Windows 7 64-bit black screen and blinking cursor for ages before boot

Help!
I'm having the black screen with blinking cursor whenever I try and boot up Windows 7 Ultimate 64-bit thru Bootcamp on my MacBook Pro. If i let it just sit there for maybe 2 or 3 minutes, it then goes to the Windows Boot Manager screen and allows me to click on Windows 7 and the it boots perfect. I've tried installing it twice, same thing. No problem booting OS X Snow Leo 10.6.3. Got the right NVidia drivers installed, makes no difference. Have Paragon NTFS installed so I can get thru to NTFS partition from OS X. I badly need Windows too and don't wanna slow it down by running it in Parallels or VMWare Fusion. A little help?
Thanks a lot!

Solved! Here's what worked for me, it's located at:
http://discussions.apple.com/thread.jspa?messageID=11567814#11567814
(scroll further down, Option 3, you'll see one or two others had success with it too)
Message was edited by: rapture_elk

Similar Messages

Black screen with blinking cursor while trying to boot from Win Install CD

I'm running Leopard with all updates on a brand new MacBook Pro.
I initially had no problems with Boot Camp - the Assistant partitioned my drive, I put in my Vista DVD and hit Start Installation and the MacBook rebooted from the Windows DVD just fine. I made a mistake, however, when I used my retail Leopard disc instead of the install DVDs from my new MacBook, so the wrong drivers got installed and things were a mess. It wasn't painful setting up Boot Camp, so I decided I'd just go back into Leopard, wipe the Windows partition, and retry.
The Boot Camp Assistant had no problem merging the boot camp partition back with the main one, then making a new boot camp partition (I'm not sure if this was necessary, but I did it). I then put in my Vista DVD again and hit Start Installation. The MacBook rebooted, but not into the DVD - it just sat at the black screen with the blinking cursor in the top left corner. After 10 minutes of nothing, I held the power button to shut the MacBook down and tried again - same thing. I booted back into Leopard and tried Start Installation again - same problem. I remerged the boot camp partition, restarted the MacBook, then made a new partition and tried the Vista DVD - again just that blinking cursor.
What went wrong and how do I fix it?

Try resetting the PMU. See link here.
http://discussions.apple.com/thread.jspa?messageID=7188736
I tried everything mentioned previously (in this thread AND the link thread) and the PMU reset (shutdown, pull out power cord and other cords, wait 30 seconds, plug back in and restart) let me continue to install windows after partitioning the HD. Good luck!

Boot Camp: Early 2011 MacBook Pro boots to black screen with blinking cursor after windows 7 installation.

I bought and downloaded the windows 7 ultimate edition 64 bit iso, then proceeded to perform a correct burn to a DVD one at the slowest speed and one at the fastest. all went well. so I open Boot Camp assistant and follow the instructions to the letter, downloaded the driver support to the flash drive. partitioned my drive with more than enough room 150 gb. its starts its install. I get through everything seamlessly where I put in my info all with the exception of my activation code. yet it still continues to finalize the install and does another restart. boots back up to either A. black screen saying press any key to boot to my install disk. B. if I take it out just a white curser. also I read it may be because I had the flash drive in while I was trying to boot so I removed it as well, same result. any input would be much appreciated.

Boot Camp- Windows installation boots to black screen with blinking cursor.

Black screen w/blinking cursor hp dv6700 please help me out someone!!

My dv6700 running vista 32 bit has shut down on me and when i try to start it I get the first HP screen and then get stuck on a black screen with blinking cursor.....so i can't get to the next screen to press F8.....I went to this page to download iso file to make a recovery cd http://downloadcenter.intel.com/Detail_Desc.aspx?lang=eng&DwnldID=15074 and then used IMGBURN program to burn iso to cd....then put the burned cd into my HP cd drive and started it up but still to the black screen with blinking cursor.....then got into my bios screen on the next try to change boot order to start with cd drive but same thing...black screen blinking cursor.....I really hope someone can help me out here.......I've never posted on any forum ever...always googled everything myself cause i wasn't sure if i'd actually get a response on a forum....so i'm hoping i've been wrong this hole time......

