Windows 7 64 bit, changed wireless modem, now c4500 all in one will not print.

I had to have my wireless modem changed and now my 2 laptops will not print. 1). windows 7 64 bit.  2) windows xp, version 2002 service pack 3. The new wireless modem is from ATT u-verse 2wire892. I tried reinstalling on the windows 7 laptop and it tells me can't be installed on that operating system. I had it there before. I ran a Wireless Network Test Report and under the network name it still has the old net name not the new one, how do I change that?

Found diagnostic utility at hp support.  Though I lost all jobs in the queue, printer is again working.  YEAH!

Similar Messages

  • My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

    My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.  This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail!  Any help?

    The cyan portion of the printhead may be clogged.  I would suggest running the diagnostics shown here.  If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP C6150 All-In-One Will Not Print Black Text But Does Partial Test Print

    Hi.  Thanks in advance for any help anyone can proffer.
    I've read through the forum and I think there are some similar issues, but none exactly the same as ours.
    This HP C6150 does print pictures, but suddenly stopped printing black text.
    HOWEVER, the test prints will print in black with the Windows Logo, but will not print any associated text.
    Odd.  It just suddenly stopped printing.
    Variables:
    C6150 All in One - No other problems for two years.
    Using refilled ink cartridges from outside source. (not my decision)
    Ink is full.  No other changes made in last three days.
    Troubleshooting Steps:
    Uninstalled and then re-installed software in entirety.
    Put in 'new' (refilled) cartridge for black and magenta.
    Tried (not sure if successful) soft reset.
    Tried cleaning the print cartridge with 'Q-Tip' and distilled water.
    Have not yet spent money on new OEM print cartridges.  That is next step unless other suggestions merit.
    Possibilities:
    It may be the refilled cartridges, but they've worked so well in the past.
    The cartridge prior to the recent replacement was working fine and was not yet out of ink.
    The print head might be damaged.  But this should/would affect all black printing and this is not the case.
    Were the driver corrupt, the reinstall should have fixed it ... you'd think.
    So, we're looking for some suggestions prior to going out and getting a new printer.
    Thanks again, in advance, for constructive non-judgmental suggestions.
    MackNC

    The likely cause is the black ink is not printing at all.  When printing graphics (like the Windows Test Page) black is made from mixing the color ink.  I would suggest printing an internal diagnostic test page as shown in this page.  Does the black block print?  If not then clean the printheads as described here.  
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Officejet Pro L7780 All-in-One Will Not Print Blue Ink - It Prints Pink Instead

    HP Officejet Pro L7780 All-in-One -
    Issue:
    Blue ink will not print (It prints the color pink instead.).
    Actions taken:
    1.  Cleaned ink heads.
    2.  Replaced ink cartrige.
    3.  Reinstalled software.
    Sugestions by HP customer service:
    Purchase a new printer: Because the issue is software related - not reading the blue ink cartrige.
    Any suggestions or advice would be very much appreciated.
    Thank you for your time!
    Thank you.
    Sincerely,
    Ryan

    The cyan portion of the printhead may be clogged.  I would suggest running the diagnostics shown here.  If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • 7520 all in one will not print photos from photo tray from computer

    7520 all in one printer photodmart will not print photos from computer from the photo tray

    Hi,
    By default it picks main tray, you have to tell it to pick papers from photo tray:
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HP 5520 all-in-one will not print alignment page

    Printer printed page as if there was no black ink. Replaced cartridge and tried to align but would not print a proper alignment page. Replaced all cartridges.Page it prints is not recognized in scan. I have tried everything. UnPlugging, reload paper, new driver, new install, I need to print tax info and the **bleep** thing will not align, will not copy, will not print. Help

    The post here has links to a troubleshooting document for the Photosmart 5520.  If the steps there do not resolve the issue please call HP Support, even if the printer is not longer under warranty.  In the US or Canada call 1-800-HPINVENt, elsewhere see the document here for contact information.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • My hp f380 all in one will not print items in queue

    My printer keeps disconnecting from my computer or going offline and will not print things so they go into the queue and i am unable to view or print anything from queue

    Hi jaimi,
    I understand you're having some issues printing with your Deskjet F380 printer. I will certainly do my best to help you with this.
    This document here covers all of the operating systems and will guide you through a few things to get the print jobs our of the queue.
    Hope this helps, have a great day!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • After move, all-in-one will not print or connect

    My All-In-One was working fine before we moved.  Now, it says it isn't connected to the computer. I have tried connecting via ethernet and USB as well as wirelessly.  I have downloaded the HP doctor, new drivers, and I am at my wits end.  Really need the printer capability!  Copy and fax are working fine.

