Windows 2012 R2 hyper-v integration services update - error code: 50

Physical Host is a brand new Windows 2012 R2 with hyper-v role, VM is a Windows Server 2012
I try to upgrade the integration services update, VM become unresponsive and I lost connection to it,  had to turn it off, afterwards it wouldn't boot.
Tried F8 on the reboot and then switched to the command prompt to manually upgrade the integration services running the setup, but got an error (Error code: 50 )
VM halts in the middle of booting up.
saying: Please wait ...
Anyone has any idea why it happened and how to fix this?

Hi Seyed,
Please try to follow the link below to install integration services manually :
http://blogs.technet.com/b/virtualization/archive/2013/04/19/how-to-install-integration-services-when-the-virtual-machine-is-not-running.aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Windows 2008 Hyper-v Guest - BSOD after Integrated Services updated

    Hi,
    Hyper-V single node with Windows 2012 R2 Datacenter - the VM had its Integrated Services update and rebooted properly. After that, Windows 2008 start and shows BSOD as listed below - safe mode doesn't work. Any tips?
    Vinicius Deschamps

    Hi deschamps,
    Is the VM brand new setup ?
    Did you try to attach the VM's VHDx file to another new created VM ?
    Also you can try to mount the vhdx file and copy Dump File (default path  %SystemRoot%)then analysis it :
    http://blogs.technet.com/b/juanand/archive/2011/03/20/analyzing-a-crash-dump-aka-bsod.aspx
    Best Regards
    Elton JI
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Windows 2008 r2 guests blue screen on Windows 2012 R2 Hyper-V Cluster with e5 2670-v2 processors

    Hello all,
    We have a new hyper-v infrastructure deployed in two brand new Dell R720 Servers with 384GB of Memory and dual Intel e5 2670-v2 processors. This infrastructure is replacing an existing hyper-v 2008 R2 and all the guests are being migrated to this new cluster.
    The issue we are seeing is our 2008 r2 guests blue screening ocasionally with 0x0000001a,0x0000004e or 0x00000050 bugchecks.
    All this guests are configured with dynamic memory and with the integration components up to date. These same guests were running with no problems in the hyper-v 2008r2 cluster.
    When searching i found this article from vmware that pretty much describes what we are facing:
    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2073791
    Are you aware of the same problem with this kindd of hardware on windows 2012 r2 hyper-v?
    Thanks!
    Nuno Carvalho

    Meanwhile i found this May 2014 update on the intel specification of the CPU we are using:
    CA135 Incorrect Page Translation when EPT is enabled
    Problem:
    If EPT (Extended Page Tables) is enabled, then a complex sequence of internal processor events may result in unexpected page faults or use of incorrect page translations.
    Implication:
    Due to this erratum a guest may crash or experience unpredictable system behavior.
    Workaround:
    It is possible for the BIOS to contain a workaround for this erratum.
    Status:
    For the affected steppings, see the
    Summary Tables of Changes.
    This affects VMware as of the today update of the article i referenced in the first post, what about hyper-v?
    http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/xeon-e5-v2-spec-update.pdf
    Nuno Carvalho

  • Windows 2012 R2 Hyper-V event id's 20144 and 15130

    Windows 2012 R2 Hyper-V.
    After installing the May 2014 MS updates we can no longer start any of the guest VM's.  When attempting to start a VM the following is logged in the event logs:
    Event id 20144 from Hyper-V-VMMS "Failed to start the virtual machine XYZ' because one of the Hyper-V components is not running"  and
    Event id 15130 from Hyper-V-VMMS  "XYZ' failed to start"
    We've looked at http://support.microsoft.com/kb/2761004/en-us  and as far as we see the I/O verification option in Driver Verifier is disabled.   We also uninstalled the May
    2014 updates that we applied just before the problem started but this did not make a difference.
    Help please.

