Windows 7 64bit on bootcamp doesn't recognize the thunderbolt-ethernet adapter

in my new macbook pro retina I've a problem on window 7 64bit (bootcamp 4.0). the OS doesn't recognize the thunderbolt-ethernet adapter..

The thunderbolt ethernet adapter works without issue on my rMBP with Windows 7. Did you download and install the Windows Support software? Did you refer to the Windows help regarding networking? Did you try a different adapter? What happens when you try to use Ethernet networking?

Similar Messages

  • Is there a driver for the thunderbolt ethernet adapter on a 2010 Macbook Air?

    The thunderbolt ethernet adapter is not being recognized on my 2010 Macbook Air running 10.6.8. Is there a driver for it?

    That's because there's no thunderbolt port on the 2010 MBair.  You need to buy the USB ethernet adapter.
    http://store.apple.com/us/product/MC704ZM/A

  • Windows 7 in bootcamp does not recognize the wifi and usb

    i have just made the bootcamp with Win7. it does not recognize the wireless driver and the high resoltion screen.
    plus every time i have set the right click of trackpad.
    could any one help me in solving this issue?
    is there any way to upgrade the bootcamp driver from 3.0 to 3.3 without passing through 3.1 and 3.2?

    You might wan't to ask in the Boot Camp forum where the Boot Camp gurus hang out.
    https://discussions.apple.com/community/windows_software/boot_camp
    It sounds like you have not yet completed the Windows installation process by installing the Windows drivers.

  • Windows 7 with bootcamp doesn't recognize my 64-bit

    I have install Windows 7 32-bit on my iMac couple of months ago. Yesterday i tried to upgrade it to 64-bit( what i mean by upgrade is that i wiped all my windows partition from the iMac side and the started the installation), but when i was done doing all the bootcamp stuff and my computer booted with windows, it says i still run a 32-bit version of windows 7. I'm sure it was a 64-bit version and i have no clue what could be the problemm

    Are you sure your Mac supports 64 bit?
    http://support.apple.com/kb/HT1846
    If it does, I'll ask a moderator move this thread to the Boot Camp forum, where more people might know why it isn't working.

  • TS1538 iPod classic appears on my computer w/windows 8 but iTunes doesn't recognize the ipod

    My computer with Windows 8 recognizes &shows my iPod classic, but won't sync or show as a device when I attempt to update or sync it on iTunes

    READ the article from which the statement was posted and follow the troubleshooting steps provided.

  • Bootcamp, Bootcamp doesn't recognize Windows 7 partition

    Over my Max OS X (10.6.8), bootcamp doesn't recognize Windows 7 partition until few days. Windows 7 ever work on my iMac with bootcamp. Now the only way to boot on Windows 7 is to start with Setup CD of Windows 7 but unfortunately not with boocamp over my iMac.
    Please i need your help
    Laurent
    Poor french guy !!

    Answer this: do you have NTFS for OS X installed?
    That is the only time normally though not always that Windows won't show in
    System Preferences: Startup Disk: control panel
    > i have upgrade Bootcamp over Win7, i upgrade too Win7
    Boot Camp is only Apple drivers.
    So other than language, you are running Windows natively. Only.
    You don't upgrade Boot Camp. You probably do have Windows updates of course.

  • Bootcamp doesn't recognize Windows 7 partition. How can i do ?

    Over my Max OS X (10.6.8), bootcamp doesn't recognize Windows 7 partition until few days. Windows 7 ever work on my iMac with bootcamp. Now the only way to boot on Windows 7 is to start with Setup CD of Windows 7 but unfortunately not with boocamp over my iMac.
    Please i need your help
    Laurent
    Poor french guy !!

