Windows 7 32-bit and Tx

I had read quite a lot of posts here and I found that most of the questions asked in here were about 64-bit windows.Only very few were about 32-bit windows 7.
I have a Tx and I had upgraded my OS to windows 7 32-bit a few days ago.
The messages here are a lot and they are a bit confusing to me.
My conclusion is that I can HotSync my Tx with my 32-bit Windows 7 via the USB cable,and I don't have to get a bluebooth dongle in order to do the HotSync,
am I right?
Thanks for your reply.

That's correct. You should download PD 6.2.2 from the support web site.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Similar Messages

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work.

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.

Check out this thread:
https://discussions.apple.com/thread/3677426?start=0&tstart=0

DAC 10.1.3.4.1 Server on Windows (64 bit) and Linux x86 (64 bit)?

Hi Friends,
Please confirm wheteher Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 Server is supported on
Windows (64 bit) and Linux x86 (64 bit)
Because from edelivery.oracle.com i could see the downloads only for windows and Linux and not specified as 32/64 - bit
so will it mean that the same dump is used for both 32 and 64 bit
1) Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 for Microsoft Windows (V16377-01)
can the above dump is used for both 32 and 64 bit windows?
2) Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 for Linux x86 (V16378-01)
can the above dump is used for both 32 and 64 bit Linux?
The reason is because for OBIA 7.9.6.3 configuration both the Informatica Power Centre and DAC Server should co-exist
and i could see seperate installer for 32 and 64 bit for both Windows and Linux whereas i couldn't see it for DAC Server
Please confirm .
Regards,
DB

It is supported on both platforms. With Linux however, if you have any issues you can to install in a windows environment, then copy over the folder structure. Also, you can possibly run into issues running the setup.exe on 64bit windows. When you open the install directory, go to dac/disk1/install and run the executable for win32. win64bit can return an error where it says it cannot create certain temp directories. It is a known java bug you can find in the support website.
Edited by: user12838563 on Jul 13, 2011 11:35 PM

Is iTunes 10.5 beta available for windows 32 bit and where is it found?

New to the developers site. Can someone tell me if iTunes 10.5 beta is available for Windows (32 Bit) and where it can be found for download? Thanks.

You're out in the public forums here, bryan. Best not to ask questions like that here ... it's a breach of your NDA. Try the developer forums instead?
http://developer.apple.com/devforums/

PI 7.0/7.1 Installation on Windows 64-bit and MaxDB

Hi Folks,
We have an installed PI in one server on Windows 2003 using Oracle DB (licensed).
We wish to install PI in another server on Windows 2003 64-bit but this time it will be MaxDB.
I've tried searching and found SAP NetWeaver Process Integration 7.1 on Windows_Oracle.pdf.
Any advise please on how to go about installing PI 7.0/7.1 on Windows 64-bit:MaxDB. Thank you!
Regards,
Lex

Hi Lex,
you cannot use the SAP DB (=old name of SAP MaxDB) package you found on the old SAP DB site for your PI installation for various reasons:
a) SAP DB version 7.4 is VERY old, it is no longer supported since the end of 2006 !
b) typically, a SAP application and its DBMS are installed using SAPinst
Try checking the SAP Software Distribution Center (incl. PAM: Product Availability Matrix) on the SAP Support Portal. You can also get the correct software there (when you're an official SAP customer).
Regards,
Roland

Installed windows 32 bit and 64 on same computer

windows 7 premium and 7 2010 pro plus / 32/64 bit activated installed on same Comp.
This question was solved.
View Solution.

Hi,
You must uninstall 32 bit version before you can install 64 bit version. Your machine MUST run 64 bit Operating system. Please also consider this:
http://answers.microsoft.com/en-us/office/forum/office_2010-office_install/need-to-uninstall-ms-offi...
and this:
http://technet.microsoft.com/en-us/library/ee681792.aspx
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Windows 32 bit and solaris 64 bit

i am configuring a rman repository database in win2k server(oracle 9i 32 bit).The target
database is on solaris 9(64 bit).Wheter is there any conflict or problems between these 32
bit(rman repository) and 64 bit(Target database).
with regards
ramya

Don't worry about this. The repository database holds only metadata about the target database, but no real data (from the target) itself.

