Windows 7 32-bit or 64-bit for CS5?

I'm planning to buy a new PC with Windows 7 (my current PC is 4 yrs old, Win XP, slowing to a crawl). I will be running CS4 Design Premium on it at first, and later upgrade to CS5. Would it be advantageous to get a 64-bit system w/ 64-bit Windows 7, or is 32-bit just as good? Right now I'm planning on a quad-core processor and probably 4 GB of RAM (or would 2 or 3 GB be just as good?) I typically run Firefox and 1-3 CS apps simultaneously, sometimes also with Outlook. I appreciate any recommendations.

What about CS5 Web Premium? I'm interested in this product, but our developers are all running WinXP SP3 32-bit. Will CS5 Web Premium install
on 32-bit OS? I noticed the requirements state 64-bit processor, which we all have. But the requirements does not state whether OS installation must be either 32 or 64. Thanks for your help. - Josh

Similar Messages

Drivers for Windows 7 64-bit for HP Pavilion 15-p125ng

Can any one help me with Drivers for Windows 7 64-bit for HP Pavilion 15-p125ng? I'll be very grateful for any answers
This question was solved.
View Solution.

Hi:
You should be able to use the drivers and software from this model on yours...
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6936...
When you go to install the graphics you have to install these drivers in this order and reboot after each installation.
1. Intel chipset installation utility.
2. Intel HD graphics driver.
3. Nvidia HD graphics driver.

Bi Publisher Desktop in Windows 7 64 bit for E-Business Suite Development

Hi Guyz,
Please Guide me to install Bi Publisher Desktop in Windows 7 64 bit for E-Business Suite Development?
When I tried to install with below versions it returns an Unexpected Error in the middle.
1) p12395372_10g_WINNT - Oracle BI Publisher Desktop 10.1.3.2.1
2) Oracle BI Publisher Desktop 10.1.3.4.1
3) Oracle BI Publisher Desktop 10.1.3.4.2
Thanks
Fahmy

>
I tried Java 7. But Still I have the same issue.
>
which?
>
But I'm an Oracle Apps Developer and Oracle BI Desktop 11 is not certified with E-Business Suite.
>
where are the details?
IMHO no needs to certify bip desktop with ebs
>
Please Guide me to install Bi Publisher Desktop in Windows 7 64 bit for E-Business Suite Development?
>
i use Bi Publisher Desktop 11.1.1.5 in Windows 7 64 for E-Business Suite r12 Development?
http://www.oracle.com/technetwork/middleware/bi-publisher/downloads/index.html - Oracle BI Publisher Desktop 11.1.1.5.0 for Windows
because i have some trouble with BI Publisher Desktop 11.1.1.6 (Please help!!! BI Publisher Desktop on Windows 7
>
I tried Java 7. But Still I have the same issue.
>
jre or jdk?
from Please help!!! BI Publisher Desktop on Windows 7
>
I had jre installed already but not JDK.
It worked after I installed JDK 7.
>
by anupma.s

Hp solutions centre software download for windows 7(64 bit) for photosmart 3110 printer?

How & where to get the hp solutions centre software download for windows 7(64 bit) for photosmart 3110 printer? The full hp solutions centre software features such as photo editing, etc that can be utilized for windows 7(64 bit) with photosmart 3110 printer

Hi Nogot7, you will have to share 3100 over your network.
On the XP computer .....
Open Printers and Faxes.
Right-click the printer you want to share, and then click Sharing.
On the Sharing tab, click Share this printer and then type a share name for the shared printer.
On the Win 7 computer ....
Go to Devices and Printers
Add a printer
Add a local printer
Select Create a new port:
Select Local Port for the Type of port:
Enter the network name of the XP computer ie. \\XPcomputername\share name
Install the 3100 driver when prompted (DO NOT use the CD but the Win 7 built in driver)
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

