Windows 7 64-bit Error -1856
I'm running Windows 7 64-bit with QuickTime 7.6.9 installed. Whenever I try to open a QuickTime movie (.mov) I get a "Error -1856: an unknown error occurred". This seems to be a permissions issue because I can get QuickTime Player to open the file if I launch QuickTime Player as an Administrator. Is there a fix for this issue? Please don't say turn UAC off
I encountered this issue with a QuickTime update back in May or so of this year and every QuickTime update to-date results in the same error.
Unfortunately, running as admin is a workaround, not a fix. If quicktime is attempted to be called by 3rd party apps (not itunes) quicktime fails. And since the EXE isn't directly called, the "running as admin" workaround doesn't work.
Many thanks for the heads up ... which sorts of third party applications are you getting that with? Adobe Creative Suite, for example?
Another possible workaround is to run QuickTime normally in a different Windows user account on the PC. (That can dodge the troublesome ACLs causing the trouble in the usual user account.)
So by extension, if you run the third-party app in a different user account (in which QuickTime isn't getting the 1856), does that get you past the QuickTime failure?
Similar Messages
-
Installed iTunes 10.2.1 for Windows (64-bit), Error 7 Windows 998
Hello
After updating iTunes 10.2.1 for Windows (64-bit)I am getting the dreaded iTunes was not installed correctly, Please reinstall iTunes. With error 7 (Windows error 998) popups.
Tried already all the known uninstall/install/repair suggestions. Tried runnng as administrator or changing permissions. Tried disabling Bonjour Service.
Until now nothing has repaired it.
Is there a way to fix this? Can it be an Adobe update?
Is there a way to get an older version?I had the same problem. I tried doing a system restore to a day or 2 before i did the update. The restore was successful but the itunes problem remained. After that I went into the control panel, selected itunes and clicked the repair tab.
It now works fine for me. The only other step I took was to copy my itunes folder into another location in case anything went wrong. Once the repair was complete I simply replaced the new empty itunes folder with my previous one.
Hope this is of some help. -
OBIEE 11g on Windows 7 64 bit - Error while configuring????
Hi Experts,
I am installing OBIEE 11g on Windows 7 64 bit. And I followed below steps:
1. Installed JDK 64 bit.
2. Installed Weblogic Server with 64 bit JDK.
3. Installed OBIEE 11g - Software only Installation.
4. Ran configuration script. cofig.bat.
5. Configuration Wizard opened and during the configuration process(step 10 of 11) got an error. Refer below screen shot for the error.
6. I got the same error when I tried installing 11g on Win server 2003 32 bit and I installed JRocket MissionControl and reinstalled 11g and there are no errors.
7. So, remembering that I installed JRocket Mission Control 64 bit.
8. Un installed previous 11g.
9. Reinstalled 11g on Windows 7 64 bit.
10 And coming to configuration part it gave same error. Don't know what to do.............can any one help me at this point.
http://img690.imageshack.us/img690/1342/obiee11gconfigerror.jpg
Thanks in advance,
DKHi All,
I've got the same error but with the installation of OBIEE 11g on Windows 32-bit.
I also tried to continue the installation, but I've got another error in the Executing: opmnctl start coreapplication_obisch1.
Even with those errors, I finished the installation but of course I've some problem with the presentation server and webLogic, becasue they're not configured properly.
Any idea how to solve the problem?
Thanks -
Error installing MaxDB 7.6.03.09 on windows 32 bit on NW70 SR2 sapinst
MaxDB experts,
Hello. I am trying to install SAP NW70SR2 (JAVA AS) on MaxDB 7.6.03.09 with windows 32 bit OS. Brand new install, JAVA AS central system.
Our problem is in the SAPINST phase:
Install database server software
I see this in the sapinst.log file:
starting installation phase of package Base 7.6.03.09 32 bit
ERR: InstallRegistry::newPackage(): can't add Package "Base" -> "c:/sapdb/programs": already exists!
installation exited abnormally at Th, Apr 09, 2009 at 16:19:41
ERROR 2009-04-09 16:19:41 [iaxxinscbk.cpp:282]
abortInstallation
MDB-07020 The database installer reported an error. Some database applications are probably still running. Check the log file sdbinst.log.
And this is in the bottom of the sdbinst.log file
starting installation phase of package Base 7.6.03.09 32 bit
ERR: InstallRegistry::newPackage(): can't add Package "Base" -> "c:/sapdb/programs": already exists!
installation exited abnormally at Th, Apr 09, 2009 at 16:19:41
The sdbinst.log has lots of other interesting info:
This is the top of the file:
Installation of MaxDB
+ ***********************+
starting installation Th, Apr 09, 2009 at 16:18:56
operating system: Windows I386 NT 5.1 Service Pack 3
callers working directory: C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ADA/CENTRAL/AS
installer directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
archive directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
starting preparing phase of package Base 7.6.03.09 32 bit
getInstalledReleasesWin(): wrong version format
checking interferences to other packages... ok
I'm not sure why there is a version info problem.
This is a windows PC I'm trying to put this on. It's 32 bit so that is why I had to get the SR2 DVDs. The SR3 DVD won't let you install via 32 bit OS.
I downloaded all the software from OSS marketplace and some from our delivered DVDs:
We have these DVDs
32 BIT BS_2005_SR2_SAP_Installation_Master 51033208
32 BIT NW_7.0_SR2_Kernel_WINDOWS__LNX_X86 51033262
NW 7.0 SR2 SAP Installation Export 51032246
NW 7.0 SR2 SP09 Java based SW Comp 51032257
I pulled this down off the marketplace (in the NW70SR3 area)
32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10
I've searched all through OSS/SDN for someone who has this same issue. All our other systems are AIX/oracle so trouble-shooting MaxDB is completely new to me.
Can anyone point me into the right direction to get this figured out? I'm tried just re-running the install, same error. And removing the c:/sapdb/programs, no good.
Thanks!
NickNatalia,
Here is the entire Install log for MaxDB. Also remember that this was called as part of an SAP system install:
MaxDBServer_install-10.04.2009-10.05.log
INSTALLER_INFO: Version = 7.6.03 Build 009-123-163-622
INSTALLER_INFO: Changelist = 163622
INSTALLER_INFO: MakeId = 267230
INSTALLER_INFO: Type = kit
SYS_INFO: Host name = DGW58J1L
SYS_INFO: System = Windows
SYS_INFO: Architecture = I386
SYS_INFO: Version = NT 5.1
SYS_INFO: Subversion = Service Pack 3
CALL: SDBINST -indep_prog C:\sapdb\programs -indep_data C:\sapdb\data -depend C:\sapdb\CEL\db -profile Server -b
STDOUT:
Installation of MaxDB
STDOUT: ***********************
STDOUT: starting installation Fr, Apr 10, 2009 at 10:04:43
STDOUT: operating system: Windows I386 NT 5.1 Service Pack 3
STDOUT: callers working directory: C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ADA/CENTRAL/AS
STDOUT: installer directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
STDOUT: archive directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
STDOUT:
MSG: debug package SDBBAS.SDB is valid
MSG: debug package SDBKRN.SDB is valid
MSG: debug package SDBUTL.SDB is valid
STDOUT:
starting preparing phase of package Base 7.6.03.09 32 bit
STDOUT: -
MSG: service "sql6" in "C:/WINDOWS/system32/drivers/etc/services" found
MSG: service "sapdbni72" in "C:/WINDOWS/system32/drivers/etc/services" found
MSG: InstallRegistry: space check ok: 127249572 kb on C: (156288320 kb total) available
MSG: install registry successfully locked
MSG: read 12 PACKAGES
MSG: net registry size = 121301 bytes
MSG: InstallRegistry: reserved 1024 kb disk space
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: independent data path: c:/sapdb/data
STDOUT: independent program path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SDBBAS.TGZ"
STDOUT:
package Base successfully checked
STDOUT:
starting preparing phase of package SQLDBC 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package SQLDBC 76 7.6.03.09 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: dbc path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SQLDBC76.TGZ"
STDOUT:
package SQLDBC 76 successfully checked
STDOUT:
starting preparing phase of package Fastload API 7.6.03.09 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: fastload path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/FASTLOAD.TGZ"
STDOUT:
package Fastload API successfully checked
STDOUT:
starting preparing phase of package PCR 7104 7.1.04.45
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: independent program path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7104.TGZ"
STDOUT:
package PCR 7104 successfully checked
STDOUT:
starting preparing phase of package PCR 7300 7.3.00.59
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: precompiler 7300 path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7300.TGZ"
STDOUT:
package PCR 7300 successfully checked
STDOUT:
starting preparing phase of package PCR 7301 7.3.01.22
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: precompiler 7301 path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7301.TGZ"
STDOUT:
package PCR 7301 successfully checked
STDOUT:
starting preparing phase of package PCR 7403 7.4.03.49 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: precompiler 7403 path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7403.TGZ"
STDOUT:
package PCR 7403 successfully checked
STDOUT:
starting preparing phase of package PCR 7500 7.5.00.46 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: precompiler 7500 path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7500.TGZ"
STDOUT:
package PCR 7500 successfully checked
STDOUT:
starting preparing phase of package SAP Utilities 7.6.03.09 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: : c:/sapdb/data
STDOUT: independent program path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SAPUTL.TGZ"
STDOUT:
package SAP Utilities successfully checked
STDOUT:
starting preparing phase of package DB Analyzer 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package JDBC 7.6.03.03
STDOUT: -
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package Server Utilities 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package Database Kernel 7.6.03.09 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: dependent path: c:/sapdb/cel/db
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SDBKRN.TGZ"
STDOUT:
package Database Kernel successfully checked
STDOUT:
starting preparing phase of package Redist Python 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package Loader 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package Messages MSG 0.5603
STDOUT: -
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package ODBC 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT: checking filesystem "C:"... free disk space ok
MSG: available = 127248680 kb
MSG: needed = 339145 kb
STDOUT:
starting installation phase of package Base 7.6.03.09 32 bit
STDOUT: -
STDERR: ERR: InstallRegistry::newPackage(): can't add Package "Base" -> "c:/sapdb/programs": already exists!
STDERR: installation exited abnormally at Fr, Apr 10, 2009 at 10:05:29MSG: packagedata of package SQLDBC not changed
MSG: packagedata of package DB Analyzer not changed
MSG: packagedata of package JDBC not changed
MSG: packagedata of package Server Utilities not changed
MSG: packagedata of package Redist Python not changed
MSG: packagedata of package Loader not changed
MSG: packagedata of package Messages not changed
MSG: packagedata of package ODBC not changed
MSG: writing 12 packages
MSG: net install registry size = 121301 bytes
MSG: wrote install registry (141250 bytes)
MSG: install registry successfully unlocked -
RW-50004 error when installing Oracle EBS 12.1.1 on Windows 32 bit, 2003
Hi All
I am installing Oracle EBS 12.1.1 for Windows 32 bit on a Windows 2003 server, my pre-requisite checks have gone through successfully when checked by the oracle ebs installer.
However during the installation process i get RW-50004 error and the installation stops, the log file seems to have the following last entries
Mon 07/04/2011
05:05 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_99a4659\adcvmlog.xml.07041705
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_99a4659
adsvdlsn.cmd INSTE8_SETUP 9020
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Can some one please help me on what I am missing or how can i correct this. Thank you.adsvdlsn.cmd INSTE8_SETUP 9020Search AutoConfig log file for adsvdlsn.cmd and you should find more details about the error.
Please see if (Rapidwiz R12 Failed at 66% with error: RW-50004: Error code received when running external process. [ID 418109.1]) is applicable.
Also, please run md5sum as per (MD5 Checksums for R12.1.1 Rapid Install Media (Doc ID 802195.1)) to verify the integrity of the stage area directory.
Thanks,
Hussein -
I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2. How can I fix this? I have uninstalled and reinstalled it several times and it still doesn't work.
What computer do you have? is it 32 or 64 bit operating system?
-
Hello,
When trying to run CS5 (64 bit) on Windows 7 get error failed to initlialize COOLTYPE ?
Any ideas ?
I tried re-installing CS5 Master collection but that failed as well.
Running out of ideas
RichardI have the same problem, and while I can 'fix' it with the approach described here, I have to 'fix' it that way EVERY TIME I launch itunes. I suppose the lousy support for mainstream computers is apple's way of saying, 'well of course you can't use your phone, you're not living in a (TM) apple home (TM) please sell your existing home and purchase one from apple if you want your phone to work.' I never would have imagined that as a computer programmer it would be a multi-hour/failed installation process to get iTunes and the iPhone4 working properly. What a joke.
-
action list not found error when trying to install Flash 11. I have IE8 and windows 32 bit. What can I do? Thanks
Hi, Please try to download the installer from the links provided in the following page: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
Thanks,
Sunil -
Error numbers are 2502 and 2503 for installing iTunes for Windows 64 bits. How to fix?
