Windows 7 126 error after itunes install, why?

ITunes runs well, however I get a windows 7 126 error. I don't know how to repair it. I've unintalled all the Apple files and reinstalled several times to no avail. please help and thanks in advance!

I found my solution. As some suggested here, I looked and found an older iTunes x86 file that needed to be deleted. Once done, my current iTunes works fine and no longer trips the windows 7 126 error alert.

Similar Messages

Windows 126 error 7

I am not sure which discussion I saw the solution to the itunes error message Windows 126 Error - but they suggested removing ALL Apple items from PC, which I did, then installed Itunes...it worked. I had spent a couple of hours before trying all sorts of things.

Hello grandmom.026,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
1. Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order. Then, restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components, may have unintended affects.If you encounter an error while uninstalling, try repairing the affected component:
2. Verify iTunes and related components are completely uninstalledIn most cases, removing iTunes and its related components from the Control Panel will remove all supporting files belonging to those programs. To fully resolve these issues, manually remove any remaining iTunes-related folders listed below.On 32-bit and 64-bit systems:On 64-bit systems:
3. Reboot your computer.
4. Download the iTunes installer. When prompted to select what you want to do, choose to save it to your computer.
5. Install iTunes.
Right click on iTunesSetup or iTunes64Setup.
Windows Vista, Windows 7, and Windows 8: Select the 'Run as administrator' option.
Windows XP: Select the Open option.
Finish installing iTunes.
It is important to uninstall iTunes and the related components in the order listed in the first step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M.

How do I retrieve contacts in windows.old folder after I installed a new version of windows?

how do I retrieve contacts in windows.old folder after I installed a new version of windows?

Skydiver119 wrote:
My situation may be different from yours since all mu music is ripped from cd's not bought from iTunes, but I would think the premise is the same.
Doesn't matter what is in your library.
When I moved computers I literally dragged and dropped the music where I wanted it to be. THen when I opened iTunes I imported the files back into iTUnes
This creates a new library with all the same items but you lose a lot of info: Ratings, comments, date added, custom EQ, playlists, etc.
If you simply copy the entire /Music/iTunes/ folder, it is the exact same library, not a new library. No info is lost.

I keep getting a msvcr80.dll error after iTunes update failed?

I keep getting a msvcr80.dll error after iTunes update failed?

Seems the base of the problem is the update installation does not change the libraries but the software wants to see them changed. So the user has to go clear out all software that shares the libraries and then install the full version so they are rebuilt properly.

HOW TO SOLVE THE R6034 ERROR IN ITUNES INSTALATION

I need toknow how to solve the R6034 error in itunes instalation becouse y can´t buk up muy phone

How to solve this ?
#import <UIKit/UIKit.h>
int main(int argc, char *argv[]) {
    NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init];
   -> int retVal = UIApplicationMain(argc, argv, nil, nil);
    [pool release];
    return retVal;

Netflix plug in error after lion install

What is the fix for Netflix plug in error after lion install?

I reinstalled the plugin from a Netflix email, still get this problem:
I don't have private browsing on, by the way.

Windows 8 Audio has locked up after itunes install?!

Anyone got a clue how to restore sound operations on a windows 8 system after an itunes install.
I uninstalled all apple products, but the audio is still broken. Automated problem resolution didn't work.
My last option is to do a restore, but that's kind of ugly. Any other suggestions?
Anybody reported iTunes 11 to DHS as a virus yet?
Thanks
m

To whom it may concern:
Be forewarned ... Execute a system checkpoint for restore prior to executing iTunes 11(64) installation on Windows 8 platforms. Be prepared to execute a restore after installation given it appears that iTunes 11 will change basic settings on systems with multiple advamced audio systems (hdmi + analog) resulting in configurations that point parts of the audio stream at disconnected hardware/software streams.
These errors will result in all audio playback system "freezing", or failing to load and sequence audio files properly. Quick resolution is to restore the system from checkpoint and removing all traces of the iTunes package.
Man i really miss Steve!
Love my iPad, love my iPod, hate iTunes with a passion!
m

Windows Installer error message when installing or removing iTunes

When I try to either upgrade, install, or remove iTunes, I get this message:
"The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance."
Anyone know how I can fix this?

