Windows 7 64 bit and quicktime pro not working

Audio plays, but no video. Any suggestions?

Most likely QuickTime doesn't have a codec for the video. Open the movie, open Movie Inspector (under the Window menu) and post the information on format that should show. Someone should be able to tell you if there's a plugin available for that format, if it's not one QuickTime can handle natively.

Similar Messages

  • My home sharing between windows 7 and macbook pro not working

    My macbook pro is not pulling up my windows 7 home sharing?
    The itunes 10.5.1 is my version

    Welcome to the Apple Community.
    It isn't homesharing that allows iTunes on your PC to see your iPad when connected. You will likely get better answers to your questions in the iTunes for windows community.
    https://discussions.apple.com/community/itunes/itunes_for_windows

  • TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

    I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

    Try this:
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work.  How can I download it to my laptop that has Windows 8?

    I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work.  How can I download it to my laptop that has Windows 8?

    You can get it at this link and validate with your 24 digit serial number - click here for PSE downloads

  • I just downloaded a few ITunes Apps to my PC using windows 8 and they will not work.  Suggestions?  Thank you.

    I just downloaded a few ITunes Apps to my PC using windows 8 and they will not work.  Suggestions?  Thank you.

    The apps can only be run on an iOS device.   They will not run on your PC.

  • Windows Vista and iTunes does not work

    First Time sorry for my bad English, I'm from Germany and my English is not the best.
    I have the new Windows Vista but iTunes does not work good.
    And I have to use it, to manage my music on my iPod.
    When there will be a Vista compatibles Version of iTunes??
    And when will come an 64-Bit Version?
    Thanks for Help,
    Karsten

    iTunes running under VISTA does not recognize media burned by iTunes Backup (v7.0.2) from a non-Vista machine.
    The original machine recognizes the media just fine, but the new VISTA machine does not recognize the dvd at all.
    Anyone else having a problem with VISTA recognizing burnt media?

  • Update to Quicktime Pro not working

    Just bought the Quicktime Pro license key from the Apple Store. When I input my name and the key and click "Apply", a label states "QuickTime 7 Pro". However, this information seems not to persist: After closing the registration window and re-opening the same window later, it states "Buy Quicktime Pro...". All the menus still contain the "Pro" label and I am unable to save any movie.
    I uninstalled Quicktime and re-installed it with a fresh download from the Apple site. To no avail.
    Any ideas what I am doing wrong here?

    My user account belongs to the local Administrators group. Nevertheless, I tried to use the function "Run as Administrator" function to make sure, Vista really runs Quicktime with all privileges. Did not work.
    For the second time, I uninstalled the software, then I deleted manually the folder C:\program files\ (since QT Uninstall leaves tons of files there - no wonder I can't get past the problem).
    I rebooted the system and downloaded the setup files again. Ran the installer "as administrator". Ran Quicktime Pro as Administrator. It still doesn't remember the Pro functions after having unlocked that functionality using the key obtained from Apple.
    At this level, I have to give up. I spent two afternoons on this and I need to get things done. It's probably not a QT Pro problem and I might need to restage my computer in the future (I upgraded XP Pro to Vista Ultimate - instead of doing a fresh installation). However, since QT Pro is so far the only software giving me a headache, I am not really feeling the urge to re-install the operating system.
    Maybe an upcoming QT release will fix the problem...

  • ITunes and QuickTime will not work..Yeah, another one

    Despite my best efforts to try to solve my problem on my own and not both you kind people, I've been working on and off at trying to get my iTunes working, with no positive results at all. It's honestly been so long, I don't recall what might have sparked the issues, but every time I try to open iTunes or QuickTime they will begin to open but fail, bringing up the common windows error message:
    iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.
    QuickTime Player has encountered a problem and needs to close. We are sorry for the inconvenience.
    So far, I have totally deleted both iTunes and QuickTime twice from my computer- first just through Add/Remove Programs pathways, then more in depth with Registry Crawler to try to remove any traces of the programs- all before re-installing the two programs. Both times have failed, still leaving me unable to open either program, so I've broken down and come here- hoping to find anyone willing to lend a hand to help fix this issue so that I can finally listen to my music the way I used to.

