Windows 2012 Teaming configuration

Dear All,
i want to configure teaming in windows 2012. i have 4 lan card and i am confuse in switch dependent and switch independant.
which option gives me best performance? this server having failover cluster node.
teaming will create any problem with cluster?
please help
Sunil
SUNIL PATEL SYSTEM ADMINISTRATOR

Hi,
It depend on your configurations and requirements.
In Switched Independ Mode, all the network adapters are connected to different switches provide alternate routes through the network. This configuration doesn't require switch to participate in the teaming. Since the switch is independent mode the switch doesnot
know which adapter is part of the NIC Team. This again classified into two mdes:
Active / Active Mode
Active / Passive Mode
In Switched Dependant Mode, it requires the switch to participate in the teaming. And also required all the NIC card to be connected to the same physical switch. This can be configured in Two modes:
Generic / Static Mode
Dynamic Teaming
Network card teaming is now supported in Windows Server 2012 with cluster. However, when iSCSI is used with dedicated NICs, then using any teaming solution is not recommended and MPIO/DSM should be used. But when iSCSI is used with shared NICs, those
shared NICs can be teamed and will be supported as long as it’s being used with Windows Server 2012 NIC Teaming solution.
Is NIC Teaming in Windows Server 2012 supported for iSCSI, or not supported
for iSCSI?
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

  • Windows 2012 R2 - Remote Desktop Sessions, RemoteFX, GPU, Blue Screen RemoteFX adaptor

    Nvidia GPU GRID K1
    Host Server - Dell Power edge R720 128 gig RAM 2 Xeon E5-2640v2 2.0GHz, 20M cache 8c
    Windows 2012 R2 full installation – Bios and all hardware with latest updates.
    Roles - Hyper V and Remote Desktop Virtualization Host
    EPT, GPU, WDDM (latest drivers) compatible for RemoteFX and fully up to date.
    I have disabled the video adaptor on the motherboard.
    I cannot complete with administrative permissions;
    dism /online /enable-feature /featurename:Microsoft-Windows-RemoteFX-EmbeddedVideoCap-Setup-Package
    Error: 0x800f080c
    Feature name Microsoft-Windows-RemoteFX-EmbeddedVidoCap-Setup-Package is unknown
    Question 1 - because video card on motherboard disabled, do I still need to complete this command?
    VM’s
    **I’m not interested in VDI but more Remote Desktop Sessions and the option to ‘pinch and zoom with Windows 8.1 tablets**
    VM1 - Windows 2012 R2 configured as generation 1 that is fully patched.
    This VM is able to start up and run until I add the new hardware for the RemoteFX Video adaptor from within the Hyper V settings. When I start the VM the server blue screens. I have tried multiple VM’s with 2012 but same thing
    If I created the VM as Generation 2 I am able to start the VM but the RemoteFX adaptor doesn’t appear in the device manager. I have read generation 2 isn’t compatible with RemoteFX.
    VM2 – *Testing purposes* - Windows 8.1 Enterprise configured as generation 1 that is fully patched.
    This VM I am able to start up and run the VDI after the RemoteFX video adaptor is installed, also the correct adaptor appears in the device manager. This seems to at least work correctly but I cannot pinch and zoom and the experience is poor.
    GPU summary within the Hyper V settings state there are 4 physical GPU’s all of which can be used with RemoteFX and that 1 virtual machine are using the GPU (Windows 8.1 enterprise VM)
    Firewalls off, latest RDP clients
    I have read you should be able to use Windows 2012 R2 and we should be able to use the sessions with pinch and zoom but now and then you come across something that tells me different.
    Question 2 – I need this to work with Windows 2012 R2 so we can use Remote Desktop Sessions 
    and the tablets can use pinch and zoom, anyone tell me what I may be doing wrong?

    Hi,
    Thank you for posting in Windows Server Forum.
    As per my research, you need to run the command although video adapter is disabled on motherboard. If you install the RemoteFX cap driver, the integrated video adapter is disabled while the operating system is running. 
    For more information you can refer beneath article.
    1. RemoteFX (with Hyper-V) is a serious business tool. For games.
    2. Configure RemoteFX in Hyper-V running Windows Server 2012 with low end GPU
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Windows 2012 Nodes - Slow CSV Performance - Need help to resolve my iSCSI issue configuration

    I spent weeks going over the forums and the net for any publications and advice on how to optimize iSCSI connections and i'm about to give up.  I really need some help in determining if its something i'm not configuring right or maybe its an equipment
    issue. 
    Hardware:
    2x Windows 2012 Hosts with 10 Nics (same NIC configuration) in a Failover Cluster sharing a CSV LUN. 
    3x NICs Teamed for Host/Live Migration (192.168.0.x)
    2x NICS teamed for Hyper-V Switch 1 (192.168.0.x)
    1x NIC teamed for Hyper-V Switch 2 (192.168.10.x)
    4x NICs for iSCSI traffic (192.168.0.x, 192.168.10.x, 192.168.20.x 192.168.30.x)
    Jumbo frames and flow control turned on all the NICs on the host.  IpV6 disabled.  Client for Microsoft Network, File/Printing Sharing Disabled on iSCSI NICs. 
    MPIO Least Queue selected.  Round Robin gives me an error message saying "The parameter is incorrect.  The round robin policy attempts to evenly distribute incoming requests to all processing paths. "
    Netgear ReadyNas 3200
    4x NICs for iSCSI traffic ((192.168.0.x, 192.168.10.x, 192.168.20.x 192.168.30.x)
    Network Hardware:
    Cisco 2960S managed switch - Flow control on, Spanning Tree on, Jumbo Frames at 9k - this is for the .0 subnet
    Netgear unmanaged switch - Flow control on, Jumbo Frames at 9k - this is for .10 subnet
    Netgear unmanaged switch - Flow control on, Jumbo Frames at 9k - this is for .20 subnet
    Netgear unmanaged switch - Flow control on, Jumbo Frames at 9k - this is for .30 subnet
    Host Configuration (things I tried turning on and off):
    Autotuning 
    RSS
    Chimney Offload
    I have 8 VMs stored in the CSV.  When try to load all 8 up at the same time, they bog down.  Each VM loads very slowly and when they eventually come up, most of the important services did not start.  I have to load
    them up 1 or 2 at a time.  Even then the performance is nothing like if they were loading up on the Host itself (VHD stored on the host's hdd).  This is what prompted me to add in more iSCSI connections to see if I can improve the VM's
    performance.  Even with 4 iSCSI connections, I feel nothing has changed.  The VMs still start up slowly and services do not load right.  If I distribute the load with 4 VMs on Host 1 and 4 VMs on Host 2, the load up
    times do not change. 
    As a manual test for file copy speed, I moved the cluster resources to Host 1 and copied a VM from the CSV and onto the Host.   The speed would start out around 250megs/sec and then eventually drop down to about 50/60 megs/sec.  If I turn
    off all iSCSI connections except one, it get the same speed.  I can verify from the Windows Performance Tab under Task Manager that all the NICS are distributing traffic evenly, but something is just limiting the flow.  Like what I stated on top,
    I played around with autotuning, RSS and chimney offload and none of it makes a difference. 
    The VMs have been converted to VHDx and to fixed size.  That did not help.   
    Is there something I'm not doing right?   I am working with Netgear support and they are puzzled as well.  The ReadyNas device should easily be able to handle it. 
    Please help!  I pulled my hair out over this for the past two months and I'm about to give up and just ditch clustering all together and just run the VMs off the hosts themselves. 
    George

