Windows 2012 Search customization

Hello All
We are using Windows server 2012 R2 as a TS host, we control most aspects of users option via GPO, One group of users want to make use of Search option to search for files and email in a particular shared folder and mailbox, is it possible to customize the
search location? if yes, can it be achieved through GPO's?
TIA
Dev

Hi,
>>One group of users want to make use of Search option to search for files and email in a particular shared folder and mailbox, is it possible to customize the search location?
Before going further, by default, we can search in a folder and mailbox. Did you mean that we disabled the Search function for our users and then just wanted to enable the function for specific folder and mailbox? As far as I know, this can't be achieved
and group policy can't help us do this.
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

  • Windows 2012 ISO customization

    Hi All,
    I have a Windows 2012 x64 ISO, and the size of the ISO is 5.7 GB and it has the following below editions
    1. Windows 2012 Standard edition
    2. Windows 2012 Standard Core Edition
    3. Windows 2012 Datacenter Edition
    4. Windows 2012 Datacenter Core Edition
    We are trying to build a custom ISO only with 1 edition and want to reduce the ISO size by removing the 2,3,4 editions mentioned in the above table
    We just want a simple "Windows 2012 Standard Edition ISO" size needs to be reduced to a great extent
    We are using Deployment Workbench where in certain drivers, packages, updates are being incorporated into the ISO and later trying to build an ISO from it.
    When we IMPORT the OS into the Deployment Share in the workbench we see 4 editions, each edition size is around 1GB.
    We deleted the 3 editions and built a ISO media out of it but found the ISO to be around 5GB again.
    Can anyone please suggest on how to delete the editions and build a customized ISO including only "Windows 2012 Standard Edition"
    Thank you,
    Rexton

    Hi Rexton84,
    I agree with Tim, and you can export the wim edition then use Oscdimg Command-Line Options to create the ISO.
    The related KB:
    Oscdimg Command-Line Options
    http://technet.microsoft.com/en-us/library/cc749036(v=ws.10).aspx
    The related third party article:
    How to create bootable Windows 8 ISO DVD using Oscdimg.exe
    http://www.windowsvalley.com/create-bootable-windows-8-iso-dvd/#ixzz3OgXuYnam
    I’m glad to be of help to you!
    *** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these
    sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use
    of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Windows 2012 Search indexer 0x80470005

    Hello,
    I receive error code 0x80470005 from Search Indexer service. What is the problem with it?

    You might try deleting / rebuilding index. Control Panel|Indexing Options|Advanced|Rebuild
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • On Windows 2012 Terminal Server Outlook fails to connect to Exchange 2013

    I have a new install of Windows 2012.  I have two physical servers.  One is a W2012 std Domain Controller ("DC").  The Second is configured as W2012 HyperV  ("HV").  Under HV I have
    two VMs.  One VM is W2012/Exchange 2013 ("ExchVM) and the other is W2012/Terminal Server ("VMTS").  All systems are behind a firewall appliance.  Exchange is working via Outlook and OWA internally and externally.  The self
    created SSL must be installed manually on external machines since it comes up as an untrusted certificate.  Once installed remote outlook works and OWA works.  I have configured the terminal server and I am able
    to login remotely as various users under my "TS group".  The problem is when ever I attempt to open Outlook for the 1st time, it fails to connect to the exchange server.   (Open Outlook 2013, click next
    on the splash screen, "Yes" Add an Email Account splash screen, click next, Auto Account screen populates NAME and Email Address correctly, click next, Searching for mail server settings..., check on establishing network connection, check on searching
    for alias@ domain, then fails the logging on to the mail server)  The error reads:  "Outlook cannot log on.  Verify you are connected to the network and are using the proper server and mailbox name.  The
    connection to Microsoft Exchange is unavailable.  Outlook must be online or connected to complete this action."   I am connected in RDS from offsite, and from the RD session I can access shared folders on ExchVM and DC.  I have
    tried have verified the server Exchange server name is correct via "Get=ClientAccessServer" command.  I have also tried to use the guid via "Get-Mailbox
    ALIAS | fl name, exchangeguid.  Keep in mind all desktop users on the network are connecting to Outlook without issue.
    I would appreciate any thoughts on solving this issue.

    Hi,
    According to your workaround, it seems that the Outlook Anywhere configuration in Outlook client is not correct when using the Autodiscover service.
    Once you connected to Exchange server by manually settings, please run Test E-mail AutoConfiguration tool in external Outlook client to check the autodiscover service:
    open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar - Test Email AutoConfiguration. Put your email address - uncheck use guessmart and secure guessmart authentication - click Test to check your Autodiscover service.
    Please check the Log tab and confirm whether the Autodiscover service is connected successfully. Also confirm if the connection issue happens to all external users when they open Outlook for the 1st time. In Exchange server, please make sure
    autodiscover.domain.com has been included in your Exchange certificate which is assigned with IIS service.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Correct way to install SHARE POINT 2013 ON WINDOWS 2012 R2

    HI
    INSTALLING SHAREPOINT 2013 ON WINDOWS 2012 R2 IS NOT SUPPORTED , when i search for this i found a kb article
    https://support.microsoft.com/en-us/kb/2891274
    SharePoint 2013 SP1 support in Windows Server 2012 R2,
    So in windows server 2012 R2 machine i should install
    1) install sharepoint pre requisites 
    2) run sharepoint setup and install binraries
    3)and after download sharepoint 2013 SP1 and install 
    is the right steps will i do for INSTALLING SHAREPOINT 2013 ON WINDOWS 2012 R2?
    adil

    Get the SharePoint 2013 w/ SP1 ISO from the MSDN or VLSC (or Download Center if using SharePoint Foundation 2013) -- this is required for Windows Server 2012 R2, other media will not work. Follow the standard SharePoint install process, e.g. run the pre-req
    installer, and then install SharePoint.
    Once completed, install the appropriate version of SP1 for your product. See http://thesharepointfarm.com/2015/04/list-of-good-sharepoint-2013-service-pack-1-packages/
    for a list of packages.
    Trevor Seward
    Follow or contact me at...
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Windows 7 clients not Reporting Status to WSUS (downstream server) server running Windows 2012 R2

