Windows 7 64-bit problems

Hi all. I'm aware that this is a fairly prominent problem and, reading around, I have seen that some people have been able to resolve this particular issue. I am having problems however, and cannot aptly describe the sheer frustration I am feeling. Recently upgrading to Windows 7 64-bit, I installed iTunes only to find that it had clearly installed a 32-bit version. Whenever starting the application I was confronted with a message that said I would be unable to burn cds unless I correctly reinstalled iTunes. This morning, then, I decided to download the most recent 64-bit version of iTunes. Upon finishing installation I was greeted by the notification "The folder iTunes is on a locked disk or you do not have write permissions to this folder." Delving into the same issue posted by the myriad people that have encountered this problem, I have seen that it is a permissions problem for Windows. However, I have been wholly unable to resolve it. Is there any way I can get help with this I would be incredibly thankful. Cheers.

itunes for windows is a 32-bit program, no matter which OS it is installed on. Only the drivers are different for 64-bit OS. What you're seeing is normal there.
+I have seen that it is a permissions problem for Windows.+
In Win Explorer, right-click on the itunes folder, Get Properties > Security tab.
Make sure your username has full control and ownership, and apply to all child/subfolders.
If still no joy, temporarily turn off UAC and see if itunes will launch.

Similar Messages

Need Help: TS130 Server and Windows Server 2008 R2 64 Bit Problems

I have 2 TS 130 Lenovo Servers with Xeon 3.2 Ghz CPUs and 16GB of memory. Installing ANY version of Windows 64 Bit after a couple of reboots will cause the system to blue screen. Once it blue screens it is impossible to get back into Windows.
Get this. Installing ANY version of Windows 32 bit works just fine on either machine. I have swapped out ram, hard drives, raid on raid off, updated BIOS etc and the same exact issue on both machines. I have swapped out media thinking maybe it was just a bad disk, but after 3 copies of Server 2008 R2 64 and 2 copies of Windows 7 Ultimate 64 and 3 copies of Windows 7 Professional 64 bit and THEN the same problem occurring over and over on BOTH servers.. well needless to say I am pulling mu hair out. These are ALL OEM copies by the way not burned copies.
I called Lenovo Thinkserver support as we are a partner, and their only suggestion was changing some legacy settings in the BIOS which of course has done nothing. I have changed every setting in the BIOS that I feel it could possibly be and still no joy.
Thinking it MAY have been a video problem, I have even went so far as to add new video cards to both machines and the problem still exists on both machines. All drivers are latest versions, and I am getting tired of getting everything setup, and then BAM BSOD.. I have been a tech for 25 years, and I have NEVER seen this issue on any machine ever..
As far as the BSODs, one time it will be the language pack error, next time something else, and the next time something else.. no way to nail down the problem.
I KNOW its a machine error, especially when 32 bit runs fine on either machine, but what it is I have no clue.
I am hopeful someone here has had the same issue and can tell me what they may have done to solve the problem. It is absolutely driving me up the wall....
Thanks in advance for ANY help or suggestions.
Mike at Mitek Computers

Never mind.. FINALLY found the problem. Even though I swapped out media etc as far as Server 2008 went, I always used the same COA key.. guess what... English media and Japanese key.... snafu on our OEM vendors end I suppose.
Anyway I was issued a new product/virtual key through Microsoft and it resolved the issue.... stupidest thing I ever saw...
Mike at Mitek

Deskjet 720 Series, need patch for 32 bit Windows 7, same problem as 64 bit

I have been frustrated trying to get my Deskjet 720C printer to work with Windows 7. I saw that the 64 bit problem was solved but it says not for the 32 bit. Why can't it be used on the 32 bit? And what should I do? Thanking you in advance. Mo

