Windows 7 64bit issues
Hey,
I have been running a 32bit XP workstaion for a while now for audio and video production. I decided to jump to win 7 recently and give it a go. My system ran fine with XP as the os. (intel core 2 Duo E8400 3.00 GHZ 2gb ram ati radeon HD2600 XT) I was able to edit HD footage shot from my SONY HDV cam with no problems.
I backed up all my projects and decided to go for it. I added 4 more gigs of ram for a total of 6GB for my win 7 install. (i have updated CS4 and win 7 completely and installed the win 7 64bit drivers for my video card)
I got cs4 installd and premier wont play any of my source videos or sequences. the audio plays but the video just stutters between the same two frames. the source files play fine outside of premier (the source files were crappy videos taken on my girlfriends digital camera, crappy I know, but they worked fine on the same system with xp and less ram. I even tried to open an old more complicated 10min long HD project with lots of edits and multiple audio and video files that worked fine before and i get the same stuttering effect.)
Is there a problem with win7 .. shouldnt it work just the same as vista x64? should i uninstall and reinstall the whole suite? anyone else having the same problems with a similar experiment? win 7 is really nice id would love to get this working.
Thanks in advance
Tim
Uncompressed HD
Uncompressed HD is just what it sounds like. Pure digital HD footage without any compression added. No compression means it's the best possible video quality. This is very important if you do a ton of compositing using multiple layers of video. It is also important if you are collaborating on a project that will require multiple generations of rendering.
We do not recommend using uncompressed video unless it is necessary. You are much better off using one of the easily edited formats described above. If you have to use uncompressed video, we hope you are keeping the clips short as well as the final project. Uncompressed video files are huge, and it requires special hardware to import and export it into your computer. Uncompressed HD footage at the highest resolution requires 558 GB per hour of footage. The throughput is so high you need specialized RAID storage and controllers in order to handle more then a single stream of it.
Source: http://www.videoguys.com/Guide/E/Videoguys+Guide+to+Understanding+HD+Formats/0x9608c8f9fbe d92db9b3fc59187c9ce8d.aspx
Similar Messages
-
I have a brand new HP laptop windows 64bit that is having issues installing Itunes 10.6.3. Whenever attempting to install, I get the error message : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR." I thought this was an issue with the new version, and attempted to retrieve/install older versions of Itunes and same issue occurs. I have tried other forums and resolution tips from : https://discussions.apple.com/docs/DOC-3551 and nothing still. It appears that apple installs bonjour and nothing else. I have tried extracting the itunes package and installing the executables seperately, but everytime the error stil arises. I cannot repair the apple software update as it cannot install from the error mentioned above. Looking through the logs, it shows error : 1721, problem with windows installer package.Does anyone have any suggestions on what to try?
There are so many different error and problems peopl are having.
This is a link to mine
https://discussions.apple.com/thread/3467825
I think it has to be something on Apples end.
Hopefully they fix it soon. Ive used a few GB redownloading and Im going crazy
hope this settles you a bit -
Oracle 11G Express Windows 64bit Version
I've seen the thread that states that a Windows 64bit 11G Express version is planned. Can someone at Oracle please provide an update as to when it will be available? Thanks
Hi ,
There is a known issue with Dbcontrol when try accessing the URL via Internet Explorer
Can you check by accessing the Dbcontrol URL via a different browser like Firefox or Chrome
Ref
Log in to Enterprise Manager Console using Internet Explorer 7 and higher fails with "Internet Explorer cannot display this page" or with Security Certificate Error (Doc ID 1498203.1)
If still an issue then check the status of Dbcontrol to ensure its working fine
SET ORACLE_HOME=<value>
SET ORACLE_SID=ORCL
SET ORACLE_UNQNAME=ORCL
cd %ORACLE_HOME%/bin
emctl stop dbconsole
emctl start dbconsole
emctl status dbconsole
Regards,
Rahul -
Windows 2008 r2 windows installer issue error 1719 when install Backup exec 12.5
Hi all
After a epic weekend of rebuilding our exchange server I have tried to reinstall Backup exec 12.5 64bit, this was installed with no issues during the last build, however at the end of this build I went to reinstall Backup Exec 12.5 and it is failing with
error 1719 Windows installer issue.
I have looked on many sites and tried many things non of them have worked, has anyone managed to resolve this issue.
Dave
DJHHi Lenora
See below
Symantec Backup Exec (TM) 12.5 for Windows Servers Installation Log
03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe
03-19-2013,17:33:38 : CSetupApp::GetInstalledGUID
03-19-2013,17:33:38 : CSetupApp::LoadSetupXML
03-19-2013,17:33:38 : CSetupApp::ScanXML
03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\Setup.xml
03-19-2013,17:33:38 : MSI File Name = WindowsInstaller-KB893803-v2-x86.exe
03-19-2013,17:33:38 : MSI Version = 3.1
03-19-2013,17:33:38 : MSI Package Name = Symantec Backup Exec for Windows Servers.msi
03-19-2013,17:33:38 : System Central Processor = 64
03-19-2013,17:33:38 : Product Type = SETUP_BEX64
03-19-2013,17:33:38 : Product Name = Symantec Backup Exec for Windows Servers
03-19-2013,17:33:38 : Current Installing GUID ={BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:33:38 : Product Version = 12.5
03-19-2013,17:33:38 : CSetupSupport::IsValidMSIPackage
03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Symantec Backup Exec for Windows Servers.msi
03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:33:38 : Equal PID
03-19-2013,17:33:38 : Product version: 12.5.2213
03-19-2013,17:33:38 : StartBESequence
03-19-2013,17:33:38 : Executing BE_PreCheckInstall
03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:33:38 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,17:33:38 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:33:38 : Executing StartBESequence
03-19-2013,17:33:38 : Pulling user data from the MSI
03-19-2013,17:33:38 : Upgrade state set to 0
03-19-2013,17:33:38 : Executing SSO::PullDataMSI()
03-19-2013,17:33:38 : Executing CDlgCAS::PullDataMSI()
03-19-2013,17:33:38 : MSI processing complete
03-19-2013,17:33:38 : Pulling user data from the command line
03-19-2013,17:33:38 : COMMAND LINE: Checking UIMODE value
03-19-2013,17:33:38 : COMMAND LINE: Checking for program group placement value
03-19-2013,17:33:38 : COMMAND LINE: Checking for main feature selection
03-19-2013,17:33:38 : COMMAND LINE: Checking for serialization values
03-19-2013,17:33:38 : CDlgChooseCustom::PullDataSilent
03-19-2013,17:33:38 : After check for parameter file exists.
03-19-2013,17:33:38 : CDlgLocalChooseCustom::Pass
03-19-2013,17:33:38 : After Check for INSTALL_CHOICE.
03-19-2013,17:33:38 : After Check for INSTALL_TYPE.
03-19-2013,17:33:38 : After Check for INSTALL_MODE.
03-19-2013,17:33:38 : CDlgLocalChooseCustom Pass Function end.
03-19-2013,17:33:38 : Agent for Microsoft Exchange Server was added for evaluation
03-19-2013,17:33:38 : Agent for Microsoft SQL Server was added for evaluation
03-19-2013,17:33:38 : Ignoring the TSM switch.