    We have recently upgraded our WSUS server to Windows 2012 R2. Now none of the PCs reporting their status to the WSUS server and not getting updates at all. The PCs are contacting the Server but not reporting their status. Stopped the Firewall on Client and
    Server. BITS and windows updates services are running. 
    Record the system time of the Windows 7 client.
    Reboot the Windows 7 client.
    Run this command from a command prompt: wuauclt /resetauthorization /detectnow.
    Wait =30= minutes.
    Performed the above steps. Please see the updates logs from a client.
    2015-03-16 12:48:44:617
    1040 15a4
    Shutdwn user declined update at shutdown
    2015-03-16 12:48:44:617
    1040 15a4
    AU Successfully wrote event for AU health state:0
    2015-03-16 12:48:44:618
    1040 15a4
    AU AU initiates service shutdown
    2015-03-16 12:48:44:649
    1040 15a4
    AU ###########  AU: Uninitializing Automatic Updates  ###########
    2015-03-16 12:48:46:506
    1040 15a4
    Report CWERReporter finishing event handling. (00000000)
    2015-03-16 12:48:46:584
    1040 15a4
    Service *********
    2015-03-16 12:48:46:584
    1040 15a4
    Service **  END  **  Service: Service exit [Exit code = 0x240001]
    2015-03-16 12:48:46:584
    1040 15a4
    Service *************
    2015-03-16 12:54:23:139
    1024 1060
    Misc ===========  Logging initialized (build: 7.6.7600.320, tz: -0400)  ===========
    2015-03-16 12:54:23:214
    1024 1060
    Misc  = Process: C:\Windows\system32\svchost.exe
    2015-03-16 12:54:23:264
    1024 1060
    Misc  = Module: c:\windows\system32\wuaueng.dll
    2015-03-16 12:54:23:139
    1024 1060
    Service *************
    2015-03-16 12:54:23:264
    1024 1060
    Service ** START **  Service: Service startup
    2015-03-16 12:54:23:265
    1024 1060
    Service *********
    2015-03-16 12:54:24:262
    1024 1060
    Agent  * WU client version 7.6.7600.320
    2015-03-16 12:54:24:263
    1024 1060
    Agent  * Base directory: C:\Windows\SoftwareDistribution
    2015-03-16 12:54:24:272
    1024 1060
    Agent  * Access type: No proxy
    2015-03-16 12:54:24:532
    1024 1060
    Agent  * Network state: Connected
    2015-03-16 12:55:17:235
    1024 1060
    Report CWERReporter::Init succeeded
    2015-03-16 12:55:17:235
    1024 1060
    Agent ***********  Agent: Initializing Windows Update Agent  ***********
    2015-03-16 12:55:17:235
    1024 1060
    Agent  * Prerequisite roots succeeded.
    2015-03-16 12:55:17:235
    1024 1060
    Agent ***********  Agent: Initializing global settings cache  ***********
    2015-03-16 12:55:17:235
    1024 1060
    Agent  * WSUS server: http://ewd-srv-01.resultstel.net:8530
    2015-03-16 12:55:17:235
    1024 1060
    Agent  * WSUS status server: http://ewd-srv-01.resultstel.net:8530
    2015-03-16 12:55:17:235
    1024 1060
    Agent  * Target group: Eastwood
    2015-03-16 12:55:17:235
    1024 1060
    Agent  * Windows Update access disabled: No
    2015-03-16 12:55:17:247
    1024 1060
    DnldMgr Download manager restoring 0 downloads
    2015-03-16 12:55:17:248
    1024 1060
    AU ###########  AU: Initializing Automatic Updates  ###########
    2015-03-16 12:55:17:249
    1024 1060
    AU  # WSUS server: http://ewd-srv-01.resultstel.net:8530
    2015-03-16 12:55:17:249
    1024 1060
    AU  # Detection frequency: 22
    2015-03-16 12:55:17:249
    1024 1060
    AU  # Target group: Eastwood
    2015-03-16 12:55:17:249
    1024 1060
    AU  # Approval type: Scheduled (Policy)
    2015-03-16 12:55:17:249
    1024 1060
    AU  # Scheduled install day/time: Every day at 3:00
    2015-03-16 12:55:17:249
    1024 1060
    AU  # Auto-install minor updates: Yes (Policy)
    2015-03-16 12:55:17:249
    1024 1060
    AU  # Will interact with non-admins (Non-admins are elevated (User preference))
    2015-03-16 12:55:17:249
    1024 1060
    AU  # Will display featured software notifications (User preference)
    2015-03-16 12:55:17:259
    1024 1060
    Agent Switching to hardware-verified ClientId.
    2015-03-16 12:55:17:260
    1024 1060
    AU Setting AU scheduled install time to 2015-03-17 07:00:00
    2015-03-16 12:55:17:402
    1024 1060
    Report ***********  Report: Initializing static reporting data  ***********
    2015-03-16 12:55:17:402
    1024 1060
    Report  * OS Version = 6.1.7601.1.0.65792
    2015-03-16 12:55:17:402
    1024 1060
    Report  * OS Product Type = 0x00000030
    2015-03-16 12:55:17:600
    1024 1060
    Report WARNING: Failed to load reporting information from WMI with hr = 80041002.
    2015-03-16 12:55:17:601
    1024 1060
    Report  * Locale ID = 1033
    2015-03-16 12:55:17:654
    1024 1060
    AU Successfully wrote event for AU health state:0
    2015-03-16 12:55:17:655
    1024 1060
    AU Initializing featured updates
    2015-03-16 12:55:17:655
    1024 1060
    AU Found 0 cached featured updates
    2015-03-16 12:55:17:655
    1024 1060
    AU Successfully wrote event for AU health state:0
    2015-03-16 12:55:17:656
    1024 1060
    AU Successfully wrote event for AU health state:0
    2015-03-16 12:55:17:656
    1024 1060
    AU AU finished delayed initialization
    2015-03-16 12:55:23:261
    1024 1194
    Report CWERReporter finishing event handling. (00000000)
    2015-03-16 12:55:41:121
    1024 1074
    AU Triggering AU detection through DetectNow API
    2015-03-16 12:55:41:122
    1024 1074
    AU Triggering Online detection (non-interactive)
    2015-03-16 12:55:41:193
    1024 1060
    AU #############
    2015-03-16 12:55:41:193
    1024 1060
    AU ## START ##  AU: Search for updates
    2015-03-16 12:55:41:193
    1024 1060
    AU #########
    2015-03-16 12:55:41:218
    1024 1060
    AU <<## SUBMITTED ## AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
    2015-03-16 12:55:41:218
    1024 1194
    Agent *************
    2015-03-16 12:55:41:218
    1024 1194
    Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2015-03-16 12:55:41:218
    1024 1194
    Agent *********
    2015-03-16 12:55:41:218
    1024 1194
    Agent  * Online = Yes; Ignore download priority = No
    2015-03-16 12:55:41:218
    1024 1194
    Agent  * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
    and DeploymentAction='Uninstallation' and RebootRequired=1"
    2015-03-16 12:55:41:218
    1024 1194
    Agent  * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2015-03-16 12:55:41:218
    1024 1194
    Agent  * Search Scope = {Machine}
    2015-03-16 12:55:41:218
    1024 1194
    Setup Checking for agent SelfUpdate
    2015-03-16 12:55:41:219
    1024 1194
    Setup Client version: Core: 7.6.7600.320  Aux: 7.6.7600.320
    2015-03-16 12:55:45:440
    1024 1194
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
    2015-03-16 12:55:45:893
    1024 1194
    Misc Microsoft signed: NA
    2015-03-16 12:55:45:897
    1024 1194
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMPD98D.tmp with dwProvFlags 0x00000080:
    2015-03-16 12:55:45:979
    1024 1194
    Misc Microsoft signed: NA
    2015-03-16 12:55:46:014
    1024 1194
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab with dwProvFlags 0x00000080:
    2015-03-16 12:55:46:019
    1024 1194
