Windows 7 64 bit sharing problems with remote

FYI Problem fixed
Go to Control Panel\All Control Panel Items\Network and Sharing Center\Advanced sharing settings
Go to File sharing connections (In your current Profile)
Click on "Enable file sharing for devices that must use 40 or 56 bit encryption"
Save Changes
Try your remote ... My Iphone 4 "Remote" program would not work on a 64 bit Win 7 machine until I tried this ... Now it works great!

Did you disconnect wireless on the 2 Windows 7 64 bit machines while testing wired?
What is the connection between the Actiontec and the Belkin? LAN-to-WAN or LAN-to-LAN?
If the connection is LAN-to_LAN, the wireless connection on each machine would have obtained a DHCP address from the Actiontec. When you connected wired, you would have gotten a new IP address based on the different MAC address of the wired NIC, resulting in the machine having 2 IP addresses. This may not be readily apparent on the Actiontec main status page as the second connection will get a generated name of "new-host-xx" (the router can't reuse the same PC name for 2 different IP addresses). Windows should be able to keep the two connections on the same subnet straight, but I've seen WIndows do stranger things.
If the connection is LAN-to-WAN, the Belkin must have a different subnet address than the Actiontec (e.g.. 192.168.2.x). Now, if you connect both wired to the Actiontec (192.168.1.x) and wireless via the Belkin (192.168.2.x), Windows is going to have connections to two different subnets with two different gateway routers. Without explicit routing rules, Windows won't know which gateway to use.

Similar Messages

Easy print not working on a 64 bit Windows 8.1 client with Remote Desktop connection version 8.1

Easy print is not working on a 64 bit Windows 8.1 client with Remote Desktop connection version 8.1 . Printers dont get redirected when you connect to the terminal server. The server we are connecting to has Windows 2008 server. On 32 bit Windows
7 and windows XP clients Easy print is working fine and printers get redirected in terminal server.

I am having the exact same problem. Windows 7 works fine, but 8.1 will not redirect printers. Others said to check local policy terminal services settings and my setting are all set as they should.
I think Windows 8.1 is not telling the terminal server what printers it has.

Problems with Remote App on iOS 4?

I have a new iPhone 4 and tried to use the Remote App in Connection with Apple TV. While I'am able to pair the remote app with Apple TV, I cannot use it properly. It works for a while, then it get's disconnected with a message that maybe a Firewall might be activated in the Router.
I have no problems with Remote App connected to my iTunes Library. I also tried it with a iPod Touch which is still on iOS 3.1.3, no problems to connect to the Apple TV from there as well.
Are there any known problems with iOS 4 and Apple TV?

Chenks wrote:
maybe for you, but isn't for me.
i have the remote app on my iphone4 and it's connected to 2 appletv's.
i don't experience any dropping of connection etc.
May I ask what wifi hardware you use? It might be an wifi issue, but one which is only related with the "Bonjour" protocol which seems to be used for the Remote App. I found this thread which is older (iOS 3) but describing exactly the same problems:
http://discussions.apple.com/thread.jspa?threadID=2048555&start=0&tstart=0
bear in mind that the iphone4 is now "n" wifi compatible (2.4Ghz), so could it be that the "n" part of your network is poor and thus why you only see the problem on the iphone4 ?
At least it is not poor when using it from other devices or moving a lot of data in other Apps. It is all Apple Hardware (nothing older than 2 years), and maybe that's the problem. I never had network hardware which made so much trouble, as Apples Airport series. I wouldn't wonder if it is an incompatibility between a new wifi chip in the iPhone 4 and a older Revision of an Airport device. But I don't know how to check - is there a system.log on the iPhone which I can access somehow?

File sharing problems with my Media Player, an A C Ryan

I have a media player, an A C Ryan, hooked up to my wifi at home and it normally accesses all my hard disks that is plugged and shared on my iMac. I had no problems when the iMac was on Snow Leopard. Under Network/Workgroup in the AC Ryan's menu, I can see and access all the files on the hard disks.
The moment I upgraded to Lion, all such access was lost. The AC Ryan cannot connect to the hard disks any more via the wifi network. it's as though file sharing has stopped completely. I checked the file sharing settings on the iMac and nothing has changed i.e. the disks were shared as usual. After struggling with many possible solutions and failing (I checked out a lot of forums), I reintalled Snow Leopard and the problems were immediately solved.
Is there something seriously wrong with Lion's file-sharing? Has this been fixed in 10.7.2? My friend who has a similar setup (his media player is the WD Live) has exactly the same file sharing problem with Lion.
I would appreciate any feedback. Thanks!