    A few things...
    For starters, I recommend opening a case with Microsoft support.  They will be able to dig in and help you...
    Turn on the CSV Cache, it will boost your performance 
    http://blogs.msdn.com/b/clustering/archive/2012/03/22/10286676.aspx
    A file copy has no resemblance of the unbuffered I/O a VM does... so don't use that as a comparison, as you are comparing apples to oranges.
    Do you see any I/O performance difference between the coordinator node and the non-coordinator nodes?  Basically, see which node owns the cluster Physical Disk resource... measure the performance.  Then move the Physical Disk resource for the
    CSV volume to another node, and repeat the same measure of performance... then compare them.
    Your IP addressing seems odd...  you show multiple networks on 192.168.0.x and also on 192.168.10.x.   Remember that clustering only recognizes and uses 1 logical interface per IP subnet.  I would triple check all your IP schemes...
    to ensure they are all different logical networks.
    Check you binding order
    Make sure you NIC drivers and NIC firmware are updated
    Make sure you don't have IPsec enabled, that will significantly impact your network performance
    For the iSCSI Software Initiator, when you did your connection... make sure you didn't do a 'Quick Connect'... that will do a wildcard and connect over any network.  You want to specify your dedicated iSCSI network
    No idea what the performance capabilities of the ReadyNas is...  this could all likely be associated with the shared storage.
    What speed NIC's are you using?   I hope at least 10 GB...
    Hope that helps...
    Elden
    Hi Elden,
    2. CSV is turned on, I have 4GB dedicated from each host to it.  With IOmeter running within the VMs, I do see the read speed jumped up 4-5x fold but the write speed stays the same (which according to the doc it should).  But even with the read
    speed that high, the VMs are not starting up quickly.  
    4. I do not see any difference with IO with coordinator and non coordinator nodes.  
    5.  I'm not 100% sure what your saying about my IPs.  Maybe if I list it out, you can help explain further.  
    Host 1 - 192.168.0.241 (Host/LM IP), Undefined IP on the 192.168.0.x network (Hyper-V Port 1), Undefined IP on the 192.168.10.x network (Hyper- V port 2), 192.168.0.220 (iSCSI 1), 192.168.10.10 (iSCSI2), 192.168.20.10(iSCSI 3), 192.168.30.10 (iSCSI 4)
    The Hyper-V ports are undefined because the VMs themselves have static ips.  
    0.220 host NIC connects with the .231 NIC of the NAS
    10.10 host NIC connects with the 10.100 NIC of the NAS
    20.10 host NIC connects with the 20.100 NIC of the NAS
    30.10 host NIC connects with the 30.100 NIC of the NAS
    Host 2 - 192.168.0.245 (Host/LM IP), Undefined IP on the 192.168.0.x network (Hyper-V Port 1), Undefined IP on the 192.168.10.x network (Hyper- V port 2), 192.168.0.221 (iSCSI 1), 192.168.10.20 (iSCSI2), 192.168.20.20(iSCSI 3), 192.168.30.20 (iSCSI 4)
    The Hyper-V ports are undefined because the VMs themselves have static ips.  
    0.221 host NIC connects with the .231 NIC of the NAS
    10.20 host NIC connects with the 10.100 NIC of the NAS
    20.20 host NIC connects with the 20.100 NIC of the NAS
    30.20 host NIC connects with the 30.100 NIC of the NAS
    6. Binding orders are all correct.
    7. Nic drivers are all updated.  Didn't check the firmware.
    8. I do not know about IPSec...let me look into it.  
    9. I did not do quick connect, each iscsi connection is defined using a specific source ip and specific target ip.  
    These are all 1gigabit nics, which is the reason why I have so many NICs...otherwise there would be no reason for me to have 4 iscsi connections.  

  • Teaming with Windows 2012 DC (Datacenter Edition) Hyper V Host servers

    HI
    We are preparing 2 Windows 2012 R2 DC edition servers, each of them has 4 NICs, planning to configure both HV host and guest clustering. One NIC will be used for host / HV management and Host cluster traffic, other 3 NICs will be configured in a
    single team. These 3 NICs are connected to 2 differenet switches and our intention is to utilize the full bandwidhth. Teaming is configured as Switch Independent / Dynamic load balancing mode. Is this the right configuration? Also each of the VMs
    will configured in different VLANs through VLAN IDs.
    Thansk in advance
    LMS

    Hi,
    Although we do not recommend this, you can enable domain controllers as a cluster node in Windows Server versions earlier than Windows Server 2012. However, starting with
    Windows Server 2012, we no longer support this configuration. We do not support combining the AD DS role and the failover cluster feature in Windows Server 2012.
     At same time we don’t recommend install other role with Hyper-V with on the same server.
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Teaming options with Windows 2012 R2 Host for HV Guests

    Hi
    We are configuring Windows 2012 R2 standard host servers for Win 2008 / Win 2012 Guest servers. We have 3 NICs and using one for host management and other two in windows teaming. We read many blogs and supported configurations, but still not clear about
    the options with teaming.  Usually with teaming we select the default options such as Switch Independent Teaming mode, Dynamic Load Balancing mode with no standby adapter. Recently with this teaming configuration we faced issues with host servers on multiple
    Windows 2012 R2 standard host servers (the guest hang multiple times) and when we removed one of the NICs from team it started working fine. With the switches we didn't find any issues nor with NICs. Is it because of the default team options? Should we go
    with Hyper V port Load balancing mode?
    Expect support from you guys. Thanks in advance
    LMS

    Laljeev Madanamma
    TCP Chimney is not supported with NIC teaming in Windows Server 2012 R2 since TCP Chimney has the entire networking stack offloaded to the NIC, please check you have disable
    it.
    More information:
    NIC Teaming Overview
    http://technet.microsoft.com/en-us/library/hh831648.aspx
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Windows 2012 network teaming broken "host unmanageable"

    Hello,
    we are in the process of migrating servers to new hardware using the Platespin Migrate tool. That process has been tested in controlled Proof Of Concepts now for Windows 2003, 2008 and 2008R2, but now we come to Windows 2012 and we run into an issue with
    the Network Teaming reconfiguration after the copy is complete.
    The Windows 2008R2 and below also had teaming software installed from HP (HPNCU), and after migration we could simply run the cqniccmd.exe /D command to remove the "ghost" Teaming configuration and setup a new Team on the new networkadapters in
    the new (blade) server.
    Now with Windows 2012 we also have teaming on the original server that was configured using lbfoadmin.exe, and it was expected that after server 'restore' using Platespin that the team would be broken, but I also expected to simply be able to remove that
    leftover and configure a new one. But instead when I open the servermanager/lbfoadmin I see that the server shows "host unmanageable" and there is no sign of any old Team, nor does it show the new adapters to let me make a new team.
    I hope anyone can help me cleanup the old team-config and make a new one.
    Many thanks in advance,
    Eric
    Best regards and many thanks in advance, Eric Vegter

    Hi Alex,
    thanks for the reply. Basically it doesn't matter what tool is used to copy/clone/restore a machine to new hardware... After that process the NIC teaming will no longer work because the underlaying NICs that build the team have gone. That same thing happens
    when doing this cloning whit an HP server that has the HP Nic Configuration Utility installed that you use to configure a Team. After clone/migrate the server has new NICs and the virtual Team-NIC that was created on the original server is still seen in the
    Network-Adapters (NCPA.cpl) overview but it is invalid at that moment and must be removed. That remove/cleanup is simply done via the HP NCU commandline utility.. All works fine... On windows 2008r2 and below.. but 2012 is a different story.. That Virtual
    NIC that was created by the Windows 2012 built-in teaming is not visible after Cloning in the network-adapters overview, but the system still thinks it has teaming configured and using the provided GUI or powershell commands I cannot undo that old configuration.
    I also cannot setup a new teaming configuration. There is no firewall active on the system and the new physical NIC has an IP assigned and I can RDP and ping to the server as well, so the ICMP cause you mention will not be the case here..
    The only way I could clone that 2012 system and afterwards setup a new team was to break the teaming on the original source server, then clone it and then on that new server setup a team. That was possible now that the original server did not have a Team
    so nothing was left 'ghosted' somewhere in the registry/config. 
    Still I wish this would be possible to simply cleanup via a powershell commandlet and a /force (or /include-hidden or so) parameter so I do not have to make changes to my original source.
    If anyone has a suggestion how to (forcefully)  cleanup that Windows 2012 NIC Teaming config pls let me know. It would still help me migrate/clone the other few 2012 systems around here.
    Thanks
    Eric
    Best regards and many thanks in advance, Eric Vegter

  • NIC teaming and direct access in windows 2012 server core

    Hello All,
    I have installed windows 2012 r2 server core and i want to implement direct access with nic teaming enabled.
    Has anyone tried this kind of setup? Were they successful in it? Moreover can we configure Direct access when we have NIC teaming configured?
    -Ashish

    Hi There - NIC teaming in both core and gui is a standard feature and there is no reason (and I have used it successfully) why you cannot do so. As always make sure you look at TCP Offload as per UAG / TMG Days to ensure best performance and also Network
    Card Binding Order.
    The link for details is here -
    http://technet.microsoft.com/en-us/library/hh831648.aspx
    Kr
    John Davies

  • Windows 2012 3(three) Node custer Quorum Configuration

    Hi
    I have 3 Node windows 2012 R2 cluster. now i wanted to perform the quorum configuration so if any body having document or steps please let us know.