    Misc Microsoft signed: NA
    2015-03-16 12:55:46:050
    1024 1194
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab with dwProvFlags 0x00000080:
    2015-03-16 12:55:46:055
    1024 1194
    Misc Microsoft signed: NA
    2015-03-16 12:55:46:093
    1024 1194
    Setup Determining whether a new setup handler needs to be downloaded
    2015-03-16 12:55:46:093
    1024 1194
    Setup SelfUpdate handler is not found.  It will be downloaded
    2015-03-16 12:55:46:093
    1024 1194
    Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.320"
    2015-03-16 12:55:52:237
    1024 1194
    Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
    2015-03-16 12:55:52:237
    1024 1194
    Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320"
    2015-03-16 12:55:53:377
    1024 1194
    Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
    2015-03-16 12:55:53:502
    1024 1194
    Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320"
    2015-03-16 12:55:56:705
    1024 1194
    Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
    2015-03-16 12:55:56:896
    1024 1194
    Setup SelfUpdate check completed.  SelfUpdate is NOT required.
    2015-03-16 12:56:01:618
    1024 1060
    AU AU received policy change subscription event
    2015-03-16 13:00:00:824
    1024 1194
    PT +++++++++++  PT: Synchronizing server updates  +++++++++++
    2015-03-16 13:00:00:824
    1024 1194
    PT  + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://ewd-srv-01.resultstel.net:8530/ClientWebService/client.asmx
    2015-03-16 13:00:01:001
    1024 1194
    PT WARNING: PTError: 0x80041002
    2015-03-16 13:00:01:001
    1024 1194
    PT Initializing simple targeting cookie, clientId = f86ac648-7394-46eb-8f40-eb605f77d86b, target group = Eastwood, DNS name = ewd-wc-420-235.resultstel.net
    2015-03-16 13:00:01:001
    1024 1194
    PT  Server URL = http://ewd-srv-01.resultstel.net:8530/SimpleAuthWebService/SimpleAuth.asmx
    2015-03-16 13:00:01:833
    1024 1194
    Agent WARNING: Failed to evaluate Installed rule, updateId = {F92A18E7-8784-4828-89C9-F80085A422A7}.202, hr = 80041002
    2015-03-16 13:00:02:004
    1024 1194
    Agent WARNING: Failed to evaluate Installed rule, updateId = {C735DBB1-06B4-49F2-815F-97976B4B86A4}.102, hr = 80041002
    2015-03-16 13:00:08:676
    1024 1194
    Agent WARNING: Failed to evaluate Installed rule, updateId = {6A8FE277-1048-48B1-803B-4580C15BBDF1}.100, hr = 80041002
    2015-03-16 13:07:37:795
    1024 1194
    PT +++++++++++  PT: Synchronizing extended update info  +++++++++++
    2015-03-16 13:07:37:795
    1024 1194
    PT  + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://ewd-srv-01.resultstel.net:8530/ClientWebService/client.asmx
    2015-03-16 13:07:37:988
    1024 1194
    PT WARNING: PTError: 0x80041002
    2015-03-16 13:07:41:893
    1024 1194
    PT WARNING: GetExtendedUpdateInfo failure, error = 0x8024400E, soap client error = 7, soap error code = 400, HTTP status code = 200
    2015-03-16 13:07:41:893
    1024 1194
    PT WARNING: SOAP Fault: 0x000190
    2015-03-16 13:07:41:893
    1024 1194
    PT WARNING:     faultstring:Fault occurred
    2015-03-16 13:07:41:893
    1024 1194
    PT WARNING:     ErrorCode:InternalServerError(5)
    2015-03-16 13:07:41:893
    1024 1194
    PT WARNING:     Message:(null)
    2015-03-16 13:07:41:893
    1024 1194
    PT WARNING:     Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetExtendedUpdateInfo"
    2015-03-16 13:07:41:893
    1024 1194
    PT WARNING:     ID:4cd69d60-d69b-4591-88ad-5687cdda3265
    2015-03-16 13:07:41:893
    1024 1194
    PT WARNING: PTError: 0x8024400e
    2015-03-16 13:07:41:893
    1024 1194
    PT WARNING: GetExtendedUpdateInfo_WithRecovery: 0x8024400e
    2015-03-16 13:07:41:893
    1024 1194
    PT WARNING: Sync of Extended Info: 0x8024400e
    2015-03-16 13:07:41:893
    1024 1194
    PT WARNING: SyncServerUpdatesInternal failed : 0x8024400e
    2015-03-16 13:07:41:914
    1024 1194
    Agent  * WARNING: Exit code = 0x8024400E
    2015-03-16 13:07:41:914
    1024 1194
    Agent *********
    2015-03-16 13:07:41:914
    1024 1194
    Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2015-03-16 13:07:41:914
    1024 1194
    Agent *************
    2015-03-16 13:07:41:914
    1024 1194
    Agent WARNING: WU client failed Searching for update with error 0x8024400e
    2015-03-16 13:07:41:929
    1024 1194
    Report CWERReporter finishing event handling. (00000000)
    2015-03-16 13:07:41:929
    1024 1194
    Report CWERReporter finishing event handling. (00000000)
    2015-03-16 13:07:41:929
    1024 1194
    Report CWERReporter finishing event handling. (00000000)
    2015-03-16 13:07:41:929
    1024 1194
    Report CWERReporter finishing event handling. (00000000)
    2015-03-16 13:07:41:929
    1024 1194
    Report CWERReporter finishing event handling. (00000000)
    2015-03-16 13:07:41:929
    1024 1194
    Report CWERReporter finishing event handling. (00000000)
    2015-03-16 13:07:41:930
    1024 1194
    Report CWERReporter finishing event handling. (00000000)
    2015-03-16 13:07:41:930
    1024 1194
    Report CWERReporter finishing event handling. (00000000)
    2015-03-16 13:07:42:021
    1024 14f4
    AU >>##  RESUMED  ## AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
    2015-03-16 13:07:42:021
    1024 14f4
    AU  # WARNING: Search callback failed, result = 0x8024400E
    2015-03-16 13:07:42:021
    1024 14f4
    AU  # WARNING: Failed to find updates with error code 8024400E
    2015-03-16 13:07:42:021
    1024 14f4
    AU #########
    2015-03-16 13:07:42:021
    1024 14f4
    AU ##  END  ##  AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
    2015-03-16 13:07:42:021
    1024 14f4
    AU #############
    2015-03-16 13:07:42:021
    1024 14f4
    AU Successfully wrote event for AU health state:0
    2015-03-16 13:07:42:021
    1024 14f4
    AU AU setting next detection timeout to 2015-03-16 22:07:42
    2015-03-16 13:07:42:022
    1024 14f4
    AU Setting AU scheduled install time to 2015-03-17 07:00:00
    2015-03-16 13:07:42:022
    1024 14f4
    AU Successfully wrote event for AU health state:0
    2015-03-16 13:07:42:022
    1024 14f4
    AU Successfully wrote event for AU health state:0
    2015-03-16 13:07:46:919
    1024 1194
    Report REPORT EVENT: {CB48FD20-D762-4E5E-8CCA-5C27F3CFA04A}
    2015-03-16 13:07:41:913-0400 1
    148 101
    {00000000-0000-0000-0000-000000000000}
    0 8024400e
    AutomaticUpdates Failure
    Software Synchronization Windows Update Client failed to detect with error 0x8024400e.
    2015-03-16 13:07:47:022
    1024 1194
    Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
    2015-03-16 13:07:47:022
    1024 1194
    Report WER Report sent: 7.6.7600.320 0x8024400e 00000000-0000-0000-0000-000000000000 Scan 101 Managed
    2015-03-16 13:07:47:022
    1024 1194
    Report CWERReporter finishing event handling. (00000000)
    2015-03-16 13:14:23:923
    1024 1194
    PT WARNING: PTError: 0x80041002
    2015-03-16 13:14:23:923
    1024 1194
    Report Uploading 1 events using cached cookie, reporting URL = http://ewd-srv-01.resultstel.net:8530/ReportingWebService/ReportingWebService.asmx

