Windows 2k3 - wsus continues to claim update needed despite being installed
I'm having an issue with my Windows 2003 servers detecting an installed update. I've installed the update and can verify it was installed from the "Review your update history" page
on the Windows Update site.
We are using a WSUS server to deploy updates. The WSUS server continues to report that I need to install this update. Any ideas?
Hi,
Does this client reports properly? Please check the report of this client in the WSUS administration console.
If the report is correct, could you provide the detailed name of the update? It may give some hints.
Best Regards.
Steven Lee
TechNet Community Support
Similar Messages
-
I'm setting up a simple, two node, cluster in Server 2012R2. When doing the Validation test it states that the updates on one of my nodes is not up to date. However, upon further investigation, I've found that most, if not all, updates the
test is telling me needs to be installed are installed. I have two other clusters that are set up the same way, the validation test came up good across the board and they have linked up nicely, but this one will not perform correctly. The only
difference between the three is the updates showing out of sync on the one cluster. Any help would be greatly appreciated.Hi,
So the Clusters are fully patched and also running UR1 and did a reboot ?
and the updates are installed as shown in the update manger list.
what you could do is stop the Update service and delete the C:\Windows\SoftwareDistribution folder.
When starting the services it will recreate the folder ;-) then reboot the cluster and start validation.
Greetings, Robert Smit Follow me @clustermvp http://robertsmit.wordpress.com/ “Please click "Vote As Helpful" if it is helpful for you and Proposed As Answer” Please remember to click “Mark as Answer” on the post that helps you -
What Microsoft Updates are really being installed?
I’m updating Win 7 64 Bit PCs using WSUS. On the PCs. In “Windows Update, “You receive updates:” is set to “Managed by your system administrator”.
The problem is determining what was installed. WSUS installs doesn’t jive Control Panel>All Control Panel Items>Programs and Features>View Installed Updates or Control Panel>All Control Panel Items>Windows Update>View update history.
In WSUS, 20 updates were installed, including 2 Office updates. In “Control Panel\All Control Panel Items\Windows Update\View update history”, 12 updates were installed on that day, including the 2 Office updates. The “Control Panel>All Control Panel
Items>Programs and Features>View Installed Updates” shows 40 Office updates alone were installed on that day.
What’s going on? How can I tell what updates are being installed?Hi,
We might take use of the status reports:
WSUS 3.0 SP2 Reports
We could generate three reports:
1. Update Reports: provide the status of the updates;
2. Computer Reports:show you the status of computers;
3. Synchronization Reports: enables you to see synchronization information for the WSUS server for a given time period, including errors that occurred during synchronization and a list of new updates. In addition, you can get general, status, and revision
information for each new update.
More detailed information, please check the link above.
Besides, we might consider seek help in WSUS forum and see if experts there could share some insights about this.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverwsus
Hope this may help
Best regards
Michael Shao
TechNet Community Support -
Hi gurus
installed Essbase 11.1.2.1.0 successfully on windows w2k3 ent srever 32 bit
can I change the host name to include domain name
currently it is
xxx.xx.xxx.xxx somehost
can it be changed to
xxx.xx.xxx.xxx somehost.local.com somehost
is hostname hardcoded anywhere in essbase (or obiee)?Host name : would be computer name
domain name: security asigned in the network ( i hope)
so you can login via your ipadress , host name(localhost),(computername ), and assigined computername_domainname
but if u see in ur pc where C:\WINDOWS\system32\drivers\etc\host...u can see the localhost information
in my case while installing , it took domain name +computername
Hyperion is such smart application it takes host name while installation and after installation even it takes name as localhost also.
Unless ur authorised to change the domain name but i dont hope ur infra team will be able to allow you it -
Adobe Creative Cloud CC Update is not being installed - error code 50
Hi,
I'm trying to update my Adobe Creative cloud client to the current version
At exactly 50% the installation stops and the message "Creative cloud could not be updated, error code 50" appears.
What can I do?The above solution should work ,
However , if still face issue ,
Try below steps (Windows)
1) Uninstall Adobe Creative Cloud from Control panel.
