Windows 2k Clients could not registered with CSAMC 5.0

hi there,
My w2k clients could not registered with CSAMC, WinXP registered o.k. I am running CSA 5.0.176.
All clients in same TESTMODE group. Any idea ?
Thanks
ade

The CSAgent-Install.log will show you if any of the shims failed to load during the install.
The csalog.txt in the same directory will log communication problems. Look for an error code like one below (cut and pasted from the Networkers 2006 CSA Troubleshooting session slides):
OKENA_STATUS_LICENSE_REACHED_LIMIT = 2030
Number of registered hosts has exceeded the license count for that host type [desktop or server]
Resolution: delete unused hosts; automatically in 30 days or use search
OKENA_STATUS_REGISTRATION_NOT_ALLOWED = 2031
Usually a certificate issue
Resolution: Set agent to debug and triage using csalog.txt
OKENA_STATUS_INVALID_LICENSE = 2035
A license has expired or file format was not valid
Resolution: Delete expired license files
OKENA_STATUS_REGISTRATION_BACKOFF =2037
A number of conditions can trigger this; all are uncommon and need attention
Resolution: Set agent to debug and triage using csalog.txt

Similar Messages

  • The Fibre Channel Platform Registration Service could not register the platform with fabric

    Hyper-V Cluster. HP StorageWorks 82E 8 Gb PCI-e Dual Port FC HBA.
    Each 15 minutes, eventlog register a warning.
    EventID: 2 Source:2
    The Fibre Channel Platform Registration Service could not register the platform with fabric 10:00:00:05:1e:7f:74:7b.
    I have teste the service. And it's started. Cluster storage validation report without failure.
    Someone suggest any idea.
    Thanks.

    Hi,
    What’s the OS version of your cluster node?
    The Microsoft Fibre Channel Platform Registration Service registers the platform with all available Fibre Channel fabrics and maintains the registrations. A fabric is a network topology where devices are connected to each other
    through one or more high-efficiency data paths. This service is used in support of storage area networks.
    This service is installed by default on Windows Server 2008, and the service startup type is Manual.
    You may try hotfix in KB 978790, and check the result.
    For more information please refer to following MS articles:
    The File Share Witness resource is in a failed state even though the File Share Witness directory is available, and quorum cannot be maintained in a Windows Server 2008 failover cluster
    http://support.microsoft.com/kb/978790
    cluster resources unresponsive
    http://social.technet.microsoft.com/Forums/hu/winserverClustering/thread/886a9cb3-7723-4b64-8c15-602dadf5ced9
    Hope this helps!
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here.
    Lawrence
    TechNet Community Support

  • Network Policy Server windows 7 non domain wireless clients could not connect (Event id 6273 reason code 265)

    Hi,
    We have successfully configured network policy server on windows server 2012 and all wireless clients could connect to our network except windows 7 and xp non domain clients.The clients that are successfully authenticated includes windows 8,mobile users
    (andriod + iOS) domain as well as non domain clients.If we join windows 7 pc to the domain it  successfully connects but non domain clients could not connect.We have large number of windows 7 users that have their own laptop machines and we dont want
    each laptop to join the domain.
    On server event 6273 generated with reason code 265 "The certificate chain was issued by an authority that is not trusted".Plz help how to resolve this issue.I have searched on the internet but no proper solution found.

    Hi,
    According to the error message, it seems that you used certificate-based authentication methods and the non-domain computers has no Trusted Root Certificate for the CA that enrolled the certificate for the NPS.
    For more detailed information, please refer to the links below:
    Certificates and NPS
    Manage Trusted Root Certificates
    Best regards,
    Susie
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • TS2972 i can't access my home sharing in itunes ? :( when i fill up the apple i.d there's a pop-up window "Home sharing could not be activated because an error occurred (5506)" what's with that?

    i can't access my home sharing in itunes ? when i fill up the apple i.d there's a pop-up window "Home sharing could not be activated because an error occurred (5506)" what's with that?

    See:
    Troubleshooting Home Sharing
    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • Hi, sometimes big images could not open with photoshop.ı can open with windows but cant open photoshop.if ı try to open i am seeing a white image.is there any answer for this problem please.

    hi, sometimes big images could not open with photoshop.ı can open with windows but cant open photoshop.if ı try to open i am seeing a white image.is there any answer for this problem please.

    Just to assist those who might help you with this, please give the exact version of Photoshop CS6 you are running, for instance CS6 13.0.1.3.
    I had already asked for that in my previous post, but I guess you didn't quite know what I was referencing when I typed "exact version".
    Sorry, I cannot help you myself because I don't deal with that kind of 3D images, don't use Windows, and in all frankness I'm not quite following your last post.
    Also please give the exact model of your graphics card, so they can check whether it is on the list of cards tested by Adobe.
    Thank you.

  • Win 8.1 sfc /scannow returns Windows Resource Protection could not perform the requested operation.