    Hi SPV4645,
    Since we don’t know which witness you will use, please refer the following series of article to determine which type is the best choose.
    Introduction to the Cluster Quorum Model (Part 2)
    http://blogs.msdn.com/b/clustering/archive/2010/06/15/10024985.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Server 2012 R2 Configure Windows Server Essentials" fails at 87%

    I've tried all the suggestions here https://social.technet.microsoft.com/Forums/windowsserver/en-US/3273ae3f-4952-4f96-be48-07bee6986e57/error-server-essentials-post-deployment-fails-at-0?forum=winserveressentials
    and https://social.technet.microsoft.com/Forums/en-US/b8caa9c7-ba91-475a-bf83-91aad9f0ba03/essentials-experience-postdeployment-configuration-fails?forum=winserveressentials
    short of a reformat, but it still fails for me at 87%. I have no ServerFolders folder to delete or rename, although I did at one point have an additional disk attached that had an old installation. possibly with ServerFolders, but I don't recall trying to
    install the Essentials role with that drive attached.
    I can provide the CBS log if preferred. I have been unable to find anything of use myself there.
    www.sflesch.com

    continued:
    [2488] 150112.181156.8910: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-ApplicabilityEngine%4Operational.evtx.
    [2488] 150112.181156.8930: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Application Server-Applications%4Admin.evtx.
    [2488] 150112.181156.8939: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Application Server-Applications%4Operational.evtx.
    [2488] 150112.181156.8959: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Application-Experience%4Program-Compatibility-Assistant.evtx.
    [2488] 150112.181156.8978: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Application-Experience%4Program-Compatibility-Troubleshooter.evtx.
    [2488] 150112.181156.8988: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Application-Experience%4Program-Inventory.evtx.
    [2488] 150112.181156.9281: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Application-Experience%4Program-Telemetry.evtx.
    [2488] 150112.181156.9350: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Application-Experience%4Steps-Recorder.evtx.
    [2488] 150112.181156.9613: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-ApplicationResourceManagementSystem%4Operational.evtx.
    [2488] 150112.181156.9633: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-AppLocker%4EXE and DLL.evtx.
    [2488] 150112.181156.9643: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-AppLocker%4MSI and Script.evtx.
    [2488] 150112.181156.9662: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-AppLocker%4Packaged app-Deployment.evtx.
    [2488] 150112.181156.9672: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-AppLocker%4Packaged app-Execution.evtx.
    [2488] 150112.181156.9691: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-AppModel-Runtime%4Admin.evtx.
    [2488] 150112.181156.9711: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-AppReadiness%4Admin.evtx.
    [2488] 150112.181156.9936: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-AppReadiness%4Operational.evtx.
    [2488] 150112.181156.9955: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-AppXDeployment%4Operational.evtx.
    [2488] 150112.181156.9975: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-AppXDeploymentServer%4Operational.evtx.
    [2488] 150112.181156.9994: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-AppXDeploymentServer%4Restricted.evtx.
    [2488] 150112.181157.0004: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-AppxPackaging%4Operational.evtx.
    [2488] 150112.181157.0023: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Audio%4CaptureMonitor.evtx.
    [2488] 150112.181157.0033: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Audio%4GlitchDetection.evtx.
    [2488] 150112.181157.0053: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Audio%4Operational.evtx.
    [2488] 150112.181157.0062: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Audio%4PlaybackManager.evtx.
    [2488] 150112.181157.0082: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Authentication User Interface%4Operational.evtx.
    [2488] 150112.181157.0092: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-BackgroundTaskInfrastructure%4Operational.evtx.
    [2488] 150112.181157.0111: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Backup.evtx.
    [2488] 150112.181157.0131: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Base-Filtering-Engine-Connections%4Operational.evtx.
    [2488] 150112.181157.0141: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Base-Filtering-Engine-Resource-Flows%4Operational.evtx.
    [2488] 150112.181157.0160: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-BestPractices%4Operational.evtx.
    [2488] 150112.181157.0521: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Bits-Client%4Operational.evtx.
    [2488] 150112.181157.0531: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Bluetooth-MTPEnum%4Operational.evtx.
    [2488] 150112.181157.0551: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-BranchCache%4Operational.evtx.
    [2488] 150112.181157.0570: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-BranchCacheSMB%4Operational.evtx.
    [2488] 150112.181157.0590: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-CertificateServices-Deployment%4Operational.evtx.
    [2488] 150112.181157.0600: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-CertificateServicesClient-Lifecycle-System%4Operational.evtx.
    [2488] 150112.181157.0619: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-CertificateServicesClient-Lifecycle-User%4Operational.evtx.
    [2488] 150112.181157.0629: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-CodeIntegrity%4Operational.evtx.
    [2488] 150112.181157.0648: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Connected-Search%4Operational.evtx.
    [2488] 150112.181157.0668: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-CoreApplication%4Operational.evtx.
    [2488] 150112.181157.0678: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-CorruptedFileRecovery-Client%4Operational.evtx.
    [2488] 150112.181157.0697: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-CorruptedFileRecovery-Server%4Operational.evtx.
    [2488] 150112.181157.0707: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Crypto-DPAPI%4BackUpKeySvc.evtx.
    [2488] 150112.181157.0727: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Crypto-DPAPI%4Operational.evtx.
    [2488] 150112.181157.0746: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-DAL-Provider%4Operational.evtx.
    [2488] 150112.181157.0756: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-DataIntegrityScan%4Admin.evtx.
    [2488] 150112.181157.0775: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-DataIntegrityScan%4CrashRecovery.evtx.
    [2488] 150112.181157.0785: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-DateTimeControlPanel%4Operational.evtx.
    [2488] 150112.181157.0805: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Deduplication%4Diagnostic.evtx.
    [2488] 150112.181157.0814: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Deduplication%4Operational.evtx.
    [2488] 150112.181157.0844: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Deduplication%4Scrubbing.evtx.
    [2488] 150112.181157.1059: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-DeviceSetupManager%4Admin.evtx.
    [2488] 150112.181157.1273: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-DeviceSetupManager%4Operational.evtx.
    [2488] 150112.181157.1283: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-DeviceSync%4Operational.evtx.
    [2488] 150112.181157.1508: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-DFSN-Server%4Admin.evtx.
    [2488] 150112.181157.1518: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Dhcp-Client%4Admin.evtx.
    [2488] 150112.181157.1537: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-DhcpNap%4Admin.evtx.
    [2488] 150112.181157.1547: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Dhcpv6-Client%4Admin.evtx.
    [2488] 150112.181157.1566: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Diagnosis-DPS%4Operational.evtx.
    [2488] 150112.181157.1820: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Diagnosis-PCW%4Operational.evtx.
    [2488] 150112.181157.1840: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Diagnosis-PLA%4Operational.evtx.
    [2488] 150112.181157.1850: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Diagnosis-Scripted%4Admin.evtx.
    [2488] 150112.181157.1869: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Diagnosis-Scripted%4Operational.evtx.
    [2488] 150112.181157.1889: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Diagnosis-ScriptedDiagnosticsProvider%4Operational.evtx.
    [2488] 150112.181157.1899: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Diagnostics-Networking%4Operational.evtx.
    [2488] 150112.181157.2113: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-DirectoryServices-Deployment%4Operational.evtx.
    [2488] 150112.181157.2123: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-DiskDiagnostic%4Operational.evtx.
    [2488] 150112.181157.2143: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-DiskDiagnosticDataCollector%4Operational.evtx.
    [2488] 150112.181157.2152: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-DiskDiagnosticResolver%4Operational.evtx.
    [2488] 150112.181157.2172: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-DNSServer%4Audit.evtx.
    [2488] 150112.181157.2191: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-DSC%4Operational.evtx.
    [2488] 150112.181157.2201: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-EapHost%4Operational.evtx.
    [2488] 150112.181157.2221: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-EapMethods-RasChap%4Operational.evtx.
    [2488] 150112.181157.2231: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-EapMethods-RasTls%4Operational.evtx.
    [2488] 150112.181157.2250: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-EapMethods-Ttls%4Operational.evtx.
    [2488] 150112.181157.2270: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-EnrollmentPolicyWebService%4Admin.evtx.
    [2488] 150112.181157.2299: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-EnrollmentWebService%4Admin.evtx.
    [2488] 150112.181157.2309: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-EventCollector%4Operational.evtx.
    [2488] 150112.181157.2328: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-FederationServices-Deployment%4Operational.evtx.
    [2488] 150112.181157.2338: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-FileServices-ServerManager-EventProvider%4Admin.evtx.
    [2488] 150112.181157.2357: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-FileServices-ServerManager-EventProvider%4Operational.evtx.
    [2488] 150112.181157.2367: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-FileShareShadowCopyProvider%4Operational.evtx.
    [2488] 150112.181157.2387: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-FMS%4Operational.evtx.
    [2488] 150112.181157.2397: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Folder Redirection%4Operational.evtx.
    [2488] 150112.181157.2416: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Forwarding%4Operational.evtx.
    [2488] 150112.181157.2426: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-GenericRoaming%4Admin.evtx.
    [2488] 150112.181157.3822: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-GroupPolicy%4Operational.evtx.
    [2488] 150112.181157.3842: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Help%4Operational.evtx.
    [2488] 150112.181157.3852: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-HomeGroup Control Panel%4Operational.evtx.
    [2488] 150112.181157.3871: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-IdCtrls%4Operational.evtx.
    [2488] 150112.181157.3881: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-IKE%4Operational.evtx.
    [2488] 150112.181157.3900: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-International%4Operational.evtx.
    [2488] 150112.181157.3920: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-International-RegionalOptionsControlPanel%4Operational.evtx.
    [2488] 150112.181157.3930: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Iphlpsvc%4Operational.evtx.
    [2488] 150112.181157.4438: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Iphlpsvc%4Trace.etl.
    [2488] 150112.181157.4467: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-KdsSvc%4Operational.evtx.
    [2488] 150112.181157.4486: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Kernel-ApphelpCache%4Operational.evtx.
    [2488] 150112.181157.4516: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Kernel-Boot%4Operational.evtx.
    [2488] 150112.181157.4545: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Kernel-EventTracing%4Admin.evtx.
    [2488] 150112.181157.4984: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Kernel-PnP%4Configuration.evtx.
    [2488] 150112.181157.5346: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Kernel-PnPConfig%4Configuration.evtx.
    [2488] 150112.181157.5365: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Kernel-Power%4Thermal-Operational.evtx.
    [2488] 150112.181157.5385: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Kernel-ShimEngine%4Operational.evtx.
    [2488] 150112.181157.5395: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Kernel-StoreMgr%4Operational.evtx.
    [2488] 150112.181157.5414: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Kernel-WDI%4Operational.evtx.
    [2488] 150112.181157.5424: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Kernel-WHEA%4Errors.evtx.