The 64 bit version of the drivers for the Deskjet 710/720/810/820/1000 series printers do not work properly as delivered and a patch is required, available here. This patch works for Vista and Windows 7, there is no patch available for Windows 8 at this time.
The 32 bit version of Vista, Windows 7 and Windows 8/8.1 do not require a patch, the delivered driver works. The usual issue with the 32 bit version is the port connection. The Deskjet 720c only had a parallel port and most WIndows 7 machines only have USB ports. There are USB-Parallel converter cables available, but these can be problematic. If you are using a USB-parallel converter cable you will need to make sure you have one that is compatible with Windows 7. The models mentioned in the posts here have been tested to work by folks in the forum.
If you have not resolved the issue please provide some additional details of the problem you are seeing, including how the printer is connected (parallel cable or USB-parallel cable), how the driver wwas installed and any error messsages you see.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Product: HP Pavillion dv5 Operating System: Windows 7 64-bit Problem: Smart Hard Disk Error

Product: HP Pavillion dv5
Operating System: Windows 7 64-bit
Problem: Smart Hard Disk Error
Disk Name: WDC WD3200BEKT-60V5T1
How do I fix this error?

Hi,
If you're starting to get Smart warnings, it's probably best to think about replacing the Hard Drive - at the very least, make sure you have a current back-up of all your personal files etc in case the drive fails suddenly.
If you'd like a guide on replacing the Hard Drive, please post back with the full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Unable to unzip oralce 11g files in windows(32 bit) xp sp2

Database Installation
i tried to unzip oracle 11g version 2 using 7zip and winzip 15.5..i tried with winrar too...
WHEN I RIGHT CLICK AND TRY EXTRACT HERE OPTION with all the softwares i am getting errors as "UNEXPECTED END OF ARCHIVE","UNABLE TO OPEN THE FILE"..
IF I OPEN THE FILE IN ARCHIVE AND CLICK EXTRACT i get error as "THE ARCHIVE IS IN UNKNOWN FORMAT OR DAMAGED.."
i downloaded 11g version 1 and 2 from oracle site itself..but i faced the same problem with both..
i couldnt extract both the files where as i am able to extract any other files on my computer...
why am i facing problem with only these files????

865053 wrote:
Database Installation
i tried to unzip oracle 11g version 2 using 7zip and winzip 15.5..i tried with winrar too...
WHEN I RIGHT CLICK AND TRY EXTRACT HERE OPTION with all the softwares i am getting errors as "UNEXPECTED END OF ARCHIVE","UNABLE TO OPEN THE FILE"..
IF I OPEN THE FILE IN ARCHIVE AND CLICK EXTRACT i get error as "THE ARCHIVE IS IN UNKNOWN FORMAT OR DAMAGED.."
i downloaded 11g version 1 and 2 from oracle site itself..but i faced the same problem with both..
i couldnt extract both the files where as i am able to extract any other files on my computer...
why am i facing problem with only these files????Oracle Database 11g Release 2 (11.2.0.1.0) for Microsoft Windows (32-bit)
win32_11gR2_database_1of2.zip (1,625,721,289 bytes)
win32_11gR2_database_2of2.zip (631,934,821 bytes)
Directions
1. All files are in the .zip format. There is an unzip utility here if you need one.
2. Download and unzip both files to the same directory.
3. Installation guides and general Oracle Database 11g documentation are here.
4. Review the certification matrix for this product here.
refer the linK:-http://www.oracle.com/technetwork/database/enterprise-edition/downloads/112010-win32soft-098987.html
as mentioned earlier, check size of the download zip file with above mentioned bytes. else try to download again.
while downloading, do not pause the download in the middle and continue it will corrupt the oracle software.
if you use any download manager dont pause/stop.
Good Luck.

Installed iTunes 10.2.1 for Windows (64-bit), Error 7 Windows 998

Hello
After updating iTunes 10.2.1 for Windows (64-bit)I am getting the dreaded iTunes was not installed correctly, Please reinstall iTunes. With error 7 (Windows error 998) popups.
Tried already all the known uninstall/install/repair suggestions. Tried runnng as administrator or changing permissions. Tried disabling Bonjour Service.
Until now nothing has repaired it.
Is there a way to fix this? Can it be an Adobe update?
Is there a way to get an older version?

I had the same problem. I tried doing a system restore to a day or 2 before i did the update. The restore was successful but the itunes problem remained. After that I went into the control panel, selected itunes and clicked the repair tab.
It now works fine for me. The only other step I took was to copy my itunes folder into another location in case anything went wrong. Once the repair was complete I simply replaced the new empty itunes folder with my previous one.
Hope this is of some help.