03-19-2013,17:33:38 : COMMAND LINE: Checking for service account values
03-19-2013,17:33:38 : Not in Maintenance mode
03-19-2013,17:33:38 : Getting the Silent Params.
03-19-2013,17:33:38 : COMMAND LINE: checking for SSO values
03-19-2013,17:33:38 : COMMAND LINE: checking for DlgChooseDBServer values
03-19-2013,17:33:38 : COMMAND LINE: Checking for tape drivers values
03-19-2013,17:33:38 : COMMAND LINE: Checking for TSM values
03-19-2013,17:33:38 : COMMAND LINE: checking for CASO values
03-19-2013,17:33:38 : COMMAND LINE: Checking for clone values
03-19-2013,17:33:38 : COMMAND LINE: Checking progress settings
03-19-2013,17:33:38 : COMMAND LINE: Checking for NOINSTALL value
03-19-2013,17:33:38 : Setup Command Line = "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe"
03-19-2013,17:33:38 : List of switches set follows:
03-19-2013,17:33:38 : /DEST: = C:\Program Files\Symantec1\Backup Exec\
03-19-2013,17:33:38 : /SNO: = 0930292112010690
03-19-2013,17:33:38 : /USER: = backup
03-19-2013,17:33:38 : /DOM: = ACCENTPRESS
03-19-2013,17:33:38 : /PASS: = ********
03-19-2013,17:33:38 : /TS:
03-19-2013,17:33:38 : /TD: = ALL
03-19-2013,17:33:38 : /DOCS:
03-19-2013,17:33:38 : /LOADER:
03-19-2013,17:33:38 : /AOFO:
03-19-2013,17:33:38 : /EXCH:
03-19-2013,17:33:38 : /SQL:
03-19-2013,17:33:38 : /NTA:
03-19-2013,17:33:38 : /RAULUS:
03-19-2013,17:33:38 : /DBSERVER:
03-19-2013,17:33:38 : /DBINSTPATH: = C:\Program Files\Microsoft SQL Server\BE\
03-19-2013,17:33:38 : /BACKUPDATA: = 0
03-19-2013,17:33:38 : /MAC:
03-19-2013,17:33:38 : Command line processing complete
03-19-2013,17:33:38 : Install set to run in UI mode
03-19-2013,17:33:38 : CDlgPushWelcome::Pass
03-19-2013,17:33:40 : CinstOpenDlg::ValidateData
03-19-2013,17:33:43 : Validating license data
03-19-2013,17:33:44 : CDlgChooseInstall::ValidateData
03-19-2013,17:33:44 : CDlgValidationSummary::LaunchValidationTest
03-19-2013,17:33:44 : m_bUseNativeClient = 1
03-19-2013,17:33:44 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:33:44 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:33:44 : Connected to SQL Server.
03-19-2013,17:33:44 : m_bUseNativeClient = 1
03-19-2013,17:34:05 : CDlgValidationSummary::ValidateData
03-19-2013,17:34:05 : BEOperations::BE_GetInstalledProdCodeVersion
03-19-2013,17:34:05 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:34:05 : CDlgSerialNumber Pass Function.
03-19-2013,17:34:05 : After Check for Remote_Install.
03-19-2013,17:34:05 : After Check for RA_INSTALL.
03-19-2013,17:34:07 : Validating serialization data
03-19-2013,17:34:07 : CDlgLocalChooseCustom::Pass
03-19-2013,17:34:07 : After Check for INSTALL_CHOICE.
03-19-2013,17:34:07 : After Check for INSTALL_TYPE.
03-19-2013,17:34:07 : After Check for INSTALL_MODE.
03-19-2013,17:34:07 : CDlgLocalChooseCustom Pass Function end.
03-19-2013,17:34:07 : On Init of CDlgChooseCustom
03-19-2013,17:34:07 : Leaving Init of CDlgChooseCustom
03-19-2013,17:34:07 : CDlgLocalChooseCustom::OnInitDialog
03-19-2013,17:34:07 : On Init of CDlgLocalChooseCustom
03-19-2013,17:34:07 : Leaving Init of CDlgLocalChooseCustom
03-19-2013,17:34:12 : Validating Local Options Data
03-19-2013,17:34:13 : Validating service account data
03-19-2013,17:34:13 : CDlgSSO Pass Function.
03-19-2013,17:34:13 : After Check for INSTALL_MODE.
03-19-2013,17:34:13 : DlgChooseDBServer Pass Function.
03-19-2013,17:34:20 : m_bUseNativeClient = 1
03-19-2013,17:34:20 : Validating DlgChooseDBServer data
03-19-2013,17:34:20 : Drive C: Required: 1102 MB Available: 37138 MB
03-19-2013,17:34:20 : CDlgChooseTapeDrivers Pass Function.
03-19-2013,17:34:20 : After Check for INSTALL_MODE.
03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
03-19-2013,17:34:20 : After Check for INSTALL_TYPE.
03-19-2013,17:34:20 : CDlgSerialNumber Pass Function.
03-19-2013,17:34:20 : CDlgCAS Pass Function.
03-19-2013,17:34:20 : After Check for INSTALL_MODE.
03-19-2013,17:34:20 : CDlgClone Pass Function.
03-19-2013,17:34:20 : CDlgClone not passed.
03-19-2013,17:34:20 : CDlgRemoteChooseCustom Pass Function.
03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
03-19-2013,17:34:20 : Install Summary XML File:
03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.xml
03-19-2013,17:34:20 : Install Summary XSL File:
03-19-2013,17:34:20 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\InstallSummary.xsl
03-19-2013,17:34:20 : Install Summary HTML File:
03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.htm
03-19-2013,17:34:20 : Not Quickstart Edition
03-19-2013,17:34:20 : Entering GetSQLAndCASOInformation
03-19-2013,17:34:20 : Leaving GetSQLAndCASOInformation
03-19-2013,17:34:20 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:34:20 : m_bUseNativeClient = 1
03-19-2013,17:34:20 : *************** About Backing Up Exchange 2007 Servers *************** To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this
computer. The Management Tools can be installed during a custom install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft
Exchange Server MAPI Client and Collaboration Data Objects package version 06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,17:34:21 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:34:27 : Executing InstallLiveUpdate.
03-19-2013,17:34:40 : Installing .Net Framework 2.0 SP1.
03-19-2013,17:34:40 : Checking for .Net Framework 2.0 SP1.
03-19-2013,17:34:40 : Vista or Longhorn server. Not installing .NET Frameworks.
03-19-2013,17:34:40 : .NET Framework was detected. Skipping install.
03-19-2013,17:34:41 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,17:34:41 : m_bUseNativeClient = 1
03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes;DATABASE=master
03-19-2013,17:34:41 : SQL Server version 9
03-19-2013,17:34:41 : SQL version returned: 9
03-19-2013,17:34:41 : Executing SQL_GetServicePack.
03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:34:41 : Connected to SQL Server.
03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:34:41 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:34:41 : Connected to SQL Server.