    [2488] 150112.181157.5629: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Kernel-WHEA%4Operational.evtx.
    [2488] 150112.181157.5834: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Known Folders API Service.evtx.
    [2488] 150112.181157.5854: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-LanguagePackSetup%4Operational.evtx.
    [2488] 150112.181157.5873: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-LiveId%4Operational.evtx.
    [2488] 150112.181157.5883: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-MemoryDiagnostics-Results%4Debug.evtx.
    [2488] 150112.181157.5902: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-MiStreamProvider%4Operational.evtx.
    [2488] 150112.181157.5912: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Mprddm%4Operational.evtx.
    [2488] 150112.181157.5932: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-MsLbfoProvider%4Operational.evtx.
    [2488] 150112.181157.5941: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-MSSHAV-SHV%4Operational.evtx.
    [2488] 150112.181157.5961: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-MUI%4Admin.evtx.
    [2488] 150112.181157.5981: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-MUI%4Operational.evtx.
    [2488] 150112.181157.6000: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-NCSI%4Operational.evtx.
    [2488] 150112.181157.6010: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-NdisImPlatform%4Operational.evtx.
    [2488] 150112.181157.6029: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-NetworkAccessProtection%4Operational.evtx.
    [2488] 150112.181157.6049: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-NetworkAccessProtection%4WHC.evtx.
    [2488] 150112.181157.6068: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-NetworkLocationWizard%4Operational.evtx.
    [2488] 150112.181157.6088: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-NetworkProfile%4Operational.evtx.
    [2488] 150112.181157.6098: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-NlaSvc%4Operational.evtx.
    [2488] 150112.181157.6117: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Ntfs%4Operational.evtx.
    [2488] 150112.181157.6137: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Ntfs%4WHC.evtx.
    [2488] 150112.181157.6156: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-NTLM%4Operational.evtx.
    [2488] 150112.181157.6166: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-OfflineFiles%4Operational.evtx.
    [2488] 150112.181157.6186: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-OOBE-Machine-DUI%4Operational.evtx.
    [2488] 150112.181157.6195: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Policy%4Operational.evtx.
    [2488] 150112.181157.6215: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-PowerShell%4Admin.evtx.
    [2488] 150112.181157.6479: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-PowerShell%4Operational.evtx.
    [2488] 150112.181157.6488: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-PowerShell-DesiredStateConfiguration-FileDownloadManager%4Operational.evtx.
    [2488] 150112.181157.6508: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-PrintService%4Admin.evtx.
    [2488] 150112.181157.6527: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-PushNotification-Platform%4Admin.evtx.
    [2488] 150112.181157.6547: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-PushNotification-Platform%4Operational.evtx.
    [2488] 150112.181157.6557: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-RasClusterResource%4Operational.evtx.
    [2488] 150112.181157.6576: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-ReadyBoost%4Operational.evtx.
    [2488] 150112.181157.6586: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Regsvr32%4Operational.evtx.
    [2488] 150112.181157.6606: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-ReliabilityAnalysisComponent%4Operational.evtx.
    [2488] 150112.181157.6615: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-RemoteAccess-MgmtClient%4Operational.evtx.
    [2488] 150112.181157.6635: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-RemoteAccess-RemoteAccessServer%4Admin.evtx.
    [2488] 150112.181157.6654: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-RemoteAccess-RemoteAccessServer%4Operational.evtx.
    [2488] 150112.181157.6674: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-RemoteApp and Desktop Connections%4Admin.evtx.
    [2488] 150112.181157.6684: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-RemoteApp and Desktop Connections%4Operational.evtx.
    [2488] 150112.181157.6703: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-RemoteAssistance%4Admin.evtx.
    [2488] 150112.181157.6713: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-RemoteAssistance%4Operational.evtx.
    [2488] 150112.181157.6732: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-RemoteDesktopServices-RdpCoreTS%4Admin.evtx.
    [2488] 150112.181157.7016: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-RemoteDesktopServices-RdpCoreTS%4Operational.evtx.
    [2488] 150112.181157.7035: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-RemoteDesktopServices-SessionServices%4Operational.evtx.
    [2488] 150112.181157.7055: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Resource-Exhaustion-Detector%4Operational.evtx.
    [2488] 150112.181157.7084: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-RestartManager%4Operational.evtx.
    [2488] 150112.181157.7094: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-SearchUI%4Operational.evtx.
    [2488] 150112.181157.7113: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Security-Audit-Configuration-Client%4Operational.evtx.
    [2488] 150112.181157.7123: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Security-Configuration-Wizard%4Operational.evtx.
    [2488] 150112.181157.7143: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Security-EnterpriseData-FileRevocationManager%4Operational.evtx.
    [2488] 150112.181157.7152: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Security-Netlogon%4Operational.evtx.
    [2488] 150112.181157.7172: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Security-SPP-UX-GenuineCenter-Logging%4Operational.evtx.
    [2488] 150112.181157.7192: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Security-SPP-UX-Notifications%4ActionCenter.evtx.
    [2488] 150112.181157.7201: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Security-UserConsentVerifier%4Audit.evtx.
    [2488] 150112.181157.7221: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-ServerEssentials%4Admin.evtx.
    [2488] 150112.181157.7426: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-ServerEssentials-Deployment%4Deploy.evtx.
    [2488] 150112.181157.7445: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-ServerManager-ConfigureSMRemoting%4Operational.evtx.
    [2488] 150112.181157.7777: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-ServerManager-DeploymentProvider%4Operational.evtx.
    [2488] 150112.181157.8090: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-ServerManager-MgmtProvider%4Operational.evtx.
    [2488] 150112.181157.8100: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-ServerManager-MultiMachine%4Admin.evtx.
    [2488] 150112.181157.8393: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-ServerManager-MultiMachine%4Operational.evtx.
    [2488] 150112.181157.8422: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Shell-ConnectedAccountState%4ActionCenter.evtx.
    [2488] 150112.181157.8442: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Shell-Core%4ActionCenter.evtx.
    [2488] 150112.181157.8764: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Shell-Core%4Operational.evtx.
    [2488] 150112.181157.8774: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-SilProvider%4Operational.evtx.
    [2488] 150112.181157.8793: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-SmartCard-Audit%4Authentication.evtx.
    [2488] 150112.181157.8813: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-SmartCard-DeviceEnum%4Operational.evtx.
    [2488] 150112.181157.8822: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-SmartCard-TPM-VCard-Module%4Admin.evtx.
    [2488] 150112.181157.8842: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-SmartCard-TPM-VCard-Module%4Operational.evtx.
    [2488] 150112.181157.9057: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-SmbClient%4Connectivity.evtx.
    [2488] 150112.181157.9076: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-SMBClient%4Operational.evtx.
    [2488] 150112.181157.9096: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-SmbClient%4Security.evtx.
    [2488] 150112.181157.9106: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-SMBDirect%4Admin.evtx.
    [2488] 150112.181157.9125: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-SMBHashGeneration%4Operational.evtx.
    [2488] 150112.181157.9135: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-SMBServer%4Connectivity.evtx.
    [2488] 150112.181157.9350: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-SMBServer%4Operational.evtx.
    [2488] 150112.181157.9369: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-SMBServer%4Security.evtx.
    [2488] 150112.181157.9389: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Storage-Tiering%4Admin.evtx.
    [2488] 150112.181157.9399: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-StorageSpaces-Driver%4Operational.evtx.
    [2488] 150112.181157.9418: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-StorageSpaces-ManagementAgent%4WHC.evtx.
    [2488] 150112.181157.9838: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Store%4Operational.evtx.
    [2488] 150112.181157.9858: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Superfetch%4AgmcOperation.evtx.
    [2488] 150112.181157.9877: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-SystemSettings%4Operational.evtx.
    [2488] 150112.181158.0092: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TaskScheduler%4Maintenance.evtx.
    [2488] 150112.181158.2026: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TaskScheduler%4Operational.evtx.
    [2488] 150112.181158.2035: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TCPIP%4Operational.evtx.
    [2488] 150112.181158.2055: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TerminalServices-ClientUSBDevices%4Admin.evtx.
    [2488] 150112.181158.2065: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TerminalServices-ClientUSBDevices%4Operational.evtx.
    [2488] 150112.181158.2084: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TerminalServices-LocalSessionManager%4Admin.evtx.
    [2488] 150112.181158.2299: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TerminalServices-LocalSessionManager%4Operational.evtx.
    [2488] 150112.181158.2319: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TerminalServices-PnPDevices%4Admin.evtx.
    [2488] 150112.181158.2328: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TerminalServices-PnPDevices%4Operational.evtx.
    [2488] 150112.181158.2348: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TerminalServices-Printers%4Admin.evtx.
    [2488] 150112.181158.2367: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TerminalServices-Printers%4Operational.evtx.
    [2488] 150112.181158.2377: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TerminalServices-RDPClient%4Operational.evtx.
    [2488] 150112.181158.2397: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TerminalServices-RemoteConnectionManager%4Admin.evtx.
    [2488] 150112.181158.2416: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TerminalServices-RemoteConnectionManager%4Operational.evtx.
    [2488] 150112.181158.2426: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TerminalServices-ServerUSBDevices%4Admin.evtx.
    [2488] 150112.181158.2446: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TerminalServices-ServerUSBDevices%4Operational.evtx.
    [2488] 150112.181158.2455: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TerminalServices-SessionBroker-Client%4Admin.evtx.
    [2488] 150112.181158.2475: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TerminalServices-SessionBroker-Client%4Operational.evtx.
    [2488] 150112.181158.2494: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TWinUI%4Operational.evtx.
    [2488] 150112.181158.2543: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TZSync%4Operational.evtx.
    [2488] 150112.181158.2563: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-TZUtil%4Operational.evtx.
    [2488] 150112.181158.2572: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-UAC%4Operational.evtx.
    [2488] 150112.181158.2592: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-UAC-FileVirtualization%4Operational.evtx.
    [2488] 150112.181158.2602: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-User Control Panel%4Operational.evtx.
    [2488] 150112.181158.2826: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-User Profile Service%4Operational.evtx.
    [2488] 150112.181158.2846: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-User-Loader%4Operational.evtx.
    [2488] 150112.181158.2865: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-UserPnp%4ActionCenter.evtx.
    [2488] 150112.181158.2875: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-UserPnp%4DeviceInstall.evtx.
    [2488] 150112.181158.2895: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-VDRVROOT%4Operational.evtx.
    [2488] 150112.181158.2905: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-VerifyHardwareSecurity%4Admin.evtx.
    [2488] 150112.181158.2924: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-VHDMP%4Operational.evtx.
    [2488] 150112.181158.2934: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-VPN%4Operational.evtx.
