Windows 7 64-bit cannot detect iphone4s ios7

I can't find the answer why my iphone 4s got stuck in recovery mode. I think the only thing to fix this is thru iTunes but my PC can't detect it. My iphone 3g and  4 can detect but the 4s can't? I already checked the device manager but the apple mobile device driver doesn't show up for iphone 4s. I reinstall iTunes for how many times but still no luck.
I am using hp pavilion dv3 with win7 64-bit.
Please help!! I need it badly!

The following may help: iOS: Device not recognized in iTunes for Windows
Note that in the section regarding the mobile device driver it instructs to remove 4 applications:
If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes.
and it gives a link to the following instructions: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Similar Messages

  • Windows 64 bit cannot be installed

    I Have MacBook Pro Retina display 13 inch dual-core i5 2.4GHz 8GB 256GB, When i'm installing windows 7 on Bootcamp show message error windows 64 bit cannot be installed i need to advise me a solution to this case ???? Mac OSX 10.9.1

    Win 7 and 8 require a min of 20Gb but this assumes a minimum install and no other software.
    If youre looking at adding other stuff then you need to increase it.
    When you say youve selected a private space did you follow the correct proceedure to install by using the bootcamp assistant. Think about file format for the drive before you start as you have a couple of options.
    NTFS are what is normally required by Windows but this will prevent you copying files too/from OSX
    FAT will allow you to copy files between windows OSX
    From memory I used FAT and then OSX/Windows converted it to NTFS during the process so I dont think you can ultimately use the drive from OSX unless you use a Virtual set up.
    You may have set the drive up wrong ie set it up for 32bit or a wrong format for the 64bit windows system to use
    Have a look at these links:
    http://www.wikihow.com/Use-Boot-Camp
    http://twocanoes.com/winclone/support/create-a-boot-camp-partition

  • Finder cannot detect iphone4 files

    why FINDER cannot read my iphone4 as an external drive when plugged into the USB port?
    on the contrary, I've no issue reading my iphone from a Dell pc and I can copy/delete files easily!
    any help please!

    Yes. I have the component installed. I have no trouble viewing the files in Quicktime or rendering as ProRes from applications such as Adobe After Effects. I just cannot preview the files with the built in finder preview.

  • Elements 13 for Windows 64-bit - cannot enter Expert mode

    Hi,
    I just created a photo collage but I am not able to enter expert mode to display rulers or do other advanced things.
    Any help would be appreciated.
    Thanks

    Here it is. You can try free for 30 days before buying.
    https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&PID=2159997 #

  • Windows 8 and iTunes cannot detect iPhone

    Hi, I am using Windows 8 and iPhone 4S. Recently both Windows and iTunes cannot detect my iPhone. I have tried uninstalling and reinstalling the latest iTunes and related software, but no use. I tried follow this article http://support.apple.com/kb/TS1538 , but in doing the step "If the Apple Mobile Device USB Driver is not listed", replugging the device, I still can't find Apple iPhone in Device Manager.

    Hi, I have run the diagnostics and this is the result.
    Microsoft Windows 8 x64 Business Edition (Build 9200)
    Hewlett-Packard HP Pavilion g4 Notebook PC
    iTunes 11.0.2.26
    QuickTime not available
    FairPlay 2.3.31
    Apple Application Support 2.3.3
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0116B83009FC5BA0
    Current user is not an administrator.
    The current local date and time is 2013-03-19 21:29:56.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 102972d87e159603ee6a64fcec3e408b
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {B17D9219-7E1D-40CE-BAC6-420714253A52}
    Description:          Bluetooth Device (Personal Area Network)
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Thu Jan 01 08:00:00 1970
    Lease Expires:          Thu Jan 01 08:00:00 1970
    DNS Servers:
    Adapter Name:          {66304A8E-7EBA-4CAA-B2BF-A8AEF04C5A68}
    Description:          Microsoft Wi-Fi Direct Virtual Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Thu Jan 01 08:00:00 1970
    Lease Expires:          Thu Jan 01 08:00:00 1970
    DNS Servers:
    Adapter Name:          {43659E23-A7AF-4613-BF73-52663D28FCA9}
    Description:          Qualcomm Atheros AR9485 802.11b/g/n WiFi Adapter
    IP Address:          192.168.1.3
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.1.1
    DHCP Enabled:          Yes
    DHCP Server:          192.168.1.1
    Lease Obtained:          Tue Mar 19 20:53:56 2013
    Lease Expires:          Wed Mar 20 20:53:56 2013
    DNS Servers:          192.168.1.1
    Adapter Name:          {CDCA5430-75A2-4270-B5C3-181137F729B5}
    Description:          Realtek PCIe FE Family Controller
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Thu Jan 01 08:00:00 1970
    Lease Expires:          Thu Jan 01 08:00:00 1970
    DNS Servers:
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2013-03-19 21:23:25.
    **** Device Connectivity Tests ****
    iPodService 11.0.2.26 (x64) is currently running.
    iTunesHelper 11.0.2.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    No Universal Serial Bus Controller found.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPhone 4S running firmware version 6.1
    Serial Number:          C39H7QQMDTD7
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