03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Express Edition
03-19-2013,17:34:41 : "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\SQLExpress\SQLEXPR.exe" /wait /qn /norestart /lv "C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt" INSTANCENAME=BKUPEXEC SQLACCOUNT="NT AUTHORITY\SYSTEM" SQLPASSWORD=""
UPGRADE=SQL_Engine,SQL_Data_Files,SQL_Replication,Client_Components,Connectivity SAPWD=**** DISABLENETWORKPROTOCOLS=0
03-19-2013,17:34:45 : V-225-53: ERROR: Failed to install SQL Express BKUPEXEC instance with error 1601. ***To search for information about this error, click
here
03-19-2013,17:34:45 : Please review C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt for more details.
03-19-2013,17:34:45 : Failed to install third party products.
03-19-2013,17:37:25 : Validating install complete
03-19-2013,17:37:25 : Success unloading BEINSTDLGS.DLL.
03-19-2013,17:37:25 : CLEANUP: Install has removed the following files from: C:\Users\ADMINI~1\AppData\Local\Temp\1\{BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
03-19-2013,17:37:25 : Removed files:
03-19-2013,17:37:25 : ERROR: Installation failed with error 1603.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,17:41:16 : Windows Operating System Version: 6.1
03-19-2013,17:41:16 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,17:41:18 : Executing managed _Setup:
03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,17:41:18 : Loading XML from:
03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,17:41:18 : RawsDlgSequence::CheckInstMode
03-19-2013,17:41:18 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,17:41:19 : Launching UI Install
03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:41:19 : m_bUseNativeClient = 1
03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:41:20 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,17:41:20 : CopySupportFiles
03-19-2013,17:41:20 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,17:41:20 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:41:20 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,17:41:20 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,17:41:28 : Typical install value is set to : True
03-19-2013,17:41:29 : m_bUseNativeClient = 1
03-19-2013,17:41:29 : Executing SQL_GetServicePack.
03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:41:29 : Connected to SQL Server.
03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:41:29 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:41:29 : Connected to SQL Server.
03-19-2013,17:41:29 : Executing SQL_GetServicePack.
03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:41:29 : Connected to SQL Server.
03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:41:29 : m_bUseNativeClient = 1
03-19-2013,17:41:51 : m_bUseNativeClient = 1
03-19-2013,17:41:51 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:43:04 : Currently executing as ACCENTPRESS\administrator
03-19-2013,17:43:04 : Install is not executing as the service account.
03-19-2013,17:43:04 : Successfully Logged on as service account.
03-19-2013,17:43:04 : Successfully impersonated service account.
03-19-2013,17:43:04 : EUserName value successfully written to the registry.
03-19-2013,17:43:04 : EPassword value successfully written to the registry.
03-19-2013,17:43:04 : EDomain value successfully written to the registry.
03-19-2013,17:43:09 : There were no remote computers selected for install
03-19-2013,17:43:09 : m_bUseNativeClient = 1
03-19-2013,17:43:09 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,17:43:10 : Terminal Services enabled.
03-19-2013,17:43:10 : Terminal Services server has been set to Install mode.
03-19-2013,17:43:11 : Checking for .Net Framework 3.5 SP1.
03-19-2013,17:43:11 : Executing InstallLiveUpdate.
03-19-2013,17:44:35 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,17:44:35 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,17:44:35 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,17:44:35 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,17:44:35 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:44:35 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,17:44:35 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:44:35 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,17:44:35 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:44:36 : Starting Install
03-19-2013,17:44:36 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,17:44:36 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:44:36 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,17:44:36 : Discovered Total Actions: 115
03-19-2013,17:44:36 : The return code from the MSI is: 1601
03-19-2013,17:44:36 : Cleaning up the symc status key
03-19-2013,17:44:36 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,17:44:36 : Clean up Symantec installer keys.
03-19-2013,17:44:37 : Terminal Services enabled.
03-19-2013,17:44:37 : Terminal Services server has been set to Execute mode.
03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,17:44:57 : BeSeqDlgs::DlgInstallComplete
03-19-2013,17:44:57 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,17:45:25 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:45:28 : Gathering Telemetry items
03-19-2013,17:45:28 : Failed to start the management service
03-19-2013,17:45:28 : Service BackupExecManagementService was not found on computer '.'.
03-19-2013,17:45:28 : Sending Telemetry to Symantec
03-19-2013,17:45:28 : Transmit Telemetry initialized.
03-19-2013,17:45:28 : TelemetryRegistryHelpers initialized.
03-19-2013,17:45:29 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
03-19-2013,17:56:31 : Windows Operating System Version: 6.1
03-19-2013,17:56:31 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,17:56:33 : Executing managed _Setup:
03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,17:56:33 : Loading XML from:
03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,17:56:33 : RawsDlgSequence::CheckInstMode
03-19-2013,17:56:33 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,17:56:34 : Launching UI Install
03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:56:35 : m_bUseNativeClient = 1
03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,17:56:35 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,17:56:35 : CopySupportFiles
03-19-2013,17:56:35 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,17:56:35 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:56:35 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,17:56:35 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,17:56:49 : Typical install value is set to : True
03-19-2013,17:56:50 : Executing SQL_GetServicePack.
03-19-2013,17:56:50 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:56:51 : Connected to SQL Server.
03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:56:51 : Executing SQL_GetSQLServerEdition.
03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:56:51 : Connected to SQL Server.
03-19-2013,17:56:51 : Executing SQL_GetServicePack.
03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,17:56:51 : Connected to SQL Server.
03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,17:57:37 : m_bUseNativeClient = 1
03-19-2013,17:57:37 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,17:58:41 : Currently executing as ACCENTPRESS\administrator
03-19-2013,17:58:41 : Install is not executing as the service account.
03-19-2013,17:58:41 : Successfully Logged on as service account.
03-19-2013,17:58:41 : Successfully impersonated service account.
03-19-2013,17:58:41 : EUserName value successfully written to the registry.
03-19-2013,17:58:41 : EPassword value successfully written to the registry.
03-19-2013,17:58:41 : EDomain value successfully written to the registry.
03-19-2013,17:58:51 : There were no remote computers selected for install
03-19-2013,17:58:51 : m_bUseNativeClient = 1
03-19-2013,17:58:51 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,17:58:52 : Terminal Services enabled.
03-19-2013,17:58:52 : Terminal Services server has been set to Install mode.
03-19-2013,17:58:52 : Checking for .Net Framework 3.5 SP1.
03-19-2013,17:58:54 : Executing InstallLiveUpdate.
03-19-2013,17:59:06 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,17:59:06 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,17:59:07 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,17:59:07 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:59:07 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,17:59:07 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:59:07 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,17:59:07 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,17:59:07 : Starting Install
03-19-2013,17:59:07 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,17:59:07 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,17:59:08 : Discovered Total Actions: 115
03-19-2013,17:59:08 : The return code from the MSI is: 1601
03-19-2013,17:59:08 : Cleaning up the symc status key
03-19-2013,17:59:08 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,17:59:08 : Clean up Symantec installer keys.
03-19-2013,17:59:10 : Terminal Services enabled.
03-19-2013,17:59:10 : Terminal Services server has been set to Execute mode.
