Windows 7 64bit has an MTP USB Device Failed error message when I attach my Ipad1

I keep getting an MTP USB Device Failed error message when I plug in my USB cable into my Ipad1. Can someone help?

This is NOT resolved. The "Upper..."Key in the registry editor doesn't exist as you can see below in the image I am providing. This is still an OUTSTANDING issue, can someone please help with resolving this issue, super frustrating.
This is not just an iPAD issue, I get the same problem with my iPhone as well, both (iPhone and iPad) have the latest iOS 6.1.3 installed as well.

Similar Messages

Mtp usb device failed error - iphone 3g - win 7 pro

I have iphone 3g. I use Win 7 pro OS. when i plug in iphone to usb port, i get error message as - device driver failed to install - in detail - mtp usb device failed..
In iTUNES i am able to view the iphone, sync my contacts with MS outlook etc..
kindly help
shansui

What a load of hogwash.
I've just had this error come up - WITH NO CHANGE OTHER THAN UPGRADE OF IPHONE 4 TO IOS 5.1.1.
(running iTunes 10.6.1.7 on 64 Win7)
Powered phone off, and back on again - same error... Haven't had to reinstall windows in a few years - maybe iTunes is now the least stable software in my collection - Might have to try the two (button) salute to Apple...
Error on device "MTP USB Device";
"This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

Help MTP usb device failed N97

When connected N97 via cable to pc ( windows 7 ) " MTP usb device failed" and cant see N97 in Pc suite. In mass storage mode work fine.
Please HELP.

Download ovi suite for n97 and your issue will be resolved.
When u connect ur n97 for the first time after installation make sure to press install on whatever the phone is being prompted to install. Oh and one more thing .. make sure you restart your phone and your pc before doing all this
Message Edited by agha_ali on 31-Jan-2010 11:11 AM

Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

Try the troubleshooting tips here:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
You may have something in your project on one of the slides that is tripping up the publishing process.

"USB Device Not Recognized" Message when connecting iPod Nano

I get the following windows pop up when connecting my son's iPod Nano
*"USB Device Not Recognized"*
*One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it. For assistance in solving this problem, click this message.*
I have successfully connected this device to this computer before so I don't know what has changed.
Message was edited by: ipodnannouser

This did not work for me. I have a laptop that was running Windows XP, and it had no problems recognizing the iPod. I was having problems with XP, and rather then reinstall XP, I did a clean install of Vista. I did a settings transfer, so the new install of iTunes came already configured--I mention this since I don't know if it was a factor.
When I plugged in the iPod, I got the USB Device Not Recognized. The usbstor.inf file did not fix the problem. However, the solution at http://www.winvistabeta.com/groups/275128/ipod-usb-device-not-recognized/message .aspx did fix the problem. Do this:
Reset the iPod:
1. Unplug the iPod.
2. Turn the hold switch to HOLD and then back to off.
3. Hold the Center and Menu buttons for 6 seconds until you get the Apple logo when you release them.
4. Plug in the iPod. It should now be recognized.
This worked fine for me the first time. Thanks! Jack

We are receiving a "Secure Connection Failed" error message when using Firefox Version 37.01. What is the remedy?

We have multiple websites that do not launch now as a result of the recent upgrade from Firefox version 36.04 to version 37.01. We received "Secure Connection Failed" error messages which indicate that the connection was interrupted while the page was loading, and that the page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Please explain why this is happening, and if a fix will be issued soon by Mozilla, as everything was operating normally prior to the most recent Firefox upgrade. Alternatively, please identify browser settings that can/should be changed in order for Firefox to access these basic Internet sites (that are completely accessible using other browsers such as IE and Google Chrome). Thank you.

''rahuldecoded [[#answer-718441|said]]''
<blockquote>
https://support.mozilla.org/en-US/kb/secure-connection-failed-error-message
</blockquote>
FYI, I work with the original poster. I looked at the suggestions on that page but none were the issue. Then I found this thread:
https://support.mozilla.org/en-US/questions/1056488
And that appears to be the problem we and others are having.