Hi,
I don't think the ISO you downloaded will provide the necessary repair options you need to try, so I'd suggest first creating a retail Vista installation disc and using the repair options this provides. A full description of creating the disc ( including links to the Vista Image downloads ) can be found on the following link.
http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3317.2-3-microsoft-windows-vi...
Once created, tap away at the esc key as you start the notebook to enter the Start-up Menu. Insert the Rescue CD. Select Boot options ( usually f9 ), use the arrow keys to select the CD/DVD drive and hit enter. You may also get a prompt to 'Press any key to continue' - do this if asked.
When loaded, select Repair Your Computer and choose the Command Prompt. When this loads, enter the following commands and hit enter after each one - include spaces as shown.
Bootrec.exe
bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd
bootrec /fixmbr
bootrec /fixboot
Remove the Rescue CD and try rebooting the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Toshiba sattelite pro ( SPM30 ) problem with black screen and white cursor

I have a toshiba SPM30 from a friend and I couldn't succed to resolve the problem with black screen and white cursor.I can enter in bios using F2 and I can use F12 but is not booting, I have some CD and DVD with Win Xp but it seeams that is not booting.I've traied to change the order in boot order: first CD/DVD and after HDD but still is not working...I saw that a HDD I can see details about it but at CD/DVD I can't see...I think that the CD/DVD is not working( but I can see the light and hear the sounds when I put a bootable CD or DVD)...Please, if someoane can help me......( byt the way I've traied to remove the bios battery and still is not working...)

Try f8 and try the repair your computer options
This explains advanced start up options:
http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-...
This explains start up repair:
http://windows.microsoft.com/en-us/windows/startup-repair-faq#1TC=windows-7
A system disc can be used for these repair options also, in your case if the DVD drive is not working you can use an external dvd drive if you have one.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

When I turn on my iMac, it shows a black screen and says 'No bootable device - enter boot cd and press any key'. Not sure how to fix this.

When I turn on my iMac, it shows a black screen and says 'No bootable device - enter boot cd and press any key'.
I'm not sure what to do, I did not recieve a cd with my mac to boot it up (I ordered it online).
Also I can't find my harware serial number (I've tried many times to input what I thought it may be from my receipt). I saw that I need this number to contact apple support, my 90 day complimentary support is still valid so I wish to contact them.
I don't know much about apple products as this is my first apple computer so any information is helpful.

Hold down the Alt/Option-key at startup of your iMac to get the Boot Selection screen.
From that choose to boot into OSX.
Once in OSX go to System Preferences then Startup Volume and reset your OSX to be the default.
The new iMacs have OSX 10.7 Lion preinstalled and don't come with any CD/DVD anymore.
Instead OSX Lion includes a new feature called "Lion Recovery".
Have a read here About Lion Recovery
Stefan

Windows xp install -- black screen with no cursor

I've seen a number of posts about Boot Camp installation problems involving a black screen with a blinking cursor, but my problem is simply with a black screen. On my MacBook Pro 15" Core 2 Duo (graphics card: ATY,RadeonX1600) I'm able to partition the HD, but then after I'm prompted in Boot Camp to insert the Windows XP install disk, the computer attempts to restart and install, but after a flash of grey screen, the screen goes totally black, and eventually the optical drive powers down (after whirring for a while) -- no cursor, no nothing. I've tried a number of suggestions I've seen elsewhere: my firmware seems up-to-date (at least that's what I'm told when I try to run both EFI and SMC firmware updates); the Windows XP is a brand-new, single-disk, SP2 install disk; I've tried holding down the option key upon reboot and selecting windows start-up. I've used Parallels with no problem under 10.4.X, but recently upgraded to 10.5.2, and thought I'd try a Boot Camp installation for better access to peripherals. Any suggestions?
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro2,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP22.00A5.B07
SMC Version: 1.12f5

Hello to all and it wanted to request aid to them on this subject, days ago I acquired a Imac 24"2.4GHZ Aluminum (generation previous to the last ones sent for a month),then it is that I have years with my macbook pro and always I have used bootcamp since was beta in Tiger, so installation experience I believe that I have a little.
The problem is that in it is new machine I have partition my disc with the assistant without no problem, but when it is going to install Windows XP or Vista (the 2 I have them original) and boot the machine, it remains in gray screen and no nothing happens, reason why boot with option pressed and they leave systems both to me, followed this I select Windows and it is hoisted in the screen that nor the leader of the mouse moves.
I have made the procedure as 10 times and proven with different sizes from partition (with its respective disc repair with the DVD of Leopard and the disc assistant) and nothing.
Finally uses WinClone in my macbook pro and clone my partition of Vista Windows, recovers it in the Imac without no problem and it appears to me in startup but the same, I select Windows and there it remains. Fiirmware of the updated machine this and I am in OSX 10.5.3. I have proven everything until changes to the memories and nothing. Them request if somebody has had east problem and to most erudite of the forum I request aid to them to see if they can give me.
Beforehand a million thanks to all,

Black screen with blinking cursor when installing win 7/vista x64 osx 10.6

i am using bootcamp 3 to install windows 7/vista x64 on osx 10.6.6.when i select install mac reboots and then all i get is a black screen with white cursor.
i have created a 20gb partition with disk utility in fat32 and i had installed windows successfully when i was on osx 10.5.i tried erasing and creating new partition but same problem.
any help will be appreciated

