Windows 7 64-bit hangs completely after some minut...
Hi all,
My Windows 7 64-bit machine hangs completely after some minutes using Nokia Suite 3.3.89 connected with a E72 through USB cable.
When connecting, everything goes fine and I can usually synchronize data successfully between the E72 and computer. I can also connect to Internet successfully through the E72 modem.
However, after some minutes (usually 4-5), the computer hangs completely, with the screen frozen and beign completely irresponsive to any mouse or key input.
The only way to unlock it is to press the computer On/Off key and restart it completely.
Has anybody experienced this issue?
Thanks
Hi Roberto,
I too faced the same problem and I too use Windows 7 X64 bit, when ever i open Nokia Suite and maximize it, my screen turns completely Grey/White and nothing works including ctrl+alt+del and I would need to force reboot using the reset button this is really frustrating! I have already checked the display drivers, updated drivers but again same issue and I reinstalled nokia suite as per your suggestion in the above thread but no use please suggest a permanent solution for this!
Thanks & Regards,
Pradeep
Similar Messages
-
Site does not load after some minutes of creation or after restart the server
Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, ConfiguringHi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring -
Photoshop Elements 13 running in Windows 8.1 hangs immediately after starting
Photoshop Elements 13 running in Windows 8.1 hangs immediately after starting. Has to be shut down by Task Manger. Task Manger shows that it is still using some CPU. Ran Procmon (part of Sysinternals) which shows that it is in a loop. Stack trace shows it is executing code in AMTValidateProductLicense.dll. Started happening about a month after I installed PSE. Everything used to work fine at first. Have tried going back to an old image of Win 8.1 on a different hard drive, otherwise same computer, and installed PSE 13 from DVD. That installation never worked, it aways hangs. If I do a clean boot, it sometimes runs long enough for me to click on a menu item and then hangs the same way. And, yes I bought a new DVD to run on this computer, never been used in any other way. Any ideas how I can get PSE running properly?
It really doesn't look like a licensing issue, it seems to be code in the area of license validation that isn't working.
I took your suggestion and initiated a couple of chat sessions with support, but so far still no luck. The latest session with Neeraj seemed to be promising. After some investigation he asked to reinstall. First he uninstalled with Revo Uninstall, which seemed to be pretty thorough. That required a restart, so he set things up to restore his conference session and took my phone number. Unfortunately I guess his connection didn't come back. When I didn't hear from him after a couple of hours I tried installing Photoshop and Premiere myself. As before, Premiere works and Photoshop doesn't. When I start Photoshop, the window opens and for a couple of seconds menus open when I click on them. Then the window freezes and I have to use Task Manager to kill it. So basically, I've tried several things but I'm back where I've been all along, I can't get Photoshop to work. I'd really appreciate suggestions about something else to try.
I wish someone at Adobe was interested in the Process Monitor traces I've made, because I'm sure someone who knows the code would be able to figure out pretty quickly what's happening. Is it trying to read a file that's not there, failing to write a file, failing to make an internet connection or what? It really shouldn't be this hard to figure out. -
Just upgraded to latest iOS and my iPad does not come back up - the following appeared as the first thing after turning back on. It displays a line from the power/USB connector to an iTunes logo and then goes off and after some minutes comes back on. I cannot reset it or anything else. It is completely non-functional.
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom -
I cannot type in firefox nowhere after some minutes
after some minutes i cannot write in any field,
spacebar, facebook, nowhere
I must restart firefox in order to be fix it!Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/Troubleshooting+plugins -
Why does my HTC One hang up after 30 minutes?
I am frequently on my phone for conferernce calls for work, and my phone automatically hangs up after 30 minutes. Any ideas?
Thanks for the details, docmom! I completely understand the need of reliable service at all times. One dropped call is one too many, allow us to figure it out! Does this happen in all locations? What is your zip code? Does this happen only on a conference call? Share details so that I can further assist.
Thank you,
LenaA_VZW
Follow us on Twitter @VZWSupport -
IPad: After some minutes of playing a video screen turns green
After some minutes of playing a video from an iPad the screen turns green, what can I do?
I use the private release function of iTunes with an iPad (iOS 4.3.2) connected via wireless lan with my Mac (21,5", OS X 10.6.7).
Many thanks in advance!
Johnski-NNeed much more information than this. What kind of movie? Is it from iTunes or a legitimate provider of movies? Or is it something else?
-
I want to use a FM radio app to Airplay music through my Apple TV (by using the synchronizing function). Works, but after some minutes, the Airplay audio output setting switches back to iPad. Why? Solution?