    I am running Windows 8.1 Pro.
    I have been experiencing problems that lead me to believe the my component store is corrupted.
    When I run sfc /scannow sfc immediately comes back with "Windows Resource Protection could not perform the required operation.
    Here are the entries in the CBS file
     TI: --- Initializing Trusted Installer ---
    2014-01-21 10:45:59, Info                  CBS    TI: Last boot time: 2014-01-21 10:28:05.492
    2014-01-21 10:45:59, Info                  CBS    Starting TrustedInstaller initialization.
    2014-01-21 10:45:59, Info                  CBS    Ending TrustedInstaller initialization.
    2014-01-21 10:45:59, Info                  CBS    Starting the TrustedInstaller main loop.
    2014-01-21 10:45:59, Info                  CBS    TrustedInstaller service starts successfully.
    2014-01-21 10:45:59, Info                  CBS    No startup processing required, TrustedInstaller service was not set as autostart
    2014-01-21 10:45:59, Info                  CBS    Startup processing thread terminated normally
    2014-01-21 10:45:59, Info                  CBS    Starting TiWorker initialization.
    2014-01-21 10:45:59, Info                  CBS    Ending TiWorker initialization.
    2014-01-21 10:45:59, Info                  CBS    Starting the TiWorker main loop.
    2014-01-21 10:45:59, Info                  CBS    TiWorker starts successfully.
    2014-01-21 10:45:59, Info                  CBS    TiWorker: Client requests SFP repair object.
    2014-01-21 10:45:59, Info                  CBS    Universal Time is: 2014-01-21 16:45:59.014
    2014-01-21 10:45:59, Info                  CBS    Open of SC_BOOT_SERVICING_DONE event failed 2
    2014-01-21 10:45:59, Info                  CBS    Loaded Servicing Stack v6.3.9600.16470 with Core: C:\WINDOWS\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.16470_none_fa2491fd9b3cfcb2\cbscore.dll
    2014-01-21 10:45:59, Info                  CSI   
    00000001@2014/1/21:16:45:59.016 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffa54fd5929 @0x7ffa55266bda @0x7ffa55269a06 @0x7ff74300d25f @0x7ff74300dc17 @0x7ffa800d2385)
    2014-01-21 10:45:59, Info                  CBS    SQM: Initializing online with Windows opt-in: False
    2014-01-21 10:45:59, Info                  CBS    SQM: Cleaning up report files older than 10 days.
    2014-01-21 10:45:59, Info                  CBS    SQM: Requesting upload of all unsent reports.
    2014-01-21 10:45:59, Info                  CBS    SQM: Failed to start upload with file pattern: C:\WINDOWS\servicing\sqm\*_std.sqm, flags: 0x2 [HRESULT = 0x80004005
    - E_FAIL]
    2014-01-21 10:45:59, Info                  CBS    SQM: Failed to start standard sample upload. [HRESULT = 0x80004005 - E_FAIL]
    2014-01-21 10:45:59, Info                  CBS    SQM: Queued 0 file(s) for upload with pattern: C:\WINDOWS\servicing\sqm\*_all.sqm, flags: 0x6
    2014-01-21 10:45:59, Info                  CBS    SQM: Warning: Failed to upload all unsent reports. [HRESULT = 0x80004005 - E_FAIL]
    2014-01-21 10:45:59, Info                  CBS    NonStart: Set pending store consistency check.
    2014-01-21 10:45:59, Info                  CSI   
    00000002@2014/1/21:16:45:59.020 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffa54fd5929 @0x7ffa652e7fc0 @0x7ffa652e80f2 @0x7ff74300c9a5 @0x7ff74300dc2e @0x7ffa800d2385)
    2014-01-21 10:45:59, Info                  CSI    00000003 No store version format found; DLL store format 0.0.0.6
    2014-01-21 10:45:59, Error                 CSI   
    00000004@2014/1/21:16:45:59.027 (F) base\wcp\componentstore\storelayout.cpp(3854): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey expression:
    (null)
    [gle=0x80004005]
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CBS.log to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140121102547.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140114224141.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140104132548.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20131220204514.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20131215075547.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
    2014-01-21 10:45:59, Info                  CBS    Not able to add pending.xml to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-01-21 10:45:59, Info                  CBS    Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-01-21 10:45:59, Info                  CBS    Failed to get CSI system store [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
    2014-01-21 10:45:59, Info                  CBS    CSI store consistency check fails. [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
    2014-01-21 10:45:59, Info                  CBS    Failed to load component store [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
    2014-01-21 10:45:59, Info                  CSI    00000005 No store version format found; DLL store format 0.0.0.6
    2014-01-21 10:45:59, Error                 CSI   
    00000006@2014/1/21:16:45:59.051 (F) base\wcp\componentstore\storelayout.cpp(3854): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey expression:
    (null)
    [gle=0x80004005]
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CBS.log to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140121102547.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140114224141.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140104132548.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20131220204514.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20131215075547.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
    2014-01-21 10:45:59, Info                  CBS    Not able to add pending.xml to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-01-21 10:45:59, Info                  CBS    Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-01-21 10:47:59, Info                  CBS    Trusted Installer is shutting down because: SHUTDOWN_REASON_AUTOSTOP
    2014-01-21 10:47:59, Info                  CBS    TiWorker signaled for shutdown, going to exit.
    2014-01-21 10:47:59, Info                  CBS    Ending the TiWorker main loop.
    2014-01-21 10:47:59, Info                  CBS    Ending the TrustedInstaller main loop.
    2014-01-21 10:47:59, Info                  CBS    Starting TiWorker finalization.
    2014-01-21 10:47:59, Info                  CBS    Starting TrustedInstaller finalization.
    2014-01-21 10:47:59, Info                  CBS    Ending TrustedInstaller finalization.
    2014-01-21 10:47:59, Info                  CBS    Ending TiWorker finalization.
    Is there a way to rebuild the component store?
    Thanks,
    Glen