This solved it for me!
From another forum:
"1. Put the Windows 7 installation disc in the disc drive, and then start your computer.
2. Hold down Option key till all available disks are displayed and select DVD. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then 4. click Next.
5. Click Repair your computer.
6. Click the operating system that you want to repair, and then click Next.
7.In the System Recovery Options dialog box, click Command Prompt.
Type (these commands are safe)
Code: Bootrec.exe /FixMbr
Code: Bootrec.exe /FixBoot
Code: Bootrec.exe /RebuildBcd
*Press ENTER after each command.*
*Restart your computer.* "

Windows 7 on Boot Camp stuck at black screen with blinking cursor... starts up fine in Parallels desktop

Hi,
Recently my dad's Windows 7 (Ultimate 64-bit) on his Mac Pro has stopped working. It gets stuck at a black screen with a blinking cursor. I've waited at least five minutes and it doesn't do anything, I have to power it off.
However it starts up perfectly fine and intact in Parallels desktop. If I insert the original installation DVD and boot from the Disc that says 'Windows' it will boot into the partition and work fine, unless I press a key to boot from the DVD.
I find both these things to be strange. The partition is backed up, which is fine, but I'd rather not have to re-install it if possible.
I have booted from the DVD and tried to repair the disk. It said it found a problem with something related to startup and that it needed to restart to repair it. I clicked yes, and then held alt/opt and (I think wrongly) booted back into the disc rather than the Windows partition. However it now says that it can't detect any problems.
In the repair my computer section when booting from the DVD, it detects the OS as Windows Vista Business. I followed these steps I found online:
Fixed! Peroblem was I think using OEM, which Bootcamp advise against using... they advise to use retail only. Fixed like this:
1. Put the Windows 7 installation disc in the disc drive, and then start your computer.
2. Hold down Option key till all available disks are displayed and select DVD. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then 4. click Next.
5. Click Repair your computer.
6. Click the operating system that you want to repair, and then click Next.
7.In the System Recovery Options dialog box, click Command Prompt.
Type (these commands are safe)
Code: Bootrec.exe /FixMbr
Code: Bootrec.exe /FixBoot
Code: Bootrec.exe /RebuildBcd
*Press ENTER after each command.*
*Restart your computer.*
Done. Rockin'
FixMbr was successful, as was FixBoot. However RebuildBcd reported that it found no Windows installations.
Does anyone know what could be wrong here? I should note that recently I removed the drive Windows 7 is installed on and put it back in. Also Windows Updates probably have been done by my dad. Not sure if they could be the problem.

Cult, welcome to the forum.
It sounds like you have a failing power supply unit (PSU). This will cause the symptoms that you describe. If the computer isn't getting enough power, it can cause numerous problems. You can try disconnecting any unnecessary components to see if it will boot. Here is a guide to help you troubleshoot the problem.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Windows 8.1 installation: Black screen with blinking cursor

Hi!
Trying to install Windows 8.1 on my MacBook Pro. Worked fine last time I tried. Now, however, using the same DVD, after `Press any key to boot to CD or DVD...`, I'm taken straight to a black screen with a blinking cursor and nothing is happening.
I've seen similar cases, ie. Black screen with only mouse cursor on it - Windows 7 instalation Solved - Windows 7 Help Forums - but they usually occur after the installation welcome screens etc., or after the install itself has succeeded.
I just ran `fsck` and found no errors.
Thanks!

Hi!
Trying to install Windows 8.1 on my MacBook Pro. Worked fine last time I tried. Now, however, using the same DVD, after `Press any key to boot to CD or DVD...`, I'm taken straight to a black screen with a blinking cursor and nothing is happening.
I've seen similar cases, ie. Black screen with only mouse cursor on it - Windows 7 instalation Solved - Windows 7 Help Forums - but they usually occur after the installation welcome screens etc., or after the install itself has succeeded.
I just ran `fsck` and found no errors.
Thanks!