    Hi,
    I don’t found the similar issue when update, but from the event id, it seems is the incompatible hardware driver, please try to update all your hardware driver and firmware.
     Or you can try the following example command to confirm your Hyper-V service is running or not.
    =================================================
    C:\Users\Administrator>sc queryex vid
    SERVICE_NAME: vid
    TYPE              
    : 1  KERNEL_DRIVER
    STATE             
    : 4  RUNNING
    (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
    WIN32_EXIT_CODE    : 0  (0x0)
    SERVICE_EXIT_CODE  : 0  (0x0)
    CHECKPOINT         : 0x0
    WAIT_HINT         
    : 0x0
    PID               
    : 0
    FLAGS             
    C:\Users\Administrator>sc queryex vmbus
    SERVICE_NAME: vmbus
    TYPE              
    : 1  KERNEL_DRIVER
    STATE             
    : 1  STOPPED
    WIN32_EXIT_CODE    : 1077  (0x435)
    SERVICE_EXIT_CODE  : 0  (0x0)
    CHECKPOINT         : 0x0
    WAIT_HINT         
    : 0x0
    PID               
    : 0
    C:\Users\Administrator>
    ===========================================
    The related KB:
    You cannot start Hyper-V virtual machines after you enable the I/O verification option on a Hyper-V host computer that is running Windows Server 2012 or Windows 8
    http://support.microsoft.com/kb/2761004/en-us
    The similar thread:
    Hyper-V - 'Failed to start the virtual machine 'test' because one of the Hyper-V components is not running.'
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/d7e13a44-a9c3-4cb6-b45a-6b347f32b97c/hyperv-failed-to-start-the-virtual-machine-test-because-one-of-the-hyperv-components-is-not?forum=winserverhyperv
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Integration Services Fails to Update - Error Code: 1783

    Hi All,
      I moved a 2008R2 VM guest from a 2008R2 host to a 2012R2 host.  Two other VM guests that I moved went without an issue.
       When attempting to install the updated Integration Services for the third it errors...
    Upgrade Hyper-V Integrations Services
    A previous installation of Hyper-V integration services has been detected (version 6.1.7601.17514).  Click Ok to upgrade this installation.
    [I press OK]
    During the process it makes it to: Installing Guest Components....then
    An error has occured:  One of the update processes returned error code: 1783
    Any ideas how to resolve?

    Hi Kisner,
    "The KB 3004394 update that was dated December 10, 2014 can cause additional problems on computers that are running Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update
    is available to remove KB 3004394 from your computer."
    http://support.microsoft.com/kb/3024777
    I would like to check the current state of this issue .
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .
    Thanks for the direct link Elton - that resolved the issue and I could install Integration Services without issue.
    Thanks to you too Mark.

  • Hyper-V Integration Services - DriverPackage or Application

    Hello SCCM community,
    currently we are deploying the Driver for Hyper-V Integration Services (Windows6.x-HyperVIntegrationServices-x64.cab) as Driver Package. The deployment is OK. But if I look into Device Manager the drivers are not digitally signed. This is somehow
    strange.
    Deploying via DISM will result in same issue.
    I did then a research and found out that the package can be deployed via Application by using the MSI file. http://social.technet.microsoft.com/Forums/en-US/dd58b4cf-a954-4525-9a05-a84ebb073002/install-integration-components-hyperv-30-with-sccm-2012?forum=configmanagergeneral
    I tested the installation via MSI it works fine and the Device Manager is not complaining about not signed drivers.
    Do you face the same issue? Are you also deploying via Application?
    Many thanks in advance.
    Guitarman

    Ok, guys I did like described in the link. I used the setup.exe and deployed it as application.
    As detection method I used one of the sys-files which where installed.
    As uninstallation command I used: dism /online /Remove-Package /PackagePath:\\share\software$\Windows6.x-HyperVIntegrationServices-x64.cab
    /norestart

  • High Network Utilization on HeartBeat and LiveMigration networks - Windows 2012 R2 Hyper-V cluster

    Hi all,
    I have just setup a fresh Windows 2012 R2 Hyper-V cluster with 4 nodes.
    Config:
    Network:
    2 x Networks for iSCSI
    1 x VM network 1
    1 x VM network 2
    1 x Heartbeat
    1 x LiveMigration
    Disks:
    5 GB = Quorum
    2 x 2.99 TB (Deduplication enabled)
    The problem I am getting is that HeartBeat and LiveMigration (both configured with Cluster Only traffic) have alot of traffic on them even though no LiveMigration (the only card configured for LiveMigration) is going on.
    All network configuration is the same as it was in Windows 2008 R2 SP1 cluster which these machines where running before (not upgrade, fresh install and migration) and did not have this "problem".
    Has anyone experienced this or have a solution to this?
    Regards,
    Thorir
    thorir

