Windows 7 64bit Install error microsoft.vc80.CRT,type="win32",version="8.0.50727.4053",publicKeyToken="1fc8b3 b9a1e8e3b",processorArchitecture="amd64"
How do i fix this install error. Very fustrating.
Not sure if this is the ideal solution but worked just fine. I simply reinstalled Windows 7 using pre-delivered Microsoft functionality. Upon sucessful reinstall Itunes latset version worked just fine. It is a shame Apple supoort could not have recommended this solution in teh first intance.
Similar Messages
-
I have this error pop up while almost done installing, "An error occurred during the installation of assemble 'Microsoft.VC80.CRT,type="win32",version="8.0.50727.4053",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="amd64"". HRESULT: 0x80070422
OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I've had itunes on my computer previously, but when I tried to update it, I was forced to uninstall it, then tried to reinstall and it keeps giving me this error:
microsoft.vc80.crt.type="win32".version="8.0.50727.6195".publickeytoken="1fc8b9a 1e18e3b".processorarchitecture="amd64"
I've tried uninstalling all the programs that come with it multiple times, and I don't know what to do now, please help!!!!Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
At first i got a problem with my Apple Mobile Device Support, but then after i've done some research browsing the net on how to fix that problem, i've finally found the solution to that problem... However, after I've finish installing and trying to run ITunes, there's a pop up says Error 2 , Apple Application Support is needed to run ITunes.... So i've followed the instruction and suggestions given out which is to extract my iTunes64Setup and install Apple Application Support standalone manually, but during the installation, an error pops out that really really really could give me cancer.... the error goes like this-
""An error occured during the instilation of assembly "Microsoft.VC80.CRT,type+"win32",version="8.0.50727.6195"publicKeyToken="1fc8b3 b9a1e18e3b",processorArchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x80070BC9.""
God knows how many times i've reinstalled Itunes, and how many pages i've been thruu just to look for a solution to this problem..... PLEASE HELP ME IM BEGGING YOU TO WHOEVER HAVE ANY IDEA ON HOW TO FIX THIS T^T
Im running on Window 7 ultimate 64-bit btw...OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
I am trying to install the latest iTunes update using Windows 7. I have tried uninstalling the itunes program an reinstalling but I keep getting this error message "Microsoft.VC80.CRT,type='win32'.version='8#0#50727#4053',publicKey Token='1fc8b3b9a1e18e3b',precessorArchitect='amd64''..
same problem. tried the ff fixes from microsoft but no joy
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
other ideas would be appreciated.
cheers -
'Microsoft.VC80.CRT,type="win32",version="8.0.50727.6195",publicKeyToken="1fc8b3 b9a1e18e3b",processo rArchitacture="x86"'. Please refer to Help and Support for more information. HRESULT: 0x8007054F.
this problem, how to solve it? I tried install, reinstall, uninstall so many times already...Not sure if this is the ideal solution but worked just fine. I simply reinstalled Windows 7 using pre-delivered Microsoft functionality. Upon sucessful reinstall Itunes latset version worked just fine. It is a shame Apple supoort could not have recommended this solution in teh first intance.
-
Hi,
I cannot install iTunes after an update went wrong. Seen another with exact same problem but without an answer. Error message is:
'Microsoft.VC80.CRT,type="win32",version="8.0.50727.6195",publicKeyToken="",proc essorArchitecture="x86'". Please refer to Help and Support for more information. HRESULT: 0x800736FDOK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I'm trying to download itunes but everytime an error comes up that says that^^^.After another error comes up that says "Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start sysrem services." Can anyone help me?
OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
when i install itunes64
microsoft.VC80.CRT,tupe="win32",version="8.0.50727.6195",publicKeytoken="1fc8b3b 9a1e18e3b",processorArchitecture="x86",hresult:0x80070BC9
whats wrong,my system is win7 64bithresult: 0x80070BC9
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80070BC9, or some other number? (If they're another number, what number are you getting?) -
I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.4053,public key token....."HResult 0X8007054f
I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
Why I cant Install itunes in my windows 8? error appears and it says:
error microsoft. vc80.crt type="win32".version="8.0.50727.6195"
please healp meThese ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
Cannot install itunes Keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and sup
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
'Microsoft.VC80.CRT,type="win32",version="8.0.50727.6195".publicKeyToken="x86"'. why??
OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Cannot install itunes, I keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR
Maybe you are looking for
-
How to find serial Number for BCC Plugin?
Hi, How to find serial number for Bcc plugin on FCP? I need format my Mac so before that I to find the serial number? Please anyone can help me....
-
I have a basic JSF app that takes some input, does a request and creates a table on output. What I need to do with it now is to have the query "page" and results "page" in two iframes on the same page. Before the query has been run the second iframe
-
question topic is my question
-
Why won't my NT/P3 system seem my GPIB card?
It doesn't appear to be using a IRQ already assigned, the jumpers are right, and it works in another machine running NT just fine. Any ideas? I'm using the default memory location (0x2c0), and have tried de-selecting DMA. The CPU is a P3 HPVectraVL 5
-
DPM Agent Installation Failed with Error code =0x80070643
Hi, We had an Virtual Machine TFS server 2010 which had SQL server 2008 R2 installed on it. On this Server we were running an DPM 2010 agent and it was fine. Then I had uninstalled DPM 2010 agent and try to Install DPM 2012 R2 Agent on this Virtual