Why don't use iTunes? Because this just needs to many handling in order to get it where i want it (in general, this whole idea of doing everything online just works likes... ). An app is easier (that's why it is invented).Hey AKfishgirl,
Thanks for the question. The common variable here is your Wi-Fi router. Let’s check to see if the commonly used ports are being blocked by a firewall on your router:
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Well known TCP and UDP ports used by Apple software products
http://support.apple.com/kb/HT6175
Thanks,
Matt M. -
my iphone 5 camera suddenly stop working and the shutter dont open after some minutes shutter open with some dolor stripes and it takes 2 or 3 days and again start working normaly it happens every 3 weeks.is this a soft ware problem??
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom -
We are using a DHCP Server that is sending secure (GSS-TSIG based) dynamic updates to Microsoft DNS.
After successful TKEY negotiation, the dynamic updates are accepted/success.
Established context is valid for more than 10hours in client side(Based on InitializeSecurityContext output parameter ptsExpiry
http://msdn.microsoft.com/en-us/library/windows/desktop/aa375507%28v=vs.85%29.aspx)
But, when we try to use the same TKEY name ( the established context is not expired) we are getting "Query Refused error" after some time say 8-10 minutes. Is there any transaction timeout after which client should not reuse the TKEY
context established ? Whether Microsoft DNS supports TKEY RR with mode 5 ( Delete Security Context/ Key Deletion ) so that client will delete and establish a new context for further DNS updates. Also why BADNAME/BADKEY error is not returned while refusing
the updates?
As per the RFC 3645,
<RFC snip>
4.2.1. Terminating a Context
A server can terminate any established context at any time. The
server MAY hint to the client that the context is being deleted by
including a TKEY RR in a response with the Mode field set to 5, i.e.,
"key deletion" [RFC2930]. An active context is deleted by calling
GSS_Delete_sec_context providing the associated context_handle.
</RFC Snip>
1. Configured Forward Zone aswin.com
2. Not configured Reverse Zone, so that reverse updates get NOT AUTH ( just to test error case )
3. TKEY negotiation is successful.
4. Sent 2 updates say at 19:52 one forward and reverse updates. Forward update is success, Reverse update failed due to reverse zone not configured, which is expected.
5. Sent 2 updates say at 19:55 using the previously established key, Forward update is success, Reverse update failed due to reverse zone not configured, which is expected.
6. Sent 2 updates say at 20:01(approximately after 5 minutes), Forward Dynamic update failed with Query Refused. Until new TKEY negotiation is done all updates are failed with Query Refused. Why the same key could not be used for 10 hours(based on
Initialize security context output value). Is there any way to find how long key can be reused ?
Statisctics details from Microsoft DNS
dnscmd localhost /statistics 00000100
DNS Server localhost statistics:
Packet Dynamic Update:
Updates Received = 2
Forwarded = 0
Empty (PreCon Only) = 0
NoOps (Dups) = 0
Rejected = 1
Completed = 1
Timed Out = 0
In Queue = 0
Updates Rejected = 1
FormError = 0
NameError = 0
NotImpl = 0 (Non-Update Zone)
Refused = 0
NonSecure Packet = 0
AccessDenied = 0
YxDomain = 0
YxRRSet = 0
NxRRSet = 0
NotAuth = 1
NotZone = 0
Queue
Queued = 1
Retried = 0
Timeout = 0
In Queue = 0
Secure Update
Success = 1
Continue = 0
Failure = 0
DS Write Failure = 0
Update Forwarding
Forwards = 0
TCP Forwards = 0
Responses = 0
Timed Out = 0
In Queue = 0
Update Types:
ZERO = 0
A = 0
NS = 0
CNAME = 0
SOA = 0
MB = 0
MG = 0
MR = 0
NULL = 0
WKS = 0
PTR = 0
HINFO = 0
MINFO = 0
MX = 0
TXT = 0
RP = 0
AFSDB = 0
X25 = 0
ISDN = 0
RT = 0
NSAP = 0
NSAPPTR = 0
SIG = 0
KEY = 0
PX = 0
GPOS = 0
AAAA = 0
LOC = 0
NXT = 0
EID = 0
NIMLOC = 0
SRV = 0
ATMA = 0
NAPTR = 0
KX = 0
CERT = 0
A6 = 0
Unknown = 0
Mixed = 1
Command completed successfully.
