Windows 7 64 bit cannot wakeup

Just setup the windows 7 64 bit with bootcamp on my mac mini. Updated to the latest bootcamp 3.1 64 bit as well. I set the configuration so when I press the button on the back of my mac mini, it should go hibernate. But I found out that I am not able to wake it up. I was able to do it when I was using windows 7 32 bit.

Hibernate can be touchy / iffy and it may be there is no way; or there is something else that is affecting sleep, reduced power management etc.
Have you gone into and tried tweaking the Power Options?

Similar Messages

  • Windows 64 bit cannot be installed

    I Have MacBook Pro Retina display 13 inch dual-core i5 2.4GHz 8GB 256GB, When i'm installing windows 7 on Bootcamp show message error windows 64 bit cannot be installed i need to advise me a solution to this case ???? Mac OSX 10.9.1

    Win 7 and 8 require a min of 20Gb but this assumes a minimum install and no other software.
    If youre looking at adding other stuff then you need to increase it.
    When you say youve selected a private space did you follow the correct proceedure to install by using the bootcamp assistant. Think about file format for the drive before you start as you have a couple of options.
    NTFS are what is normally required by Windows but this will prevent you copying files too/from OSX
    FAT will allow you to copy files between windows OSX
    From memory I used FAT and then OSX/Windows converted it to NTFS during the process so I dont think you can ultimately use the drive from OSX unless you use a Virtual set up.
    You may have set the drive up wrong ie set it up for 32bit or a wrong format for the 64bit windows system to use
    Have a look at these links:
    http://www.wikihow.com/Use-Boot-Camp
    http://twocanoes.com/winclone/support/create-a-boot-camp-partition

  • Windows update cannot run because service is not working.

    Thinkpad E545, Windows 7 (64 bit) Professional.  When I attempt to run Windows Update I get the message "Windows update cannot currently check for updates because the service is not working."  Microsoft Fix-It does not help.  I found a YouTube posted by Richard Lloyd and followed the steps:  the Windows Update service is running, the Background service is running.  Several web sources including Microsoft point to an Intel RST driver.  I downloaded this driver g1io15ww.exe and ran the file, but still no joy.  A solution would be welcome, and Happy Thanksgiving.  --  Alan

    Hello and welcome,
    Your laptop is AMD-based (IIRC) so an Intel driver isn't going to help.
    If the update issue is caused by the AHCI driver incorrectly reporting physical sector size (that's what those IRST reports are about) it might be fixed by installing the correct  AHCI driver for your laptop:
    http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-edge-laptops/thinkpad-edge-e5...
    There are other reasons for Win update failures, so this isn't a sure thing. Worth a try, maybe. I've personally only seen this issue with Intel hardware.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • I have itunes in windows xp, but my ipod touch has updated version of itunes. Windows xp cannot get updated itunes. I am having difficulties transferring my music into my computer. Does any one have an idea how to do it?

    I have itunes in windows xp, but my ipod touch has updated version of itunes. Windows xp cannot get updated itunes. I am having difficulties transferring my music into my computer. Does any one have an idea how to do it?

    iTunes 11 is compatible with
    Windows System Requirements
    PC with a 1GHz Intel or AMD processor and 512MB of RAM
    Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
    Try:
    Trouble installing iTunes or QuickTime for Windows

  • Where can i find the build 10041 as windows update cannot find it?

    Hi all. I have an Acer Aspire E1-531 and am running Windows 10 Technical Preview on a 64-bit system. I am stuck on build 9926 and on the fast option for downloads in Windows Update yet I have not been offered the build 10041. Or that Windows Update cannot
    find build 10041. Where can I go to download and install the build myself? Thank you in advance.

    Hi,
    If you need
    Additional Languages for Windows 10 build 10041 - ESD - ISO
    http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/additional-languages-for-windows-10-build-10041/c26555a2-6e0e-415b-b47b-0c46e60f7f06
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Windows Defender cannot open

    Hello,
    I've got a question about Windows defender: I have a brand new Thinkpad T440S (Windows 8.1 Pro) and
    Windows Defender cannot open. There is a message saying: “This app has been turned off and isn’t monitoring your computer”. Impossible to turn it on”. When I try to launch it (R+service.mcs + windows defender), I still have this message: “Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.”
    What should I do about this issue?
    Thanks a lot for your answers/advice.
    Solved!
    Go to Solution.