    [2488] 150112.181158.2953: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-VPN-Client%4Operational.evtx.
    [2488] 150112.181158.3158: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Wcmsvc%4Operational.evtx.
    [2488] 150112.181158.3178: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-WER-Diag%4Operational.evtx.
    [2488] 150112.181158.3197: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-WFP%4Operational.evtx.
    [2488] 150112.181158.3227: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Windows Firewall With Advanced Security%4ConnectionSecurity.evtx.
    [2488] 150112.181158.3500: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Windows Firewall With Advanced Security%4Firewall.evtx.
    [2488] 150112.181158.3715: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-WindowsUpdateClient%4Operational.evtx.
    [2488] 150112.181158.3735: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-WinINet-Config%4ProxyConfigChanged.evtx.
    [2488] 150112.181158.3744: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Winlogon%4Operational.evtx.
    [2488] 150112.181158.3764: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-WinNat%4Oper.evtx.
    [2488] 150112.181158.4037: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-WinRM%4Operational.evtx.
    [2488] 150112.181158.4047: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Winsock-WS2HELP%4Operational.evtx.
    [2488] 150112.181158.4067: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Wired-AutoConfig%4Operational.evtx.
    [2488] 150112.181158.4399: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-WMI-Activity%4Operational.evtx.
    [2488] 150112.181158.4418: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-Workplace Join%4Admin.evtx.
    [2488] 150112.181158.4438: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-WPD-ClassInstaller%4Operational.evtx.
    [2488] 150112.181158.4448: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-WPD-CompositeClassDriver%4Operational.evtx.
    [2488] 150112.181158.4467: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-Windows-WPD-MTPClassDriver%4Operational.evtx.
    [2488] 150112.181158.4477: General: Compressed C:\Windows\System32\winevt\Logs\Microsoft-WS-Licensing%4Admin.evtx.
    [2488] 150112.181202.7583: General: Compressed C:\Windows\System32\winevt\Logs\Security.evtx.
    [2488] 150112.181202.7866: General: Compressed C:\Windows\System32\winevt\Logs\Setup.evtx.
    [2488] 150112.181202.9897: General: Compressed C:\Windows\System32\winevt\Logs\System.evtx.
    [2488] 150112.181203.0474: General: Compressed C:\Windows\System32\winevt\Logs\Windows PowerShell.evtx.
    [2488] 150112.181203.0503: General: Compressed C:\Windows\System32\winevt\Logs\WitnessClientAdmin.evtx.
    [2488] 150112.181203.0532: General: Compressed C:\Windows\logs\CBS\CBS.log.
    [2488] 150112.181203.2661: General: Compressed C:\Windows\logs\CBS\CbsPersist_20150108005133.cab.
    [2488] 150112.181203.4175: General: Compressed C:\Windows\logs\CBS\CbsPersist_20150108024300.cab.
    [2488] 150112.181207.5201: General: Compressed C:\Windows\logs\CBS\CbsPersist_20150111204958.log.
    [2488] 150112.181209.5103: General: Compressed C:\Windows\logs\CBS\CbsPersist_20150111210433.log.
    [2488] 150112.181211.4420: General: Compressed C:\Windows\logs\CBS\CbsPersist_20150112181704.log.
    [2488] 150112.181211.4430: General: Compressed C:\ProgramData\Microsoft\Windows Server\Logs\CA_ROLE_INSTALL.log.
    [2488] 150112.181211.4440: General: Compressed C:\ProgramData\Microsoft\Windows Server\Logs\Errors.log.
    [2488] 150112.181211.6510: General: Compressed C:\ProgramData\Microsoft\Windows Server\Logs\ProviderRegistryService.log.
    [2488] 150112.181211.6686: General: Compressed C:\ProgramData\Microsoft\Windows Server\Logs\SetupCmdlets.log.
    [2488] 150112.181211.6783: General: Compressed C:\ProgramData\Microsoft\Windows Server\Logs\SharedServiceHost-ManagementServiceConfig.log.
    [2488] 150112.181211.6793: General: Compressed C:\ProgramData\Microsoft\Windows Server\Logs\SharedServiceHost-NotificationServiceConfig.log.
    [2488] 150112.181211.7535: General: Compressed C:\ProgramData\Microsoft\Windows Server\Logs\storageservice.011115.log.
    [2488] 150112.181211.9244: General: Compressed C:\ProgramData\Microsoft\Windows Server\Logs\storageservice.011215.log.
    [2488] 150112.181211.9264: General: Compressed C:\ProgramData\Microsoft\Windows Server\Logs\storageservice.log.
    [2488] 150112.181211.9274: General: Compressed C:\ProgramData\Microsoft\Windows Server\Logs\storageutil.011115.log.
    [2488] 150112.181211.9274: General: Compressed C:\ProgramData\Microsoft\Windows Server\Logs\storageutil.011215.log.
    [2488] 150112.181211.9283: General: Compressed C:\Windows\Panther\cbs.log.
    [2488] 150112.181211.9283: General: Compressed C:\Windows\Panther\Contents0.dir.
    [2488] 150112.181211.9283: General: Compressed C:\Windows\Panther\Contents1.dir.
    [2488] 150112.181211.9293: General: Compressed C:\Windows\Panther\diagerr.xml.
    [2488] 150112.181211.9293: General: Compressed C:\Windows\Panther\diagwrn.xml.
    [2488] 150112.181211.9313: General: Compressed C:\Windows\Panther\MainQueueOnline0.que.
    [2488] 150112.181211.9332: General: Compressed C:\Windows\Panther\MainQueueOnline1.que.
    [2488] 150112.181211.9401: General: Compressed C:\Windows\Panther\setup.etl.
    [2488] 150112.181211.9528: General: Compressed C:\Windows\Panther\setupact.log.
    [2488] 150112.181211.9528: General: Compressed C:\Windows\Panther\setuperr.log.
    [2488] 150112.181211.9664: General: Compressed C:\Windows\Panther\setupinfo.
    [2488] 150112.181212.0406: General: Compressed C:\Windows\Panther\_s_2C40.tmp.
    [2488] 150112.181212.0543: General: Compressed C:\Windows\Panther\_s_2D0D.tmp.
    [2488] 150112.181212.1295: General: Compressed C:\Windows\Panther\_s_5380.tmp.
    [2488] 150112.181212.1422: General: Compressed C:\Windows\Panther\_s_56CD.tmp.
    [2488] 150112.181212.3043: DeploymentService: Zipping log files to: C:\ProgramData\Microsoft\Windows Server\Data\HSBSLogs-01-12-2015-18-11-56.zip
    [2488] 150112.181212.3053: DeploymentService: Setting ResultsFile value to C:\ProgramData\Microsoft\Windows Server\Data\TME\Results\TaskStatusResults635566831166879400.xml
    [2488] 150112.181212.3053: DeploymentService: Checking the results from the Initial Configuration run
    [2488] 150112.181212.3209: DeploymentService: Found the result file: C:\ProgramData\Microsoft\Windows Server\Data\TME\Results\TaskStatusResults635566831166879400.xml
    [2488] 150112.181212.3698: DeploymentService: Results:
    [2488] 150112.181212.3698: DeploymentService: Task: SetSKUTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3698: DeploymentService: Task: ConfigSqmTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3698: DeploymentService: Task: ConfigWERTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3698: DeploymentService: Task: SetFolderPermission, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: ProcessHostingInfoTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: LoadOEMInfoTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: EnableWFNetworkDiscovery, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: NetTcpPortMappingIPv4, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: NetTcpPortMappingIPv6, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: DisableAdminPwdExpiration, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: ConfigureW32TimeService, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: SetDomainRegionTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: CreateLocalNewUserTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: ADBinaries_INSTALL, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: ChangeAdminPassword, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: ChangeComputerName, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: RebootForComputerName, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: DCPromoTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: DCReadyTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: ADPowershell_Install, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: SetDnsServerForwarders, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: CA_ROLE_INSTALL, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: StartMustHaveMgmtSvcTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: RestartServiceAfterCARoleInstalled, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3707: DeploymentService: Task: ConfigureCATask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: CATESTHOOK1, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: CATESTHOOK2, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: ConfigCRLDistributionListTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: CreateServerCertTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: CreateDefaultWebSiteTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: ConfigRAWebsiteDeploymentTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: ConfigWebApiApplication, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: ConfigureClientWebsiteTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: ConfigureCertWebServiceTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: UpdateRemoteAccessWebConfig, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: CreateDownloadVdirTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: ConfigureClientSSLsiteTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: CreateMacWebServerTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: OEMBrandingTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: ConfigureRAMGroupsTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: AddTrustedSite, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: RegisterUAL, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: SetSysEnvVar_WebAddIns, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: SetWebBrowserControlEmulation, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: Install_Password_Filter, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3717: DeploymentService: Task: SetSANPolicy, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3727: DeploymentService: Task: EnableRemoteDesktop, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3727: DeploymentService: Task: STORAGE_ENABLE, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3727: DeploymentService: Task: ConfigDfsRootNameSpaceTask, Succeeded: True, Warning: False, Continue: True
    [2488] 150112.181212.3727: DeploymentService: Ignore Task status: InitializeStorage, Succeeded: False, Warning: False, Continue: True
    [2488] 150112.181212.3727: DeploymentService: Ignore Task status: InitializeStorage, Succeeded: False, Warning: False, Continue: True
    [2488] 150112.181212.3727: DeploymentService: Task: InitializeStorage, Succeeded: False, Warning: False, Continue: True
    [2488] 150112.181212.3727: DeploymentService: Here is the list of errors we encountered during setup:
    [2488] 150112.181212.3727: DeploymentService: FATAL: InitializeStorage: 
    [2488] 150112.181212.4059: DeploymentService: Creating ISqmProviderClient
    [2488] 150112.181212.4059: DeploymentService: Getting IC Start Time
    [2488] 150112.181212.4069: DeploymentService: Retrieved IC Start Time is 01/12/2015 18:11:49
    [2488] 150112.181212.4088: DeploymentService: SQM value DATAID_WSE_DEPLOYMENT_TASKFAIL set to InitializeStorage
    [2488] 150112.181212.4147: DeploymentService: SQM value DATAID_WSE_IS_HOSTED set to 4
    [2488] 150112.181212.5163: DeploymentService: SQM value DATAID_WSE_Deployment_Container set to 3
    [2488] 150112.181212.5485: DeploymentService: SQM value DATAID_WSE_Deployment_ADEnv set to 34
    [2488] 150112.181212.5621: General: Search for object with query: Select * FROM SoftwareLicensingService
    [2488] 150112.181213.6784: General: Search for object with query: Select * FROM SoftwareLicensingProduct WHERE ApplicationId="55c92734-d682-4d71-983e-d6ec3f16059f" AND PartialProductKey <> null
    [2488] 150112.181213.8317: General: ActivationStatus.ReArmCount = 1000
    [2488] 150112.181213.8327: General: ActivationStatus.LicenseStatus = 1
    [2488] 150112.181213.8327: General: ActivationStatus.GracePeriod (minutes) = 0
    [2488] 150112.181213.8376: DeploymentService: Setup stage changing to ICDone
    [2488] 150112.181213.8493: Notifications: Information: [0] : LNx01: ClearNotifications: source SNx03 is clearing 1 Notification(s).
    [2488] 150112.181213.8561: Notifications: Information: [0] : LNx01:    Cleared:
    Notification Category: Setup
                       Id: SetupStageChange
                   Source: notifier:SharedServiceHost.exe:p8272:mt4:1; Local-TARDIS:SharedServiceHost.exe:p8272:mt4:1
    [2488] 150112.181213.8561: Notifications: Information: [0] : LNx01: (Will clear 1 Notifications on RNx04 (breadcrumb LNx01_ClearNotifications_0x4))
    [9048] 150112.181213.8600: Notifications: Information: [0] : Clearing 1 Notification(s) on neighbor RNx04. (LNx01_ClearNotifications_0x4)
    [2488] 150112.181213.8854: Notifications: Information: [0] : LNx01: RaiseNotifications: source SNx03 is raising 1 Notification(s).
    [2488] 150112.181213.8854: Notifications: Information: [0] : LNx01: (0 are replacing previously raised Notification(s))
    [2488] 150112.181213.8854: Notifications: Information: [0] : LNx01:    Adding:
    Notification Category: Setup
                       Id: SetupStageChange
                   Source: notifier:SharedServiceHost.exe:p8272:mt4:1; Local-TARDIS:SharedServiceHost.exe:p8272:mt4:1
    [2488] 150112.181213.8854: Notifications: Information: [0] : LNx01: (Will send 1 Notification(s) on to RNx04 (breadcrumb LNx01_RaiseNotifications_0x5))
    [3764] 150112.181213.8864: Notifications: Information: [0] : Sending 1 Notification(s) to neighbor RNx04. (LNx01_RaiseNotifications_0x5)
    www.sflesch.com