Entry point not found - iTunes 10.7 for Windows (64-bit) reinstall

After ignoring iTunes update prompts for about 2 years, I recently tried updating to the latest version (12.1) without success. After searching for solutions to this problem online, I decided to uninstall iTunes and try reverting back to iTunes 10.7 for Windows 64-bit (on my Windows Vista laptop).
At this point I have installed, repaired, uninstalled, reinstalled, and repaired the 10.7 version and am still unable to access iTunes. When I try to launch iTunes, I get the following error messages:
"iTunes.exe - Entry Point Not Found
The procedure entry point CMTimeRangeMakeFromDictionary could not be located in the dynamic link library CoreMedia.dll."
When I click OK, I then get:
"iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)"
(As I stated above, reinstalling hasn't worked!)
In my online troubleshooting searches, I've found posts regarding entry point issues but none with "CMTimeRangeMakeFromDictionary" or "CoreMedia.dll" in them. I'm unsure what to do next (should I attempt iTunes 12.1 again?), and my biggest concern is that I will somehow lose all my music. Any help would be greatly appreciated! Thank you

Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. CoreMedia.dll is part of Apple Application Support.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

ITunes 11.2 for Windows (64-bit) hangs when opened

Hi
I recently updated to iTunes 11.2 for Windows (64-bit) on both my PC & laptop which both run Windows 7 and are apart from this problem with Itunes are very stable.
After installing the updates, each time I try to launch Itunes the program will open to show the main window but then I get the following:
I cannot make any of the functions respond (via mouse or tabbing)
The "timer circle" (Same as Apples "egg timer I guess) just runs & runs.
Eventually after say 20 mins, I get the standard Windows message about Itunes has stopped.
I then have to exit via this message window, whcih closes the Itunes program down.
I cannot find any conflicts with spyware etc and all other programs etc are running as normal, any ideas if this is a bug in iTunes 11.2 for Windows (64-bit)? Or is there something else I can try?
I have tried completely uninstalling & reinstalling the software, but that failed too (and I do not know whow to find a previous release of Itunes to try again!)
Thanks in advance for your assistance.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Mobile client for windows 64 bit

Is there a mobile client that works on windows 64 bit?
just been asked to test out our app on a windows 7 laptop and it fails straight away with UnsatisfiedLinkError: c:\mobileclient\bin\oljdbc40.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform
Cannot see anything in the oracle downloads, but they are in Berkeley mode now rather than the traditional stuff.

Not a proper solution, but i have found a work around for the problem
The windows 7 64 bit machine had java 1.6.0_16 installed as the default (we have a problem with a change to the toDate function tightening things up in 1.6.0_18 causing exceptions in our 3rd party software).
We also had an application that was bundled with its own JRE 1.6.0_06 on the machine and when i switch the application code to point at that JRE everything works fine. Not a java person, but i assume that somewhere between 1.6.0_06 and 1.6.0_16 SUN added true 64 bit support and this requires all libraries to be in line. The older version not knowing anything about 64 bit could cope, but obviously without making best use of the device resources
as we have a work around for the time being, i will probably leave this issue until we start on investigating the migration to berkeley in the new year
Edited by: GaryW on Nov 4, 2010 9:54 AM

Can't install itunes on windows 64 bit system

I tried to install itunes on my 64 bit machine, but with verson 6.0.5, it says this software doesnt support 64 bit systems. I tried to install an earlier version i think its 6.0.4.2 not sure, but it does install on my computer. When I try to open the program and quicktime, I get error box saying the program had a problem and couldn't open. Is there anyway to fix this problem, and is there a way to have the newest version of itunes to work on windows 64 bit?
Windows XP Pro

iTunes and QuickTime have never been supported on the 64-bit version of Windows (look here for the official statement). Some people have managed to get it working (at least tolerably), but from what I've read, a recent update from Microsoft has caused a lot of problems. You might try rolling back recent Windows updates and see if you can get things working again.