I believe that NTFS-3G has issues with Lion.
I use Paragon NTFS and have had no issues at all. I am pretty sure that NTFS-3G will get updated, but you need to check their site to find out when.

Windows 7 detects problem with iPod shuffle and after troubleshooting say it can't fix and disconnects it. What's up?

Windows 7 detects problem with iPod shuffle and after troubleshooting say it can't fix and disconnects it. What's up?

You might get some help over on the shuffle discussions.
http://discussions.apple.com/forum.jspa?forumID=822

Problem with remote control and Windows 7 - HP Pavilion 6301eu

I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you

Hi John:
Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
Thanks for your help though and if you have any other ideas, I'm all ears.
Mark

IOS Remote and Home Sharing problems with iTunes 10.6.3

I'm having a problem with Home Sharing and the iOS Remote app accessing iTunes since the 10.6.3 update. I have the following:
2011 Mac Mini Server running Lion 10.7.4 and iTunes 10.6.3
IPhone 4 running iOS 5.1
iPad 2 running iOS 5.1.1
Latest model Apple TV
The Remote app on both the iPhone and iPad are unable to connect to the iTunes library on the Mini (the app will just sit there trying to connect but never make a connection). The Apple TV is showing the same behaviour: when I go into 'Computers' it tries to connect to my library without success.
I've tried a few things:
1) Turning off and re-enabling Home Sharing on the Mac Mini
2) Deleting my library in the iOS app and then re-adding it
In both cases this seemed to work at first, but then after a while I was unable to connect again.
I have since discovered that if I quit and restart iTunes on the Mac this seems to resolve the issue on all of the other devices. But again this is a short term fix and after a while they are once again unable to connect.
The Mac Mini is always on and is set to not sleep (although I have to enter the password again after an hour).
At first I thought this might be time related, and that if the Mac had been idle for a while and the drives were 'sleeping' then the issue would occur. However, if I have left the Mac for several hours and then go back to it and login and start something playing in iTunes the other 3 devices still cannot connect even though iTunes is active and reading from the drive. As soon as I restart iTunes they can all see the library again for a while.
Does anyone have any suggestions?
thanks
Mark

Same thing here except I'm not running server software on the Mac Mini. The Apple support person said that iTunes is the same, server or not. He recommeded setting sleep to never, but I get the same connection problems. I also automatically restart the Mini and relaunch iTunes on startup every morning at 6 AM. And, as with your experience, the only temporary solution is to quit and restart iTunes at the time that I want to connect. Apple TV, iPhone, and iPad all have the same connection problem. My only hope at this point is 10.8. I have to say, 10.7 has never behaved better than a beta release. I hope they took a little more time with Mountain Lion.
Sorry I don't have a solution. I wanted to add my name to the list and hope someone out there has some insight to share.

Windows 8.1 Pro 64 bits. Problem with IDT High Definition Audio Driver on my HP pavilion g6 notebook

Hi!
I'd recently upgraded from Windows 7 to Windows 8.1 Pro 64-bit version. All drivers worked fine but I'm having problems with IDT High Definition Audio driver. Can someone help me? Thanks in advance! My PC model is: LS278EA#ABE

Hi:
See if this driver works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1&cc=us&dlc=en&lc=en...