    Don thank you for the reply.
    But I do have the same issue on the other PCs as well on which WMI is good. And also i pointed the above PC to my primary WSUS server which is running windows 2003 and it reported successfully and downloaded the approved updates.
    please see the below logs from the same PC after pointing to our wsus running on win2003.
    2015-03-17 14:41:08:507
    1020 f1c
    Inv   # Talking to WSUS server = http://atl-wsus-1:8530
    2015-03-17 14:41:08:508
    1020 f1c
    Inv   # Downloading Rule file from = http://atl-wsus-1:8530/Inventory/InventoryRules.cab
    2015-03-17 14:41:08:508
    1020 53c
    AU #########
    2015-03-17 14:41:08:508
    1020 53c
    AU ##  END  ##  AU: Search for updates [CallId = {54490DE2-CF7B-4017-A553-6C8C1532E621}]
    2015-03-17 14:41:08:508
    1020 53c
    AU #############
    2015-03-17 14:41:08:510
    1020 53c
    AU Successfully wrote event for AU health state:0
    2015-03-17 14:41:08:510
    1020 53c
    AU Featured notifications is disabled.
    2015-03-17 14:41:08:510
    1020 53c
    AU AU setting next detection timeout to 2015-03-18 16:13:54
    2015-03-17 14:41:08:510
    1020 53c
    AU Setting AU scheduled install time to 2015-03-18 07:00:00
    2015-03-17 14:41:08:510
    1020 53c
    AU Successfully wrote event for AU health state:0
    2015-03-17 14:41:08:510
    1020 53c
    AU Auto-approving update for download, updateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
    2015-03-17 14:41:08:510
    1020 53c
    AU Auto-approving update for download, updateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
    2015-03-17 14:41:08:510
    1020 53c
    AU Auto-approving update for download, updateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
    2015-03-17 14:41:08:510
    1020 53c
    AU Auto-approving update for download, updateId = {6C2547EE-DC7B-4080-8884-A040572C5EC4}.204, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
    2015-03-17 14:41:08:510
    1020 53c
    AU Auto-approving update for download, updateId = {673027F3-841E-4215-88BE-A0BFB456B2B1}.207, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
    2015-03-17 14:41:08:510
    1020 53c
    AU Auto-approved 5 update(s) for download (NOT for Ux)
    2015-03-17 14:41:08:510
    1020 53c
    AU #############
    2015-03-17 14:41:08:511
    1020 53c
    AU ## START ##  AU: Download updates
    2015-03-17 14:41:08:511
    1020 53c
    AU #########
    2015-03-17 14:41:08:511
    1020 53c
    AU   # Approved updates = 5
    2015-03-17 14:41:08:512
    1020 53c
    AU AU initiated download, updateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202, callId = {F3389077-03F0-4625-83EF-CAAEBA8ED147}
    2015-03-17 14:41:08:513
    1020 53c
    AU AU initiated download, updateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203, callId = {B94BF4E5-5709-4D22-924A-5C5B8D4712C9}
    2015-03-17 14:41:08:514
    1020 53c
    AU AU initiated download, updateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203, callId = {D330B2E0-CA38-4ED9-894A-36717C01F09A}
    2015-03-17 14:41:08:515
    1020 53c
    AU AU initiated download, updateId = {6C2547EE-DC7B-4080-8884-A040572C5EC4}.204, callId = {B6B35AC2-9BC1-4CFA-8421-D666C79464AD}
    2015-03-17 14:41:08:516
    1020 53c
    AU AU initiated download, updateId = {673027F3-841E-4215-88BE-A0BFB456B2B1}.207, callId = {F0D00A6F-36BC-4680-9BE4-4005742A2C93}
    2015-03-17 14:41:08:516
    1020 53c
    AU Setting AU scheduled install time to 2015-03-18 07:00:00
    2015-03-17 14:41:08:516
    1020 53c
    AU Successfully wrote event for AU health state:0
    2015-03-17 14:41:08:516
    1020 53c
    AU AU setting pending client directive to 'Download Progress'
    2015-03-17 14:41:08:518
    1020 53c
    AU Successfully wrote event for AU health state:0
    2015-03-17 14:41:08:518
    1020 53c
    AU   # Pending download calls = 5
    2015-03-17 14:41:08:518
    1020 53c
    AU <<## SUBMITTED ## AU: Download updates
    2015-03-17 14:41:08:520
    1020 53c
    AU Successfully wrote event for AU health state:0
    2015-03-17 14:41:08:964
    1020 f1c
    Misc Validating signature for C:\Windows\SoftwareDistribution\Inventory\InventoryRule\InventoryRules.cab with dwProvFlags 0x00000080:
    2015-03-17 14:41:08:976
    1020 f1c
    Misc  Microsoft signed: NA
    2015-03-17 14:41:08:993
    1020 f1c
    Inv   # Inventory Rule id = 8226C3A1-70D4-4848-B441-1555AC820A23, version = 1.0
    2015-03-17 14:41:09:022
    1020 f1c
    Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
    2015-03-17 14:41:09:086
    1020 f1c
    Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
    2015-03-17 14:41:09:118
    1020 f1c
    Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
    2015-03-17 14:41:09:150
    1020 f1c
    Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
    2015-03-17 14:41:09:182
    1020 f1c
    Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
    2015-03-17 14:41:09:214
    1020 f1c
    Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
    2015-03-17 14:41:09:246
    1020 f1c
    Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
    2015-03-17 14:41:09:278
    1020 f1c
    Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
    2015-03-17 14:41:09:310
    1020 f1c
    Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
    2015-03-17 14:41:09:342
    1020 f1c
    Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
    2015-03-17 14:41:09:374
    1020 f1c
    Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
    2015-03-17 14:41:09:406
    1020 f1c
    Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
    2015-03-17 14:41:09:438
    1020 f1c
    Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
    2015-03-17 14:41:09:471
    1020 f1c
    PT WARNING: PTError: 0x80041002
    2015-03-17 14:41:10:590
    1020 f1c
    Inv #########
    2015-03-17 14:41:10:590
    1020 f1c
    Inv ##  END  ##  Inv: Inventory Collection
    2015-03-17 14:41:10:590
    1020 f1c
    Inv #############
    2015-03-17 14:41:10:592
    1020 f1c
    DnldMgr *************
    2015-03-17 14:41:10:592
    1020 f1c
    DnldMgr ** START **  DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
    2015-03-17 14:41:10:592
    1020 f1c
    DnldMgr *********
    2015-03-17 14:41:10:592
    1020 f1c
    DnldMgr   * Call ID = {F3389077-03F0-4625-83EF-CAAEBA8ED147}
    2015-03-17 14:41:10:592
    1020 f1c
    DnldMgr   * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
    2015-03-17 14:41:10:592
    1020 f1c
    DnldMgr   * Updates to download = 1
    2015-03-17 14:41:10:592
    1020 f1c
    Agent   *   Title = Security Update for Windows 7 (KB3029944)
    2015-03-17 14:41:10:592
    1020 f1c
    Agent   *   UpdateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202
    2015-03-17 14:41:10:592
    1020 f1c
    Agent   *     Bundles 1 updates:
    2015-03-17 14:41:10:592
    1020 f1c
    Agent   *       {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202
    2015-03-17 14:41:10:598
    1020 f1c
    DnldMgr ***********  DnldMgr: New download job [UpdateId = {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202]  ***********
    2015-03-17 14:41:10:599
    1020 f1c
    DnldMgr   * Queueing update for download handler request generation.
    2015-03-17 14:41:10:599
    1020 f1c
    DnldMgr Generating download request for update {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202
    2015-03-17 14:41:13:863
    1020 f1c
    Handler Generating request for CBS update CF9A0A9F-EA32-4B84-8B11-647F8DE3432C in sandbox C:\Windows\SoftwareDistribution\Download\4fa5441bcc144c4a7917304858841f6b
    2015-03-17 14:41:13:863
    1020 f1c
    Handler Selected payload type is ptExpress
    2015-03-17 14:41:13:863
    1020 f1c
    Handler Detected download state is dsStart
    2015-03-17 14:41:13:863
    1020 f1c
    Handler Adding windows6.1-kb3029944-x86-express.cab (entire file) to request list.
    2015-03-17 14:41:13:864
    1020 f1c
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0 
    2015-03-17 14:41:13:864
    1020 f1c
    DnldMgr ***********  DnldMgr: New download job [UpdateId = {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202]  ***********
    2015-03-17 14:41:16:436
    1020 f1c
    DnldMgr   * BITS job initialized, JobId = {675985CD-3133-4157-9D02-06CC33C29C49}
    2015-03-17 14:41:16:473
    1020 f1c
    DnldMgr   * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2015/01/windows6.1-kb3029944-x86-express_0c21886fd0931285b2d3a29773d3673c947f60b3.cab to C:\Windows\SoftwareDistribution\Download\4fa5441bcc144c4a7917304858841f6b\windows6.1-kb3029944-x86-express.cab
    (full file).
    2015-03-17 14:41:16:644
    1020 f1c
    Agent *********
    2015-03-17 14:41:16:644
    1020 f1c
    Agent **  END  **  Agent: Downloading updates [CallerId = AutomaticUpdates]
    2015-03-17 14:41:16:644
    1020 f1c
    Agent *************
    2015-03-17 14:41:16:645
    1020 f1c
    DnldMgr *************
    2015-03-17 14:41:16:645
    1020 f1c
    DnldMgr ** START **  DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
    2015-03-17 14:41:16:645
    1020 f1c
    DnldMgr *********
    2015-03-17 14:41:16:645
    1020 f1c
    DnldMgr   * Call ID = {B94BF4E5-5709-4D22-924A-5C5B8D4712C9}
    2015-03-17 14:41:16:645
    1020 f1c
    DnldMgr   * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
    2015-03-17 14:41:16:645
    1020 f1c
    DnldMgr   * Updates to download = 1
    2015-03-17 14:41:16:645
    1020 f1c
    Agent   *   Title = Security Update for Windows 7 (KB3004361)
    2015-03-17 14:41:16:645
    1020 f1c
    Agent   *   UpdateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203
    2015-03-17 14:41:16:645
    1020 f1c
    Agent   *     Bundles 1 updates:
    2015-03-17 14:41:16:645
    1020 f1c
    Agent   *       {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203
    2015-03-17 14:41:16:648
    1020 f1c
    DnldMgr ***********  DnldMgr: New download job [UpdateId = {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203]  ***********
    2015-03-17 14:41:16:649
    1020 f1c
    DnldMgr   * Queueing update for download handler request generation.
    2015-03-17 14:41:16:649
    1020 f1c
    DnldMgr Generating download request for update {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203
    2015-03-17 14:41:16:678
    1020 f1c
    Handler Generating request for CBS update 151B27A0-4EA8-428F-BE06-C90A3CF0C2CA in sandbox C:\Windows\SoftwareDistribution\Download\963019da42f4a0388fdc4337be401b25
    2015-03-17 14:41:16:678
    1020 f1c
    Handler Selected payload type is ptExpress
    2015-03-17 14:41:16:678
    1020 f1c
    Handler Detected download state is dsStart
    2015-03-17 14:41:16:678
    1020 f1c
    Handler Adding windows6.1-kb3004361-x86-express.cab (entire file) to request list.
    2015-03-17 14:41:16:687
    1020 f1c
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0 
    2015-03-17 14:41:16:687
    1020 f1c
    DnldMgr ***********  DnldMgr: New download job [UpdateId = {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203]  ***********
    2015-03-17 14:41:16:732
    1020 f1c
    DnldMgr   * BITS job initialized, JobId = {27F85F04-0E56-4BFA-93E3-4D6BCB3ECB4F}
    2015-03-17 14:41:16:758
    1020 f1c
    DnldMgr   * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2014/12/windows6.1-kb3004361-x86-express_47f37958063afd2521ca42de8904b55d1aa85b89.cab to C:\Windows\SoftwareDistribution\Download\963019da42f4a0388fdc4337be401b25\windows6.1-kb3004361-x86-express.cab
    (full file).
    2015-03-17 14:41:16:809
    1020 f1c
    Agent *********
    2015-03-17 14:41:16:809
    1020 f1c
    Agent **  END  **  Agent: Downloading updates [CallerId = AutomaticUpdates]
    2015-03-17 14:41:16:809
    1020 f1c
    Agent *************
    2015-03-17 14:41:16:811
    1020 f1c
    DnldMgr *************
    2015-03-17 14:41:16:811
    1020 f1c
    DnldMgr ** START **  DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
    2015-03-17 14:41:16:811
    1020 f1c
    DnldMgr *********
    2015-03-17 14:41:16:811
    1020 f1c
    DnldMgr   * Call ID = {D330B2E0-CA38-4ED9-894A-36717C01F09A}
    2015-03-17 14:41:16:811
    1020 f1c
    DnldMgr   * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
    2015-03-17 14:41:16:811
    1020 f1c
    DnldMgr   * Updates to download = 1
    2015-03-17 14:41:16:811
    1020 f1c
    Agent   *   Title = Security Update for Windows 7 (KB3031432)
    2015-03-17 14:41:16:811
    1020 f1c
    Agent   *   UpdateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203
    2015-03-17 14:41:16:811
    1020 f1c
    Agent   *     Bundles 1 updates:
    2015-03-17 14:41:16:811
    1020 f1c
    Agent   *       {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203
    2015-03-17 14:41:16:814
    1020 f1c
    DnldMgr ***********  DnldMgr: New download job [UpdateId = {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203]  ***********
    2015-03-17 14:41:16:815
    1020 f1c
    DnldMgr   * Queueing update for download handler request generation.
    2015-03-17 14:41:16:815
    1020 f1c
    DnldMgr Generating download request for update {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203
    2015-03-17 14:41:16:843
    1020 f1c
    Handler Generating request for CBS update EE556F37-7EAC-42B3-BD29-653F98E6E364 in sandbox C:\Windows\SoftwareDistribution\Download\7db602a9c625e53b175ecb83170441ba
    2015-03-17 14:41:16:843
    1020 f1c
    Handler Selected payload type is ptExpress
    2015-03-17 14:41:16:843
    1020 f1c
    Handler Detected download state is dsStart
    2015-03-17 14:41:16:843
    1020 f1c
    Handler Adding windows6.1-kb3031432-x86-express.cab (entire file) to request list.
    2015-03-17 14:41:16:844
    1020 f1c
    Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0 
    2015-03-17 14:41:16:845
    1020 f1c
    DnldMgr ***********  DnldMgr: New download job [UpdateId = {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203]  ***********
    2015-03-17 14:41:16:881
    1020 f1c
    DnldMgr   * BITS job initialized, JobId = {6C5B3B60-DB8B-4B6F-9E40-D99CA43B366D}
    2015-03-17 14:41:16:906
    1020 f1c
    DnldMgr   * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2015/01/windows6.1-kb3031432-x86-express_fb5326e90facfe6de39cf44fc4ed5ec630968ba5.cab to C:\Windows\SoftwareDistribution\Download\7db602a9c625e53b175ecb83170441ba\windows6.1-kb3031432-x86-express.cab
    (full file).

