Windows 7 64 bit on Mac Pro Ver 1.1 installation options!

Hi All, There seems to be a lot of concern that Win 7 wont run on MP V:1.1. I have this MP and do want to install Win 7 on it.
My Spec is as follows:
Mac Pro (2 x 2.66GHz Dual Core Intel Xeon) Ver 1.1. HD4870 Graphics Card and a 24" Dell U2410 Display. My O/S is Lion.
Question: Will it work installed using Lion's Boot Camp on a freshly formated hard drive?
Question. If Boot Camp is the problem can I install Windows 7 as a totally independent O/S on freshly formated hard drive on my Mac Pro by pulling the Lion O/S out making it exclusively a Windows Pc?
This option, if possible would be very inconvenient as I suppose I would have to remove the Hard Drive containing the Lion O/S every time I wanted to use Win 7?
Can anyone advise me please

I just thought I would share my Mac Pro 1.1 experience. I recently had to replace a failed memory riser card by buying a pair from ebay (they both failed a month apart) and took advantage of the opportunity to replace my Mac Pro 2006 with the 2008 model for $700 and inserted my drives and upgraded to 10.8.5. Just holding off on Mavericks for now... Bought a Radeon 5770 and graphics are just peachy (i'm not a gamer). Then I put a samsung ssd 512gb in as the system drive and a 3tb for data so that machine is going fine
What to do with the 2006 Mac Pro?. No one wants it on ebay so I thought i'd try it on Windows. Windows 32bit loads via boot camp once you figure out how to recognise the sata bus (depends on your windows 7 dvd version i think) but under 32 bit you only get 2gb usable ram ! something , not just video is addressing 2gb so that *****. You cannot boot off the 64bit dvd (try it) so i installed 64bit windows 7 on a clean drive on my core2dou pc then put the drive in my 4core xeon mac pro. It booted fine and installed alot of drivers for the xeons automatically. Then I got some drivers from 64bit bootcamp and sound drivers from the realtek website. Then , I upgraded to 64 bit windows 8 pro and everything still works. Then, I downloaded the free windows 8.1 pro update and everything still works..... As PCs go, this is still a pretty fast machine, and gives little away to , say an i5 or i7. If you put in an SSD and gamers video card it would fly, but i dont need that....

Similar Messages

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?
H.264 video should be supported by your basic Snow Leopard operating system. The DVCPRO HD family of codecs is part of the Apple "Pro" codecs package which is normally installed as part of a "Pro" video editing suite installer or contemporaneously installed separately as part of one of the newer pro editing apps like FCPX. if you already have one of these pro suites or apps installed or available, then re-install the correct codec package that is missing. If not, you will need to purchase a Pro suite or app to be able to install the required codec package.

Bootcamp - Windows 8.1 - Mac Pro (Late 2013) -- ATI Driver Crash

Hi All,
I have a open case with Apple as well on this but i can not seem to locate any information on this issue on the web at all.
Case: 601052633
Basically, we received a new Late 2013 Mac Pro, and out of the box proceeded to install bootcamp and windows 8.1.
After the install and the bootcamp drivers are installed the screen starts to display lines and the ATi drivers eventually crash.
If we uninstall the ATI drivers the screen is returned to normal and windows uses the generic drivers, however the graphics performance is degraded.
If we install the latest ATI drivers (downloaded directly from the ATI webpage) the display issues reoccur.
If left to run its path the screen becomes unreadble and eventually the system bluescreens.
To recap all the things I have done:
Straight out of the box we started the boot camp install. We use the latest Windows 8.1 Media.
Once the process is completed the PC reboots as normal and we install windows on the “BOOTCAMP” partition.
Windows installs without issue and when the bootcamp drivers window pop’s up it starts its install. At the “Chipset” drivers install the window starts to flicker, this appears to be normal but afterwards the screen shows “lines” on it. (these lines can be seen on image below)
Once windows is booted the lines remain and progressively gets worse. Image below shows the ATI Criver crash and the blue screen. This takes 2-5 seconds. And depends on how much you move on the screen.
Screen capture (shown Below) shows the issues, even with screen capture the issue is recorded.
If we uninstall the ATI display drivers the issue disappears.
Process of tests:
Install Bootcamp windows 8.1 on Mac pro 2013 out of the box – Issue recorded
Remove Bootcamp and update firmware on Mac.
Install Bootcamp windows 8.1 on Mac Pro 2013 – Same issue.
Updated ATI Drivers using ATI drivers off ATI website – Same issue
Uninstalled ATI Drivers – 2 Generic Microsoft video cards detected – issue removed but video performance degraded.
Updated Bootcamp Drivers – ATI drivers reinstalled – Issue returned
Removed bootcamp, restored system to factory settings via web install.
Installed Bootcamp windows 8 on Mac Pro 2013 – Same issues
Removed bootcamp restored System to default
Tried installing windows 7 – not supported
Installed Windows 8.1 and ran screen captures and diagnostics.
We have also tried using different display ports, Different display adaptors, Different monitors.
Mac OS is not affected.
Note Mac is “out of the box”, Windows is a next next next install. No changes or software is installed.
Any support would be appreciated.
Cheers
Steffen.
It Manager.