GDM displays only a black screen and a cursor, before login screen

I'm using the xf86-video-ati driver for an R9 270, and GDM (v3.16.1.1) only shows a black screen with cursor. I can run TWM fine with startx, and I've got 2 displays attached via DVI.
Here's my Xorg.0.log:
[ 2.743]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 2.743] X Protocol Version 11, Revision 0
[ 2.743] Build Operating System: Linux 3.19.2-1-ARCH x86_64
[ 2.743] Current Operating System: Linux spitfire 3.19.3-3-ARCH #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015 x86_64
[ 2.743] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda2 rw nomodeset
[ 2.743] Build Date: 14 April 2015 10:34:18AM
[ 2.743]
[ 2.743] Current version of pixman: 0.32.6
[ 2.743] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2.743] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2.743] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 29 02:52:10 2015
[ 2.744] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2.744] (==) No Layout section. Using the first Screen section.
[ 2.745] (==) No screen section available. Using defaults.
[ 2.745] (**) |-->Screen "Default Screen Section" (0)
[ 2.745] (**) | |-->Monitor "<default monitor>"
[ 2.745] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2.745] (==) Automatically adding devices
[ 2.745] (==) Automatically enabling devices
[ 2.745] (==) Automatically adding GPU devices
[ 2.748] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 2.748] Entry deleted from font path.
[ 2.748] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 2.748] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2.748] Entry deleted from font path.
[ 2.752] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2.752] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2.752] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2.753] (II) Loader magic: 0x815d80
[ 2.753] (II) Module ABI versions:
[ 2.753] X.Org ANSI C Emulation: 0.4
[ 2.753] X.Org Video Driver: 19.0
[ 2.753] X.Org XInput driver : 21.0
[ 2.753] X.Org Server Extension : 9.0
[ 2.754] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 2.754] (--) PCI:*(0:1:0:0) 1002:6811:1458:226c rev 0, Mem @ 0xd0000000/268435456, 0xefe00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 2.754] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2.755] (II) LoadModule: "glx"
[ 2.755] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2.758] (II) Module glx: vendor="X.Org Foundation"
[ 2.758] compiled for 1.17.1, module version = 1.0.0
[ 2.758] ABI class: X.Org Server Extension, version 9.0
[ 2.758] (==) AIGLX enabled
[ 2.758] (==) Matched ati as autoconfigured driver 0
[ 2.758] (==) Matched modesetting as autoconfigured driver 1
[ 2.758] (==) Matched fbdev as autoconfigured driver 2
[ 2.758] (==) Matched vesa as autoconfigured driver 3
[ 2.758] (==) Assigned the driver to the xf86ConfigLayout
[ 2.758] (II) LoadModule: "ati"
[ 2.758] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 2.758] (II) Module ati: vendor="X.Org Foundation"
[ 2.758] compiled for 1.17.0, module version = 7.5.0
[ 2.758] Module class: X.Org Video Driver
[ 2.758] ABI class: X.Org Video Driver, version 19.0
[ 2.758] (II) LoadModule: "radeon"
[ 2.758] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 2.761] (II) Module radeon: vendor="X.Org Foundation"
[ 2.761] compiled for 1.17.0, module version = 7.5.0
[ 2.761] Module class: X.Org Video Driver
[ 2.761] ABI class: X.Org Video Driver, version 19.0
[ 2.761] (II) LoadModule: "modesetting"
[ 2.761] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 2.761] (II) Module modesetting: vendor="X.Org Foundation"
[ 2.761] compiled for 1.17.1, module version = 1.17.1
[ 2.761] Module class: X.Org Video Driver
[ 2.761] ABI class: X.Org Video Driver, version 19.0
[ 2.761] (II) LoadModule: "fbdev"
[ 2.761] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 2.762] (II) Module fbdev: vendor="X.Org Foundation"
[ 2.762] compiled for 1.17.0, module version = 0.4.4
[ 2.762] Module class: X.Org Video Driver
[ 2.762] ABI class: X.Org Video Driver, version 19.0
[ 2.762] (II) LoadModule: "vesa"
[ 2.762] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 2.762] (II) Module vesa: vendor="X.Org Foundation"
[ 2.762] compiled for 1.17.0, module version = 2.3.2
[ 2.762] Module class: X.Org Video Driver
[ 2.762] ABI class: X.Org Video Driver, version 19.0
[ 2.762] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS, MULLINS,
MULLINS, MULLINS, MULLINS, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII
[ 2.776] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 2.776] (II) FBDEV: driver for framebuffer: fbdev
[ 2.776] (II) VESA: driver for VESA chipsets: vesa
[ 2.776] (++) using VT number 1
[ 2.776] (II) [KMS] drm report modesetting isn't supported.
[ 2.776] (EE) open /dev/dri/card0: No such file or directory
[ 2.776] (WW) Falling back to old probe method for modesetting
[ 2.776] (EE) open /dev/dri/card0: No such file or directory
[ 2.776] (II) Loading sub module "fbdevhw"
[ 2.776] (II) LoadModule: "fbdevhw"
[ 2.776] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 2.777] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 2.777] compiled for 1.17.1, module version = 0.0.2
[ 2.777] ABI class: X.Org Video Driver, version 19.0
[ 2.777] (**) FBDEV(2): claimed PCI slot 1@0:0:0
[ 2.777] (II) FBDEV(2): using default device
[ 2.777] (WW) Falling back to old probe method for vesa
[ 2.777] (EE) Screen 0 deleted because of no matching config section.
[ 2.777] (II) UnloadModule: "radeon"
[ 2.777] (EE) Screen 0 deleted because of no matching config section.
[ 2.777] (II) UnloadModule: "modesetting"
[ 2.777] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2.777] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 2.777] (==) FBDEV(0): RGB weight 888
[ 2.777] (==) FBDEV(0): Default visual is TrueColor
[ 2.777] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2.777] (II) FBDEV(0): hardware: EFI VGA (video memory: 3072kB)
[ 2.777] (II) FBDEV(0): checking modes against framebuffer device...
[ 2.777] (II) FBDEV(0): checking modes against monitor...
[ 2.777] (--) FBDEV(0): Virtual size is 1024x768 (pitch 1024)
[ 2.777] (**) FBDEV(0): Built-in mode "current": 78.7 MHz, 59.9 kHz, 75.7 Hz
[ 2.777] (II) FBDEV(0): Modeline "current"x0.0 78.65 1024 1056 1184 1312 768 772 776 792 -hsync -vsync -csync (59.9 kHz b)
[ 2.777] (==) FBDEV(0): DPI set to (96, 96)
[ 2.777] (II) Loading sub module "fb"
[ 2.777] (II) LoadModule: "fb"
[ 2.777] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2.778] (II) Module fb: vendor="X.Org Foundation"
[ 2.778] compiled for 1.17.1, module version = 1.0.0
[ 2.778] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2.778] (**) FBDEV(0): using shadow framebuffer
[ 2.778] (II) Loading sub module "shadow"
[ 2.778] (II) LoadModule: "shadow"
[ 2.778] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 2.779] (II) Module shadow: vendor="X.Org Foundation"