    Hey Glen,
    This log shows the exact same error that is mentioned in the comments of
    this blog post, and the response is:
    joscon [Microsoft]
    joscon [Microsoft]
    Thanks.  Unfortunately, this isn't good news.  The CanonicalData key is missing.
    2013-08-05 11:08:32, Error                 CSI    00000004@2013/8/5:09:08:32.471 (F) base\wcp\componentstore\storelayout.cpp(3617): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey
    expression: (null)
    [gle=0x80004005]
    Unfortunately, its a small, but unrecreatable subset of data.  If this is missing, servicing is broken on the machine and the system will need to be restored from backup or PBR.
    So you will need to try a refresh or a re-install of Windows, unfortunately.
    Hope this helps,
    David
    Windows Outreach Team - IT Pro
    The Springboard Series on TechNet

  • Could not register a HeartbeatMonitorListener

    Hi!
              Saw a different posting on this subject and have exactly the same
              problem. I have 2 local servers, one WLS 7 server and the other is
              Weblogic 8. I want messages sent to the WLS7 queue accessible from the
              WLS 8 queue. WLS 7 runs on port 7001, and WLS 8 on 8001.
              JMS Config for WLS 7:
              ============================
              - JMS Config factory:
              Name: WLS 7 Connection Factory
              JNDI Name: rps.refapp.jms.jms_connfactory
              - JMS Queue:
              Name: WLS7
              JNDI Name: jms.wls7.q
              Foreign JMS Config for WLS 8:
              =============================
              - Foreign JMS Server:
              Name:     MyJMSServer
              JNDI Initial Context Factory: weblogic.jndi.WLInitialContextFactory
              JNDI Connection URL: t3://localhost:7001
              - Foreign JMSConnection Factroy:
              Name: WLS 7 Connection Factory
              Local JNDI Name: jms.wls7connfactory
              Remote JNDI Name: rps.refapp.jms.jms_connfactory
              User Name: system
              Password: weblogic
              - Foreign JMS Destinations:
              Name:     WLS7
              Local JNDI Name: jms.wls7_queue
              Remote JNDI Name: jms.wls7.q
              I have an MDB deployed on the WLS 8 server with no funtionality except
              sending the contents of a message to system.out. Here is the contents of
              the weblogic-ejb-jar:
              <weblogic-ejb-jar>
              <description><![CDATA[Generated by XDoclet]]></description>
              <weblogic-enterprise-bean>
              <ejb-name>MessageListener</ejb-name>
              <message-driven-descriptor>
              <pool>
              <max-beans-in-free-pool>1</max-beans-in-free-pool>
              <initial-beans-in-free-pool>1</initial-beans-in-free-pool>
              </pool>
              <destination-jndi-name>jms.wls7_queue</destination-jndi-name>
              <initial-context-factory>weblogic.jndi.WLInitialContextFactory</initial-context-factory>
              <jms-polling-interval-seconds>5</jms-polling-interval-seconds>
              </message-driven-descriptor>
              <reference-descriptor>
              </reference-descriptor>
              <jndi-name>MessageListener</jndi-name>
              </weblogic-enterprise-bean>
              </weblogic-ejb-jar>
              And here is the stacktrace after deploying the bean:
              <2003-dec-15 kl 17:51 CET> <Notice> <WebLogicServer> <BEA-000327>
              <Starting WebLogic Admin Server "myserver" for domain "mydomain">
              <2003-dec-15 kl 17:52 CET> <Warning> <EJB> <BEA-010061> <The
              Message-Driven EJB: MessageListener is unable to connect to the JMS
              destination: jms.wls7_queue. The Error was:
              [EJB:010196]'weblogic.jms.common.JMSException: Error creating session'
              Linked exception = 'weblogic.jms.dispatcher.DispatcherException: Could
              not register a HeartbeatMonitorListener for
              [weblogic.jms.dispatcher.DispatcherImpl@1970ae0] for myserver'
              weblogic.jms.common.JMSException: Error creating session
              at
              weblogic.jms.frontend.FESession.setUpBackEndSession(FESession.java:798)
              at
              weblogic.jms.frontend.FESession.consumerCreate(FESession.java:1036)
              at weblogic.jms.frontend.FESession.invoke(FESession.java:2550)
              at
              weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.java:609)
              at
              weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:153)
              at
              weblogic.jms.client.JMSSession.consumerCreate(JMSSession.java:1814)
              at
              weblogic.jms.client.JMSSession.createConsumer(JMSSession.java:1645)
              at
              weblogic.jms.client.JMSSession.createReceiver(JMSSession.java:1484)
              at
              weblogic.ejb20.internal.JMSConnectionPoller.setUpQueueSessions(JMSConnectionPoller.java:1598)
              at
              weblogic.ejb20.internal.JMSConnectionPoller.createJMSConnection(JMSConnectionPoller.java:1833)
              at
              weblogic.ejb20.internal.JMSConnectionPoller.connectToJMS(JMSConnectionPoller.java:1076)
              at
              weblogic.ejb20.internal.JMSConnectionPoller.startJMSConnectionPolling(JMSConnectionPoller.java:830)
              at
              weblogic.ejb20.deployer.MessageDrivenBeanPoolInfoImpl.start(MessageDrivenBeanPoolInfoImpl.java:234)
              at
              weblogic.ejb20.deployer.EJBDeployer.deployMessageDrivenBeans(EJBDeployer.java:1583)
              at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1411)
              at weblogic.ejb20.deployer.EJBModule.start(EJBModule.java:668)
              at
              weblogic.j2ee.J2EEApplicationContainer.start(J2EEApplicationContainer.java:2017)
              at
              weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2058)
              at
              weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2005)
              at
              weblogic.management.deploy.slave.SlaveDeployer$Application.setActivation(SlaveDeployer.java:3136)
              at
              weblogic.management.deploy.slave.SlaveDeployer.setActivationStateForAllApplications(SlaveDeployer.java:1688)
              at
              weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:407)
              at
              weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:230)
              at
              weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
              at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:964)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:359)
              at weblogic.Server.main(Server.java:32)
              Caused by: weblogic.jms.dispatcher.DispatcherException: Could not
              register a HeartbeatMonitorListener for
              [weblogic.jms.dispatcher.DispatcherImpl@1970ae0] for myserver
              at
              weblogic.jms.dispatcher.DispatcherManager.dispatcherCreate(DispatcherManager.java:309)
              at
              weblogic.jms.dispatcher.DispatcherManager.dispatcherFindOrCreate(DispatcherManager.java:356)
              at
              weblogic.jms.frontend.FESession.setUpBackEndSession(FESession.java:796)
              ... 26 more
              Caused by:
              weblogic.rmi.extensions.server.HeartbeatMonitorUnavailableException:
              Could not register a HeartbeatMonitorListener for
              [weblogic.jms.dispatcher.DispatcherImpl@1970ae0]
              at
              weblogic.rmi.extensions.server.HeartbeatMonitor.addHeartbeatMonitorListener(HeartbeatMonitor.java:86)
              at
              weblogic.jms.dispatcher.DispatcherManager.dispatcherCreate(DispatcherManager.java:305)
              ... 28 more
              >
              Well, I'm out of ideas, so I hope someone can help me out. This is a
              fairly simple problem to duplicate. I can send more details as well.
              Thanks in advance,
              /Eje Thorarinsson
              