03-19-2013,18:00:01 : The return code is: 0
03-19-2013,18:00:01 : SUCCESS: Installation has completed successfully.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:02:24 : Windows Operating System Version: 6.1
03-19-2013,18:02:24 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:02:26 : Executing managed _Setup:
03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:02:26 : Loading XML from:
03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:02:26 : RawsDlgSequence::CheckInstMode
03-19-2013,18:02:26 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:02:26 : Launching UI Install
03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:02:26 : m_bUseNativeClient = 1
03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:02:26 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:02:26 : CopySupportFiles
03-19-2013,18:02:26 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:02:27 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:02:27 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:02:27 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:03:11 : The return code is: 0
03-19-2013,18:03:11 : SUCCESS: Installation has completed successfully.
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:03:21 : Windows Operating System Version: 6.1
03-19-2013,18:03:21 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:03:22 : Windows Operating System Version: 6.1
03-19-2013,18:03:22 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:03:23 : Executing managed _Setup:
03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:03:23 : Loading XML from:
03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:03:23 : RawsDlgSequence::CheckInstMode
03-19-2013,18:03:23 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:03:24 : Launching UI Install
03-19-2013,18:03:24 : Executing managed _Setup:
03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:03:24 : m_bUseNativeClient = 1
03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:03:24 : Loading XML from:
03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:03:24 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:03:24 : RawsDlgSequence::CheckInstMode
03-19-2013,18:03:24 : CopySupportFiles
03-19-2013,18:03:24 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:03:24 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:03:24 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:03:24 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:03:24 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:03:58 : Typical install value is set to : True
03-19-2013,18:03:58 : m_bUseNativeClient = 1
03-19-2013,18:03:58 : Executing SQL_GetServicePack.
03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:03:58 : Connected to SQL Server.
03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:03:58 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:03:58 : Connected to SQL Server.
03-19-2013,18:03:58 : Executing SQL_GetServicePack.
03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:03:58 : Connected to SQL Server.
03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:03:58 : m_bUseNativeClient = 1
03-19-2013,18:04:20 : m_bUseNativeClient = 1
03-19-2013,18:04:20 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:05:35 : Currently executing as ACCENTPRESS\administrator
03-19-2013,18:05:35 : Install is not executing as the service account.
03-19-2013,18:05:35 : Successfully Logged on as service account.
03-19-2013,18:05:35 : Successfully impersonated service account.
03-19-2013,18:05:35 : EUserName value successfully written to the registry.
03-19-2013,18:05:35 : EPassword value successfully written to the registry.
03-19-2013,18:05:35 : EDomain value successfully written to the registry.
03-19-2013,18:05:36 : There were no remote computers selected for install
03-19-2013,18:05:36 : m_bUseNativeClient = 1
03-19-2013,18:05:36 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,18:05:37 : Terminal Services enabled.
03-19-2013,18:05:37 : Terminal Services server has been set to Install mode.
03-19-2013,18:05:37 : Checking for .Net Framework 3.5 SP1.
03-19-2013,18:05:38 : Executing InstallLiveUpdate.
03-19-2013,18:05:50 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,18:05:50 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,18:05:50 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,18:05:50 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:05:50 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,18:05:50 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:05:50 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,18:05:50 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:05:50 : Starting Install
03-19-2013,18:05:50 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:05:50 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,18:05:50 : Discovered Total Actions: 115
03-19-2013,18:05:50 : The return code from the MSI is: 1601
03-19-2013,18:05:51 : Cleaning up the symc status key
03-19-2013,18:05:51 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,18:05:51 : Clean up Symantec installer keys.
03-19-2013,18:05:51 : Terminal Services enabled.
03-19-2013,18:05:51 : Terminal Services server has been set to Execute mode.
03-19-2013,18:06:32 : The return code is: 0
03-19-2013,18:06:32 : SUCCESS: Installation has completed successfully.
03-19-2013,18:07:36 : Setup is already running. Unable to initialize another instance of setup.
03-19-2013,18:07:39 : Error initializing shared data
03-19-2013,18:07:39 : ERROR: Installation failed with error 1603. GetLastError = :0
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:13:44 : Windows Operating System Version: 6.1
03-19-2013,18:13:44 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:13:44 : Windows Operating System Version: 6.1
03-19-2013,18:13:44 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:13:46 : Executing managed _Setup:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:13:46 : Executing managed _Setup:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:13:46 : Loading XML from:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:13:46 : Loading XML from:
03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:13:47 : Launching UI Install
03-19-2013,18:13:47 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:13:48 : m_bUseNativeClient = 1
03-19-2013,18:13:48 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:13:48 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:13:48 : CopySupportFiles
03-19-2013,18:13:48 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:13:48 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:13:48 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:13:48 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:13:54 : Typical install value is set to : True
03-19-2013,18:13:55 : m_bUseNativeClient = 1
03-19-2013,18:13:55 : Executing SQL_GetServicePack.
03-19-2013,18:13:55 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:13:56 : Connected to SQL Server.
03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:13:56 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:13:56 : Connected to SQL Server.
03-19-2013,18:13:56 : Executing SQL_GetServicePack.
03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:13:56 : Connected to SQL Server.
03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:13:56 : m_bUseNativeClient = 1
03-19-2013,18:14:41 : m_bUseNativeClient = 1
03-19-2013,18:14:41 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:16:09 : Service account specified is not valid
03-19-2013,18:16:09 : Unable to authenticate with the user and password information given for ACCENTPRESS\backup.
03-19-2013,18:16:10 : Error validating service account credentials.
03-19-2013,18:16:20 : Currently executing as ACCENTPRESS\administrator
03-19-2013,18:16:20 : Install is not executing as the service account.
03-19-2013,18:16:20 : Successfully Logged on as service account.
03-19-2013,18:16:20 : Successfully impersonated service account.
03-19-2013,18:16:20 : EUserName value successfully written to the registry.
03-19-2013,18:16:20 : EPassword value successfully written to the registry.
03-19-2013,18:16:20 : EDomain value successfully written to the registry.
03-19-2013,18:16:22 : There were no remote computers selected for install
03-19-2013,18:16:22 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,18:16:23 : Terminal Services enabled.
03-19-2013,18:16:23 : Terminal Services server has been set to Install mode.
03-19-2013,18:16:23 : Checking for .Net Framework 3.5 SP1.
03-19-2013,18:16:25 : Executing InstallLiveUpdate.
03-19-2013,18:16:37 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,18:16:37 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,18:16:38 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,18:16:38 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:16:38 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,18:16:38 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:16:38 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,18:16:38 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,18:16:38 : Starting Install
03-19-2013,18:16:38 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,18:16:38 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,18:16:39 : Discovered Total Actions: 115
03-19-2013,18:16:39 : The return code from the MSI is: 1601
03-19-2013,18:16:39 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,18:16:39 : Clean up Symantec installer keys.
03-19-2013,18:16:39 : Cleaning up the symc status key
03-19-2013,18:16:41 : Terminal Services enabled.
03-19-2013,18:16:41 : Terminal Services server has been set to Execute mode.
03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,18:17:08 : BeSeqDlgs::DlgInstallComplete
03-19-2013,18:17:08 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,18:17:09 : Gathering Telemetry items
03-19-2013,18:17:09 : Failed to start the management service
03-19-2013,18:17:09 : Service BackupExecManagementService was not found on computer '.'.