I had this exact same issue and had been hunting it down since i first received my Mac Pro back in May 2014. I researched the problem all over the place but I have no idea why i did not find this post, or in fact why Apple techs did not find this post either.
Bottom line: In my case I have pretty much proved this was a problem with the AMD FirePro D300 video card/s. They basically can't cope with Windows graphics needs.
I have a new Mac with D500 cards, and now the problem is almost completely gone. I can recreate if i run certain situations and a screen saver. Upon refresh, there is a chance the card will crash, but showing a slightly different outcome.
Having read the prior posts, the D700 may also have the same issue??
Longer story and background: I am not exactly an expert, but i did try many different things and probably spent in excess of 200 hours onto tech support and installing, reinstalling, trying different monitors, trying different software. Eventually i was so frustrated and in tears with this issue.
The major problem over all this time was the constant response from Apple that this was not an Apple issue since the Mac OS was not showing any issues.
I was at the time a new Mac convert, my brother had purchased the 'awesome' machine for me as a birthday gift, with the goal that we could play a specific game together. My disappointment in Apples inability to recognize or even attempt to recognize that this was related to the hardware in the Mac itself was constant and ongoing.
My final visit to the Apple store to again visit the 'Genius' bar came up yet again with the most senior tech in the store telling me that there were no problems identified with the hardware and that this was not their issue. Totally frustrating. I was rather hoping, in the good tradition of true geeks, that this would have been a challenge to hunt down. I was pretty sure they trusted me that this was not a standard Windows issue, and thus was hoping they would switch out individual pieces of components (video cards being my first choice) to see if that the problem repeated. Nope, didn't want to do it.
My response was to threaten with legal action - not something i enjoyed doing, plus that i would NEVER buy an Apple product again. Since I was a new business client, this may have had an impact.
This wonderful Manager at the store agreed that he wanted to take the hardware out of the equation and see if I still had the issue. So he, amazingly, agreed to refund in full for the machine and I could order a new one.
As i was convinced this was hardware related, since I had the Quad core, D300's, 12 gig machine and my brother had the top of the range six processor, D500s, 16gig memory machine which did NOT have this issue, running identical software, when i reordered the Mac Pro, I bumped it up to the D500s (still Quad core) and 16gig of memory (also had the 1TB drive partitioned 40/60 in bootcamps favor).
I tentatively installed windows after a couple of days of normal Apple usage (software updates included).
I then hammered the system with the same software and installs.
Its been up and running for perhaps 2-3 weeks now, and I have not seen the issue at all, other then when i had screen saver running and 4 instances of the game running (Everquest for those of you who are interested - but the software is almost irrelevant, since i have had this issue using internet explorer or Chrome).
So.. I urge Apple to review this issue with the D300s and either remove them from the configuration options or resolve the issue. One of the powerful selling things for this wonderful machine is its ability to run Windows in native mode. I like it because I also want to get into App Development, so the dual option boot option is just what i wanted.
Responding to us poor Windows installers with 'not my problem' simply isn't good enough and should never have been something i had heard.
All good now, I am happy with the end result, but I would like Apple to recognize this IS AN ISSUE THEY NEED TO ADDRESS.
I apologize if my technical knowledge is not a strong as it might need to be in relaying this information to you guys, but hopefully it all makes sense.
Paul

I already bought mac book pro last year but it can't view windows just like mac pro for education. I want to make like it. How?

