Windows 7 64-bit Cisco Fabric/Device Manager Installer

Does anyone know if there is Cisco Device Manager Installer compatible with Windows 7 (64-bit)? I'm trying to install Device Manager onto my Windows 7 PC. this may happen on my Fabricv Manager Installer, as well. Any help would be appreciated.
Thanks

Senthil, Horacio,
I would not recommend using a 8.5(x) client against a 8.0(x) server (the OP suggests UCCE 8.0 is used). Even though they _should_ be compatible, they usually are not.
Upgrading the server side to 8.5 is the way to go IMHO.
G.

Similar Messages

Does Cisco Fabric/Device Manager 5.0(4d) run under VM?

I'd like to upgrade the OS on our W2k3 to W2K8 64-bit via virtual machine. First, is it possible to run Cisco Fabric and Device Manager under VM 2K8 64-bit? Has there been any issues reported running these tools, on VM?
Thanks

Hello Jayson,
Yes, Cisco Fabric Manager and Nevice Managercan run on W2k3 to W2K8 64-bit VM
http://www.cisco.com/en/US/partner/docs/switches/datacenter/mds9000/sw/5_0/release/notes/fm/fm_rel_notes_504d.html
VMs:
VMs that run any qualified or supported operating system version can run Cisco Fabric Manager.
Thanks

Cisco View Device Manager

Hi,
is there anybody who can tell me how to bring the Cisco View Device manager for 6500er up? I've installed the CVDM V.1.1 in the bootflash of my 6500er, IOS version is 12.2(18)SXF4 enterprise services. Installed java on the client is v.1.4.2_06. After launching the CVDM whithout proxy settings the windows starts gathering information, after a few seconds it stops with an error "java.lang.NullPointerException". This failure appeared with Mozilla 2.0.0.8 and IE 6.0, on the 6500er all vty lines are idle. Is anybody here who can help to solve the problem?

Here the text from the readme file; try to get the zip-file via the Bug-Id:
09-December-2005
This patch provides fix for the following bug:
CSCsc10956 - CVDM 1.1 does not work with 12.2(18)SXF
SUPPORTED IOS VERSION:
12.2(18)SXF
SIZE:
5,593,057 Bytes
DOWNLOADING AND MOVING FILES TO TFTP SERVER:
cvdm-c6500-1.1-CSCsc10956.zip contains the following two files
* cvdm-c6500-1.1.tar and
* cvdm-c6500-1.1_K9.tar (for Cisco IOS Cryptographic software)
Unzip cvdm-c6500-1.1-CSCsc10956.zip and copy one of the tar files to a TFTP server
Make sure to enter filenames exactly as they appear; (filenames are case-sensitive).
TRANSFERRING FILES TO YOUR SWITCH:
Step 1 : Access the switch CLI using a Telnet connection or the console port.
Step 2 : Transfer the files from the TFTP server to the bootflash of the switch. Issue
the following command:
# archive tar /xtract tftp:// / bootflash:
where is the filename of the CVDM-C6500 tar file you want to install
and is the IP address of the TFTP server. Make sure to enter filenames
exactly as they appear (filenames are case-sensitive). Make sure you are not in
configuration mode when issuing the archive command.
Step 3 : If you are not in configuration mode, issue the following command:
# configure terminal
Step 4 : Set HTTP server and path. For example:
# ip http path bootflash:
Please refer cvdm-c6500-1_1_readme.pdf in http://www.cisco.com/cgi-bin/tablebuild.pl/cvdm-6k for
further details on CVDM-C6500.

Cisco PIX Device Manager Version 3.0(2)

Hi
I have a PIX 515E:
Cisco PIX Firewall Version 6.3(4)
Cisco PIX Device Manager Version 3.0(2)
Compiled on Fri 02-Jul-04 00:07 by morlee
CCP-Firewall001 up 2 years 65 days
Hardware: PIX-515E, 32 MB RAM, CPU Pentium II 433 MHz
Flash E28F128J3 @ 0x300, 16MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: ethernet0: address is 0012.80be.450d, irq 10
1: ethernet1: address is 0012.80be.450e, irq 11
Licensed Features:
Failover: Disabled
VPN-DES: Enabled
VPN-3DES-AES: Disabled
Maximum Physical Interfaces: 3
Maximum Interfaces: 5
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited
<--- More ---> Throughput: Unlimited
IKE peers: Unlimited
This PIX has a Restricted (R) license.
Serial Number: 808480455 (0x30306ec7)
Running Activation Key: 0xac646fed 0xf8b86795 0xc3951ec2 0xb32aed09
It's operate with Java plug in 1.4.1 y I have a PC with IE 7 and Plug in 1.6.0 y doesn't download the PDM.
Are there a solution for it?

Try Disable Java on Internet Options. This issue oculd be releated to Java version also.