    Hello @momof3cs,
    Welcome to the HP Support Forums!
    I would like to assist you today with resolving the communication issue you're experiencing when attempting to print from your Windows 7 computer to your HP Officejet Pro L7580 All-in-One Printer. Now, with a new location comes a new setup of your printer. If your printer was previously configured over your network you will need to reconfigure the network settings on your product to re-establish that communication. Please follow the steps below to correct this connection issue.
    If you have a USB Cable attached to your printer, please disconnect that now. 
    If you have an Ethernet Cable attached to your printer, please disconnect that as well.
    Step 1: Restore Printer:
    For troubleshooting purposes, it is important to have a nice clean slate to work with. Therefore, I am going to have you restore any network settings on your printer.
    Select the Setup button on the front panel of your printer
    Right arrow to Tools and select OK
    Right arrow to Restore Factory Defaults and select OK
    Once the Restore is complete, please proceed to the next step.
    Step 2: Uninstall Drivers:
    Click on your Start menu
    Select All Programs
    Select the HP folder
    Select your HP Officejet
    Select Uninstall
    Follow the onscreen instructions to complete the uninstall.
    Step 3: Install Drivers:
    If you want to use the printer over an Ethernet connection, please plug the ethernet cable in from the rear of your  printer directly into your router
    Next, click here to download the drivers for your printer
    Once the website opens select the Download button on the top left
    If prompted, please allow the download to Run
    Once the download is complete, please follow the onscreen instructions to install your network printer
    Once the installation is complete, please test your machine to ensure that everything is functioning.
    If you also want your printer installed with a USB Cable, please follow the steps below.
    Click on your Start menu
    Select All Programs
    Select the HP folder
    Select your HP Officejet
    Select 'Connect a Device' or 'Add a Device'
    Choose that you want  to install for USB
    Only plug in the USB Cable when the installer prompts you to
    Once this install is complete, please test printing to ensure everything is working.
    If you want your network printer to be the default printer you will need to go to your Start menu, click on Devices and Printers, right click on your network Officejet and select Set as Default Printer.
    Please respond to this post with the result of your troubleshooting. Best of luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • HP 6510 All in One will NOT print Black ink

    I replaced my black ink cartridge & it will not print black ink. Yes HP genuine. I have tried everything I have read on here and elsewhere and it doesnot help  I have gone to 4 different stores and bought 4 different black ink cartridges thinking perhaps it was defective cartridges but no it is defective printer.... I see so many frustrated individuls on here with same problem, saddens me because I love my hp printer & pc's :/ my  A printer should definately last longer than a couple of years .....sstarting to hink hp is going down hill since they have no fix for something that is their products fault and nort the user....they should really offer a recall or free repair/replacement...so many people with exact problem

    Hi Tam1711,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message after the weekend from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details)
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    I work for HP

  • My hp 6500 all in one will not print from photo gallery

    hav downlaoded digital pics and tried to print from photo gallery with no success.  documents will print from ms word but cannot print pics

    Hmm, that is troubling. What operating system are you running on your laptop?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • HP Officejet 8600 all-in-one will not allow me to use features

    ALCON - after installing Yosemite (well upgrading) my all-in-one is not functioning. I have gone to HP's website to no avail nothing that can help. I uninstalled the software restarted my computer and restarted the printer. Updated the firmware on printer yet nothing is working correctly. I cannot scan documents nor fax. I get a message from the printer saying that the printer cannot communicate with the computer. I also have the HP assistant installed on my mac and yet still the computer cannot communicate with the printer's scanner and vice versa. I am at a loss. Any feedback would be appreciated. I really need to scan some documents and get them sent out. I had to go to my PC as a last resort. Suggestions please?

    I may have found a fix for this problem. For those who are using Mavericks or Yosemite: Uninstall the current printer driver and install the printer driver dated Oct 22, 2014 and then install a patch update. I will copy and paste the link. For some odd reason the drivers I had prior to upgrading the OS was not willing (I upgraded from Mountain Lion).
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4182&lc=en&cc=us&dlc=en&s w_lang=&product=4323648#N191

  • Driver for Officejet 4500 Wireless all-in-one will not install after upgrading to Windows 8.1

    Upgraded to Windows 8.1 on Pavilion g6.  Officejet 4500 Wireless all-in-one still prints but won't scan.  Downloaded full feature driver.  Installation quit giving error message 'file cannot be found'.  Tried 'chat' sessions with no resolution
    This question was solved.
    View Solution.