I already bought mac book pro last year but it can't view windows just like mac pro for education. I want to make like mac pro for education How?

First, if you have a MACBOOK PRO (a laptop), you should post in that forum. MAC PRO (desktop) and Macbook Pro are different things, so when you use those terms interchangeably, it's impossible to know what you're talking about.
Second, even guessing that you have a laptop, I still have no idea what your question means. Are you trying to load Microsoft Windows on it? Every Mac can run Windows using either Boot Camp or Parallels/Fusion/VMWare solutions. Please explain in more detail what you're trying to do, and we'll try to help. But post in the Macbook Pro forum if you're talking about a laptop.
Matt

I just installed lion on several machines. They all show air drop in the finder window except my mac pro.

I can't get air drop to appear on my finder window in my Mac Pro. What to do?

The Mac Pro is probably too old. Please read Apple's article about Airdrop at:
http://support.apple.com/kb/HT4783

Hello i would like instal windows in my mac pro retina but i don't have boot camp

Hello i would like instal windows in my mac pro retina but i don't have boot camp

What version of OS X are you running on your MBPr?
If you open Applications > Utilities, you should see Boot Camp Assistant in that folder.
That is the utility which will create the partition into which you can install Windows that you have purchased from Microsoft.

Windows, games on mac pro

I am looking for some input about running windows on a mac pro and playing games under windows , for example steam games? Will the games play as good as on a pc? Anyone with experience with this?

Windows graphic card performance:
http://www.barefeats.com/harper11.html
Radeon 4870 vs GTX 280 (neither works in OS X at all)
http://www.barefeats.com/harper19.html
Radeon 3870
http://www.barefeats.com/harper17.html

Bootcamp, intel mac pro, using entire drive, installer hangs- what am I doi

I have been trying to install boot camp and windows on my Mac Pro. Installing on my MacBook Pro was so easy I didn't expect any kind of problems, but I got them anyway.
a) I am installing on a hard drive and I expect to use the entire drive. I start boot camp and designate the drive. Windows appears to start installing but when I get the format screen, there is no partition on any drive labelled Boot Camp.
b) if I choose the drive I wanted anyway, it will format for NTFS and copy all the files. It will re-boot and start the GUI install but hang with 33 minutes to go. I have tried this multiple times and the result is identical every time.
What am I doing wrong?

As of this point in time, I have been able to get windows installed- I noticed during the windows setup and format section that the disk actually had two partitions, one very small and the other the size of the rest of the disk.
(this was probably a mistake) but I deleted the small partition, formatted the large one NTFS and continued with the install. Well, windows went on without a whimper after that and I was able to install the windows drivers from my apple disk.
BUT when i go to preferences/startup disk to select the BOOTCAMP partition (yes, that shows now) I don't see it.
If I start Fusion, I can see and boot the bootcamp partition but if I go into the control panel and start the bootcamp control, the mac os partition does not show.
So, does it sound as though I deleted what apple uses to select between the mac os and windows installations when i deleted that small partition?
I am afraid to try again.

How can I upgrade Windows 7 32 bit to 64 bit on Mac Pro bought in 2011?

I was able to install Windows 7 32 bit version on Mac Pro bought this year with OS 10.6.7 version with bootcamp. How can I upgrade it to Windows 7 64 bit?