    Hi!
              Saw a different posting on this subject and have exactly the same
              problem. I have 2 local servers, one WLS 7 server and the other is
              Weblogic 8. I want messages sent to the WLS7 queue accessible from the
              WLS 8 queue. WLS 7 runs on port 7001, and WLS 8 on 8001.
              JMS Config for WLS 7:
              ============================
              - JMS Config factory:
              Name: WLS 7 Connection Factory
              JNDI Name: rps.refapp.jms.jms_connfactory
              - JMS Queue:
              Name: WLS7
              JNDI Name: jms.wls7.q
              Foreign JMS Config for WLS 8:
              =============================
              - Foreign JMS Server:
              Name:     MyJMSServer
              JNDI Initial Context Factory: weblogic.jndi.WLInitialContextFactory
              JNDI Connection URL: t3://localhost:7001
              - Foreign JMSConnection Factroy:
              Name: WLS 7 Connection Factory
              Local JNDI Name: jms.wls7connfactory
              Remote JNDI Name: rps.refapp.jms.jms_connfactory
              User Name: system
              Password: weblogic
              - Foreign JMS Destinations:
              Name:     WLS7
              Local JNDI Name: jms.wls7_queue
              Remote JNDI Name: jms.wls7.q
              I have an MDB deployed on the WLS 8 server with no funtionality except
              sending the contents of a message to system.out. Here is the contents of
              the weblogic-ejb-jar:
              <weblogic-ejb-jar>
              <description><![CDATA[Generated by XDoclet]]></description>
              <weblogic-enterprise-bean>
              <ejb-name>MessageListener</ejb-name>
              <message-driven-descriptor>
              <pool>
              <max-beans-in-free-pool>1</max-beans-in-free-pool>
              <initial-beans-in-free-pool>1</initial-beans-in-free-pool>
              </pool>
              <destination-jndi-name>jms.wls7_queue</destination-jndi-name>
              <initial-context-factory>weblogic.jndi.WLInitialContextFactory</initial-context-factory>
              <jms-polling-interval-seconds>5</jms-polling-interval-seconds>
              </message-driven-descriptor>
              <reference-descriptor>
              </reference-descriptor>
              <jndi-name>MessageListener</jndi-name>
              </weblogic-enterprise-bean>
              </weblogic-ejb-jar>
              And here is the stacktrace after deploying the bean:
              <2003-dec-15 kl 17:51 CET> <Notice> <WebLogicServer> <BEA-000327>
              <Starting WebLogic Admin Server "myserver" for domain "mydomain">
              <2003-dec-15 kl 17:52 CET> <Warning> <EJB> <BEA-010061> <The
              Message-Driven EJB: MessageListener is unable to connect to the JMS
              destination: jms.wls7_queue. The Error was:
              [EJB:010196]'weblogic.jms.common.JMSException: Error creating session'
              Linked exception = 'weblogic.jms.dispatcher.DispatcherException: Could
              not register a HeartbeatMonitorListener for
              [weblogic.jms.dispatcher.DispatcherImpl@1970ae0] for myserver'
              weblogic.jms.common.JMSException: Error creating session
              at
              weblogic.jms.frontend.FESession.setUpBackEndSession(FESession.java:798)
              at
              weblogic.jms.frontend.FESession.consumerCreate(FESession.java:1036)
              at weblogic.jms.frontend.FESession.invoke(FESession.java:2550)
              at
              weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.java:609)
              at
              weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:153)
              at
              weblogic.jms.client.JMSSession.consumerCreate(JMSSession.java:1814)
              at
              weblogic.jms.client.JMSSession.createConsumer(JMSSession.java:1645)
              at
              weblogic.jms.client.JMSSession.createReceiver(JMSSession.java:1484)
              at
              weblogic.ejb20.internal.JMSConnectionPoller.setUpQueueSessions(JMSConnectionPoller.java:1598)
              at
              weblogic.ejb20.internal.JMSConnectionPoller.createJMSConnection(JMSConnectionPoller.java:1833)
              at
              weblogic.ejb20.internal.JMSConnectionPoller.connectToJMS(JMSConnectionPoller.java:1076)
              at
              weblogic.ejb20.internal.JMSConnectionPoller.startJMSConnectionPolling(JMSConnectionPoller.java:830)
              at
              weblogic.ejb20.deployer.MessageDrivenBeanPoolInfoImpl.start(MessageDrivenBeanPoolInfoImpl.java:234)
              at
              weblogic.ejb20.deployer.EJBDeployer.deployMessageDrivenBeans(EJBDeployer.java:1583)
              at weblogic.ejb20.deployer.EJBDeployer.start(EJBDeployer.java:1411)
              at weblogic.ejb20.deployer.EJBModule.start(EJBModule.java:668)
              at
              weblogic.j2ee.J2EEApplicationContainer.start(J2EEApplicationContainer.java:2017)
              at
              weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2058)
              at
              weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2005)
              at
              weblogic.management.deploy.slave.SlaveDeployer$Application.setActivation(SlaveDeployer.java:3136)
              at
              weblogic.management.deploy.slave.SlaveDeployer.setActivationStateForAllApplications(SlaveDeployer.java:1688)
              at
              weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:407)
              at
              weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:230)
              at
              weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
              at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:964)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:359)
              at weblogic.Server.main(Server.java:32)
              Caused by: weblogic.jms.dispatcher.DispatcherException: Could not
              register a HeartbeatMonitorListener for
              [weblogic.jms.dispatcher.DispatcherImpl@1970ae0] for myserver
              at
              weblogic.jms.dispatcher.DispatcherManager.dispatcherCreate(DispatcherManager.java:309)
              at
              weblogic.jms.dispatcher.DispatcherManager.dispatcherFindOrCreate(DispatcherManager.java:356)
              at
              weblogic.jms.frontend.FESession.setUpBackEndSession(FESession.java:796)
              ... 26 more
              Caused by:
              weblogic.rmi.extensions.server.HeartbeatMonitorUnavailableException:
              Could not register a HeartbeatMonitorListener for
              [weblogic.jms.dispatcher.DispatcherImpl@1970ae0]
              at
              weblogic.rmi.extensions.server.HeartbeatMonitor.addHeartbeatMonitorListener(HeartbeatMonitor.java:86)
              at
              weblogic.jms.dispatcher.DispatcherManager.dispatcherCreate(DispatcherManager.java:305)
              ... 28 more
              >
              Well, I'm out of ideas, so I hope someone can help me out. This is a
              fairly simple problem to duplicate. I can send more details as well.
              Thanks in advance,
              /Eje Thorarinsson
              