  • Windows 2008 r2 guests blue screen on Windows 2012 R2 Hyper-V Cluster with e5 2670-v2 processors

    Hello all,
    We have a new hyper-v infrastructure deployed in two brand new Dell R720 Servers with 384GB of Memory and dual Intel e5 2670-v2 processors. This infrastructure is replacing an existing hyper-v 2008 R2 and all the guests are being migrated to this new cluster.
    The issue we are seeing is our 2008 r2 guests blue screening ocasionally with 0x0000001a,0x0000004e or 0x00000050 bugchecks.
    All this guests are configured with dynamic memory and with the integration components up to date. These same guests were running with no problems in the hyper-v 2008r2 cluster.
    When searching i found this article from vmware that pretty much describes what we are facing:
    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2073791
    Are you aware of the same problem with this kindd of hardware on windows 2012 r2 hyper-v?
    Thanks!
    Nuno Carvalho

    Meanwhile i found this May 2014 update on the intel specification of the CPU we are using:
    CA135 Incorrect Page Translation when EPT is enabled
    Problem:
    If EPT (Extended Page Tables) is enabled, then a complex sequence of internal processor events may result in unexpected page faults or use of incorrect page translations.
    Implication:
    Due to this erratum a guest may crash or experience unpredictable system behavior.
    Workaround:
    It is possible for the BIOS to contain a workaround for this erratum.
    Status:
    For the affected steppings, see the
    Summary Tables of Changes.
    This affects VMware as of the today update of the article i referenced in the first post, what about hyper-v?
    http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/xeon-e5-v2-spec-update.pdf
    Nuno Carvalho