    Hello,
    For Windows 8 (and later), Microsoft renamed its Microsoft Security Essentials anti-malware software to Windows Defender.  Which can be a bit confusing since Windows Defender was the name of the anti-spyware program Microsoft shipped for Windows 2000 through Windows 7, and worked alongside other anti-malware programs.
    Windows Defender (the version for Windows 8 and newer) is a full anti-malware program and cannot be run in combination with other anti-malware programs such as those from Kaspersky, McAfee, Symantec and so forth.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Time Capsule on Windows 7 : cannot connect to the hardrive

    Hello All,
    From sudden i cannot access to my Timecapsule Hardrive.
    Right now the issue are :
    I cant ping it (No answer)
    I can see it under Networks but cannot open it.
    I tried :
    To re install Airport utility and Bonjour
    Downgrade the firmware of the time capsule.
    Please find some screenshots of my network.
    Thanks for your help.

    Let's try the following document with that one.
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    (If the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.)

  • Photoshop CS v.8 open windows in Windows 7 cannot be moved, maximized, or closed

    I just installed my Photoshop CS Version 8 into Windows 7 on a new PC. When the program is opened, the File Browser icon does not toggle, and I have to go to File menu to open Browse. The browser window now cannot be moved, maximized, or closed. The same applies to any image that is opened. Notwithstanding, all the functions of Photoshop are working OK. Since Adobe no longer supports this version, I need solution advice from anyone.
    Al Phillips

    To All the Answers,
    I tried all that was suggested and none of them worked. I wish Adobe would come through with an answer!?
    Al Phillips

  • Windows Journal cannot open " ". An unexpected error occurred in Windows 7 Professional

    I copied my Windows Journal Notes from a tablet with Windows XP Tablet PC edition onto my Windows 7 Computer.  When I try to open a note from the pull down "look-in" menu within the Windows Journal program, I gives me the error
    "Windows Journal Cannot open.  An unexpected error occurred."  I thought this was a problem with my computer, BUT have replicated this same error on every computer in Best Buy and other computer stores.  This is not a problem with
    my personal notes.  This is a problem with the coding of the Windows Journal Software on Windows 7 and 8.  It was also tested on a Vista computer with the same error.
    Please, if someone knows how to fix this problem please let me know.  I use Windows Journal exclusively on a tablet PC for my business and am afraid of upgrading from XP to Windows 7 or 8 unless I can see that the Win7 version of JOURNAL works properly
    as the WinXP Tablet edition of Win Journal.
    Note: I have tried recreating user profiles, sfc.exe, cleanboot, safe mode, chkdisk.... all failed.  THE PROBLEM I BELIEVE IS THE ACTUAL CODE that is written for Windows Journal.  ALL notes can be opend by hitting FILE-OPEN.  However, if you
    go to the "view recent notes" button and click on the "look-in" pull down menu within the Windows Journal program, you can not open the file through this.  Because of the way I do my business, I need to look up various files quickly
    and write notes after opening each note from the "look-in" pull down menu.
    Please Help.

    The problem seems to be that the "look-in" menu doesn't open the files which are located in the "Notes" folder.  If I open the files through windows explorer in windows 7, the file opens into windows journal and appears in the look-in menu.
    Another interesting thing occurs if you create an additional folder under my documents.  I tested this on various computers in an electronic store:  Windows Journal was working fine with the "look-in" menu; I was able to open various journal note
    documents.  Then, once I created another folder under My Documents and tried to open a journal note in that folder and then go back to the "notes" folder, I was able to replicate the same error message.
    In short, it seems that once a new folder is created, the original folder "Notes" as well as the new folder, both do not allow for the files within them to be opened through the "look-in" menu.  However, they may be opened from hitting FILE, then OPEN. 
    But, the "look-in" and Browse menu doesn't work.
    Also, I looked in the Event Viewer and couldn't find anything in particular related to Win Journal.  Please tell me what and where specifically to look in the Event Viewer --- I can't seem to find anything related to Windows Journal errors in the Event
    Viewer.
    Thank you.

  • Windows update cannot currently check for updates

    dears
    when I Try to update my windows 7 by clicking on windows update ( control panel or windows update) I get some notification saying
    "windows update cannot currently check for updates because of the service is not running you may need to restart the computer"
    I have tried with 2 solution in internet found but not successeded as below :
    1) stop windows update service and rename " SoftwareDistribution" folder in order to be created later after restart aformentioned service" and some solution as for stop "Background Intelligent Transfer Service" before windows
    update service even though didnt pass.
    2) run windows update troubleshooter to idnetify the problems and fix the issue , it tells me its fixed but nothing there.
    I need your support please if somebody encounter that to let me run my windows Update for more information its colored with red.
    Ali Hadawe