Microsoft have this help article on this error message;
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q315346#kb1

Please Help Me, Windows Form Error After Install

help me to fixed this errors after install visual basic
Instances of this error (1)
1.
Hide Call Stack
at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkUniverse..ctor(IDesignTimeAssemblyLoader assemblyLoader, IVsDesignTimeAssemblyResolution projectAssemblyResolution, IVsSmartOpenScope dispenser)
at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkUniverse.GetUniverse(IDesignTimeAssemblyLoader assemblyLoader, IVsDesignTimeAssemblyResolution projectAssemblyResolution, IVsSmartOpenScope dispenser)
at Microsoft.VisualStudio.Shell.Design.VsTargetFrameworkProvider..ctor(IVsDesignTimeAssemblyResolution assemblyResolution, IDesignTimeAssemblyLoader assemblyLoader, TypeDescriptionProvider parentProvider, IVsSmartOpenScope openScope)
at Microsoft.VisualStudio.Design.VsTargetFrameworkProviderService.get_TargetFrameworkProvider()
at Microsoft.VisualStudio.Design.VsTargetFrameworkProviderService.GetProvider(Type type)
at System.ComponentModel.Design.Serialization.DesignerSerializationManager.GetType(String typeName)
at System.ComponentModel.Design.Serialization.DesignerSerializationManager.System.ComponentModel.Design.Serialization.IDesignerSerializationManager.GetType(String typeName)
at System.ComponentModel.Design.Serialization.TypeCodeDomSerializer.Deserialize(IDesignerSerializationManager manager, CodeTypeDeclaration declaration)
at System.ComponentModel.Design.Serialization.CodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager manager)
at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomDesignerLoader.PerformLoad(IDesignerSerializationManager serializationManager)
at Microsoft.VisualStudio.Design.Serialization.CodeDom.VSCodeDomDesignerLoader.DeferredLoadHandler.Microsoft.VisualStudio.TextManager.Interop.IVsTextBufferDataEvents.OnLoadCompleted(Int32 fReload)

Hello,
I am afraid that I could not get any error message form that list you shared, is there any other message about that error?
To narrow down this issue, I would recommend you check the following suggestions.
1. Rebuild your project and debut it to see whether it could work.
2. If #1 works fine, then publish it and install that application to check whether there is any issue while installing.
3. If #2 works too, then you could share the screenshot and the detailed error message with us.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Socket/JVM_Bind Errors after fresh install

