Windows 7 64-bit and the 27" iMac (NOT the black screen issue)

I'm trying to install Windows 7 64-bit Ultimate on a brand new 27" Core 2 Duo iMac. So far, I've been met with miserable failure. So far, installation starts without an issue, and gets to the point where "Expanding Windows files" is in bold text. It sits at 0% for approximately 10 minutes, then gives me an error saying that files could not be copied from the disc. (The error code is 0x80070017) The installer then quits and asks me to restart.
I've used two different copies of this disc (Bought at best buy, not downloaded or pirated) with the same result. Am I missing some crucial step, is there an issue with this model iMac, or is there an issue with my particular iMac?

Yeah, I'm using Boot Camp assisstant. I've got the 1TB drive split into 750GB for OS X, and 250GB (Reads as 232 in Win7) for Win7.

Similar Messages

I'm running windows vista 32 bit and the dep shuts down my itunes

I'm running windows vista 32 bit and windows DEP shuts my itunes down as soon as it begins to load. Help?

"the registry settings used by the itunes drivers for importing and burning cds...."
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Windows Vista 64-bit and the Backup & Restore....

I've recently found out that Backup & Restore is not supported by Vista 64-bit. So, all the backups that did not complete and has the error message (0x8007002), all the backups are of no use. All of my documents, pictures, music, original
music materials, etc., are all gone. Can't even open the error-ed backups! Can my system be restore to it's original settings before the backup fiasco? I am at a lost to what can be done!
Sincerely (feeling hopeless)
Rapport1951

Please post in the appropriate Vista forum found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=windowsvistaitpro
This is a Windows 7 forum.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

I have bought a new laptop and the the system is windows 7 64 bit and the software wont install

I cant install the ipod software on my new laptop message that appears is this software will not install on 64 bit systems

It will clear the phone. You need to restore the backup you made of your important files from the old computer (surely no one in the third millennium who uses a computer does not back it up regularly).
You can recover iTunes-purchased music, videos and apps from the phone, but not music from other sources. Connect the phone, do not sync, and choose "Transfer Purchases" from the File menu.
Photos in the Camera Roll can be transferred buy using the Camera Wizard on your computer.
Contacts and Calendar can be synced with apps on your computer; just make sure there is at least one entry in each app on the computer before syncing.
You are out of luck if you have photos in the Photo app on the phone; there are apps for your computer that can extract them, but they will be lower resolution than originals because they have been optimized for the iPhone's resolution.

I have an early 2011 macbook air 13..just installed windows 7 64 bit and my trackpad does not works and also my backlit keyboard does not function.tried almost everything. No help

I am using Macbook air 13". i have installed windows 7 professional on it. I downloaded windows support drivers using bootcamp. Even after installation of drivers my trackpad does not works. Tap & swipe features does not work.i am using a wireless mouse. Also there is no light in my keyboard anymore.
I did try all possible help i could found on internet. But no go.

Hi Thank you, the apple mobile service links did not work, i had tried them all. however that same link with the previous versions worked. I had to download the one below and I can at least use itunes.
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
I tried this one but it did not work.
iTunes 12.1.0.71 for Windows (64-bit) - itunes6464setup.exe(2015-01-28)

My iphone went dead and was shutting off...but I've had the circle and the black screen for hrs..what should I do?

I've tried plugging it..trying to turn it off...everything and nothing works...

Try a Reset, hold together Home and Power buttons for about 15 seconds until iPhone restarts.

IMac G3 CRT Black Screen Issue

I recently got a 400 Mhz iMac G3 from a friend who wanted to get rid of it. It has one problem: for some reason the CRT will not display anything. Immediately when I push the power button on, the monitor sounds like it has been turned on, sometimes even flickers at the edges, but just doesn't display anything. The VGA output on the back of the Mac works fine, it has the most recent firmware (4.1.9), the power button doesn't flash, nothing. Everything seems to be working fine except for the monitor. To me it sounds like a video connection is loose or somehow disconnected, but I don't want to have to mess around inside of it if there's an easier solution. Thanks in advance.

Hi! Same info is required about type of computer you have as I listed in the post you replied to.
At first, your problem sounds like the firmware was not updated to 'iMac Firmware Update 4.1.9' before you upgraded from OS9 to OS10 - and there is one possible solution I've read of that worked with an imac 233 MHz - in that you've got to take out the logic board and use a different computer and/or screen 'set-up' to install the firmware update on that logic board,and then put it back into the original machine it came from and start it up while you cross your fingers!!! - and hope the screen comes alive again. tricky stuff that may not work.
However that may not be your specific problem - it may be the hard drive gone or something else (we hope).
When you reset the PRAM did you allow for the 2 separate chimes to sound before restarting your machine? That's really academic if the firmware is the problem - but I thought I'd ask.
So tell us what sort of iMac it is - place it upside down on a soft cloth and on it's neat little bottom it should have a description - like say,
- IMAC 600/GR/256/40/CDRW/ULTRA/56K/FW/VGA -
or just tell us if it's slot loading or tray loading, what colour, and anything else about it's model that you already knew - speed e.g. 400MHz - does it burn Cd's or jsut read them - stuff like that.
thanks
Gregg