Hey guys,
I cannot install iTunes (latest vision) on my new laptop (Windows 64 bits), and it says that the error numbers are 2502 and 2503...
Can someone tell me how to fix this?
Thank you!Check your system date & time is correct.
Run the System File Checker: http://support.microsoft.com/kb/929833
If you still have problems try a creating a new user account with administrator rights, log into it, and attempt the install from there.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Error with Installation of SAP R/3 4.6C on Windows 64 Bit
Hi,
we have the following problem by installing the SAP R/3 4.6C on Windows 64 Bit:
DBDBSLTESTCONNECT_NT_IND , SysDbslConnect: 100
Cannot connect to DB, rc = 8192
Can some one help me?
What is the user connecting during the installation?
Thank you!File DATABASE.R3S contains the following phases in 4.6C SR2. This file is usually same in most releases. This file must be edited befure running with R3SETUP. Here all the phases.
Phases marked with BOLD are not necessary and MUST NOT BE RUNNED.
You have to put "STATUS=OK" line at the end of all these phases by using R3EDIT, SAPPAD or NOTEPAD.
10=DATABASEINSTANCE_NT_MSS
20=DBCOMMONDBENV_NT_MSS
30=CALCRAM_NT_MSS
40=CDSERVERBASE_NT_MSS
50=OSGROUPSAPLOCAL_NT_IND
60=OSGROUPSAPLOCALADMIN_NT_IND
70=OSGROUPSAPGLOBAL_NT_IND
80=OSUSERSIDADM_NT_IND
90=OSUSERSIDADMPASSWD_NT_IND
100=OSUSERSIDADMRIGHTS_NT_IND
110=DBOSUSERMSSXP_NT_MSS
120=DBOSUSERMSSXPPASSWD_NT_MSS
130=GETDBSIZEKEYS_IND_IND
140=DBBUILDTEMPDB_NT_MSS
150=DBBUILD_NT_MSS
160=DBPOSTBUILD_NT_MSS
170=DBPRELOAD_NT_MSS
180=DBMULTISCHEMA_NT_MSS
190=DBDBSLTESTCONNECT_NT_IND
200=DBR3LOADEXECDUMMY_IND_IND
210=DBR3LOADEXEC_NT_MSS
220=DBR3LOADVIEWDUMMY_IND_IND
230=DBR3LOADVIEW_NT_IND
240=DBPOSTLOAD_NT_MSS
250=DBCONFIGURATION_NT_MSS
260=DBPROCEDURES_NT_MSS
270=DBR3LICENSECREATE_NT_MSS
280=DIPGNTAB_NT_IND
290=EXITMNLSSTARTR3_NT_IND
300=RFCRSWBOINI_IND_IND
310=RFCRADDBDIF_IND_IND320=QUERIESFINISHED_NT_IND -
PE 13 download to Windows 64 bit OS came as 32 bit version! ( I tried twice, took 2 hours ). How to get 64 bit version of PE 13 to download?
Open below link and click download now
Adobe - Adobe Photoshop Elements 13 free trial download | Adobe
It will download Adobe Download Assistant, Install it.
From Adobe Download Assistant you can download PSE 13.
Adobe Download Assistant and check and download the correct version of PSE13. for your computer. -
Unable to unzip oralce 11g files in windows(32 bit) xp sp2
Database Installation
i tried to unzip oracle 11g version 2 using 7zip and winzip 15.5..i tried with winrar too...
WHEN I RIGHT CLICK AND TRY EXTRACT HERE OPTION with all the softwares i am getting errors as "UNEXPECTED END OF ARCHIVE","UNABLE TO OPEN THE FILE"..
IF I OPEN THE FILE IN ARCHIVE AND CLICK EXTRACT i get error as "THE ARCHIVE IS IN UNKNOWN FORMAT OR DAMAGED.."
i downloaded 11g version 1 and 2 from oracle site itself..but i faced the same problem with both..
i couldnt extract both the files where as i am able to extract any other files on my computer...
why am i facing problem with only these files????865053 wrote:
Database Installation
i tried to unzip oracle 11g version 2 using 7zip and winzip 15.5..i tried with winrar too...
WHEN I RIGHT CLICK AND TRY EXTRACT HERE OPTION with all the softwares i am getting errors as "UNEXPECTED END OF ARCHIVE","UNABLE TO OPEN THE FILE"..