dnscmd localhost /statistics 00000100
DNS Server localhost statistics:
Packet Dynamic Update:
Updates Received = 31
Forwarded = 0
Empty (PreCon Only) = 0
NoOps (Dups) = 24
Rejected = 3
Completed = 4
Timed Out = 0
In Queue = 0
Updates Rejected = 3
FormError = 0
NameError = 0
NotImpl = 0 (Non-Update Zone)
Refused = 1
NonSecure Packet = 0
AccessDenied = 0
YxDomain = 0
YxRRSet = 0
NxRRSet = 0
NotAuth = 2
NotZone = 0
Queue
Queued = 29
Retried = 0
Timeout = 0
In Queue = 0
Secure Update
Success = 2
Continue = 0
Failure = 1
DS Write Failure = 0
Update Forwarding
Forwards = 0
TCP Forwards = 0
Responses = 0
Timed Out = 0
In Queue = 0
Update Types:
ZERO = 0
A = 4
NS = 0
CNAME = 1
SOA = 0
MB = 0
MG = 0
MR = 0
NULL = 0
WKS = 0
PTR = 0
HINFO = 0
MINFO = 0
MX = 0
TXT = 0
RP = 0
AFSDB = 0
X25 = 0
ISDN = 0
RT = 0
NSAP = 0
NSAPPTR = 0
SIG = 0
KEY = 0
PX = 0
GPOS = 0
AAAA = 0
LOC = 0
NXT = 0
EID = 0
NIMLOC = 0
SRV = 21
ATMA = 0
NAPTR = 0
KX = 0
CERT = 0
A6 = 0
Unknown = 0
Mixed = 3
Command completed successfully.
C:\Users\Administrator>
-Thanks,
Devi.UHi Devi,
Based on this issue, would you please provide the netmon trace to us? I suggest taking a look at this packet. Moreover, please let me know if you tired to update the DNS record via DHCP manually.
Thank you.
Best regards,
Steven Song
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
ITunes 11.2 for Windows (64-bit) hangs when opened
Hi
I recently updated to iTunes 11.2 for Windows (64-bit) on both my PC & laptop which both run Windows 7 and are apart from this problem with Itunes are very stable.
After installing the updates, each time I try to launch Itunes the program will open to show the main window but then I get the following:
I cannot make any of the functions respond (via mouse or tabbing)
The "timer circle" (Same as Apples "egg timer I guess) just runs & runs.
Eventually after say 20 mins, I get the standard Windows message about Itunes has stopped.
I then have to exit via this message window, whcih closes the Itunes program down.
I cannot find any conflicts with spyware etc and all other programs etc are running as normal, any ideas if this is a bug in iTunes 11.2 for Windows (64-bit)? Or is there something else I can try?
I have tried completely uninstalling & reinstalling the software, but that failed too (and I do not know whow to find a previous release of Itunes to try again!)
Thanks in advance for your assistance.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Why does windows media player cut off after 4 minutes?
I use safari and like to listen to some radio from the internet that uses windows media player on my G5. I updated the media player recently and now it quits after four minutes no matter what media is playing. I do not have windows media on my other machine and VLC opens automatically whenever I click on a stream in my browser... and it never quits or has any problems and is remarkably faster than the windows player. How do I change the settings in Safari so that it will use VLC to automatically open any of those media files instead of media player??
I did download Flip4mac but it does not seem to be helping!!
thanks
ktYour More system details list show the WMP plugin (np-mswmp), so that should be working.
See:
* http://kb.mozillazine.org/Testing_plugins
* http://www.vdat.com/techsupport/windowstest.asp -
Able to ssh the firewall from remote location but after some time when command is excuted.the firewall hangs.
Below is the version details
Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 7.1(1)52
Compiled on Fri 20-May-11 16:00 by builders
System image file is "disk0:/asa825-k8.bin"
Config file at boot was "startup-config"
Hardware: ASA5520, 2048 MB RAM, CPU Pentium 4 Celeron 2000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash Firmware Hub @ 0xffe00000, 1024KBHi Jesu,
Thanks for reply
i can not confiure and test telnet as i manage this firewall remotely(over internet by ssh).To do that i have to create Ipsec VPN.