  • Netlogon and SYSVOL shares are not created after DCPROMO in Windows 2012

    Hi
    When i run a dcpromo on my windows 2012 server (all dc's are windows 2012)
    On the new domain controller i don't have sysvol or netlogon share.
    All the sugestions i found in social refer to FRS but in server 2012 DFS is used, no idea how to troubel shoot this problem.
    All dcdiag on all DC before promo where clean
    dcidag on srv01 the new dc shows:
    Doing initial required tests
       Testing server: Bas\SRV01
          Starting test: Connectivity
             ......................... SRV01 passed test Connectivity
    Doing primary tests
       Testing server: Bas\SRV01
          Starting test: Advertising
             Warning: DsGetDcName returned information for
             \\SRV09.dikkenberg.local, when we were trying to reach SRV01.
             SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
             ......................... SRV01 failed test Advertising
          Starting test: FrsEvent
             ......................... SRV01 passed test FrsEvent
          Starting test: DFSREvent
             There are warning or error events within the last 24 hours after the
             SYSVOL has been shared.  Failing SYSVOL replication problems may cause
             Group Policy problems.
             ......................... SRV01 passed test DFSREvent
          Starting test: SysVolCheck
             ......................... SRV01 passed test SysVolCheck
          Starting test: KccEvent
             ......................... SRV01 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             ......................... SRV01 passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... SRV01 passed test MachineAccount
          Starting test: NCSecDesc
             ......................... SRV01 passed test NCSecDesc
          Starting test: NetLogons
             Unable to connect to the NETLOGON share! (\\SRV01\netlogon)
             [SRV01] An net use or LsaPolicy operation failed with error 67,
             The network name cannot be found..
             ......................... SRV01 failed test NetLogons
          Starting test: ObjectsReplicated
             ......................... SRV01 passed test ObjectsReplicated
          Starting test: Replications
             ......................... SRV01 passed test Replications
          Starting test: RidManager
             ......................... SRV01 passed test RidManager
          Starting test: Services
             ......................... SRV01 passed test Services
          Starting test: SystemLog
             A warning event occurred.  EventID: 0x000727A5
                Time Generated: 02/26/2013   21:55:22
                Event String:
                The WinRM service is not listening for WS-Management requests.
             An error event occurred.  EventID: 0x00001001
                Time Generated: 02/26/2013   21:58:10
                Event String:
                The machine SRV01 attempted to join the domain dikkenberg.local but
    failed. The error code was 1332.
             A warning event occurred.  EventID: 0x000727A5
                Time Generated: 02/26/2013   22:00:04
                Event String:
                The WinRM service is not listening for WS-Management requests.
             A warning event occurred.  EventID: 0x000727A5
                Time Generated: 02/26/2013   22:08:43
                Event String:
                The WinRM service is not listening for WS-Management requests.
             A warning event occurred.  EventID: 0x0000008E
                Time Generated: 02/26/2013   22:10:22
                Event String:
                The time service has stopped advertising as a time source because th
    e local clock is not synchronized.
             A warning event occurred.  EventID: 0x00001796
                Time Generated: 02/26/2013   22:24:05
                Event String:
                Microsoft Windows Server has detected that NTLM authentication is pr
    esently being used between clients and this server. This event occurs once per b
    oot of the server on the first time a client uses NTLM with this server.
             ......................... SRV01 failed test SystemLog
          Starting test: VerifyReferences
             ......................... SRV01 passed test VerifyReferences
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : dikkenberg
          Starting test: CheckSDRefDom
             ......................... dikkenberg passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... dikkenberg passed test CrossRefValidation
       Running enterprise tests on : dikkenberg.local
          Starting test: LocatorCheck
             ......................... dikkenberg.local passed test LocatorCheck
          Starting test: Intersite
             ......................... dikkenberg.local passed test Intersite
    C:\Users\administrator.DIKKENBERG>
    Dcdiag on good dc:
    Performing initial setup:
       Trying to find home server...
       Home Server = SRV09
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Bas\SRV09
          Starting test: Connectivity
             ......................... SRV09 passed test Connectivity
    Doing primary tests
       Testing server: Bas\SRV09
          Starting test: Advertising
             ......................... SRV09 passed test Advertising
          Starting test: FrsEvent
             ......................... SRV09 passed test FrsEvent
          Starting test: DFSREvent
             There are warning or error events within the last 24 hours after the
             SYSVOL has been shared.  Failing SYSVOL replication problems may cause
             Group Policy problems.
             ......................... SRV09 passed test DFSREvent
          Starting test: SysVolCheck
             ......................... SRV09 passed test SysVolCheck
          Starting test: KccEvent
             A warning event occurred.  EventID: 0x80000B46
                Time Generated: 02/26/2013   22:42:36
                Event String:
                The security of this directory server can be significantly enhanced
    by configuring the server to reject SASL (Negotiate,  Kerberos, NTLM, or Digest)
     LDAP binds that do not request signing (integrity verification) and LDAP simple
     binds that  are performed on a cleartext (non-SSL/TLS-encrypted) connection.  E
    ven if no clients are using such binds, configuring the server to reject them wi
    ll improve the security of this server.
             ......................... SRV09 passed test KccEvent
          Starting test: KnowsOfRoleHolders
             ......................... SRV09 passed test KnowsOfRoleHolders
          Starting test: MachineAccount
             ......................... SRV09 passed test MachineAccount
          Starting test: NCSecDesc
             ......................... SRV09 passed test NCSecDesc
          Starting test: NetLogons
             ......................... SRV09 passed test NetLogons
          Starting test: ObjectsReplicated
             ......................... SRV09 passed test ObjectsReplicated
          Starting test: Replications
             ......................... SRV09 passed test Replications
          Starting test: RidManager
             ......................... SRV09 passed test RidManager
          Starting test: Services
             ......................... SRV09 passed test Services
          Starting test: SystemLog
             An error event occurred.  EventID: 0x00000457
                Time Generated: 02/26/2013   21:57:13
                Event String:
                Driver Samsung CLP-320 Series required for printer Samsung CLP-320 S
    eries is unknown. Contact the administrator to install the driver before you log
     in again.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 02/26/2013   21:57:13
                Event String:
                Driver DYMO LabelWriter 400 Turbo required for printer DYMO LabelWri
    ter 400 Turbo is unknown. Contact the administrator to install the driver before
     you log in again.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 02/26/2013   21:57:13
                Event String:
                Driver Send to Microsoft OneNote 15 Driver required for printer Verz
    enden naar OneNote 2013 is unknown. Contact the administrator to install the dri
    ver before you log in again.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 02/26/2013   21:57:14
                Event String:
                Driver Microsoft XPS Document Writer required for printer Microsoft
    XPS Document Writer is unknown. Contact the administrator to install the driver
    before you log in again.
             A warning event occurred.  EventID: 0x000016AF
                Time Generated: 02/26/2013   22:34:50
                Event String:
                During the past 4.24 hours there have been 20 connections to this Do
    main Controller from client machines whose IP addresses don't map to any of the
    existing sites in the enterprise. Those clients, therefore, have undefined sites
     and may connect to any Domain Controller including those that are in far distan
    t locations from the clients. A client's site is determined by the mapping of it
    s subnet to one of the existing sites. To move the above clients to one of the s
    ites, please consider creating subnet object(s) covering the above IP addresses
    with mapping to one of the existing sites.  The names and IP addresses of the cl
    ients in question have been logged on this computer in the following log file '%
    SystemRoot%\debug\netlogon.log' and, potentially, in the log file '%SystemRoot%\
    debug\netlogon.bak' created if the former log becomes full. The log(s) may conta
    in additional unrelated debugging information. To filter out the needed informat
    ion, please search for lines which contain text 'NO_CLIENT_SITE:'. The first wor
    d after this string is the client name and the second word is the client IP addr
    ess. The maximum size of the log(s) is controlled by the following registry DWOR
    D value 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameter
    s\LogFileMaxSize'; the default is 20000000 bytes.  The current maximum size is 2
    0000000 bytes.  To set a different maximum size, create the above registry value
     and set the desired maximum size in bytes.
             A warning event occurred.  EventID: 0x0000000B
                Time Generated: 02/26/2013   22:42:06
                Event String:
                Custom dynamic link libraries are being loaded for every application
    . The system administrator should review the list of libraries to ensure they ar
    e related to trusted applications. Please visit http://support.microsoft.com/kb/
    197571 for more information.
             A warning event occurred.  EventID: 0x000727AA
                Time Generated: 02/26/2013   22:43:09
                Event String:
                The WinRM service failed to create the following SPNs: WSMAN/SRV09.d
    ikkenberg.local; WSMAN/SRV09.
             A warning event occurred.  EventID: 0x000003F6
                Time Generated: 02/26/2013   22:43:11
                Event String:
                Name resolution for the name _msdcs.dikkenberg.local timed out after
     none of the configured DNS servers responded.
             A warning event occurred.  EventID: 0x000003F6
                Time Generated: 02/26/2013   22:43:11
                Event String:
                Name resolution for the name dikkenberg.local timed out after none o
    f the configured DNS servers responded.
             A warning event occurred.  EventID: 0x0000000C
                Time Generated: 02/26/2013   22:43:13
                Event String:
                Time Provider NtpClient: This machine is configured to use the domai
    n hierarchy to determine its time source, but it is the AD PDC emulator for the
    domain at the root of the forest, so there is no machine above it in the domain
    hierarchy to use as a time source. It is recommended that you either configure a
     reliable time service in the root domain, or manually configure the AD PDC to s
    ynchronize with an external time source. Otherwise, this machine will function a
    s the authoritative time source in the domain hierarchy. If an external time sou
    rce is not configured or used for this computer, you may choose to disable the N
    tpClient.
             A warning event occurred.  EventID: 0x00001796
                Time Generated: 02/26/2013   22:43:50
                Event String:
                Microsoft Windows Server has detected that NTLM authentication is pr
    esently being used between clients and this server. This event occurs once per b
    oot of the server on the first time a client uses NTLM with this server.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 02/26/2013   22:44:12
                Event String:
                Driver Samsung CLP-320 Series required for printer Samsung CLP-320 S
    eries is unknown. Contact the administrator to install the driver before you log
     in again.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 02/26/2013   22:44:16
                Event String:
                Driver Send to Microsoft OneNote 15 Driver required for printer Verz
    enden naar OneNote 2013 is unknown. Contact the administrator to install the dri
    ver before you log in again.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 02/26/2013   22:44:16
                Event String:
                Driver DYMO LabelWriter 400 Turbo required for printer DYMO LabelWri
    ter 400 Turbo is unknown. Contact the administrator to install the driver before
     you log in again.
             An error event occurred.  EventID: 0x00000457
                Time Generated: 02/26/2013   22:44:17
                Event String:
                Driver Microsoft XPS Document Writer required for printer Microsoft
    XPS Document Writer is unknown. Contact the administrator to install the driver
    before you log in again.
             ......................... SRV09 failed test SystemLog
          Starting test: VerifyReferences
             ......................... SRV09 passed test VerifyReferences
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test
             CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test
             CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : dikkenberg
          Starting test: CheckSDRefDom
             ......................... dikkenberg passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... dikkenberg passed test CrossRefValidation
       Running enterprise tests on : dikkenberg.local
          Starting test: LocatorCheck
             ......................... dikkenberg.local passed test LocatorCheck
          Starting test: Intersite
             ......................... dikkenberg.local passed test Intersite
    With kind regards, Bas van den Dikkenberg

    Doing primary tests
       Testing server: Bas\SRV01
          Starting test: Advertising
             Warning: DsGetDcName returned information for
             \\SRV09.dikkenberg.local, when we were trying to reach SRV01.
             SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
             ......................... SRV01 failed test Advertising
    "SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE"
    this error means that the DC is in USN rollback state.
    srv01 is not usn rollback see:
    test from other DC:
    Doing primary tests
       Testing server: Ouders\SRV10
          Starting test: Advertising
             ......................... SRV10 passed test Advertising
          Starting test: FrsEvent
             ......................... SRV10 passed test FrsEvent
    Test from srv09:
    Doing primary tests
       Testing server: Bas\SRV09
          Starting test: Advertising
             ......................... SRV09 passed test Advertising
          Starting test: FrsEvent
             ......................... SRV09 passed test FrsEvent
    With kind regards, Bas van den Dikkenberg

  • Windows 2012 answer file and DVD drive letter

    Hi
    my question is about applying unattend XML file into a Wim file. I have read other thread here but still I  can't get it to work. so here is the situation:
    I have installed windows 2012  then I have SYSPREPed it and then I created a WIM file with DISM tool and then I have a very simple answer file. I use DISM to mount the image and then use DISM /apply-unattend to push my answerfile into my WIM file. now
    the issue is, when I load this image into a VM using DISM tool, everything goes fine and when the server comes up for the first time I see the language setting page asking for "Country or region" and "App Language" and "keyboard layout"
    when I hit next , it asks for license agreement and after confirming that one, I can login to windows. How I can hide those 2 windows. my small answer files is :
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
        <settings pass="windowsPE">
            <component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
    xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <SetupUILanguage>
    <UILanguage>en-US</UILanguage>
                    <WillShowUI>Never</WillShowUI>
                </SetupUILanguage>
                <InputLocale>en-US</InputLocale>
                <SystemLocale>en-US</SystemLocale>
                <UILanguage>en-US</UILanguage>
                <UserLocale>en-US</UserLocale>
            </component>
            <component name="Microsoft-Windows-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <UserData>
                    <AcceptEula>true</AcceptEula>
                </UserData>
            </component>
        </settings>
        <settings pass="specialize">
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <TimeZone>Mountain Standard Time</TimeZone>
            </component>
        </settings>
        <settings pass="oobeSystem">
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <TimeZone>Mountain Standard TIme</TimeZone>
            </component>
        </settings>
        <cpi:offlineImage cpi:source="wim:c:/win2012/install.wim#Windows Server 2012 R2 SERVERSTANDARD" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    </unattend>
    can somebody please let me know what am I doing wrong? I was assuming after applying unattanded xml file, when I do DISM /apply-image it gonna use my answer file....
    I have one more question as well:
    in 2012, I change DVD drive letter from D to Z and then I sysprep it. in target VM when I load my image, DVD drive is D again.
    I guess when sysprep generalize everything, DVD drive get detected again and windows assign first available letter to it. my second question is : is there any way to make drive letter setting stays the same in target computer?
    Your help is much appreciated!