  • Windows 8.1 cannot "see" NAS under Network in MyPC

    So we purchased and set up a NAS recently.  It works perfectly and is UNIX based and has SAMBA enabled.  So here's the kicker:
    * Windows 7, No issues - NAS pops up under Network automatically. 
    * Windows 8.1, It never pops up under Network
    Windows 8.1 Troubleshooting
    * No Issues for pinging the IP address for the NAS
    * No issues for pinging the server name for the NAS
    * Turned off the Windows Firewall - Still cannot detect the NAS
    * Using the Control Center software for the NAS, it can detect the NAS by IP and server name.  Also via the Control Center (which is an administrative console) I can log in so its not a credential issue)
    * Flushed and re-registered DNS, no effect
    * Both computers are in WORKGROUP
    * Both computers are set for NetBIOS over TCP/IP. 
    NOTE: I'm using Windows 8.1 Home so I can't access local policies or connect to a Domain (even if I had one)
    There's probably something in Windows 8.1 that I'm missing but I'm just banging my head here.  Help!

    Hi there so I've taken a look:
    * When I open a command window, I can ping the IP and the computer name of the NAS
    * But when I look through a browser\windows explorer\My Computer and punch in an IP or computer name, it can't connect to it.
    * Nor does it show up under Network (Places)
    After checking
    * Network Discovery is ON
    * File and printer sharing is ON
    * I've updated the network wireless driver in Windows 8.1 as well - No effect
    I know its not a firewall issue as I temporarily disabled the Windows firewall - no effect.  Its not a routing issue since I can ping the NAS from a command windows and my Win 7 box is on the same network as the 8.1 box
    Is there some Windows service that is required somewhere?

  • Cannot detect X-fi XtremeMu

    I try to install my X-fi XtremeMusic on my WinXp. However each time the window startup it cannot detect my sound card. i had tried switching to another PCI port however the problem still exist. Is it something wrong with the sound card??

    http://audigy2zshowto.blogspot.com/

  • TS1538 Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows.

    Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsoft teredo Tunneling adapter" has a yellow exclamation mark, which i believe means it's not installed correctly or something is wrong with it. This driver is under the Network Adapters (Please see picture below).
    This is what happens when I connect my iPhone 4s to my laptop (Windows 7 Starter 32-bit)
    1. The phone charges it's battery
    2. I can open it in My Computer and import/export media files.
    In iTunes
    3. It start to sync until step 3 then stops.
    4. The iPhone option with an arrow appears beside the iTunes Store, but when the arrow is clicked it disappears.
    I hope you can provide me a solution for this problem.
    Thanks,
    Ralph

    Hi ralphagir,
    Welcome to the Apple Support Communities!
    For your iTunes issue with it not recognizing your iPhone, I would go ahead and suggest deleting iTunes and all of its components from your Windows computer and installing fresh.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Remove iTunes and related components from the Control Panel
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    As far as the arrow button that you click and the iPhone disappears, it sounds like you may be clicking on the eject button. Please take a look at the following article for information on the eject button in iTunes.
    Safely disconnect iPod
    http://support.apple.com/kb/HT1853
    Have a great day,
    Joe

  • USB Wifi Zyxel NWD-210N cannot detect wifi 2 router connection on Windows 8.1 Pro

    Hi,
    I am currently running a Windows 8.1 Pro with current up-to-date patches.
    I am having issues connecting to the wifi router with my USB Zyxel NWD-210N wifi adapter.
    I turned off the built-in wifi card in the laptop.
    And turned on the second USB Zyxel NWD-210N wifi adapter.
    Windows 8.1 detects it as Wifi 2.
    Even though I was sitting right in front the router, Windows 8.1 cannot seems to find the router.