2)Open C:drive and navigate to C:\Program Files (x86)\Common Files\Adobe.
Open Adobe folder and delete folders named Adobe Application Manager and OOBE.
3)
Navigate to C:\Program Files (x86)\Adobe.
Open Adobe folder and if present delete Adobe Creative Cloud folder.
4)
Press Windows button (located between Ctrl and Alt buttons) along with R button together at a time , you will get a run command window.
Type in below command and hit 'Enter' key.
appdata
Then navigate to Local>Adobe.
Open Adobe folder and delete folders named AAMUpdater and OOBE.
5)Run the Adobe Cleaner tool , if present remove Creative Cloud Desktop or Adobe Application manager.
https://helpx.adobe.com/content/help/en/creative-suite/kb/cs5-cleaner-tool-installation-pr oblems/_jcr_content/main-pars/…
6)
Click on the below link and download Creative Cloud setup and then right click on it and select " Run as Administrator" .
https://creative.adobe.com/products/creative-cloud -
5.4.1 Update is not being installed
Hi,
after the automatic download got the Airport Utility 5.4.1 update, the MAC restarts. So far so good.
Starting the Airport Utility it keeps telling me that there is a new update available (5.4.1). Options are 'Cancel' and 'Update'. Clicking 'Update' starts the Apple update process with the result that there is no new update available and the Airport Utility quits. Choosing 'Cancel' lets me work with the software, even update the firmware.
A manual download and installation of the update did not work either and this happens on my iMAC as well as on my MBP.
Has anyone an idea what is causing this and how I'm able to update my software?The above solution should work ,
However , if still face issue ,
Try below steps (Windows)
1) Uninstall Adobe Creative Cloud from Control panel.
2)Open C:drive and navigate to C:\Program Files (x86)\Common Files\Adobe.
Open Adobe folder and delete folders named Adobe Application Manager and OOBE.
3)
Navigate to C:\Program Files (x86)\Adobe.
Open Adobe folder and if present delete Adobe Creative Cloud folder.
4)
Press Windows button (located between Ctrl and Alt buttons) along with R button together at a time , you will get a run command window.
Type in below command and hit 'Enter' key.
appdata
Then navigate to Local>Adobe.
Open Adobe folder and delete folders named AAMUpdater and OOBE.
5)Run the Adobe Cleaner tool , if present remove Creative Cloud Desktop or Adobe Application manager.
https://helpx.adobe.com/content/help/en/creative-suite/kb/cs5-cleaner-tool-installation-pr oblems/_jcr_content/main-pars/…
6)
Click on the below link and download Creative Cloud setup and then right click on it and select " Run as Administrator" .
https://creative.adobe.com/products/creative-cloud -
RAC on Windows 2k3 using NAS.
Hi All
I am planning to install RAC on Windows 2k3.
Please anyone upload or post a link to the documentation on installing the RAC on Windows 2k3 using NAS.
Thanks a ton in advance.
-BalHi
I searched a lot but didnt get anything. I am stuck becoz we dont have system admin or storage admin available.
I have 2 Dell 2950 PowerEdgde Servers and 500 GB Buffalo NAS with Windows 2K3 X64 EE, please tell me whether I can install Oracle RAC with this kit.
If yes , how can I configure shared storage and present it to OS so that both nodes can see it.
Please give as much detail as possible, I m ready to read a million pages.
Please help.. -
trying to set up a linksys router but the cd says it works with OSX 10.6 and later. I am currently running the newest version of mountain lion.... what is the matter with this OSX update needed?
Your install disk must look like this
and not like this.
Those gray disks are machine specific and will only work with model of Mac that they shipped with. -
Scripted Gateway Password - Update Needed
Hello,
I am implementing a Scripted Gateway RA. Everything works fine, however when I add password to the resource attributes the account shows as 'Update Needed' after being created. The account is created fine, can be updated and deleted no problem. Remove the password attribute, or use a custom password field and there is no 'Update Needed' warning. Has anyone seen this before, know what I may be missing or know of a possible work around?
Thanks in advance for any info.Try change your user profile pic to a default one and restart, the name should be back to normal.