[ 2.779] compiled for 1.17.1, module version = 1.1.0
[ 2.779] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2.779] (II) UnloadModule: "vesa"
[ 2.779] (II) Unloading vesa
[ 2.779] (==) Depth 24 pixmap format is 32 bpp
[ 2.779] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 2.781] (==) FBDEV(0): Backing store enabled
[ 2.782] (==) FBDEV(0): DPMS enabled
[ 2.782] (==) RandR enabled
[ 2.786] (II) AIGLX: Screen 0 is not DRI2 capable
[ 2.786] (EE) AIGLX: reverting to software rendering
[ 2.874] (II) AIGLX: Loaded and initialized swrast
[ 2.874] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 2.932] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2.932] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2.932] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 2.932] (II) LoadModule: "libinput"
[ 2.932] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 2.933] (II) Module libinput: vendor="X.Org Foundation"
[ 2.933] compiled for 1.17.1, module version = 0.9.0
[ 2.933] Module class: X.Org XInput Driver
[ 2.933] ABI class: X.Org XInput driver, version 21.0
[ 2.933] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 14 paused 0
[ 2.933] (II) Using input driver 'libinput' for 'Power Button'
[ 2.933] (**) Power Button: always reports core events
[ 2.933] (**) Option "Device" "/dev/input/event2"
[ 2.934] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 2.934] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 2.934] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event2"
[ 2.934] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2.934] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 2.934] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 2.934] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 2.934] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2.934] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 2.934] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 17 paused 0
[ 2.934] (II) Using input driver 'libinput' for 'Power Button'
[ 2.934] (**) Power Button: always reports core events
[ 2.934] (**) Option "Device" "/dev/input/event0"
[ 2.934] (II) input device 'Power Button', /dev/input/event0 is tagged by udev as: Keyboard
[ 2.934] (II) input device 'Power Button', /dev/input/event0 is a keyboard
[ 2.934] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event0"
[ 2.934] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2.935] (II) input device 'Power Button', /dev/input/event0 is tagged by udev as: Keyboard
[ 2.935] (II) input device 'Power Button', /dev/input/event0 is a keyboard
[ 2.935] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 2.935] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 2.935] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 2.935] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 18 paused 0
[ 2.935] (II) Using input driver 'libinput' for 'Sleep Button'
[ 2.935] (**) Sleep Button: always reports core events
[ 2.935] (**) Option "Device" "/dev/input/event1"
[ 2.935] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 2.935] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[ 2.935] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event1"
[ 2.935] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 2.935] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[ 2.935] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[ 2.935] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event7)
[ 2.935] (II) No input driver specified, ignoring this device.
[ 2.935] (II) This device may have been added with another device file.
[ 2.936] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event8)
[ 2.936] (II) No input driver specified, ignoring this device.
[ 2.936] (II) This device may have been added with another device file.
[ 2.936] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event9)
[ 2.936] (II) No input driver specified, ignoring this device.
[ 2.936] (II) This device may have been added with another device file.
[ 2.936] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event12)
[ 2.936] (II) No input driver specified, ignoring this device.
[ 2.936] (II) This device may have been added with another device file.
[ 2.936] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event5)
[ 2.936] (II) No input driver specified, ignoring this device.
[ 2.936] (II) This device may have been added with another device file.
[ 2.936] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event6)
[ 2.936] (II) No input driver specified, ignoring this device.
[ 2.936] (II) This device may have been added with another device file.
[ 2.936] (II) config/udev: Adding input device LOGITECH G110 G-keys (/dev/input/event4)
[ 2.936] (**) LOGITECH G110 G-keys: Applying InputClass "evdev keyboard catchall"
[ 2.936] (**) LOGITECH G110 G-keys: Applying InputClass "libinput keyboard catchall"
[ 2.936] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 19 paused 0
[ 2.936] (II) Using input driver 'libinput' for 'LOGITECH G110 G-keys'
[ 2.936] (**) LOGITECH G110 G-keys: always reports core events
[ 2.936] (**) Option "Device" "/dev/input/event4"
[ 2.937] (II) input device 'LOGITECH G110 G-keys', /dev/input/event4 is tagged by udev as: Keyboard
[ 2.937] (II) input device 'LOGITECH G110 G-keys', /dev/input/event4 is a keyboard
[ 2.937] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11.1/3-11.1:1.0/0003:046D:C22B.0001/input/input7/event4"
[ 2.937] (II) XINPUT: Adding extended input device "LOGITECH G110 G-keys" (type: KEYBOARD, id 9)
[ 2.937] (II) input device 'LOGITECH G110 G-keys', /dev/input/event4 is tagged by udev as: Keyboard
[ 2.937] (II) input device 'LOGITECH G110 G-keys', /dev/input/event4 is a keyboard
[ 2.937] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event10)
[ 2.937] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
[ 2.937] (**) Gaming Keyboard G110: Applying InputClass "libinput keyboard catchall"
[ 2.937] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 20 paused 0
[ 2.937] (II) Using input driver 'libinput' for 'Gaming Keyboard G110'
[ 2.937] (**) Gaming Keyboard G110: always reports core events
[ 2.937] (**) Option "Device" "/dev/input/event10"
[ 2.937] (II) input device 'Gaming Keyboard G110', /dev/input/event10 is tagged by udev as: Keyboard
[ 2.937] (II) input device 'Gaming Keyboard G110', /dev/input/event10 is a keyboard
[ 2.937] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11.3/3-11.3:1.0/0003:046D:C22A.0002/input/input22/event10"
[ 2.937] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 10)
[ 2.938] (II) input device 'Gaming Keyboard G110', /dev/input/event10 is tagged by udev as: Keyboard
[ 2.938] (II) input device 'Gaming Keyboard G110', /dev/input/event10 is a keyboard
[ 2.938] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event20)
[ 2.938] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
