Windows 7 64 bit won't install quicktime or itunes PLEASE HELP!!!!!!!!!!!

I have tried installing the new quicktime and itunes on my computer and have had no success.
they both give an error message which looks like its saying that its not 32 bit when i quite obviously downloaded the 64 bit install file.
the error message i have provided is from quicktime.
http://www.postimage.org/image.php?v=gxcpYP9
i have tried uninstalling everything then installing quicktime first then itunes, and vice versa but both give this message.
PLEASE HELP

In the Device Manager see if the 1022 is listed under Other devices.
Under "Other devices" right click on HP 1022
Select "Update Driver Software...."
Select "Browse my computer for driver software"
Select "Let me pick from a list of device drivers on my computer"
Select "Printers" > Next
Under "Manufactures" > HP
Under "Printers" > HP Laserjet 1020
Select "Yes" to warning popup
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

Hp laserjet 1022 windows 7 (64 bit) won't install printer, what can i do?

1. HP LaserJet 1022 Printer
2. Windows 7 64-bit
3. No Error Message
4. The only changes made to the system are security upgrades from Windows Updater. This is a new computer and the old one was running XP.
I have tried removing the printer, downloading newer software (lj1020-HB-pnp-WIN64-en) and trying to install it, adding the printer through windows and still the printer will not work. The cd version will run until it asks you to plug in the printer and then nothing happens. I even tried leaving it running overnight to see if it would find it and install, but nothing happened. This printer is a workhorse for me and I would like to keep it running, any suggestions on getting this printer recognized and running again?
This question was solved.
View Solution.

In the Device Manager see if the 1022 is listed under Other devices.
Under "Other devices" right click on HP 1022
Select "Update Driver Software...."
Select "Browse my computer for driver software"
Select "Let me pick from a list of device drivers on my computer"
Select "Printers" > Next
Under "Manufactures" > HP
Under "Printers" > HP Laserjet 1020
Select "Yes" to warning popup
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Rescue and Recovery 4.3 on Windows 7 64 bit won't install

Hi,
I had to reinstall my Windows 7 and when I did that I accidentally wiped away the Recovery partition. I didn't think this would be a problem but now I am trying to install Rescue and Recovery 4.3 on Windows 7 64 bit and I keep getting this error
"Error 25014. There was an error installing the Rescue and Recovery boot manager. Return code: 6"
I am wondering why I am getting this error and how I can install Rescue and Recovery 4.3?

Hi,
can you also specify, how did you installed Win7?
Using Recovery CDs? or?
Note, that RnR needs to modify the boot loder of Windows and if the access is blocked, due to permissions, then this situation of course will happen.
However, there is also a second option, on how to get RnR installed and this is using a command line installation which will NOT install the RnR partition.
NOTE: the change in the boot loder is needed only for the creation of this RnR partition.
For more info, please read the following RnR manual:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/rnr43dg.pdf
Feel free to ask any other question.
Cheers

Installing Quicktime and Itunes please please help

So I got a nano and can't install it. whenver I try to intall it it says that I don't have permission to access the apple computer registry in my pc (windows Xp), so I can't install it at all. I have tryed to change the permission settings but it still won't allow me to do it. Im an administrator and all.
please help. any suggestions wold be greatly appreciated

Try logging in as another user on your computer that has Administrator permissions. If you don't have another user create on.
Mark

IOS 5 won't install!!! Please help!!

The other day, I up dated my iPad and iPhone (because I'm a developer) to iOS 5.0 GM (Golden Master). Today, when Apple released the final version via iTunes, I clicked "Check for Update" and it said for both devices they are "Up to Date". So I figured "Lets try a restore". Well, it download the firmware, but when it went to install it, it said that "This device isn't eligible for the requested build". What can I do to fix this? Should I try to downgrade the devices, or will that brick them? Please help!

You still need to answer steadman's question - which model of iPod Touch have you got? What does the model number on the back of the iPod say?
I have the newest iPod touch does not answer the question.

