Windows 2012R2 does not boot automatically after BSOD

I have a Windows 2012R2 server with some critical applications.
Sometimes one of that applications causes BSOD. It doesn't matter why - I need the server to reboot and continue running without manual intervention. Instead of it server restarts and then stays on "Choose an option" screen (with Continue/Use
a device/Troubleshoot/Turn off your PC options).
After that I need to go to server room and press Continue manually. It is not an option for me because it can happen during the night and server will not be operational until the morning. Is there the way to skip that screen automatically?

Hi,
Thank you for posting your issue in the forum.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards,
Justin Gu

Similar Messages

Windows xp will not boot up after installation of desktop software 4.3.

windows xp will not boot up after installation of desktop software 4.3. Where do I start to get my p.c. going again ???

I get the message that a recent hardware or software change might have caused this.
The computer does not boot up in safe mode or last known good configuration.
I'm glad you think the software has nothing to do with it, but perhaps you can also explain why this problem started as soon as I downloaded the desktop software and tried to restart the computer.

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

Satellite M30-107 does not boot correctly after Recovery disk usage

Hi
I've recently got hold of a second hand toshiba Satellite M30-107 laptop, and decided to freshen it up.
I used the toshiba recovery disk, but after doing so the laptop no longer loads windows.
When turned on it shows the Toshiba start up disk for about a second then goes to a blank screen and freezes.
When turned off and on again a screen comes up reporting an error in shutting down and gives the options to start in safe mode etc. but choosing any of the options causes the machine to freeze.
Any help or advice would be much appreciated.
Thanks
jt

Hi
Sounds a little bit like the notebook does not boot due to the Windows software issue
Did you recover the M30 with the original Toshiba recovery CD which was supplied with this M30 unit?
Maybe Im wrong but for me it looks like a wrong recovery CD was used and an image with non compatible drivers was installed
You could try to install the OS from original Microsoft Win XP CD and could check if it would be possible to get the notebook ruining using clean OS.
In such case we ( you and me ;) ) could find out if this issue could be related to the software or hardware.
Bye

Cisco Nexus 5596 does not boots up after NX-OS upgrade 5.1.3.N1.1 to 6.0.2.N2.5 [CSCun66310]

Hello Friends,
Just want to save your precious time & effort, while doing Nexus 5596 upgrades so wanted to share some useful info which you can have a look prior to your upgrades of Cisco Nexus 5596 device.
I recently ran into trouble when upgarding one of datacenter switch Nexus 5596 does not boots up and after investigation from Cisco TAC it comes out to be Bug documented below.
https://tools.cisco.com/bugsearch/bug/CSCun66310/?reffering_site=dumpcr
My Upgrade path of device was : 5.1(3)N1(1)  to 6.0(2)N2(5).
Since this upgarde involves upgrade of Bios and Power sequensor, I was having some doubts to get this succesfully upgraded, But there was more twist involved in this upgrade which I came to know after contacting Cisco TAC for my died Nexus 5596 device and got info that if you have below impacted version in your Nexus 5596 device and you are planning to do Upgrade, then you migh RUN into this serious BUG aftre which device won't come up at all and only Option left is to replace with RMA device.
PID                          Impacted                   Hardware versions      Updated Versions
UCS-FI-6296UP                                            1.0                                       1.1
N5K-C5596UP                                              1.0                                        1.1
N5K-C5596T                                                 1.1                                         1.2
You can check hardware version using below command from your device.
5596# show sprom sup | inc H/W
H/W Version     : 1.1
So please be carefull when planning your Nexus 5596 upgrade and verify above things as this Bug is not present anywhere in Upgrade docuemntations unfortunately.
Hope this will help and save someone's precious Time.

Today "upgraded" our switch (N5k-C5596UP) to from 5.1(2)N1 to 7.0(5) and after reboot no life from the switch either. Even no console response. show sprom sup | inc H/W shows 1:0.
Only thing we could do is RMA the switch. So what must I do with these switches? Have still to do 3 of them.

Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

Hi,
I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
Tried manually start services, it started successfully but again goes down within few seconds automatically.
Reboot server. but no luck.
Any help.
MD

Hi,
I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
Thanks.
Niko Cheng
TechNet Community Support

Windows NT does not boot after installing NI-CAN 1.6.0 or security update

We are running Windows NT 4.0 SP 6 english with MS IE 5.5.
On one machine we had NI-CAN 1.6.0 installed. After installing the security update from Microsoft over the web the machine did not boot.
On another machine the security update was installed. After installing NI-CAN 1.6.0 the machine booted but hangs during logon. On this machine we installed Windows NT, MS IE 5.5 the security update and NI-CAN from new and the effect was the same.
Does anyone else have similar experience with this problem?
Machines with Windows 2000 and XP work well with NI-CAN 1.6.0.
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

Hi,
I haven't found any known issues. I going to try it out here. What's the security update you're installing?. I noticed there's a bunch of them in the Microsoft web site.
What CAN hardware do you have (PCI, PCMCIA, etc)?.
Let me know this details and I'll try to reproduce the problem.
DiegoF.
National Instruments.

Windows 7 does not boot after bootcamp installation

Hey!
I installed windows 7 x64 on my MBP 15" retina with bootcamp, and the installation went fine but after the installation when it said " prepairing your desktop" it just restarted and went into boot loop, so I had to boot into mac OSX and make it primary boot. This have happend 3 times, and I've recreated the ISO image on the USB and I've deleted windows 7 and the partition and I have done the whole process over again (3 times) and it still does not work. Sometimes I get into windows 7 the first time and can move around the desktop with the mouse for about 5 seconds, then it says "logging out" and I'm back at the same problem.
What can I do?
Best regards,
Jack Hellberg.

Hi Jack.........ok ive managed to create a link to that video on how to install bootcamp.....this is the tutorial i used and i managed to gain 100% completion on bootcamp 1st time no messing......like i said in my previous reply did you save the windows support files from apple....(Critical).....ok no point in messing about i suggest you start again from scratch........these are the things i used and YOU will need to complete bootcamp
mem stick or cd-r / dvd-r......original copy disc of win 7 ...i never used an iso i used original disc....allow a minimum of 30gb of space for your win 7 partition.....if you want bootcamp so you can use big programs like windows based games i.e.....Crysis/Call of duty etc etc ..then you will need to consider that you will need to allow a bigger partition to allow your HD to store the files.....this is the reason i installed bootcamp and so i made my partition i have a 750GB HD so i made a partition of 300gb for windows 7 and left the other 450gb for Mac....so you need to partition enough for what you want bootcamp for remember once you get bootcamp working you will need to install ALL Important Windows updates Including Win 7 SP1......once everything is installed you will have bootcamp up and running lovely.....u can then boot up with either win7 or mac......click this link and watch carefully and do exactly as shown ok and you should be fine...if you have any probs contact me again ok.....let me know how you get on ok..:)...http://www.youtube.com/watch?feature=fvwp&v=QFIWtXTl4d0&NR=1

Windows Explorer Does Not Refresh Automatically (Needs F5) AND Takes A Long Long Time To Make New File

In Windows 7, it will go into this state where it won't update folders automatically, and I have to hit F5, as well, if I go for example, New->Text Document - it will hang the desktop and take like 3-4 minutes before coming back and showing the file.
It is like something is preventing or slowing down the refresh of windows explorer.
It happens about once a day, sometimes I reboot to see if I can get it to go away.

Hi,
This kind of issue can be caused by several reasons, such as third party program, out-dated drivers.
To troubleshoot this issue, please perform the following steps:
1. Update BIOS and device drivers to the latest version.
2. If any security program is installed (anti-virus, firewall), please temporarily disable it
3. Test it in Clean Boot mode.
4. Reset Folder option:
Reset folders
==========
1. Click the Start button, type Folder Options in the Start Search box and press Enter.
2. Click View tab.
3. Click Reset folders.
4. Click Apply, click OK.
5. If it does not work, try a new account:
Create a new user account
====================
1. Click the Start Button, type User Accounts in the start search pane and press Enter.
2. Click Manage user accounts.
3. Click Create a new account, and type the name.
4. Choose account type as Computer administrator.
5. Click Create Account.
6. Log off and log on with the new account.
6. Use the following tool to remove third party extension:
ShellExView:
http://www.nirsoft.net/utils/shexview.zip
Hope it helps!
Vivian Xing - MSFT

Wifi does not connect automatically after sleep

Since installing Yosemite on my Mid 2011 iMac - when my computer wakes from sleep mode, it does not automatically connect to the wifi. I have to select the network to join from the top menu bar. Is there anyway to make it connect automatically like it use to? Thanks for any and all help!