For the loading bar, Apple said it is normal because the spinning gear was replaced by this. -
Downloaded Mountain Lion update but couldn't install it and now it's gone.
Hi.
I bought a Macbook Pro today, asked for the redeem code to download Mountain Lion update and received it OK. After the update downloaded, it said there was an error and the update disappeared without being installed. I can't download it again because the code has been used, help please, no idea what to do.
Thanks!
RicardoIn the app store, click purchases at the top , and download there.
If it's not visible, click "store" on the top bar and "view my account." You can unhide it there.
If you had a problem downloading, before you do either of the above, you may want to trash the contents of /var/folders/ (found by "go to folder" in finders "go" menu, top bar). -
Windows WSUS 3.276 on Windows Server 2008 R2 not deploying updates to Clients
Update Services
Microsoft Corporation
Version: 3.2.7600.226
Updates services is downloading Current updates for the platforms I selected.
It is finding and interfacing with all windows computers are the network.
I select updates to install to computer groups but they are not getting installed.
You can see from the report it needs to install 41 updates but they are not being installed.
Why are the not getting installed?
"No events are available. This may be because the client has not yet sent the event or the events have been purged from the server. Please refer to %WINDIR%\WindowsUpdate.log on robtruet-pc.leopold.int for details."
The Report for most of the Clients show.
0 updates failed to install.
40 updates have not been installed
0 updates have been install or not applicable.
0 updates have unknown status.
I login to the client and it shows Windows is up to date. But I look at updates installed history and now updates exist for the last 60 days.
I included the log from the client below for one day.
2015-03-04 23:27:18:212 1184 ae8 Handler Using CBS interface ICbsSession7
2015-03-04 23:27:23:407 1184 ae8 Agent * Found 0 updates and 77 categories in search; evaluated appl. rules of 1448 out of 2726 deployed entities
2015-03-04 23:27:23:500 1184 ae8 Agent *********
2015-03-04 23:27:23:500 1184 ae8 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-03-04 23:27:23:500 1184 ae8 Agent *************
2015-03-04 23:27:23:578 1184 84c AU >>## RESUMED ## AU: Search for updates [CallId = {D60CD7C9-6547-413B-AB87-35F737F8BA18}]
2015-03-04 23:27:23:578 1184 84c AU # 0 updates detected
2015-03-04 23:27:23:578 1184 84c AU #########
2015-03-04 23:27:23:578 1184 84c AU ## END ## AU: Search for updates [CallId = {D60CD7C9-6547-413B-AB87-35F737F8BA18}]
2015-03-04 23:27:23:578 1184 84c AU #############
2015-03-04 23:27:23:578 1184 84c AU Successfully wrote event for AU health state:0
2015-03-04 23:27:23:578 1184 84c AU Featured notifications is disabled.
2015-03-04 23:27:23:578 1184 84c AU AU setting next detection timeout to 2015-03-05 09:22:52
2015-03-04 23:27:23:578 1184 84c AU Setting AU scheduled install time to 2015-03-05 08:00:00
2015-03-04 23:27:23:578 1184 84c AU Successfully wrote event for AU health state:0
2015-03-04 23:27:23:609 1184 84c AU Successfully wrote event for AU health state:0
2015-03-04 23:27:28:539 1184 ae8 Report REPORT EVENT: {1A5F7E5E-1B5A-4E13-A21C-489D2906CB75} 2015-03-04 23:27:23:485-0500 1
147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 0 updates.
2015-03-04 23:27:28:539 1184 ae8 Report REPORT EVENT: {3FA6CBE2-31F4-4D8E-9E44-47EDCC077FCC} 2015-03-04 23:27:23:500-0500 1
156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting
client status.
2015-03-04 23:27:28:555 1184 ae8 Report CWERReporter finishing event handling. (00000000)
2015-03-04 23:39:15:718 1184 ae8 Report Uploading 2 events using cached cookie, reporting URL = http://192.168.1.24:8530/ReportingWebService/ReportingWebService.asmx
2015-03-04 23:39:15:796 1184 ae8 Report Reporter successfully uploaded 2 events.