[ 2.938] (**) Gaming Keyboard G110: Applying InputClass "libinput keyboard catchall"
[ 2.938] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 21 paused 0
[ 2.938] (II) Using input driver 'libinput' for 'Gaming Keyboard G110'
[ 2.938] (**) Gaming Keyboard G110: always reports core events
[ 2.938] (**) Option "Device" "/dev/input/event20"
[ 2.938] (II) input device 'Gaming Keyboard G110', /dev/input/event20 is tagged by udev as: Keyboard
[ 2.938] (II) input device 'Gaming Keyboard G110', /dev/input/event20 is a keyboard
[ 2.938] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11.3/3-11.3:1.1/0003:046D:C22A.0003/input/input23/event20"
[ 2.938] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 11)
[ 2.938] (II) input device 'Gaming Keyboard G110', /dev/input/event20 is tagged by udev as: Keyboard
[ 2.938] (II) input device 'Gaming Keyboard G110', /dev/input/event20 is a keyboard
[ 2.939] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event21)
[ 2.939] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 2.939] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[ 2.990] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 22 paused 0
[ 2.990] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 2.990] (**) Logitech USB Receiver: always reports core events
[ 2.990] (**) Option "Device" "/dev/input/event21"
[ 2.990] (II) input device 'Logitech USB Receiver', /dev/input/event21 is tagged by udev as: Mouse
[ 2.990] (II) input device 'Logitech USB Receiver', /dev/input/event21 is a pointer caps
[ 2.990] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11.4/3-11.4:1.0/0003:046D:C52F.0004/input/input24/event21"
[ 2.990] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 12)
[ 2.990] (**) Option "AccelerationScheme" "none"
[ 2.990] (**) Logitech USB Receiver: (accel) selected scheme none/0
[ 2.990] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 2.990] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 2.990] (II) input device 'Logitech USB Receiver', /dev/input/event21 is tagged by udev as: Mouse
[ 2.990] (II) input device 'Logitech USB Receiver', /dev/input/event21 is a pointer caps
[ 2.990] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 2.990] (II) No input driver specified, ignoring this device.
[ 2.990] (II) This device may have been added with another device file.
[ 2.990] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event22)
[ 2.990] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 2.990] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 2.991] (II) systemd-logind: got fd for /dev/input/event22 13:86 fd 23 paused 0
[ 2.991] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 2.991] (**) Logitech USB Receiver: always reports core events
[ 2.991] (**) Option "Device" "/dev/input/event22"
[ 2.991] (II) input device 'Logitech USB Receiver', /dev/input/event22 is tagged by udev as: Keyboard
[ 2.991] (II) input device 'Logitech USB Receiver', /dev/input/event22 is a keyboard
[ 2.991] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-11/3-11.4/3-11.4:1.1/0003:046D:C52F.0005/input/input25/event22"
[ 2.991] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 13)
[ 2.991] (**) Option "AccelerationScheme" "none"
[ 2.991] (**) Logitech USB Receiver: (accel) selected scheme none/0
[ 2.991] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 2.991] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 2.991] (II) input device 'Logitech USB Receiver', /dev/input/event22 is tagged by udev as: Keyboard
[ 2.991] (II) input device 'Logitech USB Receiver', /dev/input/event22 is a keyboard
[ 2.991] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[ 2.991] (II) No input driver specified, ignoring this device.
[ 2.991] (II) This device may have been added with another device file.
[ 2.992] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event13)
[ 2.992] (II) No input driver specified, ignoring this device.
[ 2.992] (II) This device may have been added with another device file.
[ 2.992] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event14)
[ 2.992] (II) No input driver specified, ignoring this device.
[ 2.992] (II) This device may have been added with another device file.
[ 2.992] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event15)
[ 2.992] (II) No input driver specified, ignoring this device.
[ 2.992] (II) This device may have been added with another device file.
[ 2.992] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event16)
[ 2.992] (II) No input driver specified, ignoring this device.
[ 2.992] (II) This device may have been added with another device file.
[ 2.992] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event17)
[ 2.992] (II) No input driver specified, ignoring this device.
[ 2.992] (II) This device may have been added with another device file.
[ 2.992] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event18)
[ 2.992] (II) No input driver specified, ignoring this device.
[ 2.992] (II) This device may have been added with another device file.
[ 2.992] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event19)
[ 2.992] (II) No input driver specified, ignoring this device.
[ 2.992] (II) This device may have been added with another device file.
[ 2.992] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 2.992] (II) No input driver specified, ignoring this device.
[ 2.992] (II) This device may have been added with another device file.
[ 2.993] (EE) FBDEV(0): FBIOBLANK: Invalid argument
Output of lshw -c video:
*-display
description: VGA compatible controller
product: Curacao PRO [Radeon R9 270]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0
bus info: pci@0000:01:00.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
resources: irq:29 memory:d0000000-dfffffff memory:efe00000-efe3ffff ioport:e000(size=256) memory:efe40000-efe5ffff
And the output of systemctl status gdm:
● gdm.service - GNOME Display Manager
Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled; vendor preset: disabled)
Active: active (running) since Wed 2015-04-29 03:30:42 AEST; 15min ago
Main PID: 289 (gdm)
CGroup: /system.slice/gdm.service
└─289 /usr/bin/gdm
Apr 29 03:30:42 spitfire systemd[1]: Starting GNOME Display Manager...
Apr 29 03:30:42 spitfire systemd[1]: Started GNOME Display Manager.
Apr 29 03:30:45 spitfire gdm[289]: GdmDisplay: display lasted 2.980133 seconds
Apr 29 03:30:45 spitfire gdm[289]: Child process -311 was already dead.
Apr 29 03:30:45 spitfire gdm[289]: Child process 303 was already dead.
Apr 29 03:30:45 spitfire gdm[289]: Unable to kill session worker process
Apr 29 03:30:45 spitfire gdm[289]: Child process 303 was already dead.
Apr 29 03:30:45 spitfire gdm[289]: Unable to kill session worker process
I don't know where the GDM logs are located, as the /var/log/gdm folder is empty. Newbie problems.
If there are other logs that would help, please tell me and I'll add them. Thanks.
Last edited by The6P4C (2015-04-28 09:53:14)