    Hello bob5e,
    I am sorry to hear that you are unable to install successfully on your Windows 8.1 with your Officejet 4500 Wireless. I can see that the installation quits on you, giving you an error message. I am going to recommend trying a couple of things to hopefully make the installation successful.
    1. First of all, try installing by using The Printer Install Wizard for Windows which finds the correct driver for your unit and installs it.
    2. If that does not work, please try this next troubleshooting document step by step.
    Installation issues - The Progress Bar on the Software Installation Stops or Stalls
    I hope this helps!
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP5640 All-in-one does not print photos from Windows Live Photo Gallery

    Setup printer using mobile device  Installed print driver using provided CD. Updated driver software. Printer is networked by wireless to computer & smartphone.Was able to print photo from smartphone, was able to print Word document from computer. Was unable to print photo from computer using Windows Live Photo Gallery. Used the HP troubleshooter, following all possible solutions to no avail. Selected the option of HP Photo Paper but it defaulted to the 8x11 paper tray. Can someone please help? Thank you!

    Hey , Welcome to the HP Support Forums!
    I understand that you're experiencing issues when printing from Windows Live Photo Gallery on your Windows 8 computer to your HP ENVY 5640 e-All-in-One Printer, as your prints continue to default to the letter size Paper Tray. I would like to assist you today with resolving this printing issue. Can I please have you follow the steps below to properly configure your print settings under the Print dialogue window in Windows Live Photo Gallery.  1. Load your Photo Paper in the Photo Tray on your printer  2. Open an image you would like to print under Windows Live Photo Gallery 3. Click on File and select Print   4. Under the Print dialogue window please ensure that your printer, Paper Size, Quality, and Paper Type are all set properly for your specific print job    5. Next, click on the Options button on the bottom right hand corner. Under the Print Settings dialogue box click Printer Properties.    6. Next, change the Paper Source to Photo Tray. If it currently is set to 'Main Tray' please click the Main Tray option and it will drop down to allow you to select Photo Tray. Click OK once the Tray change has been made.    NOTE: If the Paper Size shows an exclamation mark, it means that your Photo Tray does not support the Paper Size selected. Click the dropdown next to Paper Size and choose a size that does not show an exclamation mark.     7. Under the main Print dialogue window click Print on the bottom right   Your document should print as per normal now from the proper Paper Tray.   Please let me know if the steps provided resolve your Paper Tray photo printing issue. I look forward to hearing from you. Good luck!

  • Wireless HP Photosmart eAll-in-On​e will not print from Word program in HP G60-535DX Windows 7

    Wireless connection checks out on both the Pc and the printer.  All options check out correctly.  Until a week ago
     my 2 year wireless connection worked correctly.  I can print from the Internet but not from any Windows
    programs.   I have contected HP 3 times last night; accessed Print and Scan Doctor and all options listed on help menus for PC and printer.    Is there a new driver to correct this problem?

    Hi,
    Here's the link for the latest driver for your printer.
    Printer Driver
    Make sure you save the file when prompted before running it.
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • 7410 All In One will not connect

    I have a 7410 All In One.  It's about 3 years old.  Within the last 6 months it has been manifesting an ongoing problem.  When not in use for a period of time, it will simply stop functioning.  Upon disconnecting-reconnecting the power cord, the center screen will illuminate and a white bar across the bottom will appear suggesting it is connecting, but the "On" light will not come on.   According the hp site the drivers are up to date.  
    Another oddity is that when it is in this condition, it will suddenly come back to life.  This has happened a couple of times after anywhere from 6 to 12 hours.  Unfortunately, it is in this mode now and there are documents that have to be printed.
    It has never scanned properly, either, so the All In One functionality is pretty much nil.
    Does anyone have any thoughts on this?
    Thanks,
    WS 

    Hi YSJA,
    I'm sorry to hear you've had problems accessing your Officejet 7410 since adding the AirPort Extreme to your home network.
    I have included a link to HP's Wireless Printing Center troubleshooting section. It has section, "Was anything changed or updated on your router recently?" that has detailed steps to help you resolve the issue.
    Wireless Printing Center Troubleshooting
    http://www.hp.com/global/us/en/wireless/troubleshooting.html
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

Maybe you are looking for