    Perfect information, thanks.
    That combination is almost always caused by some application stashing old QuickTime componentry down in your system files. (Codec packs and video converters are the usual suspects, although some Games might do it too.)
    Let's go looking for the old stuff.
    1. Open My Computer from the desktop or Start menu.
    2. In the Tools menu, click Folder Options.
    3. Click the View tab.
    4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
    5. Click OK.
    Now in My Computer, open your C drive.
    Open the "Windows" folder.
    Open the "system32" folder.
    What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • Exporting .mov to H264 in Quicktime Pro not working for iPad!

    Good morning All, Thanks for your help. When I take video's with my digital camera it records in Quicktime, however I have always had to export the videos with QuicktimePro in the H264 codec for them to transfer to my iPhone. What is happening with the iPad, is that when I export them to that or mp4 it says this movie could not be played on the iPad. The only work around I have found is to hit the advance tab in iTunes and convert it, then drag them out and back into iPhoto (because I want the videos with the event in Photos). Is anyone else having this issue? Any Suggestions? Thanks!!!

    Who has similar problems. Who has workarounds.
    Interesting... but wierder and wierder!
    Not sure it is much of a workaround, but I just loaded my H.264/AAC M4V Harry Potter 7 file into QT 7 Pro and deleted chapers 2 through 30. While I agree that I cannot currently save the edited data as a standalone file, I could save it as a reference file that is non-compatible with QL under Mavericks. However, if I then open the reference file in QT 7 Pro, I could then use the "Movie to MPEG-4" option to "Pass through" both the audio and the video to create an MP4 file that will open in both QT X v10.3 and QT 7 and is QL compatible.
    As to your subler workflow, while the MP4 file I created with subler did not open in QT 7, it did open in QT X v10.3 and the H.264 video track was QL compatible. I suspect the reason the MP4 file won't open in QT 7 and why QL won't play the Photo-JPEG track is that QT 7 and QL consider the secondary video track that is created by Subler to be "out of spec" for the MP4 file container. On the other hand, if I place the H.264/AAC data in an M4V file container, then it opens in both QT 7 and QT X v10.3 and both the H.264 and the Photo-JPEG tracks are QL compatible.
    Nice catch on your part as I am still reviewing the QT X v10.3 forced conversions and had not even started looking as Subler. Also do most of my editing before conversion to H.264/AAC/AC3/Chapter output to M4V so it did not dawn on me to try and edit my M4V files. Thanks to your comments have learned that Subler does not like my AC3 DD5.1 audio track (now seems to cause an infinite loop in Subler due to Mavericks reading of AC3 audio track as having a 0 Kbps data rate) and QL now handles multiple video tracks. (Mavericks—one step forward and two steps back as far as QT is concerned.)

  • Net-Weaver 4.0 installed on Windows-7 . and  RRMX is not working...

    Dear Experts,
    We are using Net-Weaver 4.0 ,  BW 3.5 and Office-2007. But recently we have installed these over WINDOWS 7.   
    Previously it was working fine with WINDOWS - XP.
    And now after installation , when I put RRMX transaction. I am getting error.
    Please suggest , What shall I do ?
    Thaks,
    Utpal

    Hi Utpal:
       Probably you need to install a Front End Patch (FEP), with an "S" account you can download it from the SAP Marketplace.
    What is the error message you get? search for related SAP Notes with details on this issue resolution. For example SAP Note 1533608 recommends installing FEP 400 of BW 3.5 Add-on of GUI 720 to solve issues with RRMX Transaction Code.
    To download the file do the following.
    1. Open the link https://websmp102.sap-ag.de/support
    2. Click on the Tab "Software Downloads"
    3. Click on the Section "Support Packages and Patches"
    4. From the Menu on the left Click on "Browse our Download Catalog" option.
    5. Click on the link "SAP Frontend Components"
    6. Click on "BI ADDON FOR SAP GUI"
    7. Click on "BW 3.5 ADDON FOR SAP GUI 7.20"
    8. Click on "Win32" to display the list of available FEP for download.
    Regards,
    Francisco Milán.
    Edited by: Francisco Milan on May 26, 2011 10:00 AM

  • Windows 8 and RD gateway not working!