Unable to download oracle 10g release 2 for windows 32 bit and linux

unable to download the oracle 10g for windows and linux from the website given below. http://www.oracle.com/technology/software/products/database/oracle10g/index.html
can any one help me out ?

From that site, you need to click on a link and answer the questions on the next page. Click 'I agree' and, on the following page, you select the download you need.
If that doesn;t work, you may need to review user settings, security, and knowledge base for your browser.

Odd incompatibility between 10g2 for windows 32-bit and Linux 64-bit

Hi.
When we run the following SQL under windows, it works as expected.
drop table TRANS;
drop table TRANS_PAT_LEVEL;
drop table TRANS_DAY_LEVEL;
create table TEST1.TRANS (ID NUMBER(22), QTYDISPENSED NUMBER(22), TRANSACTIONDATEDIFF NUMBER(22),FMYPRODUCT NUMBER(22));
create table TEST1.TRANS_PAT_LEVEL (ID NUMBER(22), FMYPRODUCT NUMBER(22), LASTMYPRODUCTUSE NUMBER(22),ELIGIBLERET NUMBER(22));
create table TEST1.TRANS_DAY_LEVEL (DAYID NUMBER(22) not null, UNITS NUMBER(22));
UPDATE TRANS_DAY_LEVEL SET UNITS =((SELECT SUM(QTYDISPENSED) FROM (SELECT T.QTYDISPENSED, T.TRANSACTIONDATEDIFF DIFF FROM TRANS T, TRANS_PAT_LEVEL TPL WHERE T.FMYPRODUCT=1 AND T.ID = TPL.ID AND TPL.ELIGIBLERET = 1 AND LASTMYPRODUCTUSE>=DAYID ) WHERE DIFF = TRANS_DAY_LEVEL.DAYID)) WHERE DAYID>=0 AND DAYID<=365;
But when we run it under Linux (Redhat 4.3 x86_64) , we see the following error with the last command:
SQL> UPDATE TRANS_DAY_LEVEL SET UNITS =((SELECT SUM(QTYDISPENSED) FROM (SELECT T.QTYDISPENSED, T.TRANSACTIONDATEDIFF DIFF FROM TRANS T, TRANS_PAT_LEVEL TPL WHERE T.FMYPRODUCT=1 AND T.ID = TPL.ID AND TPL.ELIGIBLERET = 1 AND LASTMYPRODUCTUSE>=DAYID ) WHERE DIFF = TRANS_DAY_LEVEL.DAYID)) WHERE DAYID>=0 AND DAYID<=365
ERROR at line 1:
ORA-00904: "DAYID": invalid identifier
We have also seen an incompatibility regarding case sensitive column names being created by the JDBC under linux, where under windows the same tables all have case-insensitive column names.
Any help here?

Hi,
exception is expected behavior since inline views [can not be correlated|http://forums.oracle.com/forums/thread.jspa?messageID=3403285&#3403285] in Oracle (yet). Successful execution of such query means a bug in that Oracle release.

Oracle 11.2.0.4 clinet on Windows 32 bit and Windos 64 bit

I see on technet.oracle.com Oracle 11.2.0.1 clinest avaiable. How do I update to Oracle 11.2.0.4.
Is there a patchset to upgrade to Oracle 11.2.0.4 (is patch same for client and server).
Apprecaite any insight

Patches are available on My Oracle Support - access to which requires a paid support contract
See MOS Doc 1562139.1 - check the README of the patch

Windows 7 64-bit and 4gb ram on S10-3T

Can I upgrade my S10-3T to Windows 64-bit and install a 4gb stick of ram? I found a couple of sticks with matching specs on amazon.
Also will the processor bottleneck the 4gb ram/ is it even worth it?
I have the N470 BTW

It means windows 7 64 bit won't work with S10-3T, same with the 4G RAM since its maximum is only 2GB

Windows 7 Enterprise 32 bit and Windows Server 2012 64 bit successful dual boot.