  • SharePoint 2010 SP2 hosted on Windows 2012 R2 NOT discovered by SCOM 2012 R2 + 2 SP MP's

    What is the process to get SharePoint 2010 Management Packs loaded in System Center 2012 R2 to discover/monitor SharePoint 2010 SP2 (14.0.7121.5000) loaded on Windows 2012 R2?
    View of installed system:
     System Center 2012 R2 loaded on Windows 2012 R2 (supported separately by SQL 2012 SP1 loaded on Windows 2012 R2)
    -Microsoft SharePoint 2010 Products Management Pack for System Center Operations Manager 2007
    -System Center 2012 Monitoring Pack for SharePoint 2010
     SharePoint 2010 SP2 (14.0.7121.5000) loaded on Windows 2012 R2 (supported separately by SQL 2012 SP1 loaded on Windows 2012 R2)
    The SharePoint 2010 Management Shell works fine!
    Result
    Event 0, Operations Manager - Cannot identify which SharePoint farm server is associated with. Check the management pack guide for troubleshooting information.
    Looked at these already:
    KB2690744, Configuring the SharePoint 2010 Management Pack for System Center Operations Manager. 
    http://om2012.wordpress.com/2013/05/24/sharepoint-2010-mp-on-scom-2012/
    Further, if the xml push does have the command get-farm instead of get-spfarm, that could be the issue. i.e.
    http://www.scom2k7.com/advanced-troubleshooting-of-the-sharepoint-2010-mp/
    Thanks,
    +Tony
    Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you.