Hello ffmed124,
The steps detailed below can help get your iMac to reconnect to your Wi-Fi network automatically after waking from sleep.
Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
Click the TCP/IP tab from the top of the screen.
Click the "Renew DHCP lease" button.
Select the Wi-Fi tab and view your Preferred Networks list.
Select each network and click the minus (-) sign to remove those networks from your Preferred Networks list.
Click OK and close the Network preferences.
Remove your stored network passwords using the Keychain Access Utility.
Open Keychain Access from /Applications/Utilities. Your window will look like this:
Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
Restart your computer.
Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Cheers,
Allen

Windows Service does not start automatically

Hi
I have a .NET 4.5 C# windows service, StartType set to automatic. It is running fine in server.
Few days ago, my server has windows update, including security update for .NET framework 4.5.1. Server auto restarted.
However, my service is not started.
By referring to eventlog, it shown as below sequence
1. Explorer initiated restart - Shutdown type - restart
2. Sql Server Service is stopped successully
3. My Service is stopped successully
-- Server restarted
4. Sql Server Service is in running state
5. My Service is stopped successully
Question is, why my service is stopped instead of running/started? I checked event log and my app log, no error at all.
Any ideas?
Thank you

I was thinking to set "SQL Server", but I am not sure what is the service name for the SQL service name.
Anyway to specify like "SQL Server *" ?
thank you
The default instance service name is MSSQLSERVER, and MSSQL$[name] for a named instance. If you're not sure what the instance is, you could check the services.msc or the registry value in this registry hive:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\InstalledInstances
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Login Window: Screen does not refresh correctly after waking 10.7.2 iMac and MacBook.

I have a client who brought to my attention that when we wakes his iMac and MacBook after the screen dims or sleeps at login screen, that sometimes the screen does not refresh correctly and you must use the cursor to basically "clear the screen." I have witnessed this myself and elimiated all third party products and this still happens. I am starting to believe that is is a bug in 10.7.2. Has anyone witnessed this or have any suggestions on how to remedy? Thank you.

Thanks lynque. It turns out I did need a keychain repair, but that didn't fix the problem. I probably should have done this earlier, but I ended up unplugging all peripherals (2 firewire + 3 USB) then powered up without issue.
So I shut down, plugged in one at a time, and ran into the problem again after plugging in an external hard drive (WD My Book Essential). I repaired with disk utility, but the problem remained.
I then rebuilt the partitions with Disk Warrior, and now everything seems to work....

Windows 7 does not boot anymore

Hi,
I have windows 7 operating system installed in my notebook. But suddenly my notebook is not booting anymore. I do have a backup image saved in a external hard drive, but can not install windows from there.
How can I re install windows 7 as I do not have a backup DVD.
Can anyone help me out?

Hay Munir
And how you have installed Win7 for the first time?
Jeka is absolutely right. You cannot start OS installation from image saved on external HDD.
I dont know which notebook model do you have but for Win7 installation you can use Microsoft installation disc. If your notebook model is supported for Win7 all necessary drivers, tools and utilities you can find on Toshiba support page. Just follow the link given by Jeka.

Computer does not sleep automatically after upgrading to Windows 8.1?