    You should read the Boot Camp Installation Guide.
    http://www.apple.com/support/bootcamp/
    And you should visit the Boot Camp forum. You posted in the Snow Leopard forum. https://discussions.apple.com/community/windows_software/boot_camp

  • I am trying to sync an old ipod nano (2nd generation) to my itunes on a windows pc but the itunes doesn't recognize the nano and says that it is synced with another computer. Unfortunately, I don't have the old computer now. How do I sync this nano to itu

    I am trying to sync an old ipod nano (2nd generation) to my itunes on a windows pc but the itunes doesn't recognize the nano and says that it is synced with another  computer. Unfortunately, I don't have the old computer now. How do I sync this nano to itunes ?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • I just bought an iPod nano 7th gen.  When I connect it to my laptop, it doesn't recognize the ipod.  I tried charging it, but now it won't turn on when i push the power button.  Please help me!  I don't want to have to return it.

    I just bought an iPod nano 7th Generation.  When i connect it to my laptop, it doesn't recognize the ipod.  I tried charging it but when I hold the power button, nothing happens.  I don't want to have to return it.  Please help me!

    Hi dnix257,
    Welcome to the Support Communities!
    What version of the Windows Operating System do you have?
    What version of the iTunes software?
    The troubleshooting steps below may help you with this:
    Apple - Support - iPod nano - iTunes Troubleshooting Assistant
    http://www.apple.com/support/ipodnano/assistant/itunes/#section_1
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Cheers,
    - Judy

  • My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?

    My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?
    When I connect my iPod to my computer, nothing happens. I've read the tips in the section "support" and I noticed that maybe Windows 8 is not one of the operating systems that are compatible with an iPod nano 7th generation. If I'm right, what can I do if my only device is a Windows 8?

    Hi, Grafiti. 
    Thank you for the question.  Below, I have attached a couple troubleshooting articles that will help resolve the device not being recognized by iTunes.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    If the issue still persists after processing these steps, see the section in the article below labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8.
    Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • Accidental​ly uninstalle​d YouCam now computer doesn't recognize the camera

    Accidentally uninstalled YouCam and now the computer can't find the camera.  No driver can be installed because it doesn't recognize the camera.  Can't put YouCam back on either.  Tryed even puting an external camera on and and can't seem to get the DVD working

    Please identify your notebook/pc .
    Look at the base/rear/side of the notebook/pc at the barcoded sticker.
    Post items numbered 1 and 2 on the following example of an HP notebook's barcoded sticker. Your barcode may be slightly different but will still have the important imformation needed for us to help you.  The p/n (product name)is the most important identifying information
    ###Do not post the serial number as it is personal information.###
    Post the installed operating system version ( and whether it is 32 or 64-bit ) and whether the CPU is an AMD or Intel product.
    Not posting all of the information as requested will delay our responses and slow troubleshooting of the issue that led you to author a thread.
    Is your notebook/PC still within its warranty period?
    Best regards, 
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • HT3204 I was in the process of restoring my ipad and an issue with itunes came up and itunes closed. Now my computer doesn't recognize the ipad as anything so I can't complete the restore process.

    I was in the process of restoring my ipad and an issue came up with itunes and it had to close. I reopened itunes but now my computer doesn't recognize the ipad as anything plugged in to my computer. I am unable to complete the restore process.

    Hi kimbo934,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    I hope this information helps ....
    Happy Holidays!
    - Judy

  • I downloaded 2 cds onto my ipod nano through itunes.  Recently my itunes account changed and now it doesn't recognize the songs from the cds.  How to transfer from ipod back to itunes?  I don't have the cds anymore.

    I downloaded 2 cds onto my ipod nano through itunes.  Recently my itunes account changed for some unknown reason and now it doesn't recognize the songs from the cds.  The songs are still on my ipod.  I am affraid to sync now because the songs may be deleated, and I don't have the cds anymore.  How can I transfer the songs from the cds on my ipod back to itunes so that I don't lose them? 

    What you have on your computer is your iTunes library, not your "account."  The "account" you have for iTunes is your Apple ID, which you use when purchasing or downloading from the iTunes Store.  If these songs came from music CDs that you imported into iTunes, those songs are not related to your Apple ID.
    Recently my itunes account changed for some unknown reason and now it doesn't recognize the songs from the cds
    How are they not "recognized"?  Are the songs still listed in your iTunes music library, but grayed out?  They no longer appear in your iTunