Windows 7 64-bit with C7280

Has anyone got the scanner function to work properly with Windows 7 64-bit?  I have a 64 bit installation and a 32 bit installation.  The 32 bit worked perfectly, and I notice I got the option to use WIA or TWAIN interface.  The 64 bit installation only offers TWAIN, and there's a problem.
When I scan from the document feeder, everything seems fine.  However, if I try to scan from the scanner glass, it complains that documents were removed from the scanner and refuses to let me continue.
Obviously, it's desirable to scan from the glass with stuff that doesn't fit into the feeder.
Anyone got a "silver bullet" that will help here?

it does not matter if it is upgraded from vista or installed on win 7 64 bit. this scanner does not work with win 7. I have tried all the fixes and it will not work. Currently i have nothing hp in my computer and the scanner works from the scan button on the front of the printer. I am now trying to find out how to  save a scan to my computer without hp defective software. right now i am refusing to use hp software on my brand new hard drive. also the scan function does not work in any of 4 programs  that I have tried other than the hp stuff. We are all beating our heads against a brick wall and having hundreds of files needlessly left on our computers.

Similar Messages

  • Weblogic Portal 10.3.2 for Windows 64 bit with OEPE

    Our environment is Windows 64 bit and we are upgrading from Weblogic Portal 9.2 to 10.3.2.
    I have installed Weblogic Portal for 64 bit using generic installer and have also installed OEPE Helios for 64 bit.
    I am not getting Portal perspective in Eclipse?

    These issues are why we dropped every Oracle products for our new projects. We only kept Oracle SGBD.
    Working with Oracle products costs a lot, impose specific tools, impose specific environment (can't work with Windows 7/x64), doesn't integrate in standard toolchains (eclipse, maven, continuous integration, ...). More, you don't have any control on product evolutions and maintenance.
    With this decision we saved a lot of money, a lot of time, quality, and community support is far more powerful than buyers think. Nothing is better than standards!
    Sorry Oracle but I think you need to seriously rethink your commercial behavior and your relationship with J2EE developers.

  • Oracle installation on Windows 64 bit with Intel Xeon

    Hi!
    we have Windows Enterprise Server SP2 <b>64 bit</b> with <b>Intel Xeon</b> processor and would like to install the SOLMAN with Oracle.
    According to the original Oracle-DVD from SAP there are only three possible choise entries:
    a) AMD64
    b) IA64
    c) I386
    But I have the feeeling it should be one choice like "x86" is not?
    Which one should we apply?
    The I386 can be installed indeed, but we are getting the error during the SAPINST-Installation "Oracle software not installed". I thought this entry was only for 32 bit?
    The IA63 Bit can not be installed.
    <b>Only the AMD64 we could install. But the question is, whether AMD is the same to Intel Xeon?</b>
    Thank you very much for any useful help/comments...
    regards

    > Hi!
    >
    > we have Windows Enterprise Server SP2 <b>64 bit</b>
    > with <b>Intel Xeon</b> processor and would like to
    > install the SOLMAN with Oracle.
    >
    > According to the original Oracle-DVD from SAP there
    > are only three possible choise entries:
    > a) AMD64
    > b) IA64
    > c) I386
    AMD64 is the correct one.
    IA64 is "Intel Itanium-2"
    I386 is generic "Intel Pentium (32bit)"
    AMD64 is the generic term for processors supporting EM64T (Intel) or AMD Opteron
    Markus

  • Error during installing BOXI-R2 on Windows 64 Bit with Oracle.

    I am facing these issues while installing BOXI-R2 :
    Environment:
    OS: MS Windows XP Professional x64 Edition Version 2003 u2013 Service Pack 2
    Oracle: 10.2.0.1.0 64 bit for Windows XP
    BO: BOXI-R2 Service Pack 4 - Server Installation with Tomcat. CMS & Audit databases on Oracle.
    Analysis u2013 MS SQL Server 2000 u2013 Analysis Services
    Errors:
    1. The BOXI-R2 installation goes through, but the CMS is unable to connect to the database on Oracle. The error is given below.
    Note:
    I searched for a 64 bit version of BOXI-R2 installer on SAP Support website but couldnu2019t locate one.
    Appreciate any help in this regard. Thanks a ton for reading and replying.
    - Steve
    Event Type:     Error
    Event Source:     BusinessObjects_CMS
    Event Category:     Services
    Event ID:     35101
    Date:          30/06/2009
    Time:          10:54:54
    User:          N/A
    Computer:     LEPUS
    Description:
    The root server reported an error Initialization Failure. (Reason: The database subsystem could not be loaded. Make sure that the database client is installed. The message returned was The library named OracleDatabaseSubSystem could not be loaded. The system error message is Loading shared object failed. First tried to load library OracleDatabaseSubSystem and failed because of error: [The root server reported an error Initialization Failure.
    Second tried to load library OracleDatabaseSubSystem.dll and failed because of error: [The operation completed successfully.
    ]..). is not a valid Win32 application.