03-19-2013,18:17:09 : Sending Telemetry to Symantec
03-19-2013,18:17:09 : Transmit Telemetry initialized.
03-19-2013,18:17:09 : TelemetryRegistryHelpers initialized.
03-19-2013,18:17:21 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
03-19-2013,18:17:33 : TransmitTelemetry.TransmitMessage URL=http://statsbe.norton.com/n/p, Caught WebException The remote name could not be resolved: 'statsbe.norton.com'
03-19-2013,18:17:33 : Telemetry transmission failed. Data was not sent.
03-19-2013,18:17:33 : The return code is: 1601
03-19-2013,18:17:33 : ERROR: Installation failed with error 1601. GetLastError = :0
03-19-2013,18:17:48 : Setup is already running. Unable to initialize another instance of setup.
03-19-2013,18:17:51 : Error initializing shared data
03-19-2013,18:53:53 : m_bUseNativeClient = 1
03-19-2013,18:53:53 : Executing SQL_GetServicePack.
03-19-2013,18:53:53 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:53:54 : Connected to SQL Server.
03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:53:54 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:53:54 : Connected to SQL Server.
03-19-2013,18:53:54 : Executing SQL_GetServicePack.
03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:53:54 : Connected to SQL Server.
03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:53:54 : m_bUseNativeClient = 1
Symantec Backup Exec (TM) 13 Installation Log
03-19-2013,18:58:06 : Windows Operating System Version: 6.1
03-19-2013,18:58:06 : GetProductInfo returned success. Checking for CORE OS values.
03-19-2013,18:58:08 : Executing managed _Setup:
03-19-2013,18:58:08 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
03-19-2013,18:58:09 : Loading XML from:
03-19-2013,18:58:09 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
03-19-2013,18:58:09 : RawsDlgSequence::CheckInstMode
03-19-2013,18:58:09 : BEOperations::BE_GetInstalledProdCodeVersion()
03-19-2013,18:58:09 : Launching UI Install
03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:58:10 : m_bUseNativeClient = 1
03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
03-19-2013,18:58:10 : BeSeqDlgs::DlgBERemoteConfig
03-19-2013,18:58:10 : CopySupportFiles
03-19-2013,18:58:10 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
03-19-2013,18:58:11 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:58:11 : Executing BE_SetSQLxLangVersion. Setting language version of SQL Express BKUPEXEC instance.
03-19-2013,18:58:11 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
03-19-2013,18:58:15 : Typical install value is set to : True
03-19-2013,18:58:16 : m_bUseNativeClient = 1
03-19-2013,18:58:16 : Executing SQL_GetServicePack.
03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:58:16 : Connected to SQL Server.
03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:58:16 : Executing SQL_GetSQLServerEdition.
03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:58:16 : Connected to SQL Server.
03-19-2013,18:58:16 : Executing SQL_GetServicePack.
03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
03-19-2013,18:58:16 : Connected to SQL Server.
03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
03-19-2013,18:58:16 : m_bUseNativeClient = 1
03-19-2013,18:58:49 : m_bUseNativeClient = 1
03-19-2013,18:58:49 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,18:59:43 : Currently executing as ACCENTPRESS\administrator
03-19-2013,18:59:43 : Install is not executing as the service account.
03-19-2013,18:59:43 : Successfully Logged on as service account.
03-19-2013,18:59:44 : Successfully impersonated service account.
03-19-2013,18:59:44 : EUserName value successfully written to the registry.
03-19-2013,18:59:44 : EPassword value successfully written to the registry.
03-19-2013,18:59:44 : EDomain value successfully written to the registry.
03-19-2013,18:59:46 : There were no remote computers selected for install
03-19-2013,18:59:46 : m_bUseNativeClient = 1
03-19-2013,18:59:46 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer. The Management Tools can be installed during a custom
install of Microsoft Exchange Server 2007. To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
06.05.7888 or later on the Exchange 2007 server. This package can be found on the Microsoft Web site.
03-19-2013,18:59:47 : Terminal Services enabled.
03-19-2013,18:59:47 : Terminal Services server has been set to Install mode.
03-19-2013,18:59:47 : Checking for .Net Framework 3.5 SP1.
03-19-2013,18:59:49 : Executing InstallLiveUpdate.
03-19-2013,19:00:01 : The return value for Symantec LiveUpdate returned error code: 0
03-19-2013,19:00:01 : Installing Microsoft Report Viewer Redistributable 2005
03-19-2013,19:00:01 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
03-19-2013,19:00:01 : ==================Installing MS VC 8.0 SP1 runtimes.==================
03-19-2013,19:00:01 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,19:00:01 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
03-19-2013,19:00:01 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,19:00:02 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
03-19-2013,19:00:02 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
03-19-2013,19:00:02 : Starting Install
03-19-2013,19:00:02 : Using Command Line: REBOOT=ReallySuppress
03-19-2013,19:00:02 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
03-19-2013,19:00:02 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
03-19-2013,19:00:03 : Discovered Total Actions: 115
03-19-2013,19:00:03 : The return code from the MSI is: 1601
03-19-2013,19:00:03 : Cleaning up the symc status key
03-19-2013,19:00:03 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
03-19-2013,19:00:03 : Clean up Symantec installer keys.
03-19-2013,19:00:05 : Terminal Services enabled.
03-19-2013,19:00:05 : Terminal Services server has been set to Execute mode.
03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,19:00:07 : BeSeqDlgs::DlgInstallComplete
03-19-2013,19:00:07 : AgentSeqDlgs::Misc_BE_CommonOps
03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
03-19-2013,19:00:10 : Gathering Telemetry items
03-19-2013,19:00:10 : Failed to start the management service
03-19-2013,19:00:10 : Service BackupExecManagementService was not found on computer '.'.
03-19-2013,19:00:10 : Sending Telemetry to Symantec
03-19-2013,19:00:10 : Transmit Telemetry initialized.
03-19-2013,19:00:10 : TelemetryRegistryHelpers initialized.
03-19-2013,19:00:10 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
03-19-2013,19:00:10 : Telemetry data was successfully sent to Symantec
03-19-2013,19:00:10 : The return code is: 1601
03-19-2013,19:00:11 : ERROR: Installation failed with error 1601. GetLastError = :0
DJH -
Jabber for Windows Registration Issue
I have been facing issue with J4W registration and display error "no connection to server". Following is the version detail:-
Version CUCM and IM&P---> (10.5.2)
On-Premises login
During analysis, i found 2 things in logs:-
1). Unable to download jabber-config.xml file (Download of TFTP File failed for server ) //// all the other xml files are succesfully downloaded which may indicate that there is an absence of jabber-config.xml file.
2). While signing into presence "OnLoginError: (data=0) LERR_JABBER_UNREACHABLE <16>: "
[rc\cert\common\BaseCertVerifier.cpp(250)] [csf.cert.] [cert::BaseCertVerifier::checkIdentity] - About to verify the Subject Alt Name.