I am trying to install Weblogic on a Development box on a fresh, additional Oracle Home. When running a clean Weblogic install and configuring a standard starter domain, I am unable to hit the console from my browser and I have no idea why. I configured the domain to use 7002 instead of the standard 7001 port so it would not conflict with the original Oracle Home's Weblogic install (although we will never have them both running simaltaneously - I just did it to be safe). I've tried using http://<IP ADDRESS>:7002/console, http://localhost:7002/console, and http://<DOMAIN NAME>:7002/console with no luck. It does not hang at all and just brings me to a "cannot display the page" message. I'm seeing JVM_Bind errors (server address already in use), although I know it is not in use. Here is the output I get when I start up Weblogic:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\V-Tsmith>G:\Oracle\Middleware\user_projects\domains\base_domain\bin
'G:\Oracle\Middleware\user_projects\domains\base_domain\bin' is not recognized a
s an internal or external command,
operable program or batch file.
C:\Users\V-Tsmith>G:\Oracle\Middleware\user_projects\domains\base_domain\bin\sta
rtWebLogic.cmd
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=
48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=G:\Oracle\Middleware\patch_wls1036\profiles\default\sys_manifest_class
path\weblogic_patch.jar;G:\Oracle\Middleware\patch_ocp371\profiles\default\sys_m
anifest_classpath\weblogic_patch.jar;G:\Oracle\Middleware\jdk160_29\lib\tools.ja
r;G:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic_sp.jar;G:\Oracle\Middle
ware\wlserver_10.3\server\lib\weblogic.jar;G:\Oracle\Middleware\modules\features
\weblogic.server.modules_10.3.6.0.jar;G:\Oracle\Middleware\wlserver_10.3\server\
lib\webservices.jar;G:\Oracle\Middleware\modules\org.apache.ant_1.7.1/lib/ant-al
l.jar;G:\Oracle\Middleware\modules\net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contr
ib.jar;G:\Oracle\Middleware\wlserver_10.3\common\derby\lib\derbyclient.jar;G:\Or
acle\Middleware\wlserver_10.3\server\lib\xqrl.jar
PATH=G:\Oracle\Middleware\patch_wls1036\profiles\default\native;G:\Oracle\Middle
ware\patch_ocp371\profiles\default\native;G:\Oracle\Middleware\wlserver_10.3\ser
ver\native\win\32;G:\Oracle\Middleware\wlserver_10.3\server\bin;G:\Oracle\Middle
ware\modules\org.apache.ant_1.7.1\bin;G:\Oracle\Middleware\jdk160_29\jre\bin;G:\
Oracle\Middleware\jdk160_29\bin;C:\Program Files\CA\SC\CAWIN\;C:\xPression\Drive
rs;E:\Program Files\Legato\nsr\bin;C:\Program Files\HP\NCU;C:\Windows\system32;C
:\Windows;C:\Windows\System32\Wbem;C:\PROGRA~1\CA\SC\CAM\bin;C:\Program Files\CA
\SC\Csam\SockAdapter\bin;C:\Program Files\CA\DSM\bin;C:\Program Files\CA\SC\CBB\
;G:\Oracle\Middleware\wlserver_10.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode)
Starting WLS with line:
G:\Oracle\Middleware\jdk160_29\bin\java -client -Xms256m -Xmx512m -XX:CompileT
hreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Dweblogic.Name=AdminServer
-Djava.security.policy=G:\Oracle\Middleware\wlserver_10.3\server\lib\weblogic.p
olicy -Xverify:none -da -Dplatform.home=G:\Oracle\Middleware\wlserver_10.3 -Dw
ls.home=G:\Oracle\Middleware\wlserver_10.3\server -Dweblogic.home=G:\Oracle\Midd
leware\wlserver_10.3\server -Dweblogic.management.discover=true -Dwlw.iterati
veDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=G:\Oracl
e\Middleware\patch_wls1036\profiles\default\sysext_manifest_classpath;G:\Oracle\
Middleware\patch_ocp371\profiles\default\sysext_manifest_classpath weblogic.Ser
ver
<Oct 17, 2012 11:07:34 AM EDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ
JCE Provider self-integrity check for better startup performance. To enable thi
s check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Oct 17, 2012 11:07:34 AM EDT> <Info> <Security> <BEA-090906> <Changing the defa
ult Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disabl