Custom clean install is the only way - you can't 'upgrade' 32-bit OS to 64-bit, they are different kernel and drivers.
Windows 7 Upgrade and Migration
Windows 7- Clean Install Vs Upgrade

Questions about Installing Windows 7 ultimate 64 bit on Mac Pro

Hi, I have an early 2009 Quad Core Mac Pro which is running Snow Leopard. I have 4 internal drives in my Mac Pro. Does WIndows 7 have to be installed on the same drive I have Snow Leopard installed or can it be on any of my drives. My boot drive has 215 gb of free space. 2 of them have 100gb of free space and my 2 tb drive has 40 gb of free space. To install Windows 7, do I have to partition one of my drives which would mean erasing all my data? How much free space do I need for windows 7 and programs, etc? Would Windows 7 ultimate 64 bit work? Any info is greatly appreciated

Read the link ""The hatter"" gave you and read the "FAQ's", it will answer quite a few of your questions. Read the Installation manual a few times to familiarize yourself with it before you start and it will make it a lot easier when the time comes.
Windows will be little bit quicker on the Mac-Boot disk only because of your SSD drive. It's rare, but you leave yourself open for problems if anything gets buggered up with both OS's on the same drive. You could lose the Mac side also. You have the chance to save yourself one less problem with it being on a separate drive.
You can install Windows on "any" INternal drive with Boot Camp. Windows can only be installed in the #1 slot on a MacPro if there are any other drives in it. (You can put it in any slot after it's been installed.) And Windows can't be installed on an EXternal drive from a Mac.
Your best bet would be either put one of the internal drives into an external HD enclosure ($15/$20) and replacing it with another blank HD and just splitting it into two partitions or try to free up more space on one of the other drives so you have more room.
Or like ""The hatter""mentioned.
"""You could put OS X HD in lower optical drive bay and put in a drive just for Windows."""
The only problem with making room on an already full drive is that some times some invisible "root" files will be left behind and Boot Camp CAN'T move it and you could get a generic "Can't Install, Files in the way" type error. So you would have to Backup, erase, reinstall to clean it up that way.
It's not so much installing Windows without Boot Camp, but you need BootCamp in order to use the "Start-up Disk" preferences. The Finder can't see the Windows install with out it. No big deal if you want to use the "Option" Key every time to reboot. Boot Camp Also has a couple of preferences like the F-Keys, etc, that you may need to use. It Could be a bigger headache. Boot Camp just makes it A LOT easier for the -non- geeks.

Black Screen for Install of Windows 7 on Mac Pro Early 2008

I have a mac pro early 2008 with lion 10.7.4 and boot camp 4.0.3 I think... anyways the problem I have is when I am in boot camp, and configure the HDD partition, then the machine reboots... when it reboots and starts up boot from the install DVD (legit retail copy) I just get a black screen on both monitors. No curser, nothing just a black screen, same as I get when the machine is off! the little white LED lights are on and nothing...
I can hear the DVD spinning up and down a few times then that just stops too...
I have tried resetting the PRAM, pulling the power and watch battery inside for a few minutes, I tried the "fix" that is online for the imac problem with the answerfile and got no different resutls with anything, still the same probelm.
I have the OEM ATI Radeon video card 512MB.
* as a side note, I was never able to download the windows support drivers prior to trying the install... I tried and tried for the last two days so this time I "unchekced" that box and just went for the install...
Any help will be greatly appriciated, thank you :-)
Mike

Hey Hatter, I know this is a little old but I've just picked up this thread and I wonder if you can help. I get the same issue as:
JRASupport
Jun 28, 2012 1:56 PM
I have a mac pro early 2008 with lion 10.7.4 and boot camp 4.0.3 I think... anyways the problem I have is when I am in boot camp, and configure the HDD partition, then the machine reboots... when it reboots and starts up boot from the install DVD (legit retail copy) I just get a black screen on both monitors. No curser, nothing just a black screen, same as I get when the machine is off! the little white LED lights are on and nothing...
I get that dreaded black screen following partioning of my drive on the Windows 7 install on Mavericks on a Macbook Pro late-2008 (MBP5,1) but I'm at a loss to work out where the solution lies in the thread! ;-(
To date I've spent about 5 days going back and forth trying all sorts of combinations, including the obvious:
- removing bootcamp 5 and reverting to 4
- installing the imac drivers
A HUGE thanks if you can offer any help as I'm at the end of my tether...!
Adam
BTW I'm working off USB with 32 bit Windows 7 ISO