    MrDB
    Again, it is up to zyxel to update the driver not Microsoft.  Microsoft doesn't make the OS compatible with every device, every device needs to make their hardware work with the OS.  IMHO if there isnt a current Microsoft driver there is not likely
    to be one.  Contact Zyxel
    You might want to try installing the driver in compatibility mode (try win 7)
    To install in compatibility mode do the following:
    Right click the installer>properties>compatibility>choose OS
    http://windows.microsoft.com/en-US/windows-vista/Make-older-programs-run-in-this-version-of-Windows?SignedIn=1
    Wanikiya and Dyami--Team Zigzag

  • Camera Window pops the message "Cannot detect Camera, Check connection to camera, then retry"

    I have installed Camera Window in my Windows 8.1 laptop. The moment I invoke Camera window, there is a popup which shows . "Cannot detect Camera, Check connection to camera, then retry. I do not have this issue in my iPAD though. Has anyone come across this issue..?Thanks

    zebah_alfred,
    Please make sure you have the latest versions of the software installed by downloading them from our website.  Please click HERE to go to the download page.
     1.  Are you connecting to your computer with a USB cable or over Wi-Fi?
     2.  Are there any other devices connected to your computer other than the camera, aside from a keyboard and mouse of course?
    If this is a time sensitive-matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth

    I install windows 8 in my macbook pro, the problem is it cannot detect wifi connection and bluetooth, because when i click the wireless in settings there are no choices... but when i use the mac os, everything is fine, the wifi, the bluetooth everything is functional, can you help me fix this problem? help will be much appreaciated.. thanks

    How did you install Windows? Did you use Bootcamp Assistant or did you use a virtual machine like Parallels, Fusion, or VirtualBox.
    If you used Bootcamp Assistant, did you download and install the Windows Support software (drivers) in accordance with the Bootcamp instructions?

  • I install windows 8 but message said cannot detect bootable disc?

    Hi I am trying to install windows 8 on my mac air but when im done with partioning it cannot detect my bootable device which i have created from bootcamp on my usb drive. Now i'm stuck with the message "Insert Bootable Device and press any key to continue".. I trying turning it off but when i put it on it's still the same message i am receiving. Please If anybody could help how can i cancel the installation since it doesn't read my usb drive.

    Hi, hold alt key at bootup, or CMD+r keys at bootup.

  • Since iOS7 on iPad2. Updates in App store cannot detect any updates.

    Since iOS7 on iPad2. Updates in App store cannot detect any updates so i restart an iPad then it can detect many updates. After use for a few days it happens again.

    Unable to connect to iTune Store:
    1. Make sure internet is working
    2. Make sure iPad is using the latest software
    3. Settings>General>Date and Time>Set Automatically>On
    4. Make sure Time Zone is correct
    5. Try restart iPad

  • The iTune cannot detect my iPhone. I have already tried all methods suggested, including re-installling iTune, re-activating Apple Mobile Device, plugging in various USB ports, and etc. I use windows 7. How can I solve this?

    The iTune cannot detect my iPhone 4S. I have already tried all methods suggested, including re-installling iTune, re-activating Apple Mobile Device, plugging in various USB ports, and etc. I use windows 7. How can I solve this?

    The new cable is completely new, and my computer can detect the phone as a drive, and battery charging is ok. So I believe the USB cable works properly. It is so weird that just iTune itself cannot detect the phone, and it is of the most updated version. What else can I do? Thanks.

  • Itunes cannot detect Outlook contact, etc, on Windows 8.1

    iTunes cannot detect Outlook contact, etc, on Windows 8.1

    Found solution on web : uninstall iTunes & all Apple-related apps, delete all Apple-designated folders from <user>/AppData/..., restart PC, download & reinstall iTunes, finish installation without starting iTunes, restart PC, run iTunes and connect iPhone to PC. Sync starts and Outlook can be found under the Info section. Contacts sync-ed without problem. Calendar refuses to sync. Still searching for solution to this remaining problem.

Maybe you are looking for

  • Is it possible to install a SSD in a MacBook?

    Is it possible to install a SSD in a MacBook? Saw some posts on google re: a Pro, but I use a MacBook for live performance and could really use the reliability of a SSD. Where to purchase, and how easy is an install?

  • SMB Newbie: Accessing Linux Share

    I have my /etc/samba/smb.conf set up like so: # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options (perhaps too #

  • Failure to start agent for oracle 10g in window

    Hi Experts, I am using oracle 10G R4 in 32 bit window 2003. I saw agent stop in EM. I just restart dbconsole form window side. Now I saw that emgent with DBSNMP takes hight CPU (20-40%) I try to stop and restart dbconsole does not fix this issue. I j

  • Lost mozilla symbol on startup.Can'tgo to website. HELP

    the symbol on the startup,that you click to go to the website is suddenly gone and I can't figure out how to get the symbol back.Thanks for any help

  • Something is wrong with Firefox's image auto resize

    In forums, when I post an image, it's seems to be doing an incorrect image auto resize, for the image is still large to be fit in the websites' pages, and when I CTRL+Scroll, the browser makes a proper resize though making the letters and numbers sma