Windows 7 64 bit / HPE-010be Computer does not start up out of 'stand-by' mode

I had this problem several times since I bought this system last month.
I leave the PC normally in stand-by and then wake my system up by pushing a key on the keyboard.
In the case of the problem, I push a key on the keyboard, the system starts and I hear the fan and the drive running, but nothin appears on the screen for minutes.
The only way to get out is to force a full restart by pushing the power button for long time.
One thing I had one time that I did not force the full restart but waited for longer time. Half an our later I came back to my system and saw a full restart had happened.
In the log, I see:
Windows Operating System; Versie: 6.1.7600.16385; Id: 41; Gebeurtenisbron: Microsoft-Windows-Kernel-Power;
Msoft relates this log-issue to bad power-off situation, but honestly all the cases I've had I cannot remember issues. It could be that my computer is causing such situations by itselve.
Anyone had this problem? Solutions?
This question was solved.
View Solution.

Patrick,
What BIOS level are you running on your PC? What model NVIDIA video card are you using? If it's the 220 then try this HP NVIDIA video card update.
Try this procedure:
Unplug the PC and open it up.Clean out all the dust. Carefully remove and replace all the cables going to the motherboard one at a time. Do the same for the memory dimms and the video and sound cards if you have any. Plug your PC back in a give it a go.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

Hi, I have installed VMware Fusion to switch to windows. The game I played is now frozen and even turning off the computer does not get it out of the 'frozen' mode. What can I do?

Hi, I have installed VMware Fusion to switch between Mac and Windows. It worked fine until I installed and played a game (Atlantis). Now the screen in frozen and even turning off the computer does not help. Does anybody have an idea what to do?

Try the remaining items of:
iOS: Not responding or does not turn on
If not successful, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My computer does not start download osx mountain lion what should I do, My computer does not start download osx mountain lion what should I do

My computer does not start download osx mountain lion what should I do, My computer does not start download osx mountain lion what should I do

What's installed on your computer? If you don't have Snow Leopard 10.6.6 or later then you cannot get Lion. If you already have Lion installed then you cannot re-download from the App Store until you have reinstalled Snow Leopard.

My computer does not start . It shows an envelope with a question mark. Can anyone tell me what to do?

My computer does not start I turn it on and it shows an envelope with a question mark.
Can anyone tell me how to fix it.

Troubleshooting: My computer won't turn on
Mac doesn't boot

Computer does not start up when connected to My Book 4TB

When I connect MY Book (4TB) to my computer before turning it on, my computer does not start up. I only get a black screen. If I disconnect the My Book and then first start up my computer, I am able to plug in My Book and read all the files, backup, etc. Why won't the computer start when My Book is connected???

??? Wrong Forum? This is for "My Book Live" vs "My Book"... How to tell? Easy, MBL (NAS) does not have USB, MB (USB HD) does...

I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?, I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?

I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?, I Have a folder with an interrogation mark blinking and the computer does not start. Anybody?

Here is some information and troubleshooting steps from Apple:
http://support.apple.com/kb/TS1440

I have a mac book pro. It is 3 years old. when I push the button to turn on the computer, it does not start. The little light comes on, but the computer does not start up

I have a macbook pro. It is three years old. It has been working perfectly fine. However, as of yesterday, whenever I push the "on" button, the computer does not turn on. The little light comes on indicating that the computer has started, but there is nothing on the computer screen, and it does not make the usually noise that it makes when it cycles on.
Any suggestions?

Check the battery status to make sure it has a full charge (and that the charger is working). Then make sure the screen backlight is turned up.
If the backlight is up then, try forcing the machine to shutdown (hold the power button for 5 - 10 seconds). Then restart the computer(listen for the start up chime).
If the computer does start up and you still cannot see anything reset the PRAM by forcing the machine to shut down (hold power button as before), then press the power button and start holding the key combo
<Command>+<Option>+p+r
until you hear the start up chime two or three times, then release the keys and allow to boot

My computer does not start up right away after I close the top... Is my hard drive going bad? Help please!

I typically just close my computer when I'm done with it, instead of putting it to sleep or logging off. Recently, when I open it back up, it does not start right away. I have to press the power button half a dozen times before it starts. HELP!!

annie1977-
Greetings and welcome.
Try booting from the system install CD/DVD by putting the disk in the drive and starting up while holding down the c key.
After boot-up find the Disk Utility, either on the desktop or under the Apple menu. Select your startup drive and the repair permissions on that drive. See if that helps.
Luck-
-DaddyPaycheck

My computer does not start?

I turn on my computer mac pro and it does not start...

Portables that will not Power on.
http://support.apple.com/kb/TS1365
Go step by step.
Note: Steps 5 and 6
Reset SMC.
http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best.

Computer does not start up

My macbook does not start and a question mark sign is flashed. It does not go beyond that

The question mark means it's not seeing a bootable installation of OSX on startup. Can mean a number of things. Firstly, try starting up holding down the option key to invoke the startup manager. Does it see your HD?
If no, startup with the installation CD in the drive and hold the 'C' key down. It will take a bit longer to boot from the disk, but once done, you'll need to launch Disk Utility and run the Repair Disk routine. Post back.

Computer does not start

Dear Team, Suddenly my PC shut down (it was running without AC, with quite high battery level though). It was running on "power saver mode" so even if the battery level was low, it should have gone to hibernate. When I connect the AC, the LED does not light at all. (with or without battery either) Went through the troubleshooting steps (hard reset, another AC) still does not charge and does not start up at all. No LED light either that worries me the most! I clean the dust out of the fan regurarly, using arctic mx4 thermal grease for CPU and video card, I really take care about my PC, so no idea what happened? The only odd thing what I noticed prior to this, that neither of my CTRL keys was working Please help! Any kind assist would be greatly apperciated! Cheers!