IF I OPEN THE FILE IN ARCHIVE AND CLICK EXTRACT i get error as "THE ARCHIVE IS IN UNKNOWN FORMAT OR DAMAGED.."
i downloaded 11g version 1 and 2 from oracle site itself..but i faced the same problem with both..
i couldnt extract both the files where as i am able to extract any other files on my computer...
why am i facing problem with only these files????Oracle Database 11g Release 2 (11.2.0.1.0) for Microsoft Windows (32-bit)
win32_11gR2_database_1of2.zip (1,625,721,289 bytes)
win32_11gR2_database_2of2.zip (631,934,821 bytes)
Directions
1. All files are in the .zip format. There is an unzip utility here if you need one.
2. Download and unzip both files to the same directory.
3. Installation guides and general Oracle Database 11g documentation are here.
4. Review the certification matrix for this product here.
refer the linK:-http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win32soft-098987.html
as mentioned earlier, check size of the download zip file with above mentioned bytes. else try to download again.
while downloading, do not pause the download in the middle and continue it will corrupt the oracle software.
if you use any download manager dont pause/stop.
Good Luck. -
Windows 64 bit cannot be installed
I Have MacBook Pro Retina display 13 inch dual-core i5 2.4GHz 8GB 256GB, When i'm installing windows 7 on Bootcamp show message error windows 64 bit cannot be installed i need to advise me a solution to this case ???? Mac OSX 10.9.1
Win 7 and 8 require a min of 20Gb but this assumes a minimum install and no other software.
If youre looking at adding other stuff then you need to increase it.
When you say youve selected a private space did you follow the correct proceedure to install by using the bootcamp assistant. Think about file format for the drive before you start as you have a couple of options.
NTFS are what is normally required by Windows but this will prevent you copying files too/from OSX
FAT will allow you to copy files between windows OSX
From memory I used FAT and then OSX/Windows converted it to NTFS during the process so I dont think you can ultimately use the drive from OSX unless you use a Virtual set up.
You may have set the drive up wrong ie set it up for 32bit or a wrong format for the 64bit windows system to use
Have a look at these links:
http://www.wikihow.com/Use-Boot-Camp
http://twocanoes.com/winclone/support/create-a-boot-camp-partition -
iTunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times. Please help.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
Entry point not found - iTunes 10.7 for Windows (64-bit) reinstall
After ignoring iTunes update prompts for about 2 years, I recently tried updating to the latest version (12.1) without success. After searching for solutions to this problem online, I decided to uninstall iTunes and try reverting back to iTunes 10.7 for Windows 64-bit (on my Windows Vista laptop).
At this point I have installed, repaired, uninstalled, reinstalled, and repaired the 10.7 version and am still unable to access iTunes. When I try to launch iTunes, I get the following error messages:
"iTunes.exe - Entry Point Not Found
The procedure entry point CMTimeRangeMakeFromDictionary could not be located in the dynamic link library CoreMedia.dll."
When I click OK, I then get:
"iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)"
(As I stated above, reinstalling hasn't worked!)
In my online troubleshooting searches, I've found posts regarding entry point issues but none with "CMTimeRangeMakeFromDictionary" or "CoreMedia.dll" in them. I'm unsure what to do next (should I attempt iTunes 12.1 again?), and my biggest concern is that I will somehow lose all my music. Any help would be greatly appreciated! Thank youEntry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2
Maybe you are looking for
-
Cannot Connect to iTunes OR Download New Copy. Please Help!
I was trying to update my account information earlier today when I noticed I couldn't log into my account info or the iTunes store. I figured it was a temporary problem, but no luck as of a moment ago. I get an error message saying the session timed
-
Automatic Scheduling of Transports
Hi, Is there a way in NWDI for automating the released transports from DEV to QA on a schedule? And also control them from QA to Prod? -Aarthi
-
Copy captions as well as pictures to flashdrive from macbook air?
I note captions under my pictures in iphotos under events. As in date, function,etc. how do you highlight that part so as it copies with the picture. Picture copies and caption section only says getattachment.espx
-
Error 500: org.springframework.dao.IncorrectResultSizeDataA
I am getting the following error after having tried to set up webdav and/or file Resource Drivers. I am still getting it after I have disabled them. org.springframework.dao.IncorrectResultSizeDataAcc essException: Incorrect result size: expected 1, a
-
Hello all! I thought I would run this by everyone and see what happens. We are trying to set up Solarwinds patch manager. When we try to synchronize the server it works perfectly. It will read if new update are available and try to download them. So