    Hello Steve,
    I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
    This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
    It is monitored by qualified technicians and you will get a faster response there.
    Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
    Best regards,
    Falk

  • How do I install Elements for Windows 7 PC with 64 bit? Get error message - file archive part missing

    We purchased Elements 12 and Premiere Elements 12 on September 7, 2014 and have tried a variety of things including searching through FAQs on the Adobe site, etc. etc. and cannot get our downloads to work. We are avid computer users and have never had problems downloading software before.
    From our account under "orders" - I have tried clicking on the Akamai download manager and the Alternate Download Method on for each application with the same results.
    We have a Windows 7 PC with a 64 bit operating system and Internet Explorer 11.
    On all attempts we get an Adobe screen with 2 links – 1 for a file ending in .7z and a 2nd file ending in .exe.
    I click on the first file and confirm the download completes at 100% (not paused, etc.) and is in the downloads folder for my user name on the PC.
    I click on the 2nd link for .exe and I receive the error message below – 2nd screen shot – “file archive is missing” all folders/files must be in same folder.
    So I see it’s a winzip file (as a winzip pop up folder had come up also) so I download the free version and unzip the files in the same downloads folder under my user name to try that.
    I click on .exe file link again and same message. I tried copying the files directly to the downloads folder (as they all unzipped into a subfolder called PSE 12 and tried clicking on .exe again but get the same message.
    For Premiere I tried the same and got same results on the 64 bit version download.
    I do not know how to access the software we purchased.
    Any help or advice is appreciated.
    Also - if anyone knows how I can contact Adobe for a full refund so I can just buy the boxed software instead - that would be helpful as well as that is not easy to find online either.
    Thanks!
    Ariel

    I get an error message saying that the quicktime installer will only work on 32 bit
    The QuickTime player works on 64-bit systems. (It's a 32-bit application, but it should run fine using the standard 32-bit-on-64-bit Windows-on-Windows emulation.)
    What's the precise text of your installation error message, dc? (There one or two different ones I can think of that might mention 32-bit)

  • How to install windows 8.1 64 bit with a DVD

    has anyone found a workaround to install windows 8.1 64 bit with a retail DVD?

    Gotcha!!
    I am done with mounting a secondary HDD (thanks to ifixit) and installing Windows 8 Pro 64 bit on it without a worry. Charm, charm!!
    Boot Camp 5 guide prescribes all needed steps and when read and used correctly, installation must be an easy task. And all the existing apple hardwares work so good in the Windows environment too.
    I am going to help out a friend of mine in doing a similar thing on his mac too. If you got specific questions, please do shoot up here and i should be able to get a reply to it (if at all).
    Thanks everyone.
    ~ Narey

  • Windows 7 64-bit with Boot Camp 5: keyboard & mouse don't work

    Running OS-X 10.8.5 on iMac 27 Late 2013. Everything goes smoothly installing Windows 7 64-bit with Boot Camp 5.0.4 until Windows does its final reboot (after a complete, apparently successful install), and begins the Windows setup sequence. The first setup screen asks for User name and PC name. My mouse and keyboard do not work at this point. Tried cold rebooting: Windows boots up, detects it needs to do first use setup, and gets to same failure point.
    NOTE: I have never had a chance to install the Windows support drivers; but the mouse and keyboard worked through out the istallation.
    I've tried two different W7 versions: 64-bit Pro and 64-bit Enterprise [Enterprise is not supported, but I have installed it on an iMac 27 2010, and a MacBook Air 2013.]. Both versions of W7 hang at the same point described above.
    I've tried a Windows DVD install disk  plus Windows support drivers on a flash drive; and I've tried a bootable flash drive with everything on it. Both fail at the same point.
    I have tried both wireless and USB keyboards and mouse. Same failure.
    I have even tried removing the flash drive with Windows support drivers before the final reboot. Same failure.
    NOTE: when I reboot in OS-X and go to the Startup Disk, the windows option says "Untitled Windows" instead of Boot Camp; but I can select it, and it starts the Windows boot which ends up at the same Windows setup failure point.
    Has anyone had the same problem?
    Has anyone succeeded? If so, any special actions or ideas?