DRIVERS REQUIRED FOR WINDOWS 7 (32-BIT) - FOR HP Pavilion g6-2004tu Notebook

Hi everybody!
Today have formatted my Notebook and changed the OPERATING SYSTEM to Windows 7 (32-Bit) (Enterprise Edition)
Need basic drivers for the my HP Pavilion g6-2004tu Notebook for the following devices, currently being Yellow Highlighted by the Device Manager:
1. Ethernet Controller
2. Network Controller
3. PCI Device
4. PCI Simple Communications Controller
5. SM Bus Controller
6. Some Unknown Device
7. USB Mass Storage Device (Although it is reading the Flash Drive)
Your help is requested and reply is anxiously awaited.
Thanks in advance.
Best Regards,
Faraz
This question was solved.
View Solution.

Hello mike_farhat. I understand you're looking for drivers for your G6.
Unfortunately there are no drivers available specifically for Windows 7 32-bit. However, here is a link to the drivers for Windows 7 64-bit.
Another thing you could try is to install both the HP Software Framework and HP Support Assistant. Then you can run HP Support Assistant and the application will scan your PC and automatically download and install any drivers which are available.
I hope this helps. Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

HP Installer Fails on Windows 7 64-bit for CP1020 Series Printer

Hello!
I've been trying to troubleshoot this for days, and I've seen lots of unanswered/unresponded to posts regarding the same matter so I hope someone sees this!
Product Name & Number: LaserJet CP1025nw color CE914A
Operating System: Windows 7 64-bit
Error Message: HP LaserJet Installer has stopped working
Changes made to system before the error occured: We updated our router info, so I ran the installation disk to reconnect the printer wirelessly. It uninstalled the programs originally added to run the printer.
The Details:
Alright, so 3 days ago we updated our router SSID and password for security reasons. Apparently, there's no easy way to update network details for the CP1025nw so I had to run the installation disk. It prompted me to uninstall the software, reboot and then reinstall. I run through the prompts, and then choose "Connect through a wireless network". After searching the network, I then choose "USB Setup of Wireless". I connect the USB when prompted, and as soon as the drivers are installed I get the Windows error message posted above. I have attached a screenshot of what appears as well.
The frustrating thing is that the printer still works after installation, but only through USB connection! I need to get wireless working again, but without the installation software working, I can't seem to make this happen (unless someone knows a hack/work around).
Event Viewer provides the following details on the application error:
Faulting application name: hpbcsiInstaller.exe, version: 1.5.6.4020, time stamp: 0x4bbf9f17
Faulting module name: hppccompio.DLL, version: 1.3.0.24, time stamp: 0x4c9685d0
Exception code: 0xc0000417
Fault offset: 0x000073bf
Faulting process id: 0x970
Faulting application start time: 0x01cdbc45b6632fa1
Faulting application path: D:\Installer\hpbcsiInstaller.exe
Faulting module path: C:\Windows\system32\hppccompio.DLL
Report Id: cb4d353b-2839-11e2-be7e-002564531498
I have tried a vast array of solutions and none of them seem to work. Everything from firmware upgrades, removing all instances of HP files including .inf files, installing with startup programs and services as basic as they can get, etc.
PLEASE HELP!!
Cheers,
Kirk
This question was solved.
View Solution.