    Hi Thorir,
    According to your discription , you can try to monitor and analyse the traffic of LM via network monitor for troubleshooting .
    Here is the links for downloading and using network monitor  :
    http://www.microsoft.com/en-us/download/details.aspx?id=4865
    http://technet.microsoft.com/en-us/library/cc723623.aspx
     Any further information please feel free to let us know.
    Hope this helps
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Windows update error Code 80072EF3

    Greetings!
    I have a Dell PowerEdge T320 that is experiencing this issue: Windows update error Code 80072EF3
    I followed instructions in article
    http://support.microsoft.com/kb/947821/en-usand ran the DISM.exe with the offline source (my DVD drive) to avoid using the windows update component that appears to be damaged. Command completed, but no effect on the error.
    Last successful update session was 7/8/2014
    Security Update for Windows Server 2012 (KB2922229) cancelled. Tried to install manually. Not applicable.
    Update for Windows Server 2012 (KB2811660) Failed.  When running the manual download get the message it is already installed. Same for KB2855336
    Any help appreciated.
    Below is the detailed update history.
    This link contains the log for the DISM repair tool:
    https://www.dropbox.com/s/3aufjud0wd0n53n/CBS.zip

    Hi,
    Please re-run Windows update and then provide us the windowsupdate.log file for check. It is under C:\Windows.
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Windows update error code 8e5e0147 help!

    I get the error code 8e5e0147 from windows update while trying to do 8 different updates. ive tried doing different things to fix this that I find online but nothing has help, can someone please help fix this?

    Please review this previous post:
    Cannot install some Windows updates, error code 8e5e0147
    Carey Frisch

  • Windows Vista Home Premium (SP2) - Update Error Code 80071AA7: Unable to install KB3033889

    I am having problems updating my Windows Vista Home Premium (SP2) with KB3033889
    I am always getting the Update error Code 80071AA7
    I have tried a clean boot, to install Microsoft Update Standalone Package (KB3033889), but does not worked.
    I tried Sfc /scannow, and "Could not repair corrupted file", and i have checked "CBS.log" file:
    POQ 93 ends.
    2015-03-19 02:18:46, Info                  CSI    000001dc [SR] Verify complete
    2015-03-19 02:18:46, Info                  CSI    000001dd [SR] Repairing 1 components
    2015-03-19 02:18:46, Info                  CSI    000001de [SR] Beginning Verify and Repair transaction
    2015-03-19 02:18:46, Info                  CSI    000001df Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-sidebar_31bf3856ad364e35_6.0.6002.18005_none_d0c824c923c9e622\settings.ini
    do not match actual file [l:24{12}]"settings.ini" :
      Found: {l:32 b:ceS/bmgz5Fkqs00J27mkzYn/b2SuD9mJsx/R1y3hPqA=} Expected: {l:32 b:v6OQf2AJO5FVbRBJuIwXxkdkCoOaSk3y0ol6uTH491o=}
    2015-03-19 02:18:46, Info                  CSI    000001e0 [SR] Cannot repair member file [l:24{12}]"settings.ini" of Microsoft-Windows-Sidebar, Version
    = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    After that i have checked "WindowsUpdate.log" file:
    2015-03-18    22:12:23:584    1264    db0    Handler    WARNING: Got extended error: "POQ    Operation    HardLinkFile    OperationData  
     \SystemRoot\WinSxS\x86_microsoft-windows-t..icesframework-msctf_31bf3856ad364e35_6.0.6002.19296_none_774ec727ec2f0da4\msctf.dll, \??\C:\Windows\System32\msctf.dll"
    I am out of ideas.
    Can some one please help me?
    What can i do?
    Thank you.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243)