Getting 'USB device not recognized' message when I never did before.

Hi there
I am constantly getting a USB device not recognized when I plug in my nano. I never got this before and as a result all it does is charge. It is not showing up in iTunes anymore so I cannot remove or dowload new songs on to my nano anymore. I have tried to go into control panel and the USB Hub device manager to deselect the power outage option but that did nothing. Please help! I seem to encounter trouble with any accessories Apple sell, whether they be earphones or USB cables.
Thanks

i'm getting the same problem too.
my ipod is nearly about 1 year old.
i use my ipod nano 2GB for music and as a flashdrive to store my uni work.
this morning accessing my files in the ipod on the computer was fine.
then later in the afternoon when i connected it into a computer i keep getting the msg 'usb device not recognised'. also itunes dont recognise my ipod either anymore.
i use Windows XP at home and uni.
i've tried my ipod on at least three different computers at uni and just tried at home.
same msg came up 'unknown device' from windows.
i've read the other posts in the forum and it mentioned about 5 R's and resetting it.
BUT the main problem is i DONT have any back up of my uni work and files and they are really really important so i CANT reset the ipod otherwise i will lose all the important things...my assignments, projects, photos...I was meant to make a back up b4 i start uni next monday but i guess now is TOO LATE.
I've noticed that the socket of the ipod dock conector to usb cable, that connects to the ipod is slightly split open.
Would this be causing the problem?
I am in Utter Despair and Desperation at the moment.
Can anyone help me PLEASE?
i would be sooooo grateful for your kind help and time.
kind regards,
a student who is on the verge of a breakdown due to this problem.
Windows XP Packard Bell

"Connect to SAP gateway failed" error message when we connecting bex to bw

any one can help in connecting bex with BW.
we got a error when we are trying to connect bex to bw from offshore. as we do not have basis consultant we only need to connect bex with BW.
"Connect to SAP gateway failed".
RFC_ERROR_COMMUNICATION
But it is working properly connecting to onsite team.
this is the first time we are connecting from offshore.

You didnt answer the first question of when exactly are you getting this error message - during direct logon to BEx or using transaction RRMX. Anyways, I assume both are giving the error.
Check how the SAP logon pad is configured to access the BW server currently.
In our case the problem was resolved by using the server machine name instead of the IP address to logon to the BW server.
If you are currently using the IP address in the logon pad then change it to the server machine name instead.
Also, make this entry in your hosts file (windows>system32>drivers>etc>hosts) add an entry like:
<IP Address> <bw_server_machine_name>
save the file, reboot the system and then try logging onto BEx again.
If it still does not work - send me screenshots of the logon pad configuration you have for the BW server.
Hope this helps,
Regards,
Nikhil
Message was edited by: Nikhil Chowdhary

Windows 8.1 probably the disc is full- error message when i try to save and open a file i downloaded.

I am trying to download a program from the internet and I save it to my download folder. when I try to save it or open it, I get an error message saying probably the disc is full. this is a new computer with plenty of disc space available.

I am trying to download a program from the internet and I save it to my download folder. when I try to save it or open it, I get an error message saying probably the disc is full. this is a new computer with plenty of disc space available.
how much free space on C: do you have available?
you may need a NAS to move some previous downloads too etc
Corsair Carbide 300R with TX850V2
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 660 Ti FTW Signature 2 (GK104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Professional x64
Microsoft Wireless Desktop 2000 & Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

TS1538 MTP USB device failed

My laptop cant installed automatic install usg software for iphone4S MTP and some other base syetems Device are saying no driver found.
pls find for me soliution .
thanks

You may have to reinstall the drivers,
Make sure you have an active data connection
Plug in the phone
Hit WINDOWS+PAUSE/BREAK
Select device manager (top left)
Find the device, it will probably have a yellow triangle with exclamation or question mark
Right click the device and select uninstall, opt to remove files if asked
Unplug the phone and re-attach
make _sure_ driver install completes and do not remove again unless you are certain it has
Should be fine now
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Mtp usb device failed

failed to recognise my lumia 830.on my pc.I use windows 7 .No lumia boot mgr.finally says driver installation failed.help please.I bought my phone yesterday

Hi, ray008. In addition to what farby said, you can also check this link: http://www.microsoft.com/en-us/mobile/support/faq/?action=singleTopic&topic=FA141649. The link will work regardless of your location. Make sure that you are using the USB cable that came with the phone. Also, try connecting it to a different port. Keep us posted.