Alright, well this was a beast of a problem to say the least. I'm so relieved to be finished with this nonsense.
How it all started - a recap:
We changed the password on our wireless network as we were updating it for security reasons. I couldn't find ANYTHING that allowed for me to update the network details (password or SSID) directly on my printer and everywhere said I needed to uninstall and reinstall everything (and re-run the connect to wifi via USB). This is not the case - there is a much simpler solution which I will also cover at the end of this post. Anyway, as mentioned above, during the stage of installing device drivers, the installer crashes with the Windows message "HP Installer Setup Has Stopped Working".
How I fixed it:
1. Printed a configuration page by pressing down the 'resume' button for a few seconds and letting go. I took note of the following in the upper right corner:
Status: Not Connected
Network in Use: None
IP Address: 0.0.0.0
I got continued to wonder if I could connect to the printer directly through the ethernet port so I...
2. plugged in a cat5 from my laptop to the printer.
3. Printed a second configuration page. Now I got the following information:
Status: Connected
Network in Use: Wired
IP Address: 169.254.71.50
4. I opened my web browser and tried going to 169.254.71.50 but the page wouldn't connect. I recently just built a gaming computer and found a way to bridge internet from a wireless laptop to a wired device (http://www.youtube.com/watch?v=96Z1_6rX5qU) so I wondered if this would work with the printer.
5. Bridged my Wireless and Network connections as per the video above.
6. Opened my web browser and once again tried navigating to 169.254.71.50 and it WORKED! (Not sure if that IP address is unqiue to my printer, but printing a configuration report is the best place to find it.
7. I clicked on the Networking tab and then selected Wireless Configuration.
8. From here I was able to enable my wireless connection, updated my wireless password, and choose the wireless network I wanted to connect to! This is how you can update your wifi information without having to do a complete reinstall!!
9. I now unplugged the ethernet cable (as suggested next to the enable/disable radio buttons. My wireless printer light turned on and stayed on. I was now connected again!!
10. I don't think this was a critical step, but I also set up the ePrint mobile printing
11. I printed another configuration page, and could now see the following:
Status: Connected
Newtwork in Use: Wireless
IP Address: 192.168.1.115
12. I could now navigate back into the printer through my browser using that IP and was able to find and print to my printer wirelessly through my phone, but was still unable to print from my laptop wirelessly.
13. I inserted the original install CD, held my breath and clicked install. Holding your breath here is optional.
14. It asked how I wanted to connect, and as before I choose wirelessly. This time instead of asking me to connect the USB, it FOUND my printer on the network! I selected it, clicked continue and everything successfully installed!
Everything is now back to normal! I can use my printer wirelessly once again. PLEASE let me know if anyone needs more clarification on the above steps, or if something doesn't work for you because there is no other solution out there. Trust me, I spent HOURS AND HOURS looking. I hope this helps some of you!
Cheers,
Kirk

DRIVERS REQUIRED FOR WINDOWS 7 (64-BIT) - FOR HP Pavilion g6-1201sm Notebook

Hi everybody!
Today have formatted my Notebook and changed the OPERATING SYSTEM to Windows 7 (64-Bit) (Home Edition)
Need basic drivers for the my HP Pavilion g6-1201sm Notebook for the following devices, currently being Yellow Highlighted by the Device Manager:
1. Ethernet Controller
2. Network Controller
3. PCI Device
4. SM Bus Controller
Your help is requested and reply is anxiously awaited.
Thanks in advance.

http://www.ma-config.com/en
http://techpp.com/2010/01/12/identify-and-find-drivers-for-unknown-devices-in-windows/
good luck

Movies/Videos stop playing in Windows 7 64-bit for no reason.

In the past couple of months, movies and videos played in iTunes from Windows 7 64-bit have begun stopping during playback for no apparent reason. iTunes does not crash, but this happens multiple times throughout playback requiring the movie/video to be restarted. This problem started with iTunes version 11. However, it does not appear to affect Windows 8.

@Magic_Peter
Can you please advise where in the Registry you set the maxallowedzone to 1.
Was it
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTMLHelp\1.x\ItssRestrictions
so that your CHM could run on a network drive?
I'm thinking that Adobe Reader 11 fixed the problem and the above was just to do with the location of the CHM. Does that sound right?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Is there a "SCCM Package For Windows 7 (64-bit)" for an X220?

Hey all,
i found the "SCCM package for Windows 7 (32-bit) and (64-bit)" for ThinkPad X230s here...
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS034785
...but is there one for the X220s as well? I only see ones for M82, M92p M92, and X230
any help would much appreciated.