One more this when this event occur i can not even ping my firewall.(request time out )
i have send the show tech output to your mail id
output of other command
show resource usage
Resource Current Peak Limit Denied Context
SSH 2 2 5 0 System
Conns 2 73 280000 0 System
Hosts 2 22 N/A 0 System
show ssh sessions
SID Client IP Version Mode Encryption Hmac State Username
0 202.x.202.x 2.0 IN aes256-cbc sha1 SessionStarted xxxx
OUT aes256-cbc sha1 SessionStarted xxxx
1 202.x.202.x 2.0 IN aes256-cbc sha1 SessionStarted xxxx
OUT aes256-cbc sha1 SessionStarted xxxx
show asp table socket
Protocol Socket Local Address Foreign Address State
SSL 0000251f 192.168.1.1:443 0.0.0.0:* LISTEN
SSL 00005d0f 14.x.90.x:443 0.0.0.0:* LISTEN
TCP 0000ce6f 14.x.90.x:22 0.0.0.0:* LISTEN
TCP 001aee28 14.x.90.x:22 202.x.202.x:50318 ESTAB
TCP 001b6a08 14.x.90x:.22 202.x.202.x:50512 ESTAB
sh memory
Free memory: 1882253576 bytes (88%)
Used memory: 265230072 bytes (12%)
Total memory: 2147483648 bytes (100%)
Regards,
Prashant -
Premiere Elements 11 (Windows 64 bit): Frequent glitches after rendering
I am currently trying to render around 20 videos, around 12 hours in total duration (video lengths vary from 5 minutes to 105 minutes).
Unfortunately, about 50% of the time, when i watch a newly rendered video, there will be some sort of graphical glitch. For example, a clip will be missing from start to finish, replaced with a blank beige screen (definitely not in the timeline), or a random graphical glitch where some of the visuals become warped for a couple of a seconds.
Here is a screen shot of a glitch
And here is a screen shot of my render settings:
This is costing me a lot of time and effort.
Is there anything I can do to reduce the frequency of these errors, or scan videos for errors without having to watch them closely manually??
thanks.I have an ATI/AMD FirePro v4800 1GB GDDR5 with the latest drivers for this card (8.982.8.3)
Is my video card not compatible?
this slow redraw of the timeline happened way before
and everytime a new driver version came up I had installed it but that didn't change anything.
Only with aero disabled I would enjoy a fast timeline scrolling in windows 7. (now, not possible in windows 8 pro)
Bill how can you explain this? Same video card and everytime with the SAME NEW drivers, aero on=slow timeline, aero off=fast timeline!
Is there some kind of a fix that we can always wait from our graphics card companies to include to new drivers??? (for how long???)
or maybe is it all up to Adobe and its own programme?
Are we all supposed to have old video display drivers?
Can someone make some kind of a poll for people who have this problem to vote to see where this problem apears, in which configurations, in which graphics cards? (assuming they have latest drivers)
so we all finally know what/where is the problem.
I love the premiere elements series and thats why I want this to be solved. -
Wav play in my game but stops after some minutes
I play wav files in my game and all is ok during first minutes, but then sound stops and game continue.
Some idea?
It happen in all my games :(:(:(
Test phone: nokia 6600
Many thanksHessiess wrote:
After the fan stops, can you re start it again by physically spinning the blades? If so, and as it is reasonably old, I would recommend replacing the fan.
To test with a different OS, you could use a different live CD, i.e. Ubuntu/Fedora/Knoppix etx.
Hi Hessiess. I tried that as well, the fan does not restart even if spinned by hand. Looks like there's no power flowing in it!
The fan is just two years old, and it used to spin at an average of 2500 rpms, so the end of life should be far away. I keep the internals clean with compressed air, no dust bunnies anywhere
I'll be testing with a live distro, thanks for the suggestion.
Cheers.
Maybe you are looking for
-
How to clean project from comman line ?
How to clean project from comman line ? I would like to invoke the same functionality as in Flex Builder Project -> clean... -> clean all projects... but from command line is it possible ?
-
Hello, today I have a problem with image url. I wanted Image to change when mouse dragged over it. But nothing happened. Any ideas? def maxIco: ImageView = ImageView{ image: Image{ url: "{__DIR__}ikony/max.png" onMouseDragged: function(event: MouseEv
-
Everything is just running completely slow and it was not like this. I do not know what to do at all, please help. Thank you.
-
Accessing NetStorage via WebDAV from Windows 7
Until last week we were running Netware 6.5 SP8. I was aware that accessing NetStorage via WebDAV (using Microsoft Web Folders) does not work on Windows 7. Now I migrated the server to OES 11 SP2 and I decided to re-investigate the issue. Currently,
-
How to rectify the error in running the apk file in emulator.
hi I have developed the air based android application and got .apk file.I installed the .apk file in emulator which is version 2.3.1 android but i got the error when running it as "The Application HelloWorld Has Stopped Unexpectedly. Please Try Agai