    The issue may be related to the iMac 2013 only having USB 3.0 ports and that windows 7 does not come with drivers for it. Try the following (borrowed from answer on Mac Rumors Forums http://forums.macrumors.com/showthread.php?t=1659481):
    <quote>
    If you run into issues with keyboard and mouse not working (due to USB 3.0 and Win 7 incompatibility), you need to run your Win 7 partition (and Win 7 installation disk/partition) in legacy mode. (I found this information at:http://twocanoes.com/winclone/support#faq123 - see "Method using Terminal"). Here you will be setting the legacy on the installation volume of win 7, not bootcamp partition (yet). After running the diskutil list find the volume with installer of Win 7, and then run the command (substituting the disk1s2 below with the information you find through diskutil on your computer:
    sudo /usr/sbin/bless --device /dev/disk1s2 --setBoot --nextonly --legacy
    Enter administrative password when prompted. Next, select Restart from the Apple menu. Do not hold the Option key while restarting.
    You should have mouse/keyboard working. Begin the Windows 7 installation. Upon first restart right after the installer completes, boot into Mac and set the legacy mode for the BootCamp partition (but this time without the --nextonly flag), so you can use keyboard/mouse to complete the installation and thereafter until the USB 3.0 drivers are installed).
    </quote>

  • I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders

    I am using Lightroom 5.7, 64 bit with Windows 7 Professional. For no apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now I notice that my LR directory of folders in Library view does not show images correctly: If there is a folder with sub-folder(s), the folder will indicate 0 images, but the sub-folders show the proper number of images. What happened and is there a fix? I tried uninstalling Lightroom and re-installing, but problem persists.
    Here is a screen shot of the error message:
    Message was edited by: Joseph Costanza, Jr.

    See here for a solution.

  • How to install when I keep getting the following massage  on windows 7 64 bit with or with firewall on and vwith or with virus protection on  here is post  This installation package could net be opened verify that the package exist and that you can access

    how to install when I keep getting the following massage  on windows 7 64 bit with or with firewall on and with or with virus protection on  here is post           " This installation package could net be opened verify that the package exist and that you can access"  same when trying to install quicktime

    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/quicktime/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Hotsync with bluetooth or network from TX to Windows 7 Professional 64 bit (with XP option)

    Hello!
    I have read and tried to follow the posts on these support boards plus hints given by Palm about this predicament.  I think I have set up the TX for both Bluetooth and local wireless network.  However, even if the TX recognizes my computer, it will NOT hot sync using either method.  With one method there are issues with the virtual serial ports.  No matter which port I choose the message always says it cannot hot sync because the port is in use by another program.  HELP!!
    I can't begin to tell you how many hours I have spent trying to get the first hot sync to work.  MOST FRUSTRATING.  Please help me out.  I understand the USB connection is out with a 64 bit Windows 7,  But I do have the option of the WIndows XP mode with my Windows 7 Professional (one reason I bought this edition of Win 7).
    I love my TX and want to be able to use it with the  new computer.  I look forward to your combined expertise.  Thank you in advance.
    JMS in Malta, NY
    Post relates to: Palm TX

    you need,
    Windows 98, Windows 2000, Windows NT 4.0 with Service Pack 4, 5, or 6a, or Windows Millennium
    Microsoft Windows 98/Millennium/2000/NT 4.0 (Service Pack 4, 5, or 6a required)

  • Does anyone know if Appleworks 6.2(education version) will run on windows 7 64 bit? I have it running on 32 bit with no problem.

    Does anyone know if Appleworks 6.2 (education version)will run on windows 7 64 bit? I have it running on 32 bit with no problem.

    It runs fine on 64 bit. I have it running on Windows 8 Pro 64 bit. Just have Quicktime installed first otherwise the install will fail. Sorry for the late reply.

  • I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

    i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

    Kappy wrote:
    Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
    You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
    http://support.apple.com/kb/DL1638
    Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

  • Music skips on Windows 8.1 64-bit with iTunes 12.1

    Okay, this is probably going to sound strange, but its true.....
    When I am listening to music in iTunes 12.1 and I have Google Chrome opened, the music skips. I can open any other application and not have that problem, just only when Chrome is opened. Needless to say, I switched to Firefox and now the music does not skip. Has anyone else experienced this?
    My PC specs:
    Windows 8.1 64-bit
    AMD A6-3620 (4 CPUs) ~ 2.2GHz
    NVidia Geforce GTX 550 Ti (4GB memory) Dedicated Graphics Card
    8GB RAM
    Sound Blaster Audigy Fx Dedicated Sound Card
    1920x1080 screen resolution

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The section Install missing components may allow you to install Apple Application Support.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • How to dual boot window 8.1 64 bit with xp sp1?

    Hello Hp PC Experts,
    Sir i was bought HP 15-r119TU two week  ago. So i face problem of dual boot with this HP note book. I need dual boot  window 8.1 64 bit with XP SP1. Kindly help me at the earliest possible.

    @mp56 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Trouble connecting to windows 8.1 64 bit with my nano 6th generation

    Help required to sync my nano to my computer

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The section Install missing components may allow you to install Apple Application Support.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

Maybe you are looking for