2015-03-05 03:00:09:814 1184 e88 AU Forced install timer expired for scheduled install
2015-03-05 03:00:09:814 1184 e88 AU UpdateDownloadProperties: 0 download(s) are still in progress.
2015-03-05 03:00:09:829 1184 e88 AU Setting AU scheduled install time to 2015-03-06 08:00:00
2015-03-05 03:00:09:829 1184 e88 AU Successfully wrote event for AU health state:0
2015-03-05 03:00:14:837 1184 2680 Report CWERReporter finishing event handling. (00000000)
2015-03-05 04:22:52:598 1184 e88 AU #############
2015-03-05 04:22:52:598 1184 e88 AU ## START ## AU: Search for updates
2015-03-05 04:22:52:598 1184 e88 AU #########
2015-03-05 04:22:52:676 1184 e88 AU <<## SUBMITTED ## AU: Search for updates [CallId = {F615A07F-8986-4EB3-9D45-319F2AE1499A}]
2015-03-05 04:22:52:676 1184 1864 Agent *************
2015-03-05 04:22:52:676 1184 1864 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-03-05 04:22:52:691 1184 1864 Agent *********
2015-03-05 04:22:52:691 1184 1864 Agent * Online = Yes; Ignore download priority = No
2015-03-05 04:22:52:691 1184 1864 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-03-05 04:22:52:691 1184 1864 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-03-05 04:22:52:691 1184 1864 Agent * Search Scope = {Machine}
2015-03-05 04:22:53:206 1184 1864 Setup Checking for agent SelfUpdate
2015-03-05 04:22:53:237 1184 1864 Setup Client version: Core: 7.6.7600.320 Aux: 7.6.7600.320
2015-03-05 04:22:55:952 1184 1864 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2015-03-05 04:22:56:092 1184 1864 Misc Microsoft signed: NA
2015-03-05 04:22:56:123 1184 1864 Misc WARNING: Cab does not contain correct inner CAB file.
2015-03-05 04:22:56:123 1184 1864 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2015-03-05 04:22:56:139 1184 1864 Misc Microsoft signed: NA
2015-03-05 04:22:56:170 1184 1864 Setup Wuident for the managed service is valid but not quorum-signed. Skipping selfupdate.
2015-03-05 04:22:56:186 1184 1864 Setup Skipping SelfUpdate check based on the /SKIP directive in wuident
2015-03-05 04:22:56:186 1184 1864 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2015-03-05 04:23:22:269 1184 1864 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2015-03-05 04:23:22:269 1184 1864 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://192.168.1.24:8530/ClientWebService/client.asmx
2015-03-05 04:23:22:909 1184 1864 PT WARNING: Cached cookie has expired or new PID is available
2015-03-05 04:23:22:940 1184 1864 PT Initializing simple targeting cookie, clientId = b4d326e5-c396-4ee2-b2c4-c7cd25795a63, target group = , DNS name = arm-pal-ws10.leopold.int
2015-03-05 04:23:22:940 1184 1864 PT Server URL = http://192.168.1.24:8530/SimpleAuthWebService/SimpleAuth.asmx
2015-03-05 04:23:34:702 1184 1864 Handler Using CBS interface ICbsSession72015-03-05 19:36:45:323 1184 2390
Handler Using CBS interface ICbsSession7
2015-03-05 19:36:45:432 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:45:744 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:45:869 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:45:978 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:46:087 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:46:181 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:46:306 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:46:399 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:46:680 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:46:789 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:46:883 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:47:086 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:47:179 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:49:020 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:49:207 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:49:301 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:49:410 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:49:504 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:49:597 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:49:722 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:49:862 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:49:956 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:50:065 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:50:159 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:50:299 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:50:393 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:50:518 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:50:611 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:50:705 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:50:814 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:50:908 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:51:017 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:51:142 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:51:251 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:51:360 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:51:454 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:51:547 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:51:844 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:51:953 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:52:062 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:52:156 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:52:249 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:52:358 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:52:530 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:52:624 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:52:717 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:52:842 