I have Windows 8.1 and my laptop will not sleep even though its settings are set on a time frame to automatically - used to sleep perfectly fine without any issues before on Windows 8. I'm sure I don't have any applications such as, Windows Media Player
running or etc. that prevents my computer from sleeping because I've tested it with no applications running and does the same thing. The only thing it does is dimming and turns of the display on time. This is frustrating and inconvenient that I always have
to manually sleep through power settings, please help me fix this!
**I've heard this isn't just my problem and many people also experience the same issue after upgrading to Windows 8.1**
Please see attached photo below:

Thank you for your suggestion, Carey Frisch! I've left homegroup but it doesn't seem to temporary band-aid the issue. I've tried the other solutions there but I'm left to no avail.
"Hopefully Windows 8.2, which is slated to drop in the first half of January 2014, will address this sleeping pandemic, for now we all have to leave with Microsoft’s shenanigans."
I hope Microsoft addresses this issue as I'm not the only user who has this problem and fixes it in a soon coming update! Do something about it Microsoft!
I guess all we can do is play the waiting game and hope Microsoft listens...

Oracle XE: Database does not mount automatically after Windows reboot

Hi,
after rebooting a Windows 2003 Server, the Oracle Services seem to start properly, but the database is not mounted.
However the database can be mounted manually via that SQL console.
How do I achieve that the database is mounted automatically?
Best regards, Erhard

Hi,
sorry I forgot to mention that I am new to Oracle.
Here's the reg key, so you can see all parms yourself:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE]
@=""
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_XE]
"StmtCacheSize"="0"
"NLS_LANG"="GERMAN_GERMANY.WE8MSWIN1252"
"ORACLE_HOME_NAME"="XE"
"ORACLE_BASE"="C:\\oraclexe\\"
"VERSION"="10.2.0.1.0"
"ORACLE_HOME_KEY"="SOFTWARE\\ORACLE\\KEY_XE"
@=""
"ORAMTS_CP_TRACE_LEVEL"="0"
"Type"=dword:00000057
"ORACLE_SID"="XE"
"ORACLE_HOME"="C:\\oraclexe\\app\\oracle\\product\\10.2.0\\server"
"ORAMTS_CP_TRACE_DIR"="C:\\oraclexe\\app\\oracle\\product\\10.2.0\\server\\oramts\\trace"
"StatementCacheSize"="0"
"OLEDB"="C:\\oraclexe\\app\\oracle\\product\\10.2.0\\server\\oledb\\mesg"
"ORA_XE_AUTOSTART"=hex(2):54,00,52,00,55,00,45,00,00,00
"ORA_XE_SHUTDOWN"=hex(2):54,00,52,00,55,00,45,00,00,00
"ORA_XE_SHUTDOWNTYPE"=hex(2):69,00,6d,00,6d,00,65,00,64,00,69,00,61,00,74,00,\
65,00,00,00
"ORA_XE_SHUTDOWN_TIMEOUT"=hex(2):39,00,30,00,00,00
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_XE\ODP.NET]
@=""
"TraceFileName"="C:\\ODPNET.trc"
"TraceLevel"="0"
"TraceOption"="0"
"StatementCacheSize"="10"
"Version"="10.2.0.100"
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_XE\OLEDB]
@=""
"CacheType"="Memory"
"ChunkSize"="100"
"DistribTX"="1"
"FetchSize"="100"
"OSAuthent"="0"
"PLSQLRset"="0"
"PwdChgDlg"="1"
"SchRstLng"="10000"
"UserDefFn"="0"
"DisableRetClause"="1"
"VCharNull"="1"
"TraceCategory"="0"
"TraceFileName"="c:\\OraOLEDB.trc"
"TraceLevel"="0"
"TraceOption"="0"
"SPPrmDefVal"="0"
"StmtCacheSize"="10"
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\OracleMTSRecoveryService]
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\OracleMTSRecoveryService\Protid_0]
"Name"="HTTP"
"Host"="ep-srv-01"
"Port"="2030"
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\OracleMTSRecoveryService\Setup]
"NumberOfInstalls"=dword:00000001
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\OracleMTSRecoveryService\Setup\All Versions]
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\OracleMTSRecoveryService\Setup\All Versions\1]
"Version"="10.2.0.1.0"
"Home"="C:\\oraclexe\\app\\oracle\\product\\10.2.0\\server"
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\OracleMTSRecoveryService\Setup\Current Version]
"Version"="10.2.0.1.0"
"Home"="C:\\oraclexe\\app\\oracle\\product\\10.2.0\\server"

Windows 2012R2 does not boot automatically after BSOD

Similar Messages

Maybe you are looking for