Install windows 7 on mac pro raid

I have just got a mac pro with raid (3 1tb drives), they are set to raid 0 and I am trying to install windows 7 64 bit, 32bit if I really have too but it will not find the drivers on the disk the mac made for the windows installation. Where do I find the drivers, and can I set up for raid 0 and have mac+windows installed?
Dave

Mac OS X software RAID is implemented in software that loads when the Mac OS X kernel is operational.
Mac OS X software RAID cannot be used for Windows. If you want your Windows Boot Volume on a RAID, put it on a separate drive (which is good advice in general) and use a Windows-only RAID solution.
Many users find that the OS (Mac or Windows) does not benefit much from RAID -- having multiple bootable backups is a better solution. For performance, having a separate Boot Volume reduces competition for the data Drives, and speeds up your computer considerably.

Installing windows 7 on mac pro retina, can not find cd/dvd driver

Hi there, I have bought mac pro retina. Trying to install windows 7, running boot camp. I have downloaded windows support pac on the same usb flush. When running instalation, the system is looking for cd/dvd driver. Even though I browse to the usb flush. It can not find the driver. Than I can not go futher. Anny ideas?Thank you so much

Could be you khave a corrupted Win 7 install file/files.
Try downloading the Win 7 ISO for the version you have from here.
http://www.mydigitallife.info/download-windows-7-iso-official-32-bit-and-64-bit- direct-download-links/
Then burn that ISO to a USB or DVD, USB would be better.

Playing Windows games on Mac Pro?

I'm giving my son my Mac Pro 3,1 2.8 gig dual quad core machine. He wants to play Windows games on it. How does one set that up? Also, he wants to upgrade the video card to the ATI 5770. Does he buy the one for Apple or Windows, and does he need special drivers? I'm getting a new Mac Pro 12 core. Thanks.

Forum and support:
Boot Camp
Apple Boot Camp Support
Boot Camp 4.0 Installation & Setup Guide OS X Lion
Boot Camp 4.0, OS X Lion Frequently asked questions
you will want Windows 7 Pro 64-bit (System Builder is fine, $139)
Radeon 6870 3DMark 30% gain on 5870
ATI Radeon HD 5870 Graphics Upgrade
Radeon 5870 vs 5770 GTX 285 4870
Boot Camp Mac Pro 2 x HD 5770
To see early startup you want an Apple compliant card. To play games you may be fine or want something more, depends on game and what level of performance.
You install Apple drivers and all the normal Windows gpu and other drivers.
And Microsoft Security Essentials.
Microsoft Security Essentials
Ah, didn't you already try or install Windows? seems like you did at least try? No?

Completely unable to boot camp windows 7 on Mac Pro

I am at the end of my rope. I have a Mac Pro 1,1 - 2.66 quad core, 7 gigs of ram. I have been trying over and over and over to Boot Camp Windows 7 onto a secondary hard drive. But every single time time, it hangs indefinitely or straight up freezes during "completing installation". I have scoured the interent for answers. I have tried typing shift+f10 when it hangs and typing in explorer.exe. This doesn't work. I have tried having all USB devices unplugged. I have moved the drive from bay 2 to bay 1 and having the other 2 drives empty. I have tried multiple discs. And from what I have found, the Mac Pro is completely unable to boot from a USB drive with the Windows 7 installer on it. WHAT DO I DO? Please help!

your mac pro like mine has older EFI firmware that does not support booting Windows 7 64-bit.
You will have to remove all other drives.
Before you do, reformat the drive you want ot use as Windows Master Boot Record and FAT32, then format the drive with Windows during install.
Get rid of whatever is on the drive now.
You will be limited to 1.9GB RAM
Windows 7 Home Premium supports just one cpu, you have two.
64-bit Windows requires UEFI which you don't have and would need to edit and modify the DVD (reburn after using Imgburn).
Easy method: do basic install on a PC and then put the drive in the Mac Pro.

Windows 7 64 bit on Mac Pro Ver 1.1 installation options!

Similar Messages

Maybe you are looking for