    I have Windows server 2008 (not R2) server running RD gateway and now finding that any client that has upgraded to windows 8 can longer connect via the RD Gateway server.  We are using domain\username to log in as we have always done with windows 7
    RDP client (which just worked).  After reading a number of posts where certain "fixes" or "workarounds" have worked sadly none of these appear to apply to our setup.
    I have made sure that ignore client certificates is set to ignore and restarted IIS, I have chacked the server logs and there are no failed logon events, in fact the authentication succeeds but the session isn't created.
    Running out of ideas now...any help?
    drac

    Hi,
    Thanks for the response, to answer your questions...
    a. How did you judge that the authentication succeed, but the RDP session created failed?
    There is an entry in the security event log showing a successful authentication request and no failures logon events for the time the user tried to connect
    b. Are there any errors/prompted warning message when the issue occurred? If yes, please provide the errors/warnings to us.
    There are no errors or warnings at the client side as such, the logon box just reports logon failure username or password incorrect and then re-prompts for UN and PW
    c. Do all the Windows 8 clients have the issue or only some of them have the issue? Does the issue also occur on Windows 7 clients?
    This happens with all Windows 8 clients or any Windows 7 client that has updated the RDP client to 6.2.9200, all other clients work ok.
    d. Please let us know the Windows Server 2008 TS configuration information
    Windows server 2008 (not R2), registered on the domain, with licensing server, TS gateway and session host added features.  SSL certificate purchased from trusted CA. CAP configured to allow all domain users and RAP configured to allow access to
    all resources.  Server has been working happily away and still does for the majority of clients.
    Hope this helps, let me knew if you need any further information.
    Regards
    Drac

  • Window 8 and Adobe does not work on Internet 10

    I have Window 8 and running Internet Explorer 10 and when I go to a website that need Adobe to run the program, it tells me that I do not have Shockwave is enabled and ActiveX Filtering is not, and I have ran all the test that is aked on the site to check it out and everything is okay.  I am not sure how to get it to work, any ideas?  Runnng 10.1.5 Can anyone help me out?

    Could you verify that you are using the desktop mode of IE and not the modern version?
    http://forums.adobe.com/message/4814662#4814662

  • Windows live and yahoo messengers not working

    Hi,
    I have a blackberry 8520 using V5 OS and downloaded the latest service books as well as the latest version of windows live and yahoo messengers. The problem is i try to log onto either of them and its justs tries to login with no success, i  am on a pay as you go tarfiff  with access to wifi. Anybody got any ideas how i can fix this problem. many thanks in advance.

    Hi and Welcome to the Community!
    With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive to your Messages app
    2) Resend Service Books (pre-BB10 devices only)
    KB02830 Send the service books for the BlackBerry Internet Service
    Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
    3) Reboot
    With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support...and to find out if, via the plan you are paying for, you even should be expecting these services to function. Many services will not function without an adequate data plan, even via WiFi...but only your carrier can tell you exactly what services you can expect to work with your plan.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • WinHelp, Windows 8 and Ultrabook - macros not working

    Our products are generated for WinHelp 2000 using RH9 for Word
    The user has symptoms typical of macros not working. This has normally been caused by the user not properly doing the step described in the Knowledgebase article at http://support.microsoft.com/kb/917607 regarding " How to enable macros on a single computer after you install the WinHlp32.exe"
    I have updated a machine to Windows 8, performed the Knowledgebase article items and our products work fine. I have also verified that the user's machine has the correct registry settings, so it looks like Windows 8 is not the culprit. That leaves the Ultrabook
    This combination of Windows 8 and Ultrabook is quite new and I am hoping someone using WinHelp 2000 has already run into it.
    Please let me know if so.
    Thanks

    David
    On rereading this, I am not sure I follow.
    You say "I have updated a machine to Windows 8, performed the Knowledgebase article items and our products work fine."
    So on your machine it is OK but not on that of a user who has an Ultrabook, is that the case? If so, I'm not sure how to help as it is machine specific. Are you 100% sure they downloaded the right viewer and installed it with admin rights?
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Itunes and quicktime do not work

    When i open itunes, there is a message saying that error has occured, and itunes must be closed, but no error number has shown. When I visit website with quicktime, a message says that an error ocurred inside a plugin inside the page. I did an update quite a long time ago, but since then both software can't work again. I've tried to shut down the antivirus system(NOD32), installing and uninstalling many times.
      Windows XP  

    I cant access the link!
    Ooops. Sorry about that.
    Let's try some copy and paste work then.
    Let's first try swapping out your QuickTime.
    head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Maybe you are looking for