Client Windows 7 Enterprise 32 bit SP1, Windows Server 2012 64 bit successfully install for dual boot. Even deleted Windows 7 Enterprise from msconfig, moved Windows Server 2012 partition, for dual boot installed Windows 8.1 64 bit (now posting from),
deleted Windows Server 2012 from msconfig, moved Windows 8.1 partition, just for knowledge.

Hi,
After referring to your post, I can understand you are trying to install 32 bit and 64 bit OS on same system. Are you trying to perform that? Here providing you thread link for detail.
dual boot windows 32 bit and 64 bit at same pc
Hope it helps to understand!
Regards.

SAPBobsCOM.dll and windows 64 bits

When i try to connect to sap using di api, i have a exception:
Retrieving the COM class factory for component with CLSID {632F4591-AA62-4219-8FB6-22BCF5F62007} failed due to the following error: 80040154
I have a web service on windows 64 bits and I have reinstalled di api

Hello
When you compile your application, you must use x86 type as target CPU. reason: B1 and SDK components are running in 32 bit mode under x64 machines. x64 application cannot communicate x86 applications in .COM components. Your addon is compiled to x64, and the DI API is x86 compiled.
This is the reason why you receice error message,
Also nice, if you give the directirve Win32 = True to the compiler when you build you appliaction.
Regards
János

Error numbers are 2502 and 2503 for installing iTunes for Windows 64 bits. How to fix?

Hey guys,
I cannot install iTunes (latest vision) on my new laptop (Windows 64 bits), and it says that the error numbers are 2502 and 2503...
Can someone tell me how to fix this?
Thank you!

Check your system date & time is correct.
Run the System File Checker: http://support.microsoft.com/kb/929833
If you still have problems try a creating a new user account with administrator rights, log into it, and attempt the install from there.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Weblogic Portal 10.3.2 for Windows 64 bit with OEPE

Our environment is Windows 64 bit and we are upgrading from Weblogic Portal 9.2 to 10.3.2.
I have installed Weblogic Portal for 64 bit using generic installer and have also installed OEPE Helios for 64 bit.
I am not getting Portal perspective in Eclipse?

These issues are why we dropped every Oracle products for our new projects. We only kept Oracle SGBD.
Working with Oracle products costs a lot, impose specific tools, impose specific environment (can't work with Windows 7/x64), doesn't integrate in standard toolchains (eclipse, maven, continuous integration, ...). More, you don't have any control on product evolutions and maintenance.
With this decision we saved a lot of money, a lot of time, quality, and community support is far more powerful than buyers think. Nothing is better than standards!
Sorry Oracle but I think you need to seriously rethink your commercial behavior and your relationship with J2EE developers.

HTTP Server for Windows 64 bit not on the companion CD

Hi,
I cannot find the HTTP Server for Windows 64 bit on the companion CD. Any idea where I can get it from? For the 32bit version the HTTP Server is on the Companion CD.
Thanks in advance,
Florin

If i am correct reason should be : Oracle Application Server 10g will run as a 32-bit application
Following platforms have the same media in either case:
Microsoft Windows 32-bit and EM64T/AMD64
(Not Itanium-64, which is separate and referred to as "Windows 64-bit")
Linux x86 and Linux x86-64
Solaris Sparc 32-bit and Solaris Sparc 64-bit
As the Oracle Application Server 10g will be run as a 32-bit application. See the Installation Guide or readme files for any specific steps on these 64-bit platforms.
Refer the Note.433061.1 - How to Obtain Application Server 10g Media, Patchsets, and Patches

Windows 7 32-bit and Tx

Similar Messages

Maybe you are looking for