Network authentication failed error message when trying to send picture messages

I have a family member who is trying to send picture messages from Dubois, WY. Verizon's map shows that Dubois is in the extended enhanced services area. I am guessing that this may be one of those instances where the coverage map is not 100% accurate. Please let me know if you have any other ideas or suggestions as to what the problem might be or how to resolve it.

Customers have the ability to take pictures / videos anywhere. However, messages can only be sent, received, or uploaded, while in the Verizon Wireless National Enhanced Services Rate and Extended Network Coverage Area.
Try dialing *228 send and option 2 to update the PRL on the phone. Updating the PRL or Preferred Roaming List, ensures the phone is getting the best service possible.
You can also check the coverage area at the link below:
http://www.verizonwireless.com/b2c/CoverageLocatorController?market=all

IPad2 on Windows 7 : MTP USB Device = This device cannot start. (Code 10)

Hi Guys,
I want to access to the Internal Storage of my iPad 2 on Windows 7.
But I have an error with the MTP USB Device => This device cannot start. (Code 10)
So I cannot see my iPad in Windows Explorer.
I tried many actions from Forums :
update the driver to the "Apple Mobile Device USB Driver" located in "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers"
delete the upper and lower filters in REGEDIT : {36FC9E60-C465-11CF-8056-444553540000}.
stop and restart the service "Apple Mobile Device"
But as soon as I connect again the iPad there is the same error message after Installing device driver software => "Device driver software was not successfully installed" : MTP USB Device : Fail
Is there someone who get the solution ?
Thank you for you help
Stephane

I have a similar problem, only mine is Code 31 for the MTP USB Driver. The Apple driver loads fine, and I'm able to sync with iTunes, but I can't connect to the device as a drive and copy the photos off of it.
I've tried nearly everything at this point that has been suggested in other threads, and nothing has seemed to work.

Ipad4 connection MTP USB device error with Windows 7 64 bit

I have recently bought iPad 4. When I connected to my computer through USB running Windows 7 Professional 64 bit i got the following error message
"MTP USB Device failed to install"
Please guige me

Hello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G

N97 MTP USB Device

Before I upgraded my N97 Firmware to 21.01.045 My pc windows 7 saw my phone as N97 when i would open a window to explore the phone contents, and when I would copy a video onto my phone it would convert it when it's copying it onto my phone automatically.
After the update-I had problems when ever I connected my phone to the pc USB, telling me the MTP USB Device failed.
But then all of a sudden few days later the MTP USB was successful but it again saw my phone as N96, BUT NOW it does NOT copy the videos as it used to, I have to go through Windows Media Player to transfer videos to my phone.
Inconvinent...

Solved by repairing installation of Nokia Suite. I'm using version 3.3 of nokia suite on a windows 7 ultimate operating system. Needed this step to update firmware.After many attempts I finally overcame this problem by going to control panel>uninstall a program>scroll to nokia suite>select uninstall/change>dialog asks if you want to repair or uninstall>select repair.
*Please make sure of the fllg:
>phone must be on
>MUST be connected in PC Suite mode - If your phone tries to connect to internet or wlan, keep hitting cancel till it asks you to select (PC Suite) mode.
>Windows may try to install drivers and you'll see MTP usb device installation Failed - ignore for now
>Make sure the internet connection on your PC is active
>NOW do the repair-install as described above
>During repair windows will again install your device drivers, and this time you should be good to go
Hope this helps someone, and saves them the many hours I took to get this right.

Windows 7 64bit has an MTP USB Device Failed error message when I attach my Ipad1

Similar Messages

Maybe you are looking for