IPod iTunes won't sync with computer iTunes - please help

Hi,
I recently purchased an album on iTunes wireless (Maroon 5 - highly recommended) and when I connected my iPod to iTunes to sync the songs did not transfer to my computer's iTunes. Nothing happened basically.
I've read the manual that says that they should sync automatically but nothing that I've tried works.
My setting is for manual sync and transfer of songs and I would really like to keep it like that since I don't want all my iTunes library to be dumped into my newly purchased iPod Touch. PLEASE HELP
Thanks,
Tal

If you manually manage your music it won't automatically sync your Maroon 5. Connect the Touch, right click on it in the Source frame under devices, then select transfer purchases.

Can not keep pop up window for installing adobe flash player, won't install or go away, please help

Can not keep pop up window to install adobe flash player. will not allow or allow. what's going on?

What is your operating system & version?
What is your web browser?
Please post a screenshot of that pop-up window.
[topic moved to Flash Player forum]

Windows 7 64 Bit system will not update to iTunes 7 - Help please!

Hello -
I've been trying to update my iTunes since July and have been unable to do so. I think the last time I installed a version of iTunes was in May. I've tried everything and anything I could find on the web but nothing works!
I have a Windows 7 PC 64 bit laptop.
Everytime I try to update I get the error message "the installer encountered errors before the installation could be completed".
I've already tried:
- Downloading directly from apple site
- Downloading the update only then installing
- Made a new user account on my computer to try install
- Uninstalled everything and started fresh
- Disk Clean up's
- Turned off Anti-Virus
- Restarting computer and more...
Does anybody have any suggestions!? It's driving me crazy not being able to sync my iphone 4! I'm starting to think it's just not compatable...
PS - I am able to install older version of iTunes, but my iphone 4 is not compatable since i've upgraded to iOS6

Hi rrfhp,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand none of the HP drivers will fully install.
I will be happy to help you.
Are you signed in as the Administrator of the computer?
I would turn off all start up programs to make sure there isn't something blocking the printer.
Click on start, in the search box type in run, enter, then type in msconfig, click OK.
Click the Services tab.
Click to select the Hide All Microsoft Services check box.
Click Disable All, and then click OK.
Then click on the start up tab at the top.
Click on disable all.
Reboot the computer.
Temporarily turn off any Antivirus software.
Then run the installation again by right clicking on the setup and selecting run as Admininstrator.
Don't connect the USB cable until prompted.
Try printing now.
Then go back into msconfig and enable the All Microsoft Services and enable all on the start up tab.
Turn the Antivirus software back on again.
Please let me know the results if you are still having issues.
Are you getting any error messages?
Thank you for posting on the HP Forums.
Have a nice day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP PSC 1350 All-In-One won't install on Macbook Pro, PLEASE HELP!! :(

Hi all
I know this has been covered before, but I've done SO many Google searches I just can't think of any other keyword combinations so I'm hoping someone can advise.
I'm running the latest version of OS X, and when I first plugged in the printer via USB, it auto-detected, searched for and installed drivers, after which the printer showed up under Print & Fax, but as a 1300 and not a 1350.
When I proceeded to print from MS Word, the job showed up in the print queue, but it didn't print, and when I opened up the print queue it said the printer was idle - but it WASN'T!
So I proceeded to 'reset the printing system.' After this, I can't even add the printer! Print & Fax refuses to even REGISTER that the printer is connected...
I'm about to pull my hair out - I've banged my head against the wall for SO long trying to make this work, first through a network with my Windows XP PC, and now via a direct connection via USB after rearranging my WHOLE office... If someone could advise I would greatly appreciate it!
Thanks,
Eye.

I had that exact model MFD. You should know two things:
1 it is no longer fully supported. It reports as a 1300 and often doesn't work very well. You can print, after a fashion, using HP's official drivers, but you will get much better results (and drivers which actually see the **** MFD!) from drivers available at the HPIJS Project. <http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpij s%23Printers>. The drivers there are mostly developed by HP employees but are NOT offered on HP's site and are NOT given to Apple by HP to be included in printer driver updates. You guess as to why this is, given that they behave much better than HP's official drivers and have since Tiger, is as good as mine. Note that installing the HPIJS drivers turns your MFD into a PostScript (clone) device! Your output is noticeably superior to that produced by the official drivers, and your level of control over that output is increased. (It's also slower, and the PSC1350 was never fast...)
2 while you can print from the PSC1350, you cannot scan. Not under either Leopard or Snow Leopard. VueScan may support the PSC1350 now, I don't know, I bailed a long time ago. I do know that the HP scan software breaks, hard, under Leopard and will not install in Snow Leopard. Note that HP has (finally!) released print drivers for the PSC1350 so that you can print from Leopard and Snow Leopard; when Leopard came out, the only way to print using that device was was to use the HPIJS drivers... and for the first 2-3 months after Leopard arrived, the version of GhostScript that the HPIJS drivers used was broken on Leopard, so it wasn't possible to print at all. My PSC1350 was a paperweight. When I contacted HP's tech support they said in so many words that the MFD was no longer supported either under Leopard or Vista and that I should either use older OSes or get a new printer. I did. I got a Brother. Brother USA Sales should send HP Tech Support flowers.
HP's software for this device is profoundly broken.

I've upgraded to FF4 uing windows 7 64-bit - won't open when click on shortcut, have tried to reinstall etc, prev ok with version 3+

I've upgraded to FF4 uing windows 7 64-bit - won't open when click on shortcut, have tried to reinstall etc, prev ok with version 3+

I found something that could be a workaround ... wel at least it's gotten me one step further (windows 7 now recognizes the scanner as the right device (symbol usb sync cradle), but step 8 keeps failing.
source : http://www.pocketpcjunkies.com/Uwe/Forum.aspx/wince/5660/Windows-CE-5-or-6-with-Vista-and-Windows-Mobile-Device-Center
1. Install WMDC 6.
2. Plus the Windows CE based device.
3. Close the "Found new hardware" wizard.
4. Right-click on "Computer" and select "Manage"
5. Open the Device Manager, then select the Windows CE based device.
6. Right-click and select "Update driver..."
7. In the wizard, select "pick from a list..."
8. In the list, select "Microsoft USB Sync [Microsoft]".
9. ... nothing else! It works!
Anything else I could try now?The first time I tried step 8, the microsoft usb sync driver was in the list but I got an error while updating the driver. The second time, it didn't appear on the list anymore. I'm thinking this is more of a 64-bit driver problem.
Thanks, Joachim

IMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso

iMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso. I select the file and the hit return as in step 8 of the Creating an
iSO image document but the box that should open to select use iso does not open. How should I proceed?

The Mac SuperDrive built into your Mac is the Optical drive.
1. Insert your Windows DVD in Optical drive. Disconnect any external storage.
2. Insert a USB2 Flash drive. This will be used to hold the BC drivers.
3. Start BCA. Check the options to download software and Install Windows. You do not need to download Windows. The BCA will download the BC drivers to the USB.
4. Partition your drive.
5. You can see the Windows installer screens at https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2.

Windows 7 64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install any help?

windows 7 64 bit will not install itunes..it tries to install and keeps telling quick time for windows did not properly install any help?

Hi Tamekia,
I am sorry to hear nothing has worked yet. I have looked up some additional information and possible solutions. Follow the steps in this document to perform a level-three uninstall, register the Windows Installer Service, and then reinstall the HP software. An uninstall and reinstall of the software deletes and overwrites any of the files that might cause the error and resets the Windows Installer. HP recommends that you download the latest software from the HP Web site to remove any files that might be causing this error.
Level-three uninstall, and register the Windows Installer Service
Note: The title of this document is not specific to the issue you are experiencing or the operating system you have, but the 3 steps and instructions are what I suggest we do to resolve the issue you are experiencing.
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha

My itunes won't install the new itunes. I keep getting error messages that seem to be linked to MobileMe service which I don't even know what it is.

my itunes won't install the new itunes. I keep getting error messages that seem to be linked to MobileMe service which I don't even know what it is.

Read this:
iTunes 11.1.4 for Windows - Unable to install or open - MSVCR80 issue

HT1926 A window pops up and says "iTunes was installed incorrectly. Please reinstall iTunes. Error 7 (Windows error 127)" and i've installed the newest iTunes twice. ??

A window pops up and says "iTunes was installed incorrectly. Please reinstall iTunes. Error 7 (Windows error 127)" and i've installed the newest iTunes twice. ?? really hoping to fix this without deleting all of my music...

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99425)

Windows 7 64 bit won't install quicktime or itunes PLEASE HELP!!!!!!!!!!!

Similar Messages

Maybe you are looking for