That sounds great - actually based on our early research that is exactly the route we've decided to go.
I don't see a document linked in your post, would you mind re-linking?
Specifically, we'll want to include drivers for lots of x210, x220 and x230 varieties - and there are a lot of them that I don't have available for testing - they are many miles away.
Appreciate the help!
EDIT - I found the document linked in another thread and we've used it to pull in all the drivers we require for the 4 models in our environment. thanks!
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/dml_ur_ti_mdt_2.0.pdf

Windows 7 64-bit and CS5

I wrote a script a few years ago that lays out photos on multiple pages in a specialized grid pattern for a classifieds magazine. The script will run normally for about half of the first page and then ID CS5 quits.
I translated a few of the features from CS2 into CS5 when we upgraded and the script functions completely normally on OSX 10.6.4 but when I run it in Windows 7 64-bit it fails. I've replicated the behavior on multiple machines.
When I look at Windows Task Manager and watch the memory usage while the script is running everything seems normal until it reaches about 100MB of used memory, then script execution pauses and the memory usage spikes to over 1GB and ID CS5 quits.
I've tried
1) Running ID CS5 with Administrator Priveleges
2) Running ID CS5 in Compatibility Mode for Windows XP SP3
3) Running ID CS5 in a Windows XP SP3 Virtual Machine
Has anyone else experienced this issue with long running or memory intensive scripts?

That's because you started the 32bit version of Photoshop. On 64bit operating systems both a 32 and a 64bit version is installed by default so if you want to use all your ram then make sure that you run the one from the Program Files and not from Program Files (x86)

Is there a driver for windows 7 64 bit for faxphone L80.?

is there a win 7 64 bit driver for faxphone L80?

Hello rickr,
No, unfortunately a Windows 7 x64 driver is not available. We apologize for the inconvenience this may cause.
Please contact us to find out about other options that may be available to you.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Need windows 7 32 bit for Satellite R630-11L

Can anyone help me to locate Windows 7 32bit drivers for Satellite R630-11L,
I found only for windows 7 64bit

Hi
I didnt find a full range of Win 7 32bit drivers for Satellite R630 on the Toshiba European driver page as you said, just 64bit drivers are available.
You can try to install 64bit drivers on Win 32bit system. In many cases this should be possible.
In cases where this is not possible, try the drivers from other satellite series
Its worth a try
But why you want to switch to 32bit? 64bit OS is better if your notebook supports 4GB RAM or more

No drivers for windows 7 64 bit for PI21AG

I just paid $170 for a Cisco Aironet 802.11a/b/g Wireless PCI Adapter ( AIR-PI21AG-A-K9 ).
I was suprised to discover that it doesnt have drivers for windows 7 64bit. for the price of one of these it should be able to be supported on windows 7.
ive tried to run it on compatibility mode for vista and still nothing. this is very fustrating for an expensive product.

Hello,
I have the same issue; the Vista drivers don't work for me, the computer hangs; what's worse is that they even hang a computer with Vista.
What can I do? This is very frustrating
thanks

Save Web page into PDF in Windows 7 32 bit for Adobe 7

When security under Internet options in Internet Explorer runs with "Enable Protected Mode" checked, can not save web page into PDF. The version of Adobe is 7.
Nazir

Are you saying you cannot print to the Adobe PDF printer or what. You have to be more complete in your description since AA7 will not fully work in Win7. You will have to use workarounds, but knowing what steps you are using is important to giving any help. Just saying save does not help. Of course, you might be able to use the MS plugin for creating PDFs as an alternative if you only have AA7. One thing that you find with AA7 is that PDF Maker will likely not work and also the printer will have to be a print to file, followed with a use of Distiller to complete the PDF creation. The AA7 version of AcroTray that does a lot of the work in the background should not be expected to work with Win 7, thus the need for workarounds.

Hp deskjet 5940 drivers for windows xp 32 bit

hello!
who can help me find a driver for windows xp 32 bit for my hp deskjet 5940?? the drivers that you download from hp website is for xp 64 bit!
thanks
Ans

thanks for your help!
I tried this but it does not work for my windows xp 32 bit!
I have tried many a driver but I can not find anyone!
I do not know what to do ...

Windows 7 32-bit or 64-bit for CS5?

Similar Messages

Maybe you are looking for