  • Windows Live Mail could not be started. Closing Windows Live Mail. Your calendar contains corrupt data that is forcing Windows Live Mail to close. (0x8E5E0247

    Hi
    Can you please HELP??
    I recently had to change my hard drive for my laptop (Sony Vaio). The IT guy replaced my HDD and ghost all my information
    from old to new drive. Everything works perfect except for Windows Live Mail.
    When I open WLM I get this error:
    “Windows Live Mail could not be started. Closing Windows Live Mail. Your calendar contains corrupt data that is forcing
    Windows Live Mail to close. (0x8E5E0247)”
    I have since done the following:
    PROBLEM SOLUTION 1:
     1. Close Windows Live Mail and any other Windows Live programs.
     2. Click Start (then Run for
    Windows XP), paste the following path below and press Enter:
    %Localappdata%\Microsoft\Windows Live Mail\Calendars
    3. Rename the folder of the account you use to sign in to Windows Live Mail to
    sync your calendar (ex. rename [email protected] to [email protected]).
    4. Restart your computer for the changes to take effect.
     5. Launch Windows Live Mail again.
    THIS DID NOT WORK SO I DID THE FOLLOWING:
    PROBLEM SOLUTION 2:
    I removed WLM (uninstall) and reinstalled and still nothing.
    PROBLEM SOLUTION 3:
    I also renamed the WLM folder and reinstalled WLM, then deleted the new WLM folder and still nothing.
    PROBLEM SOLUTION 4:
    I also tried to import my emails from WLM to Microsoft Outlook but I only have a copy of my mails from the directory. 
    I do not have an EXPORT copy saved anywhere. Is there any way I can export the WLM to Microsoft outlook?
    PLEASE HELP I AM AT WITS END.

    I have had many problems with permissions on Windows Vista, 7,8 & 81.1.  It is usually after an update or installation, especially one that requires a reboot to finish (some AVG, Windows Live, Windows Updates, etc).  Once File(s), Folder(s)
    and Registry Key(s) permissions are screwed up, it can take days to work them out if ever.
    After having spent several hours on a clients PC and online forums with this problem.  I transferred her user profile with a free program called
    Transwiz (run as Administrator) to a zip file on the HDD.  I renamed her user in manage User Accounts to "Username old".  I then ran Transwiz again to restore the profile but telling it to create a new user using the original Username.
     After it completed restoring the profile, I logged out of "Username old" and logged in to Username and all wass well, I only needed to supply the email password which is not transferred.  When you move profile data, all the old permissions
    have to be removed and <st1:personname w:st="on">new</st1:personname> permissions added so the data and files belong to the <st1:personname w:st="on">new</st1:personname> user.  This cleared up all the permission
    problems.
    James Taylor

  • Server 2008 TS - some client could not connect to the server

    Hi guys,
    I have a Server 2008 x64 Terminal Server with license server (some machine) and installed device CALs.
    I can connect with Windows 7 client to Terminal Server by RDP (TS assign device CAL to every connected machine automatically) without problem, but I get this error message if I try connection with Motorola (Symbol) MC8080 mobile scanners:
    "Because of a security error, the client could not connect to the remote computer.
    Very that you are logged on the network, and then try connecting again."
    I tried different settings by KB2477176 and activate/deactivate server, but it didn't solve the problem.
    http://support.microsoft.com/kb/2477176/hu
    (These scanners can connecto to another Terminal Server.)
    Is it client or server-side issue?
    Have you another idee?
    Regards,
    Gabor