Itunes 1.11 windows 8 install problems, itunes 11.1 windows 8 install problems

I am running Windows 8 on a Dell XPS16 laptop and was using iTunes v 10 something. When upgrading my iPhone 4S to IOS7 while connected to iTunes running on my PC, the upgrade indicated that I needed to upgrade my iTunes to v11.1 something (the latest version). I proceeded to do this and the upgrade appeared to work OK. However, when attempting to restart iTunes (after a reboot) all that happened was that the iTunes Software License Agreement window opened on my PC. There are no buttons on the window, even after scrolling all the way to the bottom, and no option but to close the window. So my current state is that I now no longer have a working iTunes on my PC.
I have tried many of the suggestions made to others who were also having problems with this upgrade. Each time I downloaded, saved, ran or re-ran an upgrade, the install appeared to work fine and finished normally. Each time the installation populates the \Program Files (X86)\iTunes folders and the properties of the iTunes.exe are as follows:
I thought this was to be a Windows 64 bit upgrade so I'm not sure why it gets put in "...\Program Files (X86)" as opposed to "...\Program Files".
I have tried all of the following and each time I just get the same license agreement window shown previously:
1. Followed an iTunes support link that indicated how to remove and cleanup all Apple software and then re-install iTunes by downloading it and using Run As Administrator to run the downloaded file iTunes64Setup.exe.
2. Tried to troubleshoot the .exe using the properties | compatibility | Run Compatibility Troubleshooter option - no luck.
3. Numerous cycles of download and save the update, uninstall the old, install the new, install/repair the existing, etc.
Note that about a month ago, I allowed iTunes to upgrade itself to version 11.1... and the same thing happened as described above. I spent many hours trying to resolve the issue and finally had to go back to ITunes 10 something. I have, since that time, ignored any iTunes requests to upgrade but in a weak moment when upgrading my phone, I lost my head and let the upgrade proceed! Hopefully someone has a solution to getting the Windows 8 64 bit upgrade working.
Any help would be appreciated.
Thanks, Henry.

Try these
Motherboard and chipset (4)
Select
Number
  Driver Name
Version
Size
Update
File Download
36042
  Intel chipset motherboard drivers (Intel Chipsets Device Software)
9.3.0.1021
2.61 M
12-09-26
  Download
36043
  Intel IRST Intel Rapid Storage Technology (Intel Rapid Storage Technology)
11.5.0.12 ...
10.62 M
12-09-26
  Download
36044
  Intel MEI Intel Management Engine Interface (Intel Management Engine Interface)
8.1.0.1263
47.09 M
12-09-26
  Download
36045
  Intel IRST Intel Quick Start technology (Intel Rapid Start Technology)
2.1.0.1002
1.60 M
12-09-26
  Download
Graphics (2)
Select
Number
  Driver Name
Version
Size
Update
File Download
36047
  Intel video driver
9.17.10.2 ...118.58 M12-09-26  Download 36049
  NVIDIA graphics driver
9.18.13.5 ...207.87 M12-09-26  Download
Sound card (1)
Select
Number
  Driver Name
Version
Size
Update
File Download
36050
  Conexant Audio sound card driver
8.54.44.0100.49 M12-09-26  Download
NIC (1)
Select
Number
  Driver Name
Version
Size
Update
File Download
36051
  NIC driver
8.2.612.2 ...3.76 M12-09-26  Download
Touchpad (1)
Select
Number
  Driver Name
Version
Size
Update
File Download
36052
  Touchpad driver
16.2.10.15109.17 M12-09-26  Download
Wireless LAN (1)
Select
Number
  Driver Name
Version
Size
Update
File Download
36053
  Wireless LAN (network controller) device driver
15.5.0.42 ...178.83 M12-09-26  Download
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Error installing MaxDB 7.6.03.09 on windows 32 bit on NW70 SR2 sapinst