[ls\src\cert\common\CertVerifier.cpp(154)] [csf.cert] [cert::CertVerifier::checkIdentifier] - Verifying identity '162.20.10.30'
[rc\cert\utils\AltNameParserImpl.cpp(349)] [csf.cert.utils] [cert::AltNameParserImpl::verify] - Looking for match with 162.20.10.30
[rc\cert\utils\AltNameParserImpl.cpp(400)] [csf.cert.utils] [cert::AltNameParserImpl::verify] - No Match Found
I tried to change the IP address to FQDN under System---> Server, but after that the connection is lost between CUCM and IM&P.
Attached is the log file and snapshot of IM&P.
- See more at: https://supportforums.cisco.com/discussion/12490406/jabber-windows-registration-issue#sthash.E2wXb4iJ.dpufNishant,
Sorry for the late reply. You may well have resolved this by now, if you have can I suggest that you update the post with the resolution so others may benefit.
Looking at the logs, I can see that Jabber is trying to login to the IMP server below, but its returning server unreachable error.
Signing into Presence Server. Server: 162.20.10.30, login mode: ON_PREM, result: 0
[IMPStackCap::Login::OnLoginError] - ****************************************************************
[IMPStackCap::Login::OnLoginError] - OnLoginError: (data=0) LERR_JABBER_UNREACHABLE <16>:
[IMPStackCap::Login::OnLoginError] - ****************************************************************
We will need to look at the IMP logs to know what is going on. Let me know if you still need help with this. -
I can't eject ("files in use by another application") Windows/Vista Issue?
OK... so in the grand scheme of things, this really is NOT the end of the world... but it sure is super-annoying!! This is my first every Apple product (took a while to get on the bandwagon) and I was hoping for more stability and ease of use... I've called AppleCare several times and they can't help me figure this out... according to them it's a Windows/Vista issue (which DOES seem likely). I'm running Windows Vista Home Premium on a Dell Dimension E521.
Here's how it goes... I plug my iPod in, which opens up iTunes and it syncs fine. I wait until the top of iTunes says "sync complete" and the face of the iPod simply says "Connected". Then I click on the "eject" button next to the iPod listing in iTunes. It pauses for a moment, then I look down and the iPod suddenly has those syncing, circular arrows, moving again and it says "Synchronizing- do not disconnect". And then a few moments later, iTunes gives me a pop-up that says " XXXX ipod cannot be ejected because it contains files that are in use by another application"
So obviously, something else is connecting to the iPod and preventing me from ejecting it using iTunes, but I have not been able to figure out what it is!
Since it's something on my machine, I have tried the following:
- shut down AntiVirus (TrendMicro Internet Security 2008)
- turned off Windows Firewall
- went through all the programs running in the task bar and turned them off
- opened up Task Manager and turned EVERYTHING else I could see off
None of the above have made any difference. The workaround that Apple gave me was to go into Computer and then right click on the listed drive and select "Safely Remove" which usually works (the times it doesn't work, it gives a similar message saying the device was being used by another application and can't be removed, try again later). But 90% of the time it works.
I use that or the Eject option when I right click on that drive (not sure the difference, they seem to do the same thing). The workaround works, but I'd sure LOVE to get iTunes to be able to eject my iPod!!
Here's what I've done regarding this iPod and iTunes:
- reset the iPod
- restored the iPod
- uninstalled and re-installed iTunes
- selected and unselected the various things I'm syncing (currently: Music, TV Shows, Podcasts, Photos) to see if it was one of them causing the issue
NONE of the above has made any difference (and I've done each about 2-3 times, ZERO exaggeration).
I've called into AppleCare about half a dozen times now, hoping to get that one brilliant tech that knows more than the others... but no luck yet... so I thought I'd try this forum to see if one of the brilliant posters here can help me sort this out.
PLEASE- ANY help you can provide (or even just point me in the "right" direction of how to determine this) would be GREATLY appreciated!!
Thanks so much in advance,
SCI am using windows Vista and having this problem also (not exactly, but iTunes gives pop-up that "files are in use"). Acting a suggestion from another answer in this thread, I clicked on Computer and selected eject...windows did warn me that the device was in use, but also gave me a CONTINUE button, which I clicked and it was ejected...had to go back to iTunes and eject the iPod there also, but it did eject
-
We have a 10 person office - all either use Acrobat XI or Reader XI. One person is on Windows 7. The rest are on Windows 8 (not 8.1). I say this because I thought it was a Windows 8 issue, but having the same problems on the Windows 7 machine. We are all having problems opening pdf's sent to us from other firms. This has increased in frequency over the past two months. We've checked with the various firms, and their other clients are not having problems. Some pdfs open but with a lot of missing content and strange formatting, others won't open at all. There are different error messaged depending upon the doc. Some are regarding the fonts, for example "can't extract the embedded font...." Others are "insufficient data" errors. There are more, but for purposes of keeping this short, I won't include them. Another unrelated issue is that we are having trouble printing excel files to pdf. The files end up with bad formatting. I've worked with adobe "chat" support, our IT consultants with no resolution. I also haven't found any similar "known issue" online Would very much appreciate any assistance. Thank you
The font embedding can be a problem if not done and you are trying to view the PDF and do not have the font on your machine. Acrobat will often try to find a replacement, but it is not always a good choice. Sometimes the "Use Local Fonts" button can be changed in state to resolve some of the viewing issues.
If you are trying to copy or export info, then it is important that you have the fonts on your system. Otherwise, the message you are getting about embedded fonts would not be showing up.
As for Excel formatting, be sure that the Adobe PDF printer is selected in the printer screen before you look for the paging and formatting of the file. In most OFFICE programs, if you change the printer the application will reflow the document to best match the printer (called "using printer metrics"). So check before you create the PDF that the layout is correct. -
I updated my computer to Itune 11, did not like it, and uninstalled it exactly according to directions. I re-installed Itune10.7.021 for Windows 64bit, but now I keep getting the message "The file itunes library.itl cannot be read because it was created by a newer version of itunes. How can I resolve this problem?
zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
So, I have purchased 'Windows 8 Pro' and am working to get it stable on my W520.
Specs:
- Lenovo W520 4270-CTO
- i7 2720qm
- Quadro 2000m
- 16gb G-Skill DDR3
- 120gb Intel 320 SSD
Usage:
- Systems Engineer using various development suites, virtualization technologies (directed i/o is a must), and other processor/ram intensive activities. I am looking to use Hyper-V and do some fairly heavy infrastructure simulations.
- Occasional games (usually DOTA, Skyrim, etc.) which run at high FPS with gfx settings near maxed (Starcraft 2 is an exception, which doesn't work at all... Stupid Blizzard...)
Windows 8 Issues:
- Cannot boot off install media with VT-d Virtualization Technology enabled. If I re-enable it post-install, sometimes it crashes, sometimes it doesn't.
- Blue screens on sleep resume
- Crashes on various driver installs (random, sometimes they work, sometimes they don't), locks up on boot, then after physical restart, crashes on Automatic Repair before being able to start back up normally.
- After installing Hyper-V, system crashes, crashes on automatic repair, then is AOK...until it randomly crashes
What I've Tried:
- Switching between Integrated/Discrete/Optimus graphics doesn't seem to have made any difference.
- Disabling VT-d seems to have helped with issues booting, but alas, no big fixes
- Updated BIOS to 1.38, and 1.39 - both made no difference, still at 1.39.
- Event log reports kernal power loss and various bugcheck errors but unable to find anything referencing the code provided, nor is there any surefire reported dll or driver which seems to be sticking out.
- I have attempted 3-4 installs from scratch without resolve.
Other then these issues, if its booted and doesn't crash, the o/s is quite peppy (faster then w7 by a fair degree) and the UltraNav touchpad works quite well with navigating Metro and various Charms.
Have a Mini Series 3 dock which works well (although it has its issues i'll post up elsewhere) and switches between docked and normal usage with ease.
I have since reverted back to Windows 7 until I can find something promising to work with as the lack of support resources is understandably limited at this point.
I cannot develop for Windows 8 or Windows Phone 8 without upgrading or buying a new system. I've been quite happy with my W520 but this is just frustrating and would rather not move to another mftr if I don't have to.
My question:
>>> Has anyone successfully installed and run Windows 8 Pro without issue?
>>> If so, can you please provide me with what releases/versions of the drivers you are running and what BIOS version you are running.
Any suggestions or sources would be immensely helpful in my quest to get W8 somewhat usable on this beast.
Thanks in advance!hazart wrote:
BSOD on resume:
Happened to a W530 with Crucial m4 mSATA SSD. It turned out that it would happen if the drive is password-protected. After removing the password in BIOS Setup, there's no more BSOD on resume.
So, thusfar, no BSODs on resume. I still have to install the rest of the drivers but at this point, no BSOD since fresh install early this morning. I only have the single Intel 320 SSD in my SATA bay, no mSata drive as of yet. Additionally, I do not have a HDD password. I use the BIOS password w/ fingerprint authentication though.
Post-install, Windows had installed whatever drivers it felt were necessary. After that finished, I had installed Lenovo System Update and went through its update procedure. I elected to install all but:
- ThinkVantage Active Protection (I have SSD, not necessary)
- Audio Driver for Windows 832/864 (Sound works, reports as High Definition Audio Device - I am investigating option for Dolby driver as I had setup in Windows 7 as per W520 Sound Enhancement thread)
- Ricoh Media Card Reader Device (only used a handful of times in the past, will find some cards to test)
Outstanding issues:
- Device Manager reports two non-install devices (Base System Device and Unknown Device).
- Base System Device hardware ID is: NTPNP_PC <-- I don't know what this is, any ideas?
- Unknown Device hardware ID is: ACPI/LEN <-- I assume intel chipset since I had already installed Power Management driver via System Update?
- Update other Windows standard drivers to Lenovo Windows 8 releases
- Update NVidia Drivers to latest release/verde (maybe depending on video performance)
- Setup Fingerprint software in Windows 8 to match that of the BIOS as right now, no fingerprint auth in Win8
- Install Development software, Hyper-v once I have everything else settled
- Anything else I'm forgetting?
Without jumping the gun, it seems as installing using UEFI fixed a few critical reliability problems (VT-d, boot, etc.). Try that if you're having severe stability issues. -
Unable to Resolve Windows Update Issue in Windows 8.1
Hello,
I recently, as far back as 1 month ago, began experiencing issues with the update service under the Windows 8.1 OS platform.
I found that I was having to repeatedly run the Windows Update Troubleshooting Tool. This appeared to fix the issue with each run of the tool, but eventually I'd have the same problem receiving updates again. My problem is as follows:
1. Windows Update service hangs during register analysis.
2. Unable to reset (stop or restart) wuauserv.
3. Unable to reset (stop or restart) Cryptserv.
4. Unable to reset (stop or restart) BITS.
5. Unit recently, was unable to connect to internet from Desktop GUI, but was able to connect using Metro GUI.
I'm not sure is there was a recent update that caused this issue, but I can no longer download updates for my system, nor can I successfully run the Windows Update Fixit tool.Hi,
Let's confirm these situations:
Now your desktop Internet Explorer can't connect Internet.
You receiving the same updates again and again.
If I am right, please check that update's installation status from update history.
Then refer to this article to troubleshoot:
http://social.technet.microsoft.com/Forums/en-US/c842b997-42a4-41fb-9992-b58d65d068d9/forum-faq-common-steps-to-start-troubleshooting-windows-update-issues?forum=w8itprogeneral
Karen Hu
TechNet Community Support -
on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?
No. You have no alternative but to plug it into a computer running iTunes and restore it.
-
Windows Firewall issue, Inbound rule opend all, still not the same as turning off
This is Windows Firewall issue on Windows 8.1 Pro.
Backup Exec server cannot expand a computer node in selection list. I drill down to Microsoft Windows Network/Domain/Computers, then when I tried to expand a Windows 8.1 Pro computer node, it hangs out.
I narrowed this problem to Windows firewall related issue on Windows 8.1 Pro computer.
When I turn off Windows Firewall on Domain profile, Backup Exec Selection expands the computer node of the Windows 8.1 Pro computer. So, I created an inbound rule opening all to BAckup Exec server as following, but it's still not the same as turning off
Windows firewall specifically on Windows 8.1 Pro computer;
Any Local IP address, Any Remote IP address, Any port, Any protocol, All Interface, All Programs and Services, All profiles(Domain, Private, Public)
And there are no rules blocking any which may override the above rule.
Ethernet on Windows 8.1 Pro computer shows profile is linked with Domain, but just to make it work, I selected all profiles.
Even though I opened all available in inbound rule, it's still not the same as turning off windows firewall. Why am I missing?It looks as something related to RPC(UDP 135), but even when inbound rule is all open, why it matters? RPC seems working fine only when firewall is turned off on domain profile.
Protocol 17 is UDP
Port: 135
===============================
Event ID 5152
The Windows Filtering Platform has blocked a packet.
Application Information:
Process ID:
0
Application Name:
Network Information:
Direction:
Outbound
Source Address:
192.168.1.120
Source Port:
0
Destination Address:
192.168.1.11
Destination Port:
0
Protocol:
1
Filter Information:
Filter Run-Time ID:
245836
Layer Name:
ICMP Error
Layer Run-Time ID:
32
The Windows Filtering Platform has blocked a packet.
Application Information:
Process ID:
0
Application Name:
Network Information:
Direction:
Inbound
Source Address:
192.168.1.11
Source Port:
35341
Destination Address:
192.168.1.120
Destination Port:
135
Protocol:
17
Filter Information:
Filter Run-Time ID:
245834
Layer Name:
Transport
Layer Run-Time ID:
13 -
Install oracle 10g (32bits) on windows (64bits)
hi,
Have anyone tried installing oracle10g 32bits on windows 64bits platform before? Will it cause any problems and what are the drawbacks?
Thankshi,
Have anyone tried installing oracle10g 32bits on windows 64bits platform before? Will it cause any problems and what are the drawbacks?
Thanks -
Windows vista - issues w/ linksys WRT54GC?
i have a new laptop running windows vista basic and i've tried two wireless routers so far - dlink DI-524 and now the Linksys WRT54GC.