    Hi,
    Where did you put the answer file? Windows has several places to check the files, you can refer to the following article, notice Implicit Answer File Search Order.
    Windows Setup Automation Overview
    http://technet.microsoft.com/en-in/library/hh824950.aspx
    For DVD drive letter, I think you can assign it via a script with diskpart command:
    Assign, change, or remove a drive letter
    http://technet.microsoft.com/en-in/library/cc757491(v=ws.10).aspx#BKMK_CMD
    Include a Custom Script in a Windows PE Image
    http://technet.microsoft.com/en-us/library/cc766521(v=ws.10).aspx
    Hope this helps.

  • Trouble Installing Windows 2012 R2 (Windows can't be installed on this drive)

    <p>I "binged" this error message and it seems to be beaten to death but my problem is not resolved. Basically, Im trying to install 2012 R2 on a server which currently also has CentOS6.3. Im not doing a dual boot and I want only Windows 2012.</p><p>During
    the install process I hit error message below. I have tried partitioning my disk but I end up with Primary partitions and same error as below. I tried pointing the Load Driver option to the right driver for the SUperMicro motherboard but it comes back to the
    same error. What am I missing and how can I fix this. All of the other links that the search found point to driver issues but did not mention which drivers exactly. Seems like I cannot upload images, but the error basically shows me
    Drive 0 partition 1
    Driver 0 Unallocated space
    and below it shows me that Windows cant be installed on this drive.
    <br />

    If you deleted all partitions (don't try formatting), you should have been presented with a volume with no partitions during the installation procedure.  You should be able to proceed at that point and Windows will initialize, partition, and format
    the disk according to its needs.
    If the disk is being shown to you but it still won't accept it for installation (it would be really helpful to get the exact message you are receiving), that is a little strange.  Possibly it requires a different driver.  At the screen that presents
    the volume to use for installation, there is also an option to load a driver.  (I have to do this all the time because I am regularly using drivers that are not on the Microsoft installation media).  You have to have access to the driver in order
    to be able to load it.  If the driver is on a CD, you remove the Windows DVD, insert the driver CD, browse to the location of the driver and install it, remove the driver CD, insert the Windows DVD, click refresh on the window, and you should be able
    to proceed, if the problem was a driver problem.
    The only other time I have had a situation like yours is when I have improperly zoned/masked a LUN from a SAN, but it sounds like you are dealing with local storage, so that most likely will not come into play.
    Is this the only hard drive on the system?
    .:|:.:|:. tim

  • How to install Oracle 11.2.0.4.0 Rac Database on Grid Infrastructure 12.1.0.2.0 (Windows 2012 R2)

    Hi all.
    This is the scenario:
    I have a 2 node cluster Microsoft Windows 2012 R2 x86_64, the nodes are part of domain.
    Installed Oracle 12cR1 (12.1.0.2.0) as follows:
    Installation done using domain administrator named "installoracle" that has been EXPLICIT promoted to local administrator in both nodes.
    One domain user named "oracle12c" with no administrator privileges neither in the domain or nodes.
    Installation, after a lot of customization in the OS of the nodes, has gone ok, perfect indeed, not even a warning during runinstaller execution.
    All services and resources are up & running, I have rebooted nodes and all comes back ok in place. In windows services I can see some services started with "oracle12c" user, and all windows groups: DBA, SYSKM, etc, has been created.
    Now I have to install Oracle RAC database in 11gR2 version (11.2.0.4.0) to accomplish with application requirements.
    So, I execute runInstaller (setup.exe) logged as administrator via domain administrator "installoracle" (the one that was able to do the smooth 12c GI installation) and the gui comes with out problems, but at 4th screen the one in which you have to choose what kind of installation you want to do (Single, RAC or RoN) I select RAC option, the gui returns error: crs is not running in the local node...
    Finally, in order to deliver some database 11.2.0.4.0 for my customer, I try to do installation of SW for Single Node, I did using "installoracle". The sw has been installed in one of the nodes. Then I have created a database and I have stored datafiles in ASM (this ASM is part of 12c clusterware) and also register the 11gR2 single instance database in the Grid Infrastructure listener
    So, whats next??? Why is this behavior??? I did similar installations in Linux/Solaris with no issue (well as everyone can imagine, always there are some issues, but when solved you got GI in 12c and databases in the release that you want 12c, 11g, 10g...)
    Any clue?
    Thanks in advance!!
    Best Regards!!

    To go back to old version (without changing compatible parameter), you can perform downgrade.
    Instructions are available at
    How to Downgrade from Database 11.2 to Previous Release (Includes 11.2.0.4 - 11.2.0.1) (Doc ID 883335.1)
    In this case you will having all the data file including the new one.
    But remember database may not be in the same status as before (Before upgrade). it may have invalid objects of higher version after downgrade. 
    Downgrade is applicable only to successfully upgraded databases. In case upgrade faced some issue, do not try downgrade there.
    Your second approach it not correct. Note that each datafile header will have db version. We can not open database in normal mode when header version and binary versions are different.

  • Migrate to Windows 2012 R2 and Exchange 2013 SP1 using database portability

    Hi, I'm planning to migrate from Exchange 2013 SP1 running on Windows 2012 to Exchange 2013 SP1 on Windows 2012 R2.
    Is it possible to use database portability to move the databases from the exchange installation on win 2012 to the new installation on Win 2012 R2? This would save a great deal of time not doing the mailbox moves.
    I've searched similar cases but couldn't find any, all speak about disaster recovery and database portability but I've found no articles that uses the migration scenario.
    Would it be possible to do and if so, what would the steps be? Do I need to delete the database from the source server, move the database files to the new server and mount them and relocate the mailboxes? Or should I dismount the database on the source server,
    move them to the new server and mount them and relocate the mailboxes?
    Frank.

    Hi,
    According to your description, I recommend you consider using DAG to achieve your requirement.
    The following steps for your reference:
    1.Prepare a new server which installed windows 2012 R2 for Exchange 2013 mailbox server.
    2.After you deploy Exchange 2013 Mailbox servers, you can create a DAG, add Mailbox servers to the DAG, and then replicate mailbox databases between the DAG members.
    3.After replication, you can mount all the databases on the new server.
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support
    This no way a resolution. This won't work at all as Both OS will be different and you can't form the Cluster.
    Please Unmark it!
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Should one use MPIO and/or CSV in a Windows 2012 R2 guest cluster?

    Should one use MPIO and/or CSV in a Windows 2012 R2 guest cluster using VMware ESXi 5.5 presented Fiber LUN RDMs.
    If MPIO were implemented is there a preference for HW manufacturer DISM vs. MS DISM in a guest cluster?
    What partition size/offset is recommended for the MSR partition (currently set to 1000 MB) - unfortunately seeing storage validation error with failing block write at block 2048 (which in return may be related to VMware ESXi 5.5. disk partition layout)
    The current setup works without using MPIO (question is would it help overcome the current failing persistent SCSI-3 reservation warning.)
    What were the benefit of using CSV if any in a guest cluster? The Luns in scope would eventually hold SQL data and log files.
     Thanks for your input already.
    Sassan Karai

    Hi,
    Regardless of what type of the shared storage is failover cluster have to use the shared storage, the shared storage can redirect the failed node data to others node, accordingly
    the failover cluster can get the high availability.
    From you descripted error there must you choose the VMware® unsupported storage with failover cluster, please refer the following VMware® official KB then reconfirm your topology
    design is supported.
    Third party KB:
    VMware vSphere support for Microsoft clustering solutions on VMware products
    http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1037959
    The related KB:
    Failover Clustering Hardware Requirements and Storage Options
    http://technet.microsoft.com/zh-cn/library/jj612869.aspx
    More information:
    Validate Storage Spaces Persistent Reservation Test Results with Warning
    http://blogs.msdn.com/b/clustering/archive/2013/05/24/10421247.aspx
    Understanding Cluster Validation Tests: Storage
    http://technet.microsoft.com/en-us/library/cc771259.aspx#PersistentReservation
    Shared storage for Windows Failover Cluster with MPIO
    http://blogs.technet.com/b/storageserver/archive/2011/05/31/shared-storage-for-windows-failover-cluster-with-mpio.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • IE opening multiple windows when searching google only.

    We have a problem where IE opens multiple windows when searching in Google. As a result of this we are receiving Google sorry page informing us that Google is receiving automated search requests from our public IP. Is there any quick fix to this problem
    apart from restoring and reset setting  in IE.
    Is anybody else facing this issue.?
    REgards
    Nahas

    Hi Nahas,
    Thank you for your update.
    Based on the current situation, you may remove any Google domains in your trusted sites for a test.
    Tools>Internet Options>Security tab, click "Reset all zones to default"
    Trusted sites icon, 'Sites' button. Remove any Google domains in your trusted sites list.
    For more information, you may refer to:
    Understanding Zone Elevation
    http://blogs.msdn.com/b/ieinternals/archive/2012/09/24/zone-elevation-security-warning-websites-in-less-privileged-zone-can-navigate-csrf-xss-protection.aspx
    Also, you may try to contact Google to confirm this.
    http://support.google.com/?hl=en
    If you wants to report a bug to Microsoft. I would like to share the link below with you.
    https://connect.microsoft.com/
    Thanks for your understanding.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support
    Spot on Blair. Thanks for the fix!
    Worked for me:
    Tools>Internet Options>Security tab, click "Reset all zones to default"

  • Windows 2012 BSOD - dump output

    Hello,
    1 of our Windows 2012 R2 server has been blue screening to day, any ideas what the bug might be?  It is our Citrix server so many users are logged in most of the time, here is the memory.dmp out put via Windbg:
    Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\MEMORY.DMP]
    Kernel Bitmap Dump File: Only kernel address space is available
    Symbol search path is: SRV*C:\SymCache*http://msdl.microsoft.com/download/symbols
    Executable search path is: 
    Windows 8 Kernel Version 9600 MP (4 procs) Free x64
    Product: Server, suite: TerminalServer
    Built by: 9600.17630.amd64fre.winblue_r7.150109-2022
    Machine Name:
    Kernel base = 0xfffff802`b1a76000 PsLoadedModuleList = 0xfffff802`b1d4f250
    Debug session time: Fri May  1 15:55:24.789 2015 (UTC + 1:00)
    System Uptime: 0 days 7:53:47.588
    Loading Kernel Symbols
    Loading User Symbols
    Loading unloaded module list
    *                        Bugcheck Analysis                                    *
    Use !analyze -v to get detailed debugging information.
    BugCheck 139, {3, fffff802b4fe47f0, fffff802b4fe4748, 0}
    Probably caused by : ntkrnlmp.exe ( nt!KiFastFailDispatch+d0 )
    Followup: MachineOwner
    0: kd> !analyze -v
    *                        Bugcheck Analysis                                    *
    KERNEL_SECURITY_CHECK_FAILURE (139)
    A kernel component has corrupted a critical data structure.  The corruption
    could potentially allow a malicious user to gain control of this machine.
    Arguments:
    Arg1: 0000000000000003, A LIST_ENTRY has been corrupted (i.e. double remove).
    Arg2: fffff802b4fe47f0, Address of the trap frame for the exception that caused the bugcheck
    Arg3: fffff802b4fe4748, Address of the exception record for the exception that caused the bugcheck
    Arg4: 0000000000000000, Reserved
    Debugging Details:
    TRAP_FRAME:  fffff802b4fe47f0 -- (.trap 0xfffff802b4fe47f0)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=ffffe001e61412d8 rbx=0000000000000000 rcx=0000000000000003
    rdx=0000000000000001 rsi=0000000000000000 rdi=0000000000000000
    rip=fffff802b1c087bb rsp=fffff802b4fe4980 rbp=0000000000000000
     r8=0000000000000000  r9=0000000000000002 r10=fffff802b1a76000
    r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei pl nz na pe cy
    nt! ?? ::FNODOBFM::`string'+0x3190b:
    fffff802`b1c087bb cd29            int     29h
    Resetting default scope
    EXCEPTION_RECORD:  fffff802b4fe4748 -- (.exr 0xfffff802b4fe4748)
    ExceptionAddress: fffff802b1c087bb (nt! ?? ::FNODOBFM::`string'+0x000000000003190b)
       ExceptionCode: c0000409 (Security check failure or stack buffer overrun)
      ExceptionFlags: 00000001
    NumberParameters: 1
       Parameter[0]: 0000000000000003
    DEFAULT_BUCKET_ID:  LIST_ENTRY_CORRUPT
    BUGCHECK_STR:  0x139
    PROCESS_NAME:  System
    CURRENT_IRQL:  2
    ERROR_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
    EXCEPTION_CODE: (NTSTATUS) 0xc0000409 - The system detected an overrun of a stack-based buffer in this application. This overrun could potentially allow a malicious user to gain control of this application.
    EXCEPTION_PARAMETER1:  0000000000000003
    TAG_NOT_DEFINED_c000000f:  FFFFF802B4FEBFB0
    LAST_CONTROL_TRANSFER:  from fffff802b1bd24e9 to fffff802b1bc69a0
    STACK_TEXT:  
    fffff802`b4fe44c8 fffff802`b1bd24e9 : 00000000`00000139 00000000`00000003 fffff802`b4fe47f0 fffff802`b4fe4748 : nt!KeBugCheckEx
    fffff802`b4fe44d0 fffff802`b1bd2810 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
    fffff802`b4fe4610 fffff802`b1bd1a34 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiFastFailDispatch+0xd0
    fffff802`b4fe47f0 fffff802`b1c087bb : fffff802`b1d79180 00000000`00000000 fffff802`b4fe4ae0 ffffe001`efac1350 : nt!KiRaiseSecurityCheckFailure+0xf4
    fffff802`b4fe4980 fffff802`b1b2a987 : ffffffff`fffe7960 00000000`00000001 fffff802`b4fe4ae0 fffff802`00000002 : nt! ?? ::FNODOBFM::`string'+0x3190b
    fffff802`b4fe49e0 fffff802`b1bca4ea : fffff802`b1d79180 fffff802`b1d79180 fffff802`b1dd2a00 ffffe001`ede29080 : nt!KiRetireDpcList+0xa57
    fffff802`b4fe4c60 00000000`00000000 : fffff802`b4fe5000 fffff802`b4fdf000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x5a
    STACK_COMMAND:  kb
    FOLLOWUP_IP: 
    nt!KiFastFailDispatch+d0
    fffff802`b1bd2810 c644242000      mov     byte ptr [rsp+20h],0
    SYMBOL_STACK_INDEX:  2
    SYMBOL_NAME:  nt!KiFastFailDispatch+d0
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: nt
    IMAGE_NAME:  ntkrnlmp.exe
    DEBUG_FLR_IMAGE_TIMESTAMP:  54b0c2f7
    BUCKET_ID_FUNC_OFFSET:  d0
    FAILURE_BUCKET_ID:  0x139_3_nt!KiFastFailDispatch
    BUCKET_ID:  0x139_3_nt!KiFastFailDispatch
    Followup: MachineOwner

    I usually start with MSDN analytical articles. In this case
    https://msdn.microsoft.com/en-us/library/windows/hardware/jj569891(v=vs.85).aspx
    HTH
    Milos

Maybe you are looking for

  • Setting up Time Capsule for backup only on existing wireless network

    I have a wireless network already set up with a NetGear wireless router. Cable plugs into router, router connected via ethernet cable to my Power Mac G5 desktop, plus 2 PC laptops in the house also connect wirelessly to the home network via this rout

  • Multiple character sets on a single page

    JDev 11.1.1.5 - WLS 10.0.3.5 I have an application that needs to have some fields in a different character set (like Amharic) and some in English. These are fixed - so when the user enters the field - it should already be in the different language. I

  • ITunes freezing with error -50, -3259 and 9006

    Okay, so I have had a problem with iTunes freezing in relation to downloading Podcasts since around version 8.  After updating to 10.2.2 on 10.6.7, iTunes has turned into one big fail.  Downloading anything produces any of the following error codes:

  • Maximum Permitted File Size in XI

    Hi, What is the maximum file size that XI can process ?? (With no splitting in adapters) Thanks in Advance, Chemmanz

  • Archive Log file size

    I am using Oracle database 9.2.0.1.0, My OS is Linux AS4 Update version. My database is in archive log mode, the archive file size generated on disk is 100 MB. I want to monitor the reason that why the size of redo generated is too big. Kindly sugges