ICloud WINDOWS 7 64 Bit sync problem with calendar of Outlook 2010

I am using
iPhone 4S (IOS5)
iPad 1 (IOS5)
PC (WINDOS 7 SR1 32 bit, Cor-2-duo) & Outlook 2010, 32 bit, at home
PC (WINDOWS 7 SR1 64 bit, Intel i7) & Outlook 2010 version 14.0.6106.5005 (32-Bit), in my office
together with iCoud for syncing my contacts (about 500) and calenders (2 calenders, about 3.000 and 8.000 entries) with Outlook 2010
The syncing works perfect for 1., 2. an 3., but I have severe problems with the 64bit PC:
The iCloud operating pannel is only displayed after a fresh reset of the system. Two processes are running (iCloud.exe*32, iCloudServices.exe *32), the iCloud icon on the task bar is displayed. Opening of the iCloud operating pannel fails by all means ( via icon, via network->icloud) etc. after Outlook 2010 has started once.
After closing Outlook, a restart of Outlook is perfored but displays "loading data" till infinity. The task manager is required to shut down Outlook.
After a fresh reset outlook starts (normal behavior) and displays the contacts (complete) and both calendars, but has only downloaded during set-up only about 7.000 entries of the 11.000 entries which are still displayed in the calendar of the web interface of iCloud and are displayed nicely on iPhone, iPad and the 32bit PC. The sync of new calendar entries works perfect between all four systems.
I have removed and reinstalled the iCloud operating panel sereal times, checked the Outlook pst file for errors -> no success.
Any suggestions how to overcome this problem?

I had a similar problem back lst year with MobileMe and outlook. I had to uninstall outlook and MM control panel completely then reinstal MM THEN Outlook and then MM would download all 5 of my MM calendars into Outlook including all events
do they stop at a certain date i remember seeing an option somewhere that specified how far back to sync appointments

Persistent sharing problem with Leopard/windows home networking

as new Mac user I am surprised by the user friendly Mac+Leop.
So I assume it must be a bug (xp or leop??)that makes correct networking difficult.
1: The PC-xp sees the Mac and the shared folders but the content of folders is not possible to open nor is it possible to write into the folder
2: shared folders and files on the PC have read and write access from iMac (works correct)
3: error message:
//mycomputer/public is not accessible you may not have permission to use this network resource
Contact the adminstrator of this server to find out if you have access permission
4: my configuration
Lan with iMac2,8/4G OSx10,5,3 + Router + Pc1,6/750M Xp-sp2
5: iMac is configured with
security/firewall set to "allow all incoming connections"
sharing/services set to
file sharing
printer sharing
Windows sharing set
on
shared folders
Public
users set
my account /Read & Write
options selected
share files and folders using SMB
account set to
my account
the info window for Public folder has
Shared Folder - selected
Sharing &Permissions
- custom access
-Name /my account(Me) defined as the owner
-Privilege /read&write
preferences
- apply to enclosed items
6: Pc is configured with
My Network Places/Microsoft Windows Network/Workgroup/
-my iMac/public folder
-my PC/public folder
Any suggestion welcome , I followed already the "simple guide to Leopard/Windows Home Networking" from Mac support but the problem is persistent.
thank you in advance

I'm having a very similar sharing problem. Did you ever get it resolved?

Problem with Remote Desktop on iPad 2 and windows 8.1 pro

I downloaded the Microsoft Remote Desktop app from the App Store on my iPad 2. I typed in the IP address for my windows 8.1 pro computer on my iPad 2 in school to try connecting to my windows 8.1 pro computer at home. I'm having
a hard time doing it. Do I need a rd remote gateway to access my computer from outside my local network. If so, how do I find my gateway server name? Also, I saw somewhere that I have to press accept in a pop up message on the computer your trying to connect
to. Is this true? No one is home during the day and my iPad 2 has to stay in school. Can you please give me a step by step guide with photos to help me connect to my windows 8.1 pro computer from my iPad 2 from school, which is of course outside my local network.

Hi,
Please refer to the document below for the procedure to use Microsoft Remote Desktop APP of IOS APP store.
Getting Started with Remote Desktop Client on iOS:
http://technet.microsoft.com/en-us/library/dn473013.aspx
Roger Lu
TechNet Community Support

Problems with remote app solution suggestion!

Hello,
I have been trying to get the Remote app to work on my windows 8 PC, but to no result. I am using an iPhone 5S. I believe the problem is that my PC is a desktop connected to the internet via ethernet. This is a very common issue. I spent around 5 hours on the phone with apple support, but all I got from them was a very long conversation. Even the senior support supervisor could not help me. Many people use iTunes on PCs that are connected via ethernet and they are unable to use the Remote app because it lacks a very basic and simple feature: to enter the host IP manually. When a PC is connected via ethernet to a router rather than wirelessly it cannot be found by the iPhone as a device that exists in the network, so you need to find it manually. Hopefully some of the higher-ups will hear this simplest of ideas and implement it, so the remote app no longer gets 1 or 2 star reviews saying it does not work.

