Windows 7 64 Bit install on Imac 2010 Using Boot Camp PLease Help

OK so I am trying to install my 64 bit windows 7 using bootcamp on my imac 2010 i just bought it today. I have created the partition and the computer restarted and went to windows 7 setup however it then told me it could not find any drivers for the cd/dvd. I think the drivers on the OS X cd but i cant eject the windows 7 cd to put the OS X cd in because I am in windows 7 setup and the eject button wont work. Does anyone have any suggestions on how to proceed? I would Really appreciate it thank you.

It sounds that the Microsoft Installer does not like the optical drive inside of your Mac.
Do you have access to an external DVD drive?
If yes, try the Windows 7 install with an external DVD drive.
If no, try to install Windows 7 from a USB drive.
Source 1:
http://technet.microsoft.com/en-us/magazine/dd535816.aspx
Source 2:
http://social.technet.microsoft.com/wiki/contents/articles/how-to-deploy-windows -7-from-a-usb-drive.aspx
If you don't have an external DVD drive or a USB drive that is 8GB or larger, you might want to consider borrowing or buying one.

Similar Messages

Is it possilbe to install Windows 7 in an external drive using Boot Camp

Hi,
Is it possilbe to install Windows 7 in an external drive using Boot Camp? If yes, can you someone show me or direct me where I can find more info?
Thanks a lot

You're welcome anytime.
Microsoft doesn't make it easy sometimes
As for the harddisk it surely is possible.
iFixit http://www.ifixit.com/Browse/MacBook jas repair manuals and/or MacSales http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/SATA/DIY/ with videos on how-to.
Stefan

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?

Friends, MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New MB Pro with OSX 10.6 – current on all updates. I successfully installed rEFit. I used Boot Camp to install Win 7. All was great. Then installed debian 6. Somehow after the debian i

MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New with OSX 10.6 – current on all updates.
I successfully installed rEFit. I used Boot Camp to install Win 7. All was great.
Then installed debian 6. Somehow after the debian install and restart (I know this sounds crazy) but I am now reduced to Win 7 only. rEFit is not present when rebooting nor is OSX or debian. Further, I am unable to force the install DVD to launch when rebooting, by holding C, D or F8. The Option key brings me to the grey screen with a padlock. I have attempted the root and local pw- no go. Restart holding D takes me to the windows boot manager. I have attempted several options within the Advanced Options; including – Repair Your computer, safe mode and “last known good config,” All of which did nothing.
I can see all my OSX files within win7. I tried to install the OSX within windows. Ya right, that did nothing..
I only desire to get back to OSX...
What are my options??

Yes, you royally hosed up your machine.
You should first try to get your files off, any way you can to a external drive.
Your going to need to hold c and boot from the disk that came with your computer and a couple of screens in under the menu is a option for Disk Utility.
Select your drive and Erase with Security Option Zero, format the drive HFS+ Journaled and when that's finished (about a hour or so) then quit and install OS X from the installer.
I hope this works, but I suspect it won't. Others have hosed their machines trying to use a Linux disk without proper partition formatting too.
Another option might be to use another Mac to c boot off the Snow Leopard disk and install OS X onto a external drive, take that to the problem Mac and try holding option and booting off of it to erase your internal drive.
You could replace the drive.
frederick s wrote:
The Option key brings me to the grey screen with a padlock.
Is this holding option while booting?
There was someone else around here who hosed their Mac with a Linux disk too. Try to find it.

I had windows 7 (32bit) and decided to use boot camp but i forgot to download the latest support software from apple and now i cant find any support softwares please help..i am using mac book pro

I had windows 7 (32bit) and decided to use boot camp but i forgot to download the latest support software from apple and now i cant find any support softwares please help..i am using mac book pro

Try the Boot Camp Assistant when you are in OS X and download those and follow the directions in BCA utility.
Then look up the Boot Camp forum. I suspect you thought this was MBP related forum, it is for 65 lb tower model (and well the new "nMP Late 2013 Mac Pro" http://www.apple.com/support/macpro/
Boot Camp
There is a support page too
http://www.apple.com/support/bootcamp

[HELP] Installing Windows 7 on MBP by USB using Boot Camp

Hello!
Im using boot camp to try to Install windows 7 on my MBP. The problem is my cd/dvd driver is broken and I cant use DVD to boot from. I tryed to install by USB but when Im about to restart and boot try to boot the windows that I installed on the USB it says: 'No bootable device -- insert boot disk and press any key'
I have read that Apple changed in boot camp that if you have a DVD you cant use USB function to boot from in USB. I have fixed this problem by using this method from a video in youtube: http://www.youtube.com/watch?annotation_id=annotation_587318&feature=iv&src_vid= I3MNnbtfyzs&v=KmHxkahbK-g
But after I changed this I stil get problem when I boot that my laptop dont recognize the USB.
I need a help to solve this problem. Im using a MacBook Pro 13 (late 2011) OS X 10.8.5

I dont have the opportunities to repair my internal optical drive. Im looking for other solutions for this problem, there I can install the windows without the optical drive.

Frozen Windows 7 install at DOS cursor with Boot Camp 5.0

Hello, I am installing windows 7 (32 bit) on a mid 2012 Mac Book Air (13 in) using install version of windows 7 DVD from external superdrive and boot camp 5.0. After boot camp partitions I go to a black screen with blinking DOS cursor and nothing happens, no disc sound, nothing. I have installed windows 7 with older boot camp and macs with no problems. I am running OS 10.8.2
Thanks for any help.

I tried a third time (boot camp requires you to revome the windows partition before you can re-install). For some reason after the third attempt at installing from boot camp it finally worked.
BTW, I am using an apple USB superdrive and I tried the option key to boot from the Windows partition and it went into the dos screen and the error message was no bootable media or something.
Thanks for your help.

Can't install Win 7 from USB with Boot Camp - please help

Hi,
I'm going crazy trying to install Win 7 from a USB using Boot Camp.
I've got a 13" MacBook (Aluminum) with 6GB RAM (trying to get to 8GB, but that's a different issue), 500GB HDD, running 10.7.4.
In the Boot Camp Assistant I want to partition 60GB for the Win 7 drive, but when I click install I get the error: "The installer disc could not be found. Insert your Windows installer disc and wait a few seconds for it to be recognized." However, the USB drive that I used Windows 7 USB/DVD Download Tool in Win XP to create is plugged in. I also have the .iso file on my Mac desktop.
Googling hasn't produced any solution that I can work - most seem to be using Boot Camp assistant 3.0, and I've got 4.0.3 running.
I'd appreciate help, particularly step-by-step instructions that I could follow.
Thanks in advance.

Lion has been out and most threads here deal with 10.7. and BCA 4.0.x
There are problems with burning ISO to DVD etc at anything other than slowest burn speed (2x)
New 2012 models don't have an internal DVD but if you do, then yours does not support a USB-DVD.
So you are running XP now and have Windows XP partition? knowing that the update will need 40GB and that Lion does not support XP.
Look at the other posts I made this morning for some of the FAQ Boot Camp support links.

I want to install windows7 on my 27in iMAC. I have an OEM version of Win7 which is win pro 7, 64 bit english. I will use boot camp to partion the hard drive for a win7 install. Can I use this version for the installation ??

My iMAC is a 2011 3.4 GHz intel i7 based with a 27in display. A year ago, I bought a Microsoft win pro 7 64-bit english OEM OS to install over a newly assembled AMD PC. I never installed it. Now, I want to put it on my iMAC using either Apple Bootcamp or Parallels. The win 7 OEM package has a lot of verbage about using an OEM preinstallation kit (OPK) and that it must be preinstalled on the hard drive. Is it OK to install this win7 version following the Bootcamp instructions.?
K6JPJ

Please post in the Boot Camp (not Bootcamp) forum I'm sure someone there can answer your quesiton if no one here is able to.

Can't install office university 2010 on macbook pro please help me, can't install office university 2010 on macbook pro please help me

cant install microsoft office university 2010 on macbook pro have been verififed but as i insert disk nothing happens try to manually run the disk and error comes up that it cannot run on operating system have i been sold wrong software or am i missing something? please help me

if you've got office for windows, then it won't run...
you need office for MAC...
if that's what you're talking about wrong operating system...

My iMac won't boot up please help

Please help me. My iMac just won't start up. Thank you

Does it try at al, or no sign of anything at all?
Can you boot from your Install Disc holding c key?
Does holding Option or alt key at bootup show any choices?
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214

Intel iMac won't boot up, please help.

Yesterday I downloaded the iPhone 2.1 Software Update, I then lost two thirds of my contacts, I managed to get them back using the Sync System, I then downloaded the Security Update, which failed "Due to an error" and was "put in the Trash". My computer then crashed, I restarted it and now it won't boot up, it gets as far as the White Screen with the Apple Logo on it with the Spinning Bars "loading" icon underneath, it was like that for over an hour last night and I've tried again this morning and it's the same. has my hard drive gone or is there some less (I hope) final reason for this? Is there an equivalent to Windoze safe mode or similar?
Please help urgently.
Thank You

Try this qst... Safe Boot , (holding Shift key down at bootup), off the HD & use Disk Utility from there to Repair Permissions, reboot once more.
If that doesn't help, Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
If we still don't have it, try without a Tiger Disk, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: ** The volume (nameofvolume) appears to be OK  If fsck found issues and has altered, repaired, or fixed anything, it will display this message: *** FILE SYSTEM WAS MODIFIED ***   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), off the HD & use Disk Utility from there to Repair Permissions, reboot once more.

I/O errors with some discs in XP with Boot Camp Please help.