e this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Oct 17, 2012 11:07:35 AM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting We
bLogic Server with Java HotSpot(TM) Client VM Version 20.4-b02 from Sun Microsys
tems Inc.>
<Oct 17, 2012 11:07:35 AM EDT> <Info> <Management> <BEA-141107> <Version: WebLog
ic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Oct 17, 2012 11:07:36 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server st
ate changed to STARTING>
<Oct 17, 2012 11:07:36 AM EDT> <Info> <WorkManager> <BEA-002900> <Initializing s
elf-tuning thread pool>
<Oct 17, 2012 11:07:36 AM EDT> <Notice> <LoggingService> <BEA-320400> <The log f
ile G:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminServer\l
ogs\AdminServer.log will be rotated. Reopen the log file if tailing has stopped.
This can happen on some platforms like Windows.>
<Oct 17, 2012 11:07:36 AM EDT> <Notice> <LoggingService> <BEA-320401> <The log f
ile has been rotated to G:\Oracle\Middleware\user_projects\domains\base_domain\s
ervers\AdminServer\logs\AdminServer.log00002. Log messages will continue to be l
ogged in G:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminSer
ver\logs\AdminServer.log.>
<Oct 17, 2012 11:07:36 AM EDT> <Notice> <Log Management> <BEA-170019> <The serve
r log file G:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminS
erver\logs\AdminServer.log is opened. All server side log events will be written
to this file.>
<Oct 17, 2012 11:07:37 AM EDT> <Notice> <Security> <BEA-090082> <Security initia
lizing using security realm myrealm.>
<Oct 17, 2012 11:07:38 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server st
ate changed to STANDBY>
<Oct 17, 2012 11:07:38 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server st
ate changed to STARTING>
<Oct 17, 2012 11:07:38 AM EDT> <Notice> <LoggingService> <BEA-320400> <The log f
ile G:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminServer\l
ogs\base_domain.log will be rotated. Reopen the log file if tailing has stopped.
This can happen on some platforms like Windows.>
<Oct 17, 2012 11:07:38 AM EDT> <Notice> <LoggingService> <BEA-320401> <The log f
ile has been rotated to G:\Oracle\Middleware\user_projects\domains\base_domain\s
ervers\AdminServer\logs\base_domain.log00002. Log messages will continue to be l
ogged in G:\Oracle\Middleware\user_projects\domains\base_domain\servers\AdminSer
ver\logs\base_domain.log.>
<Oct 17, 2012 11:07:38 AM EDT> <Notice> <Log Management> <BEA-170027> <The Serve
r has established connection with the Domain level Diagnostic Service successful
ly.>
<Oct 17, 2012 11:07:38 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server st
ate changed to ADMIN>
<Oct 17, 2012 11:07:38 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server st
ate changed to RESUMING>
<Oct 17, 2012 11:07:38 AM EDT> <Error> <Server> <BEA-002606> <Unable to create a
server socket for listening on channel "Default". The address 10.32.125.34 migh
t be incorrect or another process is using port 7002: java.net.BindException: Ad
dress already in use: JVM_Bind.>
<Oct 17, 2012 11:07:38 AM EDT> <Error> <Server> <BEA-002606> <Unable to create a
server socket for listening on channel "Default[8]". The address 127.0.0.1 migh
t be incorrect or another process is using port 7002: java.net.BindException: Ad
dress already in use: JVM_Bind.>
<Oct 17, 2012 11:07:38 AM EDT> <Error> <Server> <BEA-002606> <Unable to create a
server socket for listening on channel "Default[9]". The address 0:0:0:0:0:0:0:
1 might be incorrect or another process is using port 7002: java.net.BindExcepti
on: Address already in use: JVM_Bind.>
<Oct 17, 2012 11:07:38 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default[
1]" is now listening on fe80:0:0:0:49ad:74ba:d80b:c53b:7002 for protocols iiop,
t3, ldap, snmp, http.>
<Oct 17, 2012 11:07:38 AM EDT> <Warning> <Server> <BEA-002611> <Hostname "NYOSEH
STSTPR01.private.private.com", maps to multiple IP addresses: 10.32.125.34,