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:52:951 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:53:060 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:53:170 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:53:263 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:53:372 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:53:497 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:53:606 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:53:700 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:53:794 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:53:934 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:54:028 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:54:121 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:54:230 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:54:340 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:54:433 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:54:527 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:54:714 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:54:901 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:54:995 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:55:088 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:55:182 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:55:322 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:55:416 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:55:510 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:55:603 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:55:697 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:55:790 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:55:884 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:55:978 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:56:336 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:56:446 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:56:539 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:56:648 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:56:836 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:57:007 1184 2390 Handler Using CBS interface ICbsSession7
2015-03-05 19:36:58:349 1184 2390 Agent * Found 0 updates and 77 categories in search; evaluated appl. rules of 1448 out of 2726 deployed entities
2015-03-05 19:36:58:489 1184 2390 Agent *********
2015-03-05 19:36:58:489 1184 2390 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-03-05 19:36:58:489 1184 2390 Agent *************
2015-03-05 19:36:58:552 1184 1540 AU >>## RESUMED ## AU: Search for updates [CallId = {60067F42-15BA-49A9-BB09-5DE40DC141E4}]
2015-03-05 19:36:58:552 1184 1540 AU # 0 updates detected
2015-03-05 19:36:58:552 1184 1540 AU #########
2015-03-05 19:36:58:552 1184 1540 AU ## END ## AU: Search for updates [CallId = {60067F42-15BA-49A9-BB09-5DE40DC141E4}]
2015-03-05 19:36:58:552 1184 1540 AU #############
2015-03-05 19:36:58:567 1184 1540 AU Successfully wrote event for AU health state:0
2015-03-05 19:36:58:567 1184 1540 AU Featured notifications is disabled.
2015-03-05 19:36:58:567 1184 1540 AU AU setting next detection timeout to 2015-03-06 05:37:36
2015-03-05 19:36:58:567 1184 1540 AU Setting AU scheduled install time to 2015-03-06 08:00:00
2015-03-05 19:36:58:567 1184 1540 AU Successfully wrote event for AU health state:0
2015-03-05 19:36:58:583 1184 1540 AU Successfully wrote event for AU health state:0
2015-03-05 19:37:03:559 1184 2390 Report REPORT EVENT: {A94CF35E-0BD0-4E1F-9BF4-8263ED8ACAC8} 2015-03-05 19:36:58:474-0500 1
147 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Software Synchronization Windows
Update Client successfully detected 0 updates.
2015-03-05 19:37:03:559 1184 2390 Report REPORT EVENT: {B4FB174B-F3C9-4269-A9C7-180C1B25AEAC} 2015-03-05 19:36:58:489-0500 1
156 101 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Pre-Deployment Check Reporting
client status.
2015-03-05 19:37:03:559 1184 2390 Report CWERReporter finishing event handling. (00000000)
2015-03-05 19:48:50:738 1184 2390 Report Uploading 2 events using cached cookie, reporting URL = http://192.168.1.24:8530/ReportingWebService/ReportingWebService.asmx
2015-03-05 19:48:50:801 1184 2390 Report Reporter successfully uploaded 2 events.Hi,
Please make sure that the update files have been downloaded on the WSUS server.
Update will be available only if it has been downloaded.
Also, please check if the Network Service has the Full Control permission on the WSUS content folder.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Todays update! After todays update I can no longer send Safari or Spotify to the task bar without it cutting out (dropping audio in and out). Streams normally if I keep the window open on my desktop. This needs to be fixed immediately.
Nevermind. I figured it out.
-
I have reset my password with my computer and I am in the process of updating my iPhone and I am at the enter password window and cannot continue.
The Password reset email sent----follow the directions in the email to reset your password is the message showing on my iPhone. I did not receive the email and reset my password using my computer. iPhone will not allow me to continue and is stuck in the above window. How do I enter my mew password on my iPhone?
-
HP Ceement not working and continuous failure to update windows
I had a troouble with the screen and had it replaced to LED, and after that, it came into my notice that whenever I startup my system, the dialog box showing HP Ceement not working pops up. Also, there are options with check online for troubleshooting, but it did not work out when I tried it.