MaxDB experts,
Hello. I am trying to install SAP NW70SR2 (JAVA AS) on MaxDB 7.6.03.09 with windows 32 bit OS. Brand new install, JAVA AS central system.
Our problem is in the SAPINST phase:
Install database server software
I see this in the sapinst.log file:
starting installation phase of package Base 7.6.03.09 32 bit
ERR: InstallRegistry::newPackage(): can't add Package "Base" -> "c:/sapdb/programs": already exists!
installation exited abnormally at Th, Apr 09, 2009 at 16:19:41
ERROR      2009-04-09 16:19:41 [iaxxinscbk.cpp:282]
           abortInstallation
MDB-07020 The database installer reported an error. Some database applications are probably still running. Check the log file sdbinst.log.
And this is in the bottom of the sdbinst.log file
starting installation phase of package Base 7.6.03.09 32 bit
ERR: InstallRegistry::newPackage(): can't add Package "Base" -> "c:/sapdb/programs": already exists!
installation exited abnormally at Th, Apr 09, 2009 at 16:19:41
The sdbinst.log has lots of other interesting info:
This is the top of the file:
Installation of MaxDB
+     ***********************+
starting installation Th, Apr 09, 2009 at 16:18:56
operating system: Windows I386 NT 5.1 Service Pack 3
callers working directory: C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ADA/CENTRAL/AS
installer directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
archive directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
starting preparing phase of package Base 7.6.03.09 32 bit
getInstalledReleasesWin(): wrong version format
checking interferences to other packages... ok
I'm not sure why there is a version info problem.
This is a windows PC I'm trying to put this on. It's 32 bit so that is why I had to get the SR2 DVDs. The SR3 DVD won't let you install via 32 bit OS.
I downloaded all the software from OSS marketplace and some from our delivered DVDs:
We have these DVDs
32 BIT BS_2005_SR2_SAP_Installation_Master 51033208
32 BIT NW_7.0_SR2_Kernel_WINDOWS__LNX_X86 51033262
NW 7.0 SR2 SAP Installation Export 51032246
NW 7.0 SR2 SP09 Java based SW Comp 51032257
I pulled this down off the marketplace (in the NW70SR3 area)
32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10
I've searched all through OSS/SDN for someone who has this same issue. All our other systems are AIX/oracle so trouble-shooting MaxDB is completely new to me.
Can anyone point me into the right direction to get this figured out? I'm tried just re-running the install, same error. And removing the c:/sapdb/programs, no good.
Thanks!
Nick