fe80:0:0:0:51cf:60de:d2c5:c4dc%14>
<Oct 17, 2012 11:07:38 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default[
2]" is now listening on fe80:0:0:0:8d6:9a3f:dfac:6dcf:7002 for protocols iiop, t
3, ldap, snmp, http.>
<Oct 17, 2012 11:07:38 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default[
7]" is now listening on fe80:0:0:0:754d:df3f:468f:a1b6:7002 for protocols iiop,
t3, ldap, snmp, http.>
<Oct 17, 2012 11:07:38 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default[
6]" is now listening on fe80:0:0:0:c914:19c3:967c:20ba:7002 for protocols iiop,
t3, ldap, snmp, http.>
<Oct 17, 2012 11:07:38 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default[
3]" is now listening on fe80:0:0:0:9c14:2ea0:9c82:1f28:7002 for protocols iiop,
t3, ldap, snmp, http.>
<Oct 17, 2012 11:07:38 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default[
5]" is now listening on fe80:0:0:0:51cf:60de:d2c5:c4dc:7002 for protocols iiop,
t3, ldap, snmp, http.>
<Oct 17, 2012 11:07:38 AM EDT> <Notice> <Server> <BEA-002613> <Channel "Default[
4]" is now listening on fe80:0:0:0:0:5efe:a20:7d22:7002 for protocols iiop, t3,
ldap, snmp, http.>
<Oct 17, 2012 11:07:38 AM EDT> <Notice> <WebLogicServer> <BEA-000331> <Started W
ebLogic Admin Server "AdminServer" for domain "base_domain" running in Developme
nt Mode>
<Oct 17, 2012 11:07:38 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server st
ate changed to RUNNING>
<Oct 17, 2012 11:07:38 AM EDT> <Notice> <WebLogicServer> <BEA-000360> <Server st
arted in RUNNING mode>
When I first started it up after the install, I was having Socket Errors spit out after the "RUNNING" message (which for some reason isn't happening now):
<Oct 17, 2012 11:03:36 AM EDT> <Critical> <Server> <BEA-002616> <Failed to liste
n on channel "Default[4]" on fe80:0:0:0:0:5efe:a20:7d22:7002, failure count: 1,
failing for 0 seconds, java.net.SocketException: socket closed>
<Oct 17, 2012 11:03:37 AM EDT> <Critical> <Server> <BEA-002616> <Failed to liste
n on channel "Default[4]" on fe80:0:0:0:0:5efe:a20:7d22:7002, failure count: 2,
failing for 1 seconds, java.net.SocketException: socket closed>
<Oct 17, 2012 11:03:39 AM EDT> <Critical> <Server> <BEA-002616> <Failed to liste
n on channel "Default[4]" on fe80:0:0:0:0:5efe:a20:7d22:7002, failure count: 3,
failing for 3 seconds, java.net.SocketException: socket closed>
<Oct 17, 2012 11:03:42 AM EDT> <Critical> <Server> <BEA-002616> <Failed to liste
n on channel "Default[4]" on fe80:0:0:0:0:5efe:a20:7d22:7002, failure count: 4,
failing for 6 seconds, java.net.SocketException: socket closed>
<Oct 17, 2012 11:03:46 AM EDT> <Critical> <Server> <BEA-002616> <Failed to liste
n on channel "Default[4]" on fe80:0:0:0:0:5efe:a20:7d22:7002, failure count: 5,
failing for 10 seconds, java.net.SocketException: socket closed>
<Oct 17, 2012 11:03:51 AM EDT> <Critical> <Server> <BEA-002616> <Failed to liste
n on channel "Default[4]" on fe80:0:0:0:0:5efe:a20:7d22:7002, failure count: 6,
failing for 15 seconds, java.net.SocketException: socket closed>
<Oct 17, 2012 11:03:57 AM EDT> <Critical> <Server> <BEA-002616> <Failed to liste
n on channel "Default[4]" on fe80:0:0:0:0:5efe:a20:7d22:7002, failure count: 7,
failing for 21 seconds, java.net.SocketException: socket closed>
<Oct 17, 2012 11:04:04 AM EDT> <Critical> <Server> <BEA-002616> <Failed to liste
n on channel "Default[4]" on fe80:0:0:0:0:5efe:a20:7d22:7002, failure count: 8,
failing for 28 seconds, java.net.SocketException: socket closed>
<Oct 17, 2012 11:04:12 AM EDT> <Critical> <Server> <BEA-002616> <Failed to liste
n on channel "Default[4]" on fe80:0:0:0:0:5efe:a20:7d22:7002, failure count: 9,
failing for 36 seconds, java.net.SocketException: socket closed>
<Oct 17, 2012 11:04:21 AM EDT> <Critical> <Server> <BEA-002616> <Failed to liste
n on channel "Default[4]" on fe80:0:0:0:0:5efe:a20:7d22:7002, failure count: 10,
failing for 45 seconds, java.net.SocketException: socket closed>