    Hi ,
    First of all ,I would you suggest to check the status of the "Windows update "services " and "Background Intelligent Transfer service".Run "Services.msc" to open the services manager.
    Someone has tried the following methods to resolve the similar issue,please have a try :
    1.go into Windows Update and change the settings to "Never check for updates (not recommended)", click OK, and then change it back to "Install updates automatically".
    2.Turn on the Windows Defender and update it .
    Here is a link for reference :
    windows update cannot currently check for updates because the service is not running window 7 HELP(pay attention to Brook and Gab_Power`s answers)
    https://social.technet.microsoft.com/Forums/en-US/ee85d867-ce2f-412f-8c03-f43ab92132cc/windows-update-cannot-currently-check-for-updates-because-the-service-is-not-running-window-7-help?forum=w7itproinstall
    If the issue persists, please run the fix it tool in the following link to reset the windows update components to have a check .
    How do I reset Windows Update components?
    http://support.microsoft.com/kb/971058
    Best regards

  • Installation adobe reader XI 11.0.07 in windows 8 is not installed me, gives me a message that says "windows search cannot stop". What can i do?

    Installation adobe reader XI 11.0.07 in windows 8 is not installed me, gives me a message that says "windows search cannot stop" for several times. What can i do?

    I have no idea what this means; maybe you need to stop indexing?  Also try the installer from http://get.adobe.com/reader/enterprise/

  • Error during recovery -- Windows installation cannot proceed

    I have a Satellite A355-S6925, and I tried to reset my computer by pressing 0.  Now I'm getting this error.
    The computer restarted unexpectedly or encountered an unexpected error.  Windows installation cannot proceed.  To install Windows, click "OK" to restart the computer, then restart the installation.
    Now what?  If I click OK, it just ends up back at the same error.

    Never mind, I got it.  I just held 0 again to start it over.

  • Lion-Windows users cannot see attachments

    I just upgraded to Lion, and now some Windows users cannot see/find attachments. I did all that was advised (clicking on the "Windows user friendly" list), but to no avail. I sent to several Windows users and no one can see attachments with the new Mail program. Also, one of the most important icons in the Mail toolbar ("Add Attachment") seems to be missing. This sometimes helped in previous Mail versions when sending to PCs, but I cannot locate it in Lion. Looks like I will have to use Microsoft Office Outlook for email. This is too bad, as I like the other features the new Apple Mail program has, but must use a trustworhty email program.

    Scott,
    The issue is one I am chasing, and is due to Lion's change to not send Plain Text (apparently).  Although changed in the Compose window, when reviewed, it will have been sent with HTML, anyway.
    While the actual problem is with MS and Outlook or Outlook Express, the work around once was to use the command to Make Plain Text before sending.
    Ernie

  • Window that cannot be minimized

    HI,
    I want to create a window that cannot be minimized, it should always be in focus.
    I tried setAlwaysOnTop(true), but user can minimize this using WINDOWS KEY + D.
    If window is deactivated/deiconified i want it to reactivate/iconify.
    I have few querries (OS Windows).
    1) Is it possible to disable/access system commands programmatically using Java?
    2) If window is inactive or has lost focus how can it be re-activated and gain focus.
    3) Is it possible to disable task manager programatically.
    If this cannot be accomplished using Java APIs, then is it possible to achieve my requirement using native methods,
    if this is the senerio plz provide some link to the required knowledge base.
    Thanks,
    Prashant

    d32 wrote:
    HI,
    I want to create a window that cannot be minimized, it should always be in focus.if it's a JDialog, you can use setModal(true)
    >
    I tried setAlwaysOnTop(true), but user can minimize this using WINDOWS KEY + D.
    If window is deactivated/deiconified i want it to reactivate/iconify.
    I have few querries (OS Windows).
    1) Is it possible to disable/access system commands programmatically using Java?try adding a keyListener that overrides windows keys. set WINDOWS KEY + D to bring your window to front.
    >
    2) If window is inactive or has lost focus how can it be re-activated and gain focus.i wouldn't want to do it, but add a focus listener on your window. if the window loses focus, give it focus again.

  • After updating photoshop CS5 to 12.0.4 x32 (windows) I cannot open my documents/files or create new

    I had the problem before. Reinstalled Photoshop CS5 and updated again.
    Clicking a file starts Photoshop but does not open the file.
    If I click "new" to make a new file, nothing happens.
    Help....!!!!!!

    Hi PE
    Yes, but nothing happened.
    I was instructed to press some key during startup of Photoshop, and it should reset the program.
    However, it did not work.
    Br
    Lars Hansson
    Den 29/10/2013 kl. 11.49 skrev PECourtejoie <[email protected]>:
    Re: After updating photoshop CS5 to 12.0.4 x32 (windows) I cannot open my documents/files or create new
    created by PECourtejoie in Photoshop General Discussion - View the full discussion
    Hansson, did you get a window asking you if you wanted to reset your preferences.
    Maggedotno, is it the english version? Do you have third party plug-ins? Can you post the contents of help>system info?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5796463#5796463
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5796463#5796463
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5796463#5796463. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for