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-09-04T16:46:25.247229500Z" />
    <EventRecordID>8917</EventRecordID>
    <Correlation />
    <Execution ProcessID="504" ThreadID="1344" />
    <Channel>Security</Channel>
    <Computer>MI-SWACO-DB.houston.livequest.net</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">Administrator</Data>
    <Data Name="TargetDomainName">HOUSTONLQ</Data>
    <Data Name="Status">0xc000035b</Data>
    <Data Name="FailureReason">%%2304</Data>
    <Data Name="SubStatus">0x0</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">
    </Data>
    <Data Name="AuthenticationPackageName">NTLM</Data>
    <Data Name="WorkstationName">MI-SWACO3</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">-</Data>
    <Data Name="IpPort">-</Data>
</EventData>
</Event>
The firewall is OFF in both client and server.
I saw a similar question and the answer is related to firewall which is not may case.

Hi Mario,
According to your description, when you try to access the Report Manager in another client, a login dialog prompt. After typing a valid username and password 3 times, a blank page displays.
Generally, the issue is always caused by the Report Server is configured to use Kerberos authentication, while the Service Principal Name(SPN) is not configured correctly. To fix this issue, please refer to the following methods:
Register an SPN for the Report Server service under the domain user account.
Change the service account to run under a built-in account such as Network Service.
Remove RSWindowsNegotiate and ensure RSWindowsNTLM is specified in the rsreportserver.config file.
Besides, the issue can also be caused by the Internet Explorer (IE) didn't pass the user's credential to the Report Server automatically or the IE is not Windows Integrated enabled. For more detail steps about how to address this issue, please refer to the
following steps:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/184c4f6c-b292-4f9a-beca-80b70f4392fe/report-manager-prompts-3-or-4-times-for-usernamepassword-before-letting-users-in?forum=sqlreportingservices
Reference:
Resolving Kerberos Authentication Errors When Connecting to a Report Server
Solving the Reporting Services Login issue in the February CTP of SQL Server 2008
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Bit Locker Implementation in Windows 8.1 machine using Windows server 2008 r2 server group policy.

is it possible to enable the bit locker only for windows 8.1 machines through windows 2008 r2 server group policy ?
Thanx and Regards,
Shanif

Hi Shanif,
Yes, we can do this.
Regarding how to enable Bitlocker via group policy, the following article can be referred to as reference.
Cannot Save Recovery Information for Bitlocker in Windows 7
http://blogs.technet.com/b/askcore/archive/2010/02/16/cannot-save-recovery-information-for-bitlocker-in-windows-7.aspx
After configuring the settings, we can use security filtering or WMI filtering to apply the policy to specific computers.
Regarding this point, the following blog can be referred to for more information.
Security Filtering, WMI Filtering, and Item-level Targeting in Group Policy Preferences
http://blogs.technet.com/b/grouppolicy/archive/2009/07/30/security-filtering-wmi-filtering-and-item-level-targeting-in-group-policy-preferences.aspx
Best regards,
Frank Shen

Mac Mini Server Boot Camp Windows 8.1 White Screen Issue

Hello Apple Peeps!
I have a Mac Mini Server 2012 which I have had for around 6 months. I use it quite a lot mainly for Music Production on the OS X side and Graphic Design on the Windows side.
I recently decided to factory restore it as I wanted to spring clean it and reorganise the way some of my apps were installed. The way I had it set up was it was running OS X on one SSD and Windows 8.1 (installed using Boot Camp) on the other SSD. The way I went about the factory restore was I first used disk utility to erase/format the Windows SSD to Mac OS Extended (Journaled) and then went about the factory restore of OS X onto the other SSD as normal (following instructions from the Apple website).
The issue I am having now is that my newly installed Windows 8.1 (used solely on a single SSD) is hanging on a white screen for quite a long time before the Windows splash screen shows up, where before when I would boot or restart into Windows there was no white screen and it would go straight into the Windows splash screen and load to the desktop very quickly.
So my question is...
Why do I get this prolonged white screen before the Windows 8.1 splash screen appears? How can I get rid of it? It was certainly not present on my previous installation. Can anyone advise me what the computer is doing during this time so that I can do some further research into a solution.
What I have tried already....
1) PRAM & SMC reset.
2) Setting the startup disk to Boot Camp in both OS X and Windows 8.1.
3) Reinstalling Windows 8.1 through Boot Camp.
MAC MINI SERVER (LATE 2012), 2.6GHZ QUAD CORE I7, 16GB RAM, 2 x 256GB SSD, OS X 10.10.2, Windows 8.1 (Retail), Boot Camp Assistant (5.1.3), Covered By AppleCare.
I would really appreciate some help with this ;-)

I have right clicked on each SSD in Device Manager and selected the option 'Properties' from the drop down menu, which brings me to this window...
I'm not sure where I can find Device Attributes, I have clicked on each of the tabs in the window above, as far as I can see none of them mention AHCI enabled or anything similar. Thanks for all of your responses by the way...much appreciated!

Unable to list SFTP Directory on windows 2008 r2 server from internet

Hi experts,
I have configured a SFTP on windows 2008 r2 server. And i am using the Filezilla on client machine to connect to SFTP server.
The connection works properly on internal network but it displays error when i connect from internet.
Error: GnuTLS error -53: Error in the push function.
Response: 550 Data channel timed out.
Error: Failed to retrieve directory listing
This machine is publish with public IP and port22. The connection and authorization process gets complete but stops are Directory Listing.
PLease suggest the troublshooting steps..
Let me know if any more info is rquired.

Hi,
Do you also use the Filezilla to configure SFTP server? Since you use Filezilla on client machine to connect to SFTP server, I would suggest you ask for help from Filezilla forums for better and accurate answer.
https://forum.filezilla-project.org/
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 2011 (2008 R2) Server boots to repair options

Similar Messages

Maybe you are looking for