The first is the audio codec, which is WM Std at 44.1kHz. WVP2 is the video codec and I have not heard of it. Nor seen it playback in QT assisted by Flip4mac so it may be unplayable.
There are always listed one audio codec and one video codec in that box assuming there are audio and video in the clip, e.g. AAC 256 bit (audio) and H264 Simple Profile (video) in an iPod clip.
Ooh bad news, from another source:
+"It seems that the Flip4Mac WMV Player, which should provide the missing Windows Media support for Mac users (as endorsed by Microsoft) does not support all Windows Media codecs, namely *it refuses to play content encoded with the Windows Media Video 9 Image v2 (WVP2) codec.* "+

Satellite L300 - Black screen and flashing cursor in top left corner

11 July 2010
My computer bought 7 March 2009.
I am not sure if there is a voltage issue, but there is certainly a heat issue and has been since I bought it, almost constantly overheating. For circa 2 months it has become increasingly slower to load to desktop. For circa 1 month the operating system became stuck in a reboot cycle - rebooting over and over instead of starting up normally.
On 11 July 2010, the Windows XP operating system would not boot. Switched on to black screen, flashing cursor in top left corner. The computer does not have a Windows Startup Disk and will not boot into: -
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration (most recent settings that worked)
Start Windows Normally
System Restore - will not provide access.
Recovery Console - the Windows XP CD will boot and provided access to the tool called Recovery Console. Procedures carried out: -
Fix a corrupt Boot.ini - YES
Fix a corrupt partition boot sector - YES
Fix a corrupt master boot record - NO
I have pressed F2, F8, F10 and F12.