I wasn't sure which forum to post this problem in. I've also asked this question in "Using your Intel-based iMac". It fits in a few categories, so I apologize if I've gotten it wrong.
I tried to install a game (Last Half of Darkness, 2005) yesterday, and with about 1/3 of installation complete, I got this message: An error occurred while trying to copy a file: I/O error 23. I had my choice of abort, retry or ignore. After the 1st error message I chose retry. After a bit more of the installation I got another error message: I/O 1117. I then tried to ignore, that didn't work, so I aborted. I tried to install a second time, and even tried a second copy of the same game, then tried to install the 2007 sequel to Last Half, same error messages. After each attempt at installation, I could not get the drive to eject the disc. I eventually did by restarting in OSX. My iMac is 13 months old. In November I had a similar problem with another game, this one from about 2004. In that case, the game installed, but froze a few minutes into playing. Because I couldn't play, and couldn't eject, without a great deal of time and "spinning" noise, I took the computer to the Apple Store to have them look at it. I figured that if it was 2 months from being out of warranty, I should get it fixed right then. Of course all the messing with it they did showed no drive problems. All other CD or DVDs, either commercial or homemade, music, video or games have installed and run just fine.
An internet search found this: http://support.microsoft.com/kb/891894 I did everything except the clean boot install, and contacting the manufacturer. After changing the transfer mode per these instructions, I could get all of 2/3 of the way through installation before the error messages popped up.
All drivers are up-to-date according to Windows automatic update and Apple update.
This is my 4th Mac, so I have little experience with PC/Windows. Can anyone give me a suggestion as to what I can do to install and play these games? Any help greatly appreciated.
Ruth

I'm moving this up in the queue since I couldn't find a solution on this site, or elsewhere on the net. Any suggestions greatly appreciated.
iMac 2.4 GHz, 24", 3GB ram
Mac OSX 10.5.5
XP Pro SP3 w/Boot Camp
ATI Radeon HD 2600 Pro

Problems with Boot Camp - PLEASE HELP!

I'm having problems with Boot Camp. Here's what's happening. I ran Boot Camp Assistant, partitioning a 32GB BOOTCAMP drive. I insert my copy of XP and start the installation. My MBP restarts and boots into the Windows Setup. I let it run through the initial actions. I press ENTER to proceed, F8 to accept the license agreement, then when I get to the part where I should be able to select the Partition 3 BOOTCAMP drive (as it says in the Apple Boot Camp Manual) there is only a Partition 1 Unknown drive. It is the only drive to choose from and its a C: drive. I can't figure out why after I run boot camp the partitioned drive doesn't appear as an option in the windows installation. Please help!!!
Message was edited by: CarlConti08

Boot into Leo, start Disk Utility and you should see two partitions, your Leo partition and a Fat32 partition of 32GB at the end of the drive.
If not, boot camp didn't create it for some reason. If it is there then check it with DU and make sure its OK.
While your in there give it a name so you can easily identify it in your windows installer.
If there is no partition, create one using Disk Utility at the END if the drive. make sure you create it as a msdos (Fat32) partition and give it a name. The name cannot be more than 11 characters must be comprised of numbers and/or letters (no special characters).
Verify it before exiting DU.
Put in windows install disk, reboot - hold option key after the chime until you see the boot screen - select windows CD to begin install.
Don't forget to install Leo windows drivers after installing windows.
Kj

Unable to install Windows 7 because of missing drivers using Boot Camp

I tried this question in the lap-top section, but nobody could help.
I have an MB Pro with 13" Retina, late 2013, 250 GB SS-disk, 8 GB RAM.
I need a partition with Windows 7 Professional, and I have an ISO with Norwegian Windows 7, service pack 1 (64 bit).
I run the BootCamp assistant to partition my HDD and to generate the USB-disk with Windows and the necessary drivers.
When i try to install Windows the installer asks for a driver for the DVD-drive. I get a message that it cannot find a driver file and tells me to provide one. There is no DVD so that is correct. There is no way I can skip this part, and I must stop the intallation. I have not been able to trace down any dummy-drivers.
I have also tried to do this procedure with a USB-Superdrive attatched, but that did not help.
My problem is that I am not able to complete the Windows 7 installation. I must break it as it wil not continue until I provide the correct DVD-drivers.

Hello everyone,
As the struggle was real, I thought I would also participate in this thread and share my testimonial with you.
For more than a week, I had been attempting to set up Windows 7 x64 on my mid-2014 MacBook Air 13", but to no avail. I was so sick of witnessing the infamous black screen, "no bootable device -- insert boot disk and press any key", or the "select your language" window in the Windows 7 PE with no keyboard nor mouse alive, that I had almost given up on it all.
But that was before I came across the present thread. I diligently applied your procedure and IT WORKED LIKE MAGIC
My specs:
- Mid-2014 MacBook Air 13" with pre-installed Mac OS 10.9 (Mavericks)
- Windows 7 x64 Home Premium ISO file
- The most basic USB 2.0 flashdrive one can get
- (Note: I did not have rEFIt installed)
You must be some kind of wizard. I signed up just to upvote this, no kidding!
I sincerely wish this post gets the visibility it deserves.
Thank you so much!
Cheers,
tm

Windows 7 64 Bit install on Imac 2010 Using Boot Camp PLease Help

Similar Messages

Maybe you are looking for