    Hi,
    Thank you for posting in Windows Server Forum.
    Please again cross check whether you have properly configured certificate attached with the server. Because the error which you are facing is generally due to corrupted certificate on server side. As you have already tried, I again want you to back up the registry
    setting and then remove the X509 certificate registry key under below mention path, restart the computer and reactivate the RD Licensing Server. 
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM
    You can also refer below article for additional information.
    How to resolve the issue “Remote Desktop Disconnected” or “Unable to
    Connect to Remote Desktop (Terminal Server)”
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Client could not establish a connection to the remote computer

    Sir we are using Windows 2008 Server standard licence edition and using Microsoft Cal open licence  (Total 25). Our system are working from smoothly from 1 years. But from one week we have facing client could not establish a connection to the remote
    computer.
    Sir I am talking from Integral Bank, Jaipur Sir please solve our problem.
    With warm regards,
    Hariom
    M-09875156100
    mail : [email protected]

    Sir we are using Windows 2008 Server standard licence edition and using Microsoft Cal open licence  (Total 25). Our system are working from smoothly from 1 years. But from one week we have facing client could not establish a connection to the remote
    computer.
    Sir I am talking from Integral Bank, Jaipur Sir please solve our problem.
    With warm regards,
    Hariom
    M-09875156100
    mail : [email protected]

  • SOLUTION to THE WINDOWS INSTALLER SERVICE COULD NOT BE ACCESSED...Vista x64

    I spent the better part of a month looking for the solution to this. My mom recently purchased a new computer that came with Vista Home Premium (64bit) preinstalled. Although we were able to install all of her other programs that were 32 bit, when we downloaded the 64bit Itunes from the website we received the error:
    "The Windows Installer service could not be accessed, This can occur if you are running Windows in Safe Mode, or if the Windows installer is not correctly installed. Contact your support personnel for assistance."
    I tried everything from unregistering and then re-registering the msiexec files in both the system32 folder and the sysWOW64 folder. I tried editing the registry and changing the windows installer imagepath to the SysWOW64 folder. I tried running it with UAC on and then off and from the true Administrator account, etc....nothing solved the issue.
    Finally, the other day I was searching the problem out and came upon this blog:
    http://blog.thinksharp.nl/
    I changed the key
    HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\MSIServer\WOW64
    from a 1 to a 0.
    I then stopped and restarted the Windows Installer Service by using services.msc.
    After this approach, Itunes and quicktime finally installed without a hitch and my mom is finally able to use her Ipod again.
    Just wanted to post this as it might help others that are having the same problem. There are many postings elsewhere on the net about this issue with just as many solutions...none of which worked for me except this one.
    Thanks!

    Wow! Thank you so much for posting this. I have been crazily hunting for a fix to this using Google search. Guess I should have visited this forum instead as that would have save me some time!

  • Windows Update Client failed to detect with error 0xc8000247 after using Lenovo System Update 5

    My Windows 7, SP1 was running fine, until I installed few updates on 10/15 using Lenovo System Update 5 then Windows Update stopped working, shows as RED:
    {CE3119AD-35EF-41CF-9C21-C7698FEB8393}    2013-10-14 21:53:00:256-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Software Synchronization    Windows Update Client successfully detected 4 updates.
    {EB17A01A-EB6E-49FF-9EA2-AA0DD063B4B1}    2013-10-15 04:15:54:069-0700    1    162    101    {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}    201    0    AutomaticUpdates    Success    Content Download    Download succeeded.
    {77DAE88F-2795-4258-8BBF-8D27E53662CF}    2013-10-15 12:10:38:196-0700    1    193    102    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Content Install    Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates:  - Security Update for Windows 7 for x64-based Systems (KB2862330)
    {1398F777-3AEF-4D1D-BE4C-407EC4AEAD4C}    2013-10-15 12:15:25:676-0700    1    183    101    {C61A0D00-3E51-48AC-B0AF-1D3E02B9E5D3}    201    0    AutomaticUpdates    Success    Content Install    Installation Successful: Windows successfully installed the following update: Security Update for Windows 7 for x64-based Systems (KB2862330)
    {A220898A-E5FE-4FE7-8413-2B0C7B4013D0}    2013-10-15 12:15:25:766-0700    1    202    102    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Content Install    Reboot completed.
    {A5400FF2-33ED-4A47-8409-13E5DFE16A6D}    2013-10-15 19:29:31:486-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    ChkWuDrv    Success    Software Synchronization    Windows Update Client successfully detected 0 updates.
    {43C533EE-775D-445E-A652-06648B72DE65}    2013-10-15 19:29:49:702-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    ChkWuDrv    Success    Software Synchronization    Windows Update Client successfully detected 0 updates.
    {D6AAAFFB-7F18-4A7E-B39D-1BA09CDC5E6D}    2013-10-15 19:30:05:744-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    AutomaticUpdates    Success    Software Synchronization    Windows Update Client successfully detected 3 updates.
    {4E73B1C1-5BA2-415D-AB34-92F7AB3DB418}    2013-10-15 19:30:08:753-0700    1    147    101    {00000000-0000-0000-0000-000000000000}    0    0    ChkWuDrv    Success    Software Synchronization    Windows Update Client successfully detected 0 updates.
    {51248882-41AC-4E59-B813-87AD326310AD}    2013-10-15 20:00:05:044-0700    1    183    101    {DBD3B4E9-0357-47DA-8317-D0CF2163BFE6}    501    0    wusa    Success    Content Install    Installation Successful: Windows successfully installed the following update: Hotfix for Windows (KB2661796)
    {FB2B8E5E-442C-4E76-B23D-6A41B4324C9D}    2013-10-16 00:11:39:832-0700    1    148    101    {00000000-0000-0000-0000-000000000000}    0    c8000247    AutomaticUpdates    Failure    Software Synchronization    Windows Update Client failed to detect with error 0xc8000247.
    Lenovo Thinkpad W500, Intel (R), Windows 7, SP1, latest updates as of Oct 15
    (1) Checked Setting,  set to automatic update whenever, even changed to never update, rebooted the OS and changed back to automatic update and rebooted the OS.
    (2) Stopped Windows Update Services, renamed SoftwareDistribution folder and started the window update services and rebooted.
    (3) Ran MS FIXIT
    (4) Ran System File checker Scan (sfc /scannow)
    (5) Ran CHKDSK /F
    (6) Installed "Intel Rapid Storage Technology" drivers from Lenovo site
    (7) Ran Update for Windows 7 for x64-based Systems (KB971033)
    None of the above possible recommended solutions were able to fix the issue yet and now I am getting a message your Window is Not Genuine!
    Any help or guidance is appreciated.
    Solved!
    Go to Solution.