Hello
It seems that something has muddled up your Windows installation and so the computer cant boot anymore.
In this case you have only one option and thats reinstalling Windows. Therefore you can take a Microsoft Windows XP disk or (better) Toshiba recovery disk. It will restore factory settings and your computer is read to use again.
Check this!!!

Pavilion Dv5-1009el - Black screen and blink caps lock and block scorr

Hi,
I just replaced the motherboard of my pavilion that reported an error as object. The purchased motherboard is new and hp original.
After having changed, I turn on the pc and work fine, i see the hp logo and enter to bios, after I turned off the pc without starting windows.
I inserted the battery and powered on the pc and returns to the old error, the LED of caps lock and block Lock blinks...
So I tried to update the bios from USB using winkey + B. The computer emits two beeps but does not read from any USB port and the LEDs go out for a while and then blink again.
What can I do?
Greetings,
Enzo.

Hi @shmurray,
Welcome to the HP Support Forums!
I understand you are getting a blink pattern on the Caps lock LED, when you turn on the notebook. I am happy to help you with this.
I am including the page on the error codes for your reference: Blank Screen LED Error Codes
From that document the pattern you are getting indicates a memory problem. You said that you have tested the memory. What exactly did you try?
The document suggests reseating the RAM or trying a new set of RAM and then restarting the notebook. If you are still getting a memory problem after trying both of those things, ie a 3 blink code again, then it would likely suggest that there is a problem with the motherboard itself, either with the memory slot or one of the controllers related to memory.
In that case I would suggest contacting the technical phone support number at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
If however reseating the memory or replacing it leads to a different error code or message please let me know, Although in that case the following may be helpful if you still have a blank screen.
Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot
Here are some other sources I found that may be helpful to you.
Resolving Problems with Notebook Displays (Windows 7 and Windows 8)
I hope that this is helpful to you.
Regards,
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Windows 8.1 black screen with mouse cursor after login (HP 2730P)

I live in Canada and first just to confirm that Windows 8 with all Microsoft patches was running ok on my HP EliteBook 2730P NoteBook PC. Originally I had Windows XP running in it. With Win 8, I just lost few unique HP
applications.
But last night, just after my upgrade to Windows 8.1, I had the blank screen problem after the login, as you already described. I went to HP and Intel web sites for some help and fixes but nothing really helpful. According
to what I red, it's always someone else responsability but not their's or the easy way to get out of it, not supported on Windows 8 and above. But as my (not so old) HP 2730P is a NoteBook PC that I am used to work with, I
did a lot of researches to make it work fine with Win 8 and now with 8.1 .
So, after many hours on Internet I finally corrected my problem the same way as ghoust1101 showed previously; with the Info and instructions on youtube.com/watch?v=Rgje-t0OLdI
After the sfc /scannow , I got a message saying that many errors and corrupted files were fixed, plus as showed, I deleted "c:\Windows Activation Technologies", which corrected my problem. Done a reboot and everything was fine after
showing me the correct Windows 8.1 screen and the rest is to get familiar with it.
Hope this could help...

Hi,
Actually, I'm not sure what your exactlly problem it is, what's you meaning of Black Screen? All the screen black or just background? While Glad to see your problem resolved, Hope your experience is helpful with others.
Roger Lu
TechNet Community Support

My HP Pavillion dv4 has a black screen and blinking Caps and Num lock

BEFORE anyone says to take out everything and press the start button for however many seconds, i've tried that. I've also tryed counting blinks, but there seems to be no pause in blinks, thus continuous blinking.
SO, recently i have updated my laptop, i let it shut off but i did not choose for it to restart. Today when i tried to turn it on, the screen was black, did not turn on and the caps lock and the num lock have been blinking continuosly, without pattern. The touch screen volume and such is also on and after a few seconds the fan turns on. There is no loud beep, just the regular startup soft beep. So, i would like to know, if anyone knows what i can do, before i have to go and pay to fix this thing.

i have took it to the apple store, i am out of warranty and they said it is a hardware problem, god knows whats causing the black screen it is fine when on as i got it fixed at a local phone shop but when the phone dies then there is no bringing it back to life.

Windows 7 64-bit black screen and blinking cursor for ages before boot

Similar Messages

Maybe you are looking for