ITunes 10.1.1 for Windows (64-bit) Does Not Run After Installation

I recently upgraded my laptop to Windows 7 and downloaded the 64-bit installer (iTunes64Setup). Although I recieve the notice that it was installed, when I start it up, I receive the "iTunes Library.itl cannot be read..." error message whenever I try to start it.
I have uninstalled the program, deleted the original setup file (iTunes64Setup), downloaded it again and re-installed it twice with no success.
Is there something I am doing wrong? Any assistance is greatly appreciated.
Thanks,
John

Finally got it installed and running.

Windows Tablet workplace turn on device management failed on auto-discovery without any error

Hi
I am using windows surface pro 3 to test windows mdm function. I set up a CNAME for my test domain and pointed it to my develop desktop. My discovery service uses a publicly signed cert from VeriSign. If I turn off the auto detect server address switch and
input the discovery server manually, everything works well. But if I using the auto-discovery, the enrollment stopped before sending the discovery SOAP request.
Below is the network traffic between my tablet and my server:
step1: https to enterpriseenrollment.mydomain.com and failed for SSL certificate mismatch
step2: http to enterpriseenrollment.mydomain.com and get 302 redirect(my discovery service)
step3: https get to my discovery server and get HTTP 200.
Then the tablet does not send any request any more, it should send a HTTP get again with Content-Type: soap+xml and then a POST with soap but it not.
These work flow is as same as the Windows Intune and Intune works! I don't know why.
Thanks for any help!

Yes, because if you are using the actual hostname in the manual address, something like
https://yourServer/..., and if the SSL Certificate is issued to "yourServer" (CN=yourServer), then there is no certificate name mismatch or SSL errors during certificate validation.
However, when the automatic enrollment happens and the HTTPS request is sent to
https://enterpriseenrollment.yourServer.com/..., then even though the underlying connection is made to yourServer IP Address, the certificate that the server presents is for yourServer, not enterpriseenrollment.yourServer.com.
So there will be a certificate name mismatch and the secure channel establishment will fail.
For this automatic scenario to work properly, the server certificate must be issued to the correct domain - such as a wildcard certificate (*.yourServer.com). That should ensure that there are no secure channel errors and then the enrollment process can
continue further.
You can use the manual address for development/testing purposes, but once you decide to release the solution, you may want to use the automatic discovery for easier end user interaction and use the right SSL certificates - issued to the right CN.
Windows Store Developer Solutions, follow us on Twitter:
@WSDevSol|| Want more solutions? See our blog

Devices Not Showing Up in Device Manager After WinXP Install

I installed Windows XP Professional CD after re-formatting and partitioning the hard drive in my ThinkPad T42 (2378-FVU).
After finishing the install and running Windows Update for an eternity, Device Manager still can't detect several items. (I was able to get my wireless networking to work after installing a driver from Intel.) These are the "Other Devices" in yellow listed in Device Manager:
- Ethernet Controller
- PCI Modem
- Video Controller (VGA Compatible)
Yes, I dutifully downloaded and installed these and other device drivers from Lenovo's website.
Why doesn't WinXP SP3 detect my devices?!?
I saw other posts about a WinXP Pro install on T41 Thinkpads with the same problem. The recommended solution was to install the device drivers "twice." I'm sorry, but I don't understand what that means, twice? The solution also seemed to indicate that the install is supposed to be done at two different locations. But, only one path is listed in the solution and my drivers are installed in the solutions' paths.
Hopefully, someone can be more explicit about how to do the driver installations twice.
Thank you in advance for your help.
- nello
Solved!
Go to Solution.

Hi and welcome to the forum!
The other path is C:\DRIVERS\WIN....the first setup tells you the exact location if you pay attention.
Hope this helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Help!!! Device Manager Stopped Working

Hi everyone.
I just bought a blackberry 9700 yesterday and i am having trouble with the device manager. After installation, i plug the blackberry using the usb into my laptop (windows 7) and it says Device Manager has stopped working and wants me to close the program. I have uninstalled it and re-downloaded it again and again but the same error keeps happening. I don't know what to do!!!
Problem signature:
Problem Event Name:   APPCRASH
Application Name:   DesktopMgr.exe
Application Version:   5.0.1.18
Application Timestamp:   4a8f1751
Fault Module Name:   DesktopMgr.exe
Fault Module Version:   5.0.1.18
Fault Module Timestamp:   4a8f1751
Exception Code:   c0000005
Exception Offset:   000e6535
OS Version:   6.1.7600.2.0.0.768.3
Locale ID:   1033
Additional Information 1:   403f
Additional Information 2:   403f35dd908937b530ffdc22ba261dd5
Additional Information 3:   9f45
Additional Information 4:   9f455bf85c8eaf21790c645909366eab

Hi and welcome to the forums!
Try removing both device and desktop manager programs from the startup group in WIndows and see if the error continues.
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Bluetooth radio missing, not found in device manager - Probook 4530s

I have a Probook 4530s with Windows 7 Ultimate, 64-bit installed on it. A little while ago I wanted to use bluetooth for networking, but thee was no bluetooth adapter in the Network Connections window. I looked in Device Manager next, thinking maybe there was something wrong with the driver, but no bluetooth adapter showed. I've tried rebooting, turning it off and on in BIOS, and even just pressing the wireless button, but nothing has worked.
Along with Windows, I have Mac and Ubuntu installed. Bluetooth dooesn't work on any of the operating systems, but it used to.
Any help with getting my adapter working again would be appreciated.