Natalia,
Here is the entire Install log for MaxDB. Also remember that this was called as part of an SAP system install:
MaxDBServer_install-10.04.2009-10.05.log
INSTALLER_INFO: Version = 7.6.03 Build 009-123-163-622
INSTALLER_INFO: Changelist = 163622
INSTALLER_INFO: MakeId = 267230
INSTALLER_INFO: Type = kit
SYS_INFO: Host name = DGW58J1L
SYS_INFO: System = Windows
SYS_INFO: Architecture = I386
SYS_INFO: Version = NT 5.1
SYS_INFO: Subversion = Service Pack 3
CALL: SDBINST -indep_prog C:\sapdb\programs -indep_data C:\sapdb\data -depend C:\sapdb\CEL\db -profile Server -b
STDOUT:
     Installation of MaxDB
STDOUT:      ***********************
STDOUT: starting installation Fr, Apr 10, 2009 at 10:04:43
STDOUT: operating system: Windows I386 NT 5.1 Service Pack 3
STDOUT: callers working directory: C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ADA/CENTRAL/AS
STDOUT: installer directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
STDOUT: archive directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
STDOUT:
MSG: debug package SDBBAS.SDB is valid
MSG: debug package SDBKRN.SDB is valid
MSG: debug package SDBUTL.SDB is valid
STDOUT:
starting preparing phase of package Base 7.6.03.09 32 bit
STDOUT: -
MSG: service "sql6" in "C:/WINDOWS/system32/drivers/etc/services" found
MSG: service "sapdbni72" in "C:/WINDOWS/system32/drivers/etc/services" found
MSG: InstallRegistry: space check ok: 127249572 kb on C: (156288320 kb total) available
MSG: install registry successfully locked
MSG: read 12 PACKAGES
MSG: net registry size = 121301 bytes
MSG: InstallRegistry: reserved 1024 kb disk space
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: independent data path: c:/sapdb/data
STDOUT: independent program path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SDBBAS.TGZ"
STDOUT:
package Base successfully checked
STDOUT:
starting preparing phase of package SQLDBC 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package SQLDBC 76 7.6.03.09 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: dbc path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SQLDBC76.TGZ"
STDOUT:
package SQLDBC 76 successfully checked
STDOUT:
starting preparing phase of package Fastload API 7.6.03.09 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: fastload path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/FASTLOAD.TGZ"
STDOUT:
package Fastload API successfully checked
STDOUT:
starting preparing phase of package PCR 7104 7.1.04.45
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: independent program path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7104.TGZ"
STDOUT:
package PCR 7104 successfully checked
STDOUT:
starting preparing phase of package PCR 7300 7.3.00.59
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: precompiler 7300 path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7300.TGZ"
STDOUT:
package PCR 7300 successfully checked
STDOUT:
starting preparing phase of package PCR 7301 7.3.01.22
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: precompiler 7301 path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7301.TGZ"
STDOUT:
package PCR 7301 successfully checked
STDOUT:
starting preparing phase of package PCR 7403 7.4.03.49 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: precompiler 7403 path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7403.TGZ"
STDOUT:
package PCR 7403 successfully checked
STDOUT:
starting preparing phase of package PCR 7500 7.5.00.46 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: precompiler 7500 path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7500.TGZ"
STDOUT:
package PCR 7500 successfully checked
STDOUT:
starting preparing phase of package SAP Utilities 7.6.03.09 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: : c:/sapdb/data
STDOUT: independent program path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SAPUTL.TGZ"
STDOUT:
package SAP Utilities successfully checked
STDOUT:
starting preparing phase of package DB Analyzer 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package JDBC 7.6.03.03
STDOUT: -
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package Server Utilities 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package Database Kernel 7.6.03.09 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: dependent path: c:/sapdb/cel/db
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SDBKRN.TGZ"
STDOUT:
package Database Kernel successfully checked
STDOUT:
starting preparing phase of package Redist Python 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package Loader 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package Messages MSG 0.5603
STDOUT: -
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package ODBC 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT: checking filesystem "C:"... free disk space ok
MSG: available = 127248680 kb
MSG: needed = 339145 kb
STDOUT:
starting installation phase of package Base 7.6.03.09 32 bit
STDOUT: -
STDERR: ERR: InstallRegistry::newPackage(): can't add Package "Base" -> "c:/sapdb/programs": already exists!
STDERR: installation exited abnormally at Fr, Apr 10, 2009 at 10:05:29MSG: packagedata of package SQLDBC not changed
MSG: packagedata of package DB Analyzer not changed
MSG: packagedata of package JDBC not changed
MSG: packagedata of package Server Utilities not changed
MSG: packagedata of package Redist Python not changed
MSG: packagedata of package Loader not changed
MSG: packagedata of package Messages not changed
MSG: packagedata of package ODBC not changed
MSG: writing 12 packages
MSG: net install registry size = 121301 bytes
MSG: wrote install registry (141250 bytes)
MSG: install registry successfully unlocked

Error with Installation of SAP R/3 4.6C on Windows 64 Bit

Hi,
we have the following problem by installing the SAP R/3 4.6C on Windows 64 Bit:
DBDBSLTESTCONNECT_NT_IND , SysDbslConnect: 100
Cannot connect to DB, rc = 8192
Can some one help me?
What is the user connecting during the installation?
Thank you!