Hi,
This clearly indicates that 7002 port is already used and it cannot bind with 7002 for now.
Try to change with 7002 to other port number like 7003 or any thing will solve your problem.
Regards,
Kal

I keep getting 'unknown error' after clicking 'install app' when trying to download Mavericks from the App store.

Trying to install Mavericks from the App store on my 2011 11" Macbook air, (wihch has more than 15GB free space). After clicking 'Install App', and entering the Apple ID password, I get 'unkonwn error'.

You can't use Safari to download iPad apps. Only use iTunes/App Store.
 Cheers, Tom

PC won't boot with CDRom Drives hooked up after iTunes install

Hello All,
After installing iTunes (initial, first time install on this machine) the computer would not fully boot. It would get to the Windows starting screen and the indicator bar would reach about 2/3 of the way complete and sit there. I tried rebooting in safe mode and it would still get stuck at seemingly the same point. After attempting several things to try and correct the issue, I finally stumbled upon that if I disconnect the CD drives the computer boots fine with iTunes installed. I've searched through the past records and saw some similar issues, but nothing quite the same and a lot of the fixes involved running diagnostics on the CD drives, but I can't do that currently as I have to have them disconnected to use the computer. Ideas? Help!
Thanks,
Jen
Self Built (ABIT KV8 PRO Motherboard, AMD Athlon Processor) Windows 2000 Professional

hi wickie!
nice blue screen after the start up.. then it keeps on restarting
what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
here's a reference on the sorts of things i'm asking about:
Troubleshooting Windows Stop Messages
love, b

Error message: iTunes Install

Hi guys, how are you?
I have an issue trying to install the iTunes program. Awhile ago I had iTunes installed by I was unable to successfully install the latest update so I figured I
would uninstall and re-install iTunes from scratch. When I try to install the program now I receive the follow message:
An error occured during the installtion of assembly
'Microsoft.VC80.CRT.type="win32",version=8.0.50727.
6195",publicKeyToken="1fc8b3b9a1e18e3b",processo
rArcitecture='x86"". Please refer to Help and Support
for more information. HRESULT:0x80070002
I am currently running the windows 7, 64 bit operating System. Can anyone help please??
Michael
Message was edited by: krazymjnt

hi Big Al!
just checking. have you worked through the general advice and the 1607-specific links on this document yet?
http://docs.info.apple.com/article.html?artnum=93976
keep us posted.
love, b

Plugin sandbox errors after yosemite install

After Yosemite install I see MANY errors in my system.log like this:
Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/AirDrop .appex: plug-ins must be sandboxed
Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/Faceboo kProfilePic.appex: plug-ins must be sandboxed
Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/FlickrI mage.appex: plug-ins must be sandboxed
Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/LinkedI n.appex: plug-ins must be sandboxed
Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/ShareMa il.appex: plug-ins must be sandboxed
Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/ShareMe ssages.appex: plug-ins must be sandboxed
Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/SinaWei bo.appex: plug-ins must be sandboxed
Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/SystemA ddToiPhoto.appex: plug-ins must be sandboxed
Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/SystemS etAccountPicture.appex: plug-ins must be sandboxed
Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/SystemS etDesktopImage.appex: plug-ins must be sandboxed
Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/Tudou.a ppex: plug-ins must be sandboxed
Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/Twitter ProfilePic.appex: plug-ins must be sandboxed
Oct 20 11:04:35 Yumi.local pkd[366]: ignoring mis-configured plug-in at /System/Library/PrivateFrameworks/ShareKit.framework/Versions/A/PlugIns/Youku.a ppex: plug-ins must be sandboxed
It goes for many software, like ShareKit.framework, SceneKit.framework, NotificationCenter.framework, Preview.app, Calendar.app, Reminders.app etc. - all of them are Apple software. I get it like every 1 minute in log.
Google didn't help. What is it, what does it means and how to fix?..

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ -exec ls -Odel {} \; | wc -l
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "85." Please post it in a reply.

Adobe Download Assistant gives error after finishing downloading, why?

I have downloaded the trial version of CS5.5 Master Collection twice. But when the download is completed Adobe Download Assistant gives Error and cannot install the software. I go check in the download folder and there's nothing there. My laptop haas ample available storage space (478 GB), running Windows 7 Home Edition, 64-bit.
I tried with smaller file (Photoshop CS5.1 Trial), same story.
Can someone please give me direct download links for following trial softwares:
1. Photoshop CS5.1 Trial
2. CS5.5 Master Collection
Thanks
Malila

This site shows how you can do a direct download: http://prodesigntools.com/tag/ddl
Note that you have to follow their instructions carefully and exactly.
By the way, the word "software" is not pluralized by adding an 's' on the end. Thus "softwares" is incorrect usage. Just say "software" or "software packages" instead.
-Noel

Windows 7 126 error after itunes install, why?

Similar Messages

Maybe you are looking for