Hi,
Its more than likely Ubuntu that has caused the problem. I can't say for sure though as I've never used the model of laptop you have. With the WiFi/Bluetooth portion of the hardware its not just a driver that keeps the hardware running correctly, there is a firmware as well. I managed to kill my WiFi card for a while when I was messing with Linux OS's. Find out the precise model of the bluetooth adapter on your laptop (it may be a WiFi/Bluetooth combo card?) then start searching the Linux communities for information about the firmware for the cards.
Sorry I can't be more helpful.
DCampbell

Device Manager Issues

HP Pavilion DV9700-DV995nr
Windows Vista 64
In my Device Manager located in the Other Devices tab you will find what looks like this
+Other Devices
! Base System Device
! Base System Device
! Base System Device
! Unknown Device
! Unknown Device
I reinstalled Windows yesterday and these errors are a direct result of which.
How can I fix this?
This question was solved.
View Solution.

Hi:
Try these drivers:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-55777-1&cc=us&dlc=en&lc=en&...=
For the unknown devices, please click on each one in the device manager.
Then click on the details tab. In the Properties drop down list, select the second item (Hardware ID's).
Post the top string of characters you see in the window.
Those will provide more info about the devices and I can send you the links to the drivers you need.
Paul

Where is the device manager on the g-7 1150us?

I have an HP Pavilion g7-1150us, and I do not know where the device manager is located. Can someone please help? Thank you,BeeBudd
This question was solved.
View Solution.

Hi,
If no change, your machine runs Windows 7 Home Premium. Device Manager is in the Control Panel. Please
Click Start then click Control Panel. You can see Device Manager in there
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HD4000 showing as Standard VGA adapterer in Device manag

Hello,
So i reinstalled Windows 7 ultimate and the device manager is showing my HD4000video card as standard VGA card. I have disbaled my discrete nvidia card as I am trying to use this HD4000 card in tandem with my egpu. However for that to happen the HD4000 needs to work properly !
i tried installing drivers for HD4000 from the website buy it says "this computer does not meet the minimum requierments for installing this software "
please help. i have a t430.

also, when i run performance tests im getting a score of 1 for graphics... in real time they dont appear as bad !

Can't Install CISCO Fabric manager in Windows 7 32 Bit.

Hello Folks,
Can some one let me know how to launch the Fabric manager installer in IE 8, I am using Windows 7 32 bit OS with IE 8.
I can't launch the Fabric manager installer in IE 8, your help much appriciated. thanks in advance.

Open DOS command prompt
\bin\java -Xms512m -Xmx512m -jar
example:
C:\Program Files\Java\jre1.5.0_11\bin\java -Xms512m -Xmx512m -jar c:\tmp\m9000-fm-5.0.7.jar

Cisco Fabric Manager silent installation

Hello,
I'm trying to deploy the Cisco Fabric Manager to a bunch of users and I would like to know if there is a way to automate the installation?
Defaults are fine (also default passwords for the postgreSQL database)
Has anyone done this or is it even possible.
Thanks in Advance
Edit: Verison of Fabric is 4.2.7a

Hello,
Release notes. Refer to Table 4 -
http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/5_0/release/notes/fm/fm_rel_notes_507.html#wp727733
Windows Server 2008 64 bit
Download link (once you are logged into Cisco.com with your cco userid) -
http://software.cisco.com/download/release.html?mdfid=282731430&flowid=18002&softwareid=282762464&release=4.2%289%29&relind=AVAILABLE&rellifecycle=&reltype=latest
Path -
Downloads Home
Products
Storage Networking
Cisco MDS 9000 Multilayer Directors and Fabric Switches
Cisco Fabric Manager
Thanks,
Arun

Yellow mark in device manager under other devices pci driver for B50 laptop with Windows 8.1 64 bit

Dear All,
in device manager - other devices - pci device is with yellow mark os:windows 8.1 , laptop B5070 series .
in PCI events tab mesage is:
Device PCI\VEN_10EC&DEV_5229&SUBSYS_380117AA&REV_01\00000001004CE00000 was configured.
Driver Name: null
error code 28
pls. suggest how remove yellow mark, suggest or provide link to get compatable driver.
regards,
Mallik
Solved!
Go to Solution.

Good day and welcome to the community.
Based on the device string you included, http://www.pcidatabase.com/index.php returns the following:
Device Id Chip Description Vendor Id Vendor Name
0x5229 Realtek PCIE CardReader 0x10EC Realtek Semiconductor Corp
For reference, here is the link to your mahine's support pages:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-b-series-laptops/lenovo-b50-70-...
and here is the sublink for the Win8.1 drivers for the device detailed above:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-b-series-laptops/lenovo-b50-70-...
Hope this helps a bit.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Windows 7 64-bit Cisco Fabric/Device Manager Installer

Similar Messages

Maybe you are looking for