The another thing related with the issue (my guess only) is that, the original windows 7 home basic installed on the system is failing to get updated. the updates are identified and downloading also occurs. But, while installing, it always shows installation failed. This also seems to match approximately with the date in which I changed the display. So, is there any connection between the service done, and these two issues? and is there any way for me to rectify this?
I also should inform you guys, there is absolutely no other issue with the pc.
Thanks in advance,
DileepHello @Dileep008,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that HP CEEment is not working and continuously fails to update Windows on your notebook computer, and I would be happy to assist you in this matter!
To rectify this situation, I recommend performing a backup and recovery of your operating system. This can be done by following the steps in this document on Backing Up Your Files (Windows 7), as well as Performing an HP system recovery (Windows 7). This should help return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
SCCM/WSUS report on updates needed and what type of update
Hello all. I have been trying to get a report that will show the updates needed on a computer broken down by update type (security, critical, rollup, etc.). I am getting duplicate entries in the results, and don't know what I need to do to
filter out the results that don't apply to the computer in question. Here is what I have so far:
SELECT distinct sys.Netbios_Name0, catinfo.CategoryInstanceName, summ.QNumbers, summ.ID, summ.Title, ps.LastStatusTime, os.LastBootUpTime0
FROM v_UpdateComplianceStatus css
JOIN v_R_System sys ON css.ResourceID = sys.ResourceID
JOIN v_GS_PatchStatusEx ps ON sys.ResourceID=ps.ResourceId
JOIN v_GS_OPERATING_SYSTEM os ON os.ResourceID=sys.ResourceId
JOIN v_ApplicableUpdatesSummaryEx summ ON ps.UpdateID=summ.UpdateID
JOIN v_CICategories_All catall ON catall.CI_ID = css.CI_ID AND css.Status = 2
JOIN v_CategoryInfo catinfo ON catinfo.CategoryInstance_UniqueID = catall.CategoryInstance_UniqueID
AND ((catinfo.CategoryInstanceID = 26) OR (catinfo.CategoryInstanceID = 30) OR (catinfo.CategoryInstanceID = 33) OR (catinfo.CategoryInstanceID = 34))
WHERE sys.Netbios_Name0 = 'MachineName'
AND (ps.LastStateName <> 'Install Verified' AND ps.LastStateName <> 'Preliminary Success')
AND summ.Title NOT LIKE '%(LEGACY)%'
ORDER BY sys.Netbios_Name0, summ.ID
This gives me the updates in question that are needed, but produces mulitple rows for the same update. I'm probably missing something simple, but I'd appreciate any input. Thanks! ChipYes, I know this is an old post, I’m trying to clean them up.
I have run this query and it does not produce duplicates rows. It does however show that some SU have multiple classifications, hence why you are see it a few times.
http://www.enhansoft.com/
Maybe you are looking for
-
Daily Stock Report for a trading industry
Hi, I want a daily stock report for a trading industry. In this i want date wise opening stock, closing stock, outward quantity and inward quantity. How to get it? Thanks, Niranjan
-
Looking for a weather alarm app
Hi all. I am looking for a voice alarm app that tells me what the weather is currently and what the forecast is for the day when the alarm time comes around. The closest I have found is "morning report" but it does not give the forecast.
-
Defaulting tax code at the time of PO creation
Hi Friends How do i default tax code in a PO for a combination of COCD pur. org. PO doc. type when ever COCD == X & Pur. org -== Y P.o Doc type == NB then i should have Tax code == Z in the invoice tab of PO item details. if some thing other than Z
-
CrystalActiveXReportViewer inconsistent doesn't display text
Hi I have designed report using CrystalActiveXReportViewer in VBA. This report display data in "Cross Tab" format. Currently for one user this report doesn't display column header and row header in Cross Tab, but display all other data in cross tab
-
How to stop BDB from Mapping Database Files?
We have a problem where the physical memory on Windows (NT Kernel 6 and up, i.e. Windows 7, 2008R2, etc.) gets maxed out after some time when running our application. On an 8GB machine, if you look at our process loading BDB, its only around 1GB. Bu