The Windows 7 Black Screen Issue

I am putting in Bootcamp with a Windows 7 install. I checked these forums and made sure I had all my prep work done.
I referenced article TS3173 and downloaded the neccessary drivers for 7, formatted a 16GB SD Card as FAT Bootable and copied the drivers and autounattend.xml files onto the root of the drive.
THe installation as going as planned but at the end I'm still ending up with a black screen. Windows is installed ok but on the restart after" Preparing for FIrst Use" comes up the screen goes black.
Obviously, the drivers are not being installed from the SD card, I tried it on a USB External driver as well. Am I missing something here? I read every post I could find on it and I can't see where I am doing anything incorrectly.
Thanks
Tom

You don't need Paragon or another NTFS driver. That may work (I've used it, but I was using a full hard drive anyway to begin with).
Apple's method:
http://www.apple.com/support/bootcamp/
*My iMac (27-inch, Late 2009) displays a black screen during installation of Microsoft Windows 7 using the Boot Camp Assistant. How do I fix it?*
The Windows 7 installer does not include required graphics or Bluetooth drivers for this computer. To obtain the necessary drivers and resolve the issue, see this article (creating the SD card and drivers for the "black screen" issue).
http://support.apple.com/kb/HT3986
http://support.apple.com/kb/TS3173

My MacBook Pro will not start up. I only get a grey screen with the spinning wheel. No blue page appears and the grey screen remains. Tried starting with the Shift key but ineffective as well.

Can't get my MacBook Pro to start up. Have shut it down several times and tried restarting but all I get is a grey screen with the spinning icon. Apple Support online suggested starting with power button followed immediately with the shift key. Same results. Also tried power button with shift key, command, and V. Black screen appeared instead with lots of data language but still no starting. This final page was suppose to result in an internal system check and restart but nothing happened and the black screen remains.Where do I go from here? Scheduled for the Genius Bar tomorrow but would like to resolve this beforehand.

You may be having a hardware problem that you cannot resolve on your own. Nevertheless...
...hold down the command and R keys whilst booting to try to get to your Recovery partition. If you can, use Disk Utility to try to Verify your boot drive (usually named "Macintosh HD" unless you've renamed it). If the verification fails, try to repair your hard drive. If everything appears to be OK, restart.
If you can't get into your Recovery partition, your problem is likely hardware related. If so, keep your appointment and see what the Apple techs have to say.
Clinton

My phone is frozen with the black screen and apple. wont conncet to itunes

i have it connected to usb and it wont read teh phone at all.

HI Eric, thanks for responding, i have done that. it flashes a quick shut off and when i turn it back on nothing. i then tried to hook it up to computer with usb and itunes and it is not reading anything? any clue what could have happened? here is what i did ... earlier, my battery going low, so i decided to plug it in to outlet. when i went back to it, it didnt look like it ever charged and the black screen with apple was on it ..

When i turn on my Ipad air In the cornors of the Black Screen It has white stuff near the top bottom left and Right When it's all it turned on it's fine But when I go to a black Background It does the Same is this normal?

When i turn on my Ipad air In the corners of the Black Screen It has white stuff near the top bottom left and Right When it's all it turned on it's fine But when I go to a black Background It does the Same is this normal
It
I
O

when I turn on my ipad and the black screen comes on I have a slight white light running along the bottom meaning the whole screen is not black. Is ths normal.
better details Sorry
N

I have an epson T50 shared network, which is connected to a computer that runs on Windows 7 64-bit. The 10 days Apple has updated the printer drive and since then has been trying to print the following message: / Library/Printers/EPSON/InkjetPrinter2/Filt

I have an epson T50 shared network, which is connected to a computer that runs on Windows 7 64-bit. The 10 days Apple has updated the printer drive and since then has been trying to print the following message: / Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS/ rastertoescpII failed.
What should I do?

The first thing you should do is re-write your post to make it a bit more understandable. I got you have an Epson printer connected to your PC, however after that your post doesn't make any sense. Are you attempting to print from your iMac, if so then you need to download and install Bonjour for Windows on your Windows machine. Then set Windows so it has printer sharing turned on and then on the iMac simply follow Apple's instructions for adding a printer.
http://support.apple.com/kb/DL999
http://support.apple.com/kb/HT4670

TS4123 This is not correct solution. I have fresh copy of Windows 7 64 bit and I have the same problem. Autorun only shows the Bonjour service. It started when try to sync more than one iphone.

This is not correct solution. I have fresh/new copy of Windows 7 64 bit and I have the same problem.
Autorun only shows the Apple Bonjour service. It started when try to sync more than one iphone over WiFi. I have two iphones and an iPad. I turned off syncing over WiFi and still has high CPU utilization. One of the CPU's is pegged at 100%. It is the AppleMobileDeviceService.exe process.

For the record, I then followed the suggestion of MarcDCMB in https://discussions.apple.com/thread/4291206 of just manually restarting the Apple Mobile Device service in Windows services.msc once each time after starting iTunes and the service no longer hogs CPU after that service restart. Not too painful as a work-around, and apparently an effective one, but clearly not a solution to the problem. Again, as above, all the other solutions didn't work for me and I have no conflicting software as far as I can tell. So you'd have to say this Apple's problem.
Also FTR, I am still on the 5.2.0.6 version of the Apple Mobile Device Support MSI and I don't know if that is relevant to this work-around working but my sense is that it is NOT relevant. I'll report back on this thread if I re-upgrade and the problem returns in spite of the service-restart approach.

Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open

Windows 7 64-bit and the 27" iMac (NOT the black screen issue)

Similar Messages

Maybe you are looking for