    Unable to install windows 7 home premium updates error code 643 (KB 954430, KB973688 & KB2538243) - Please help me!!
    I'm running Windows 7 Home Premium 64-bit on a Lenovo ThinkPad E530. This laptop is only brands new.
    KB954430, KB973688 & KB2538243 - These three updates keep giving me problems. In Windows Update, under "view update history" these keep showing up as failed. I also get the error, "Code 643".
    At the end of the installation it tells me three updates are failed to be installed and when I shut down to try to update, Windows always configures up to ~15%, then fails, and reverts changes, then prompts me to install updates the next time I turn my computer on. Each time, I have to re-install every update that I had installed prior to shutting down.
    I went through Trouble shooter - "Fix it" numerous times, Repaired Net framework profile and also followed few instructions I found from the net such as running "Reset Register Windows update Components" but nothing works so far.
    I even tried manually installing KB954430 but it told me "An error occurred during the installation of assembly component. 7B30B69B-OE6C-B7EO-A06B-D6B9ABF34537  HR RESULT: 0 x 80070BC9" and the installation bar seems to stop at "Publishing Product information", then rolls back the installation.
    If you need more details, please tell me & Thanks in advance

    Checkout this Microsoft article: http://support.microsoft.com/kb/976982 
    It has some resolution steps that may help.
    Thank you for being a part of the Lenovo Family,
    Catie
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Donate KUDOS and Click "Accepted Solution"

  • Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.

    Dear Technet,
    Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
    My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
    even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
    Help me please.. thank you.
    Regards
    Shamil

    Hi,
    Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
    The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
    of the local Administrators group.
    If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
    user right.
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Getting Error while doing Control Panel - Windows Update Error code is 80070103

    Getting Error while doing Control Panel -> Windows Update Error code is 80070103. The optional Windows 7 update is
    Microsoft - Other hardware - WinUsb Device
    Please provide your email ID to send the Error screen shot.

    Hi!
    Check the following link to see if it solves your problem:
    http://support.microsoft.com/kb/952032
    Best regards
    Andreas Molin
    Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin

  • My Pavillion m7760n has stopped installing windows updates, Error Code 0x80070020. Unable to find a

    my Pavillion m7760n has stopped installing windows updates, Error Code 0x80070020.  Unable to find a fix for it.

    Start with this: http://support.microsoft.com/mats/windows_update/en-us?entrypoint=lightbox
    Then if that does not do it: http://support.microsoft.com/kb/883825/en-us
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • WindowsWcpOtherFailure3 & IE update error code 9C48

    I've been getting IE update error code 9C48 (can't install or run IE - other updates are fine) which lead me to Windows update troubleshooter which resulted in:
    Service registration is missing or corrupt
    Windows upgrade error 0x80070057(2014-04-22-T-07_59_49P)
    Problems unstalling recent updates
    Check for missing or corrupt files
    Corrupt files: CBS.Log windir\Logs\CDB\CBS.log.  which could not be fixed.
    Problem signature
    Problem Event Name: WindowsWcpOtherFailure3
    OsVersion: 6.1.7601
    File: base\wcp\sil\merged\ntu\ntsystem.cpp
    Function: Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile
    Line: 2057
    Status: c0000034
    StackHash: 0xb3e88ae3
    OS Version: 6.1.7601.2.1.0.768.3
    Locale ID: 1033
    Files that help describe the problem
    CbsPersist_20140323213151.cab
    CbsPersist_20140415214249.cab
    CbsPersist_20140418000011.cab
    CbsPersist_20140422000124.cab
    CbsPersist_20140423005328.cab
    CBS.log
    Sessions.xml
    poqexec.log
    SCM.EVM
    FilterList.log
    memory.hdmp
    minidump.mdmp
    Bucket ID: 53628667
    Any help would be greatly appreciated.  Thanks!

    Hi,
    Do we have any backup available here? If yes, please take use of it.
    For the update issue, please first take a try with the System Update Readiness tool:
    Fix Windows corruption errors such as 0x80070002 and 0x80070057
    If the above didn't help, please zip the following files:
    CbsPersist_20140323213151.cab
    CbsPersist_20140415214249.cab
    CbsPersist_20140418000011.cab
    CbsPersist_20140422000124.cab
    CbsPersist_20140423005328.cab
    CBS.log
    Sessions.xml
    poqexec.log
    SCM.EVM
    FilterList.log
    memory.hdmp
    minidump.mdmp
    Then upload them into onedrive and post us the link here.
    Best regards
    Michael Shao
    TechNet Community Support

Maybe you are looking for