File DATABASE.R3S contains the following phases in 4.6C SR2. This file is usually same in most releases. This file must be edited befure running with R3SETUP. Here all the phases.
Phases marked with BOLD are not necessary and MUST NOT BE RUNNED.
You have to put "STATUS=OK" line at the end of all these phases by using R3EDIT, SAPPAD or NOTEPAD.
10=DATABASEINSTANCE_NT_MSS
20=DBCOMMONDBENV_NT_MSS
30=CALCRAM_NT_MSS
40=CDSERVERBASE_NT_MSS
50=OSGROUPSAPLOCAL_NT_IND
60=OSGROUPSAPLOCALADMIN_NT_IND
70=OSGROUPSAPGLOBAL_NT_IND
80=OSUSERSIDADM_NT_IND
90=OSUSERSIDADMPASSWD_NT_IND
100=OSUSERSIDADMRIGHTS_NT_IND
110=DBOSUSERMSSXP_NT_MSS
120=DBOSUSERMSSXPPASSWD_NT_MSS
130=GETDBSIZEKEYS_IND_IND
140=DBBUILDTEMPDB_NT_MSS
150=DBBUILD_NT_MSS
160=DBPOSTBUILD_NT_MSS
170=DBPRELOAD_NT_MSS
180=DBMULTISCHEMA_NT_MSS
190=DBDBSLTESTCONNECT_NT_IND
200=DBR3LOADEXECDUMMY_IND_IND
210=DBR3LOADEXEC_NT_MSS
220=DBR3LOADVIEWDUMMY_IND_IND
230=DBR3LOADVIEW_NT_IND
240=DBPOSTLOAD_NT_MSS
250=DBCONFIGURATION_NT_MSS
260=DBPROCEDURES_NT_MSS
270=DBR3LICENSECREATE_NT_MSS
280=DIPGNTAB_NT_IND
290=EXITMNLSSTARTR3_NT_IND
300=RFCRSWBOINI_IND_IND
310=RFCRADDBDIF_IND_IND320=QUERIESFINISHED_NT_IND

Whenever I boot my pc, which operates on windows 64 bit, I receive the erroer message: 'The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll

Whenever I boot my pc, which operates on windows 64 bit, I receive the erroer message: 'The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll'
This appears to be a common problem, can anyone provide me with a 'user friendly' solution please?

Remove MobileMe if still present on your computer.
Otherwise see Troubleshooting issues with iTunes for Windows updates.
tt2

ISight - connects with windows users no problem?

I'd like to buy this webcam, but I heard it has problems connecting with windows users. Will I be able to talk to people on it through AIM? Thats what I'd like, if not, I probably wont get it. Anyone have any personal experience or have any answers or helpful tips - I'd appreciate anything - thanks.

It is not the iSight itself that gives you the impression that connecting with Micros~1 Windows users causes problems ... it is the availability of (cross platform) applications that makes connecting a bit more cumbersome.
I have PowerMac G5 with iSight and I connect with my Micros~1 Windows platform family equiped with and without USB webcam.
The challenge will be to find messaging / VoiP applications with bearable audio quality and reasonable video performance.
I started with Skype for Voice and Yahoo! messenger for bad video ( 1-2 fps and video size 320 x 240).
Skype has a video plugin (only for Windows)
Yahoo! Messenger does not have voice yet (2.5.3)
MSN is badmouthing because of the "M"
I have used iChat with another Apple believer ... and the quality of Voice and Video is unparralled.
The best two alternatives I found are:
a) AIM 5.9
b) Trillian (www.trillian.cc)
Both use a free AIM screen name.
AIM works fine, see also EZJim pages.
TrillianPro 3.1 reuses AIM screen names ... and ... it has both good audio and zoom-to-full-screen-video size with fps rates filling your bandwidth.
The only negative on Trillian so far, the "handshake" for connecting two people takes some time.
TrillianBase is free but has no Video capabilities. The Pro version is 25$.
Regards Coen
ps. if you want to test your setup use my AIM screenname: coenjeukens

J2SE 1.4.2 for Windows x64 bit download link

Dear All,
Can any one give me the link to download J2SE 1.4.2 for Windows x64 bit architecture?
Your help is highly appreciated.
Regards,
Syed

There should be no issues with using SAP JVM from the start.
Probably no notes because is straightforward:
- Extract the SAP JVM (e.g. c:\sapjvm_4)
- Set JAVA_HOME (c:\sapjvm_4)
And start installation as per guide.
We have done this recently with Solman 7 EHP1 and NW 7 EHP1 (J2EE stack).
We did have issue on central instance install where the J2EE instance would not start part way through installation (server0 continually crashed and restarted with memory issues) so we had to adjust the instance settings as per SAP Note#1603093, before retrying in SAPINST and continuing.
We had this problem with both Solman & NW 7 EHP1.

Windows 7 64-bit problems

Similar Messages

Maybe you are looking for