    The Lenovo System Update installed the "Intel Matrix Storage Manager driver 8.9.2.1002" right before the Windows Upgrade got broken. So in the Device Manager under IDE ATA/ATAPI Controllers, I choose Intel ICH9M-E/M SATA AHCI Controller, on the Driver Tab, I choose the option "Roll Back Driver" and after rolling back the driver and restarting the OS, now Windows Update is working like a Champ!
    The End!

  • MBP will not register with iCloud servers (and most iCloud features + Handoff and Continuity do not work)

    Hi all,
    I have an extremely strange issue on my rMBP which has not been solved yet despite over 2 hours on the phone with Apple support, and another hour after being put through to a Senior Advisor, and several online chats.
    I have a Apple Certified Refurbished Late 2013 Retina Macbook Pro, which has a 2.3Ghz i7, 16GB of RAM, 500 Flash Storage and the NVIDIA discrete graphics. It was purchased in December 2014 on the Apple Store. It is running 10.10.2.
    For some reason, my computer WILL NOT register with iCloud. Messages and Facetime both would not work, my iPhone 4S which is capable of text message forwarding would not recognise it and allow me to turn it on. Handoff, Continuity and Instant Hotspot - basically any of the features to do with iCloud or connecting to another device - do not work.
    Originally I believed it was just an issue with Messages and Facetime so I reinstalled the OS back to 10.10.1, but that did not solve the problem. All my Messages contacts kept on coming back as 'not registered with iMessage' and I could not turn on SMS Relay either.
    I contacted Apple on Wednesday night and ended up talking to several different people, the Senior Advisor was the most helpful - really tried to help me figure out what was wrong, and to fix it - wonderful help, really was. They used screen sharing and were quite confused. They figured out as well that Handoff, Instant Hotspot, and all those other features don't work either. At this point, they made me update to 10.10.2 to see if it was an issue with the update, but to no avail.
    Eventually, the SA checked my iCloud account and saw that the computer hadn't even connected to iCloud, and wasn't even showing up as one of my devices, despite the fact that I had signed into iCloud on this computer.
    The SA told me that he suspected it must have been something to do with hardware, but didn't know what it could be. He said the only time he had seen this before was on a refurbished laptop when the serial number hadn't been put back on, but my serial number was there, so he said it must have been something to do with Bluetooth or Wifi.
    Wireless seems to work completely fine, but there is a strange thing with Bluetooth in which within System report says that the computer is not discoverable or connectable, despite the fact that in the Menu Bar it says it is on and discoverable. It becomes discoverable and connectable once you toggle the switch in System Preferences.
    I was planning to book a Genius Bar Appointment as suggested by the SA, but something strange happened today - all of a sudden, some (not all of them) of my iMessages from earlier today came through. Still no working Handoff or Facetime or Continuity, but now I am starting to wonder what is really wrong.
    Despite the fact they said it was hardware (especially Bluetooth), what could explain why it (seldom) or will not register with iCloud? Can anybody shed some light on the situation and whether a Genius Bar appointment could help fix it?
    Cheers and thanks in advance.

    Needed to add some clarification here:
    iCloud shows me as signed in, but Calendars are NOT checked
    Internet Accounts shows Calendars as syncing

  • 11gR2 Install Error, Listener is not up or database service is not registered with it