    Peter,
     I recommend to remove the Windows 2012 R2 server out of the farm and redeploy on W2008 R2.
    This issue does not have an easy fix.
    Summarizing, this appears to be the issue:
    1. Windows Management Framework 3.0 is integrated with Windows 2012 R2, which installs .NET 4 and Powershell 4.0. Not uninstallable.
    2. The Add-PSSnapin Microsoft.SharePoint.PowerShell is not supported with Powershell 4.0.
    3. The SCOM SP2010 MP puts a package on the defined farm server and when the agent launches the package, it calls Powershell (v4 in theis case) and errors out. The target W2012 server will have an Error 0 in the Operations Manager Event log. See below.
    Options:
    1. Work around maybe - Develop method for manual discovery (I'm working on that now).
    2. Rebuild SP2010 farm on Windows 2008 R2
    3. System Center Team - Write a new MP to down version Powershell (Powershell.exe -Version 2)
    4. Powershell Team - Write a SharePoint Snapin for Powershell 4
    Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you.

  • Change OutlookSecureTempFolder in Windows 2012/Outlook 2013

    I am looking for a way to change the value of the OutlookSecureTempFolder registry key for all users on a RDS server, which supposedly can be found at HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Security.
    In Windows 2012 I don't seem to be able to find this key. Does anyone know where it is at in Windows 2012? Or does anybody know another way to change it?

    Hi,
    Do you ever have an attachment opened in Outlook? If you haven't tried opening an attachment within Outlook, the
    HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Security key won't be created. So, please try to open an attachment directly within Outlook, and then look for the key again.
    If you still cannot see the key, we may also try creating the key directly to see the result. But before this, it's recommended to
    back up your registry because serious problems might occur if you modify the registry incorrectly.
    Note: Please make sure that the new folder for Outlook Security temp file exists before changing it in the registry.
    Please let me know if this works.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Subnet config and switch layout for windows 2012 ISCSI server

    I would like to ask about subnet design and switch layout in regards to using a Windows 2012 ISCSI solution. When you guys design subnets for ISCSI configurations do you use one subnet or multiple subnets?  Also do you link the switches together when
    designing your ISCSI layouts? These types of things are normally discussed in vendor deployment guides.  However, I have not come across a best practices guide for deploying Server 2012 ISCSI.

    I would like to ask about subnet design and switch layout in regards to using a Windows 2012 ISCSI solution. When you guys design subnets for ISCSI configurations do you use one subnet or multiple subnets?  Also do you link the switches together
    when designing your ISCSI layouts? These types of things are normally discussed in vendor deployment guides.  However, I have not come across a best practices guide for deploying Server 2012 ISCSI.
    For iSCSI you typically create a separate subnets around physical NICs you use for iSCSI traffic (assuming they are used by iSCSI target for MPIO of course). Here are few guides on how to do that (some for Windows Server 2008 R2 but you can ignore that fact
    as target itself did not change much and concepts are still the same). See:
    Configure iSCSI MPIO on Windows (full)
    http://blogs.technet.com/b/migreene/archive/2009/08/29/3277914.aspx
    (make sure you have at leas one connection before you try to enable MPIO)
    Setting up a Target and Initiator
    http://www.server-log.com/blog/2011/7/26/setting-up-an-microsoft-iscsi-target-and-initiator-using-mpi.html
    You need however be aware of a couple of facts... 
    1) MSFT does not see much future in iSCSI and is replacing it with SMB3 where it can. So if you want to use iSCSI to provide shared storage to your guest VMs you need to use shared VHDX hosted on SMB3 share, see:
    Shared VHDX for guest VM Cluster
    http://technet.microsoft.com/en-us/library/dn265980.aspx
    If you plan to use iSCSI to host CSV and VM images there you again can use SMB3 share, see:
    Hyper-V over SMB
    http://technet.microsoft.com/en-us/library/jj134187.aspx
    That's both simpler to manage (you don't configure anything except teaming for NICs to enable SMB Multichannel and create a shared folder in a few clicks) and faster: MSFT iSCSI target is not cached @ server side while (OK, Hyper-V ovens VMs in a pass-thru
    mode but other users typically don't do that). SQL Server is the same as Hyper-V in terms of SMB3 support, Windows clusters support SMB3 share as a witness and so on.
    2) That's a single point of failure. Think about using SoFS instead of a single SMB3 share and think about clustering your target (you'll need a separate fault tolerant back end of that) to increase uptime. See:
    MSFT iSCSI Target Failover Cluster
    http://techontip.wordpress.com/2011/05/03/microsoft-iscsi-target-cluster-building-walkthrough/
    Good luck! :)
    StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