Kindly connect the system to direct power and check the issue is not there.
If it works fine then you should it could issue with power bar as it is not passing the complete power.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HP Pavilion 15-n253sv Notebook Computer does not start (Windows 8)

Hello, yesterday my laptop shut down and since then it cannot start.
Even with repair/install disks of windows (8.1) or Linux, it recognises the disk, gets to the first menu (of the Linux disk) or the press any key to boot from cd/dvd (on windows disk) but then it get to a blank screen and does nothing else.
I run the System tests (quick and extensive) and both found (pretty quickly I might add) an error on the HDD (I think).
the error Id istrk03-74j79q-mfpv6j-60wc03 but I cannot find any reference of that on the web.
I suppose that since it is a hardware issue I will have to take it to HP support, the main thing that concerns me (as you might have already guested) is if I might lose any files.
Thank you in advance
Orestes

Yes, I just took it to a service support and they told me just that, if I want to keep my files I would have to pay extra.
The live cd solution was my first thought too but (as I wrote at my original post) it doesn't seem to be hopeful either.
It gets to the first stage of the disks (boot menu of linux live disk/press any key to boot from disk on the windows disk) and then it gets to blank screen doing nothing as well, also the optical drive stopped reading the disk (that is how I figure that's doing nothing). :-(
Anyway thank you for your good will but I suppose I would have to pay for the recovery if I do not want to void my warranty.
PS:By the way and since you mentioned it, the issue with the bootable disks can it be connected with the hard disk failure?

Computer does not start up properly

The Battery exploded in my older macbook (not a violent explosion, but it seemed to push out and was no longer flush with the bottom of the notebook, so I removed it. I plugged in the computer with the power adapter without a battery and it actually started once normally. I did a shutdown and since then, when I try to start it the white power light comes on, the sound sounds and the screen turns light grey, after about 20 seconds or so, the grey apple appears on the screen with the turning wheel symbol, after about 20 turns of the wheel, the screen goes black. Well, this time it started ok. The battery symbol in the toolbar has an X in it, obviously as it has not battery installed. Is it ok to use the computer like this?
Secondly, I purchased a battery replacement for this unit, when I tried it installed, it did not recognise the battery, it is the A1185 model number and fit perfectly in the slot. Any ideas on this?
Many thanks,
Rene

I found your thread very helpful. I have a 2009 mac pro 3,1 that seems to be doing similar things. It was working fine then occasionally the screen would flicker and then freeze the system. had to power off to get out of it. Now it won't boot. I get purple and white vertical lines and the apple with the pinwheel. the pinwheel stops after a while and thats it. i tried booting from the cd and get to the harware test but the screen is split left and right. really unreadable. i suspect the graphics card (geforce ) so i tried booting without the card installed. i believe it still did not complete the boot. my question is should i be able to boot without a graphics card installed? any thoughts or advice would be appreciated.
jim

New ram - computer does not start up

Hi all,
I have a first gen iMac G5 (1.8 Ghz, 250 GB Hard drive, 1 G Ram). This RAM was installed:
DIMM0/J4000:
Size: 1 GB
Type: DDR SDRAM
Speed: PC2700U-25330
Status: OK
I wanted to upgrade to 2 GB, so I checked around, everywhere it says I should have PC3200 RAM sticks, even on the Apple website. Same at the store (a kind of mall specializing in Apple stuff), they sold me 2 GB of DDR SDRAM PC3200. When I installed them, the computer would start up but get stuck on the little gear wheel, until the screen went gray and a message appeared in 4 languages saying that I have to restart the computer.
So then I put the old RAM stick back in, but same thing happens - computer would start up, get stuck on the little gear wheel, until the screen went gray and a message appeared in 4 languages saying that I have to restart the computer.
Any ideas what I could do? Or did I kill the computer for good?
Any help is much appreciated.

Hi again,
so, after a bit of struggle (mainly with the hard drive casing), I managed to switch out the hard drive for a new one and installed the new ram. Everything seems to work fine so far. Only difference so far is that the fans don't seem to come nearly as much as before. Things seem warm, but not worrisome hot, so I wanted to check if these temps are ok or if I need to be concerned:
HD 52C/126F
CPU 65C/153F
Hard Drive 49C/121F
Both Disk Utility and Disk Warrior report no problems.
If these temps are too high, how can I rev up the fans a bit?
Thanks for the help!

Windows 7 pro. refurbished computer does not recognize me as computer administrater.

I bought a refurbished Windows 7. The person had wiped the computer clean, but when I transferred files and turned it on the computer still registered me as living in Baldwin MO. For example-
The weather map on Att was set as Baldwin MO for the default with no way to change it. I contacted ATT.
Any store site would say my store is in South County, I will reset it, but it will go back to the previous owners settings.
Looking on a map of MO it would say my closet center is Jefferson city. I live an hour north.
I finally got hold of a person at ATT that said there is no way to change the information, that the setting have been changed to prevent this.
Am I stuck with windows 7 registering the previous owners information, and not able to up-date it.
This is beginning to affect my work giving me clients in the wrong area.

Hi,
I think the seller just delete personal data or some programs. However, some private information still store in registry. I recommend you to create your own account and login with your account.
http://windows.microsoft.com/en-us/windows/create-user-account#create-user-account=windows-7
Andy Altmann
TechNet Community Support

Windows 7 64 bit / HPE-010be Computer does not start up out of 'stand-by' mode

Similar Messages

Maybe you are looking for