    Hi all,
    I'm currently studying towards my OCA, I've passed 1z0-051 (SQL Fundementals I), and now I'm moving onto 1z0-052 (Admin 1).
    Im really having trouble creating a database in Oracle 11g R2 Enterprise Edition. I install the software no problem. Then I create a database, and during the creation I have to createsa listener which uses TCP (default port:1521) and IPC. whilst creating the database I get the following error
    'Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM configuration Assistant again.'
    Now, before you lynch me, I have searched this forum for answer to this for a day and a half. I've also tried google, i just can't find a answer that sorts out my problem. please assist me.
    I'm running on Windows 7 Professional (32bit) (I have previously tried on the 64 bit version with teh same results).
    Here's teh contents of my listener.ora file:
    # listener.ora Network Configuration File: C:\app\Damien\product\11.2.0\dbhome_1\network\admin\listener.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = C:\app\Damien\product\11.2.0\dbhome_1)
    (PROGRAM = extproc)
    (ENVS = "EXTPROC_DLLS=ONLY:C:\app\Damien\product\11.2.0\dbhome_1\bin\oraclr11.dll")
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = ipc))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.4)(PORT = 1521))
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    ADR_BASE_LISTENER = C:\app\Damien
    Here's the contents of my tsnames.ora:
    # tnsnames.ora Network Configuration File: C:\app\Damien\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
    (SID = CLRExtProc)
    (PRESENTATION = RO)
    Here is the last fe lines of my emConfig.log:
    Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
    CONFIG: isLocalConnectionRequired: true
    Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
    Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
    CONFIG: SQLEngine connecting with SID: orcl, oracleHome: C:\app\Damien\product\11.2.0\dbhome_1, and user: SYSMAN
    Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
    CONFIG: SQLEngine created successfully and connected
    Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
    CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)
    at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1903)
    at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3230)
    at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
    at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
    at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
    at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
    at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
    at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
    at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
    at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
    at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
    at java.lang.Thread.run(Thread.java:595)
    Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig perform
    SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
    Refer to the log file at C:\app\Damien\cfgtoollogs\dbca\orcl\emConfig.log for more details.
    Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig perform
    CONFIG: Stack Trace:
    oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
    at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
    at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
    at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
    at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
    at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
    at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
    at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
    at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
    at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
    at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
    at java.lang.Thread.run(Thread.java:595)
    Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig restoreOuiLoc
    CONFIG: Restoring oracle.installer.oui_loc to C:\app\Damien\product\11.2.0\dbhome_1\oui
    My Listner status output is here:
    LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 18-JAN-2014 10:14:39
    Copyright (c) 1991, 2010, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=ipc)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
    Start Date                18-JAN-2014 09:27:34
    Uptime                    0 days 0 hr. 47 min. 6 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   C:\app\Damien\product\11.2.0\dbhome_1\network\admin\listener.ora
    Listener Log File         c:\app\damien\diag\tnslsnr\LONDON\listener\alert\log.xml
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\ipcipc)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.4)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
      Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    I can login as sys into my database through sqlplus, so it seems the database is up and running, it just seems to be a listener problem maybe??
    Many thanks for any assistance that you give. I'm learning so be gentle...
    Damien

    SOLVED!
    OK all solved now, thanks to the link to Ed Stevens website that Baris posted (mucho respect )
    Seems that like Barus said I was not using Dynamic Registration, which means that I would need to manua
    ly update the listerner.ora file. On top of that it seems that for some my tnsnames.ora wasn't resolving mt database name so the tnsping wasfailing.
    What I did to solve the name resolution problem
    1. Opened the
    Network Configuration Assistant and saw that my listener didnt have my DB registered with it. So I added it. What this horrible GUI tool does is update the tnsnames and listener.ora files for you. So once that was done I went to the command prompt and did ;'tnsping <dn name> and hey presto it was getting a nice response.
    Then I re-ran my DB Configuration Assistant and tried to reconfigure my database. However it aing failed and gave me the same message that I was originally getting about the DB Service not being registered etc..the lister status still said that same thing:
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
      Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    the 'unknown' means that the DB  didnt tell the listener that it was there but instead the listener is in manual mode and will just use the configuration in the listener.ora to know where the DB is.
    So then I followed the steps on the ED Stevens website (follow the link). He has steps which show how to enable Dynanmic registration so that your DB regusters itself with the listener. In a nutshell, he states that he listener actually doesnt need the listerner.ora if using dynamic registration. I shutdown the DB, stopped the listener then I renamed the lsitener.ora to listerner.old, then started the lietener and checked the status and it said 'the listener supports no service' I then started the DB and, then resched teh listener status, it then read 'status: READY'... hooray!, the DB had dynamically registered itself with the listener. I then was able to successfully start up and run Enterprise Manager.
    Thanks for all your help Baris, and Ed Steven website.
    I know more now than when I started so I'm happy.
    Thanks.

  • I am getting the message "The windows installer Service could not be accessed when trying to install Itunes on my new computer, any help would be appreciated.

    I am getting the message "The windows installer Service could not be accessed when trying to install Itunes on my new computer, any help would be appreciated.

    Hey there Frank0619,
    If you have not been able to install iTunes because the Windows Installer service is not available, I would recommend the troubleshooting in the following troubleshooting to help.
    Issues installing iTunes for Windows
    These in particular: 
    Make sure you have an administrator account.
    To install iTunes, you'll need to log in to your computer with an administrator password. If you're not sure if you have an administrator account, read Windows 7: How do I log on as an administrator? You could also refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
    Install the latest Microsoft Windows updates.
    To download the latest updates, visit the Microsoft Windows Update website. iTunes for Windows requires Windows XP, Windows Vista, Windows 7, or Windows 8 with the latest Service Pack installed. If you can’t install the updates, refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
    Download the latest version of iTunes.
    The latest version of iTunes can be downloaded at http://www.apple.com/itunes/download/.
    Disable conflicting software.
    Some Windows background processes can cause issues for other programs and processes. These conflicts can prevent applications, such as iTunes, from installing. Disable conflicting processes by starting your computer using MSConfig: 
    Using Msconfig to troubleshoot conflicts in Windows XP
    Using Msconfig to troubleshoot conflicts in Windows Vista, Windows 7, and Windows 8
    Some security software made by other companies can't be disabled using MSConfig. If you've installed security software and you're having issues installing iTunes or QuickTime for Windows, you might need to disable or uninstall security software to resolve installation issues.
    Restart your computer.
    Install iTunes.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

Maybe you are looking for