  • File Share Cluster Transfer Issues - Windows 2012 R2 - Two Nodes

    Hi There,
    I am having some issues in creating a simple file share on a 2 node cluster.
    Each "File Server" is Windows 2012 R2 Standard.
    Each server has 4 Nic Ports, 2 are configured as a Control Team and the other 2 as a Media Team.  The media team is specifically for any storage and file sharing traffic, the control team is purely for access to the server via RDC.
    The storage is from a NetApp SAN connected via SAS cables to the 2 "File Servers" and transfer speeds to and from that are good (1GB/s)
    I have looked at different step-by-steps to get this working, they all are similar to: https://robertsmit.wordpress.com/2012/06/26/clustering-fileserver-on-windows-2012-step-by-step/
    The share permissions are configured with Everyone with Full Control.
    Once the file shares are all set up, I can browse the shares and any current folders and files.
    I can download any files that exist on these shares...
    The issue is when I try to put a file on the share from a "client" server (win 2008 r2) or even from the other node (connecting to the file share location as I would on another machine)
    I just get the copying dialogue attached, which sits there for about 3-4 minutes and then just finishes with a Network Error.
    This only occurs during an upload of a file to the share.
    All servers can ping each other, there are no cluster event errors..
    Can anyone help, I need to get this fixed ASAP.
    If you need more info then please ask.
    Thanks,
    -Tim

    Hi Tim,
    Did you run the cluster validation before you create this cluster? Please disable any firewall or AV soft and install the recommended hotfixes and updates for Windows Server
    2012 R2-based failover clusters update to narrow down the issue first.
    Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
    http://support.microsoft.com/kb/2920151
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • WSUS windows 2012..failed to down load update

    My wsus fails to download the updates.
    Setup:
    windows 2012 standard
    SQL 2008R2 fully patched.
    running on Vmware 5.1
    Log:
    log entry 1:
    The WSUS content directory is not accessible.
    System.UnauthorizedAccessException: Access to the path 'E:\WSUS\WsusContent\anonymousCheckFile.txt' is denied.
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath,
    Boolean checkHost)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
       at System.IO.FileInfo.Open(FileMode mode, FileAccess access, FileShare share)
       at Microsoft.UpdateServices.Internal.HealthMonitoring.HmtWebServices.CheckContentDirWebAccess(EventLoggingType type, HealthEventLogger logger)
    log Entry 2:
    The server is failing to download some updates.
    Log Entry 3:
    Log Entry 4:
    Content file download failed. Reason: Error calling [kernel32.dll]:CreateDirectory(E:\WSUS\WsusContent\D5) Source File:  Destination File: .
    The permissions on directory E:\WSUS\WsusContent are incorrect.
    I know it has to be permission issues but for the life of me cannot figure it out. I have tipple checked the permission but they seem to be in order. I have performed clean install several time and same result. I have compared it with my working
    2008 R2 server and everything seems in order. 

    Exactly by following the Microsoft "migration" guide
    Argghh.. I wish they'd shoot and kill that thing. The 'guide' is part of why migration has been such a pain.
    Whats your point?
    My original point was going to drive toward the state of KB2734608 on the original server, but now we have so many more opportunities for complications to have occurred. :-)
    "Values does not fall within the expected range" is a new message that we've not seen prior to very recent times. Since the only thing new/changed in WSUS relates to SHA256 hashes, it occurs to me that 'migrating' a WSUS v3 server that does not have KB2734608
    installed onto a WSUS v6 server on Win2012 may be inherently problematic.
    The procedure you used was derived from an older procedure for migrating to Windows Server 2008 R2, and was originally created (for Win2012) in Feb 2012, updated in April 2012, but does not take into consideration the subsequently discovered impact of the
    use of SHA256 hashes in Win8/Win2012.
    WSUS has built in replication -- I've never understood why the Windows Server team found it necessary to build such a complicated procedure when the native replication does almost all of the work in one step.
    Consider this alternate migration procedure:
    Install KB2734608 on original WSUS v3 server. (This is necessary to create the SHA256 hashes for all of the updates in the database.)
    Install fresh WSUS v6 on Windows Server 2012 and configure as replica of WSUS v3 server.
    Replicate. (This will bring across updates, computer groups and approvals.)
    After replication (and file transfers) are complete, configure the new servers as an upstream server and synchronize with Microsoft.
    Point the clients to the new server. (If you are using client-side targeting, the clients will automatically populate into their assigned groups.)
    Also, to the procedure used... if you copy the 'WSUSContent' folder from the old server to the new server, it results in the ACLs of the new server being overwritten, taking away necessary access rights for the new server to work correctly.
    Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
    SolarWinds Head Geek
    Microsoft MVP - Software Distribution (2005-2012)
    My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin

  • Issues with Shell32.dll, NTDLL.DLL and Migration from Windows 2003 to Windows 2012

    Hello all,
    I am new to ThinApp and working as a consultant to help a company migrate older Windows 2003 software to Windows 2012.  They have purchased ThinApp 5.0.4.5 so that is what we will be using.
    We have created a clean 2003 VM and did a pre-scan
    We loaded the application and configured it  and then did a capture.
    We then tested the capture the 2003 VM and it works
    We then loaded the capture on a Clean 2003 VM and it works
    We then loaded onto a 2012 VM and when running the app from a command window get an error  -missing import shell32.dll:StrCpyNW
    If we run the capture in Emulation Mode on 2012 VM, we do not get the Shell32.dll error but instead the cmd fails with a Fault Module Name  - NTDLL.DLL error
    I am sure I am just missing the correct location to identify or configure the capture - but do not have the experience to know where yet.  (Taking training next week).
    Until then, is there any suggestions which I can try?
    Thanks for your time in advance,
    Vince 

    Tried and done that.  The main issue while configuring the printer from the printer Web Interface is that there is no access to the Digital Sending section due to a problem with the "Sun Java plug in"  I think the code mentions 1.31. or similar.
     We downloaded the java plug in and installed it.  No progress. 
    We reset the printer to defaults and reconfigured it .. It sees the smtp gateway and access it but fails sending email with scanned documents.. 
    We have tried in very different ways.  We connected the printer to another domain SBS server 2003 and it works beautifully.  So, I have no idea on what is the problem. We created a firewall exception for ports 390. 1783 from the SBS to the Printer
    and still no go..
    We have tried four different accounts and nothing.  Same results as stated originally.
    Any other suggestions??
    JFM

Maybe you are looking for

  • SDK and Eclipse - are they the way for me to go?

    Hi, I've done a bit of reading and would just like someone to either steer me in the right direction on this or flatly say "No - Go back, you'll only enter a world of pain, flee while you still can". We wish to distribute a thin reporting client to a

  • How do I change the iCloud account on my iPhone?

    I had to change my account name on my computer and the previous email does not even exist anymore. It wont let me delete the account off of my phone unless I turn off Find My iPhone, which I cannot do because the iCloud account that it asks the passw

  • Why does the Autofill no longer work on my macbook

    Why is the autofill no longer working on my macbook?

  • How to monitor my shared network connection

    Hi, I have a mac mini server which I'm using (among other things) to share my internet network connection (from the ethernet adapter) with other wireless clients through the wireless adapter. This works fine. My question is: how do I monitor how many

  • Re : Get Average count of previous 3 Years

    Hello All, Hope all is well. I have this query , where I am counting the numbers of items sold based on 4 dimensions and then in the next column now client wants the average count of previous 3 years items sold. The query results look like this , Yea