With the dlink, I was able to connect, but unable to create a WEP password. Also, I named the network Home123, but it kept showing up as 'default' in My Networks. my wife was using her MacBook and it kept showing up as 'default' also.
So I purchased the new Linksys WRT54GC because the Dlink was over 2 years old and thought that may have been an issue. Well, tonight, I was able to connect to the Internet again, but the cdrom setup never recognized my router and it never asked me for creating a password.
Does anyone know is Vista has issues with wireless routers? Am I doing something wrong??
thanks!corleone, thanks, tried this.
but still no dice. on my vista network manager, my pc is connected to the router correctly, but the router is not connected to the internet at all. there is a red X. i asked vista to diagnose it and it said there may be a DNS issue...
can anyone help?
last resort is to get an airport exreme from apple for my wife's mac. but i heard windows have issues with airports..
thanks.
Corleone wrote:
Well..try setting up the router manually....
connect the laptop to one of the LAN ports of the router and connect the modem to the internet port ....
access the router ui using http://192.168.1.1 . Keep the username blank and password is "admin"....once on the router ui, click on "mac address clone" subtab....enable it and click "clone my pc's mac"..save the settings and do a power cycle....
click on the "wireless" tab and change the ssid, channel - 1 or 11, under wireless security , select wpa and enter the password ( min 8 characters).. -
[Forum FAQ] Common steps to start troubleshooting Windows Update issues
In this article, we provide you some common steps to quickly narrow down Windows Update issues. Before you post your question, you can follow the steps below to see whether
the issue can be identified and resolved. If not, please post it in Windows 8/8.1 Forum with the analyzed details.
Scenario 1: New updates can’t be checked.
Make sure your internet connection works fine.
Make sure you could connect to Windows Update Server or Microsoft Update.
For more information about how to troubleshoot problems connecting to Windows Update or to Microsoft Update,
visit the following Microsoft Web site:
http://support.microsoft.com/kb/818018
Scenario 2: Windows Update can’t be installed or configured.
Suggestion 1: Run the
Windows Update Troubleshooter
Press
WINDOWS + X combination key to open the Control Panel;
Change its view by “Category”;
Click
Find and fix problems;
Under
System and Security entry, click Fix problems with Windows Update.
Follow the instruction to complete it.
Suggestion 2:
Make sure the following services could startup automatically
Press WINDOWS + R combination key, type “services.msc”, press
Enter;
Find out the following services and the dependent services:
Windows Update
Background Intelligent Transfer Service
Windows Modules Installer
Double click every service, on General tab, set its Startup type as “Automatic”;
Click Apply and OK button.
Note: If these services miss or damage, you need to use Windows 8/8.1 installation media restore them.
Suggestion 3:
Delete the Windows Update cache
Press
WINDOWS + R combination key, type “services.msc”, press
Enter;
Find out the
Windows Update service, right click and stop it;
Located to
C:\Windows\SoftwareDistribution;
Delete the whole
SoftwareDistribution folder.
Suggestion 4:
Reset the Windows Update component
For more information about how to
reset the Windows update component,
visit the following Microsoft Web site:
http://support.microsoft.com/kb/971058
Suggestion 5:
Install the Windows Update in a
Clean Boot state
For more information about How to perform a clean boot in Windows,
visit the following Microsoft Web site:
http://support.microsoft.com/kb/929135
Suggestion 6:
Reset, refresh or restore your PC, and then try to Windows Update
http://windows.microsoft.com/en-gb/windows-8/restore-refresh-reset-pc
Scenario 3: You might still be repeatedly offered the same update.
You need to check its installation status and decide if it should be installed again.
For more
information about Windows Update or Microsoft Update repeatedly offers the same update,
visit the following Microsoft Web site:
http://support.microsoft.com/kb/910339
Here are the solutions for some common Windows Update error codes or corresponding issues:
1. .NET Framework update installation error: "0x80070643" or "0x643"
http://support.microsoft.com/kb/976982
2. Error 0x800B0100 when you try to install Windows Updates or Microsoft Updates
http://support.microsoft.com/kb/956702/en-us
3. Error 0x80070005 in Windows Update when you try to install updates
http://support.microsoft.com/kb/968003/en-us
4. Error message 80246008
http://support.microsoft.com/kb/971058
5. Error message 80070003
Stop Windows Update service, rename SoftwareDistribution and catroot2 folder, then restart Windows Update service.
6. Error message 0x80072f8f
Check and correct PC’s Time and Date.
7. Automatic Windows update settings is gray out.
Please locate to the below registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU.
Add Value name: NoAutoUpdate
Value data: 0 or 1
0: Automatic Updates is enabled (default).
1: Automatic Updates is disabled.
Windows Store app update general troubleshooting steps
If you're unable to open the Store, try running the
Apps troubleshooter
If you can’t find the app update. Please consider these scenario:
Confirm if you set the proxy which affect the Windows store update.
For more information about using authenticated proxy servers together with Windows
8, visit the following Microsoft Web site:
http://support.microsoft.com/kb/2778122
Confirm the app is available in your current region;
Make sure “Automatically update my apps” is set to Yes;
Make sure the latest updates are installed on your PC and that your antivirus program isn't preventing the app from running.
Make sure the app isn't blocked by Windows Firewall
Sync your app licenses.
Try to clear
the Windows store cache on your PC:
Press
WINDOWS + R combination key, type “wsreset”, press
Enter;
Try to install the update again.
Applies to: Windows 8 and Windows 8.1
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.NEW
ADK download link is unavailable
https://dev.windows.com/en-US/featured/hardware/windows-10-hardware-preview-tools
Working one here at the bottom of the page -
Hello, I'm surching to charge Version 2.1.1 from iCloud to Windows 64bite. Thanks a lot
Hello, I'm surching to charge Version 2.1.1 from iCloud to Windows 64bite. Thanks a lot
Hello Taleh,
Wer're just other users here trying to help other users, you'll have to contact Apple, maybe calmly ask to speak to a Customer representative, & see if they can help you.
Good luck & wishes.
Maybe you are looking for
-
Select sales orders from a list of order type
I have about 20 customed order types, Z001 to Z020, and I want to select about 8-9 out of the 20 order types. Currently, I am using SELECT VBELN ... INTO CORRESPONDING FIELDS OF TABLE IT_SO FROM VBAK WHERE AUART IN ('Z001', 'Z003', 'Z004', 'Z007', 'Z
-
Hello ! I have the following problem with my iPod and itunes: I have install the quick time player and i have bought the quick time pro 7. When I start the itunes for copie a video over itunes to may iPod I cannot change the Attitudes in itunes. All
-
Sales Planning, Head Count Planning & Financial planning--Basics
Hi All, Can someone please help me to understand below mentioned topic in terms of SAP BPC: Sales planning: GeneralBusiness Rules Basic reports in Sales Planning Head Count Planning: General Business Rules Basic reports in Head Count Planning Financi
-
Premiere pro freezes when exporting a project that has AE compositions in it?
PC - 970 nvidia, i7 4790k, premiere will export when the After effects clips are removed, but freezes at different stages of completion when the are left in.
-
Can the iPhone be used as a hotspot?
I Have heard the iPhone can be used as a hotspot? Is this correct?