Welcome to the Apple Community Johnson4o.
That's not correct, homesharing works over wired, wireless and mixed. If you have enabled homesharing correctly on both devices, then there' same problem with your network or settings, there is no need to add manual IP's, in fact there is nowhere to do so.

File sharing problems with T500 and T410 and a desktop all running XP Pro SP3

Others have had similar problems with what appears to be an overriding of Windows file sharing by Access Connections.
My three computers, printers and internet modem are networked and working fine both wired and wirelessly except that while the desktop computer in network places can "see" shared folders on the Thinkpads, access to them is denied. Access to desktop shared folders from the Thinkpads works fine.
All the usual sharing settings have been checked and verified by Microsoft support; it does not so far have a solution.
Could this issue please be addressed more thoroughly and/or suitable documentation referenced? I have read the blurb about Access Connections but can't make a lot of sense of it.
Thanks

When you use the Desktop top menu bar Go/Connect to Server and enter
smb://nameofPC
what happens ?

Problems with Remote key

Hi everybody,
I have problem with key mapping. My table has only one field Name (Text[50]). This field is a display field.
Value Key Mapping of the table is set to Yes.
Problem is that I cannot see the Remote key field among destination fields in Import Manager.
Can anybody help me? Is there something I should set?
Thanks
Tomas

Hello:
This usually happens if you haven't set up any Client Systems. Please go to MDM console -> your Repository -> Admin -> Client Systems. There set your systems as Inbound/Outbound.
Regards
Alejandro

Problems with remote control and user accounts - error 1759?

We're running:
-XP Pro SP2 clients with Zen SP1 IR3a agent, 4.91 SP2 Netware client.
-We are NOT running Middle Tier.
-Novell servers are running Netware 6.5 SP7, E-directory 8.7.3.10b or 8.8.
-Zen server is also SP1 IR3a.
We have no problem using remote control on workstation objects. We are having intermittent issues with remote controlling user objects. When the issue occurs, we receive the following error, "Error 1759: The selected user is not logged in on any workstations" even though the user is in fact logged in. After some more research, it appears that the "networkAddress" attribute of the user object is blank so we feel that this is the root cause. My question is what would cause the networkAddress attribute to randomly not update? For instance we had a user (verified his login) who we could not remote via the user object (workstation object worked). We checked his networkAddress attribute and found that it was empty. User rebooted and logged in again and his networkAddress attribute populated, and then we could remote control him via the user object. Now this isn't always the case after a reboot. There doesn't appear to be any pattern to when the networkAddress attribute does or does not update. In fact, this particular user has a laptop so he boots it up fresh every morning yet he was not showing a network address when he logged in initially today.
We've followed the troubleshooting steps in Novell Documentation without any success. Is there anything else that we might be missing, especially with respect to getting the networkAddress attribute to update? We ran a DSreport on that attribute and found about 500 out of a total of 1500 users had no networkAddress. Some of those are sure to be legitimate but that number is much too high for the number of people that should be in the office.
I've read some older threads on the subject but none of them really provide a firm solution. Also most of the older threads reference Middle Tier which we are not using.
Thanks in advance.

> 4.91 SP2 Netware client.
You could try this TID:
"A user will no longer have an entry in their "Network Address" attribute
even though they are logged into the eDirectory Tree."
http://www.novell.com/support/viewCo...1262&sliceId=1
"Resolution"
"This was fixed in the 4.91 SP3 client. NWFS.SYS was modified so that it
will check the monitor connection on a reconnect and if it is not connected
close the connection and try and get a new monitor connection to the tree.
Prior to the 4.91 SP3 client, the solution is to have the user login again
so that it issues the NDS Finish Login request again that will populate
Network Address again."
Regards
Rolf Lidvall
Swedish Radio (Ltd)

Windows 7 64 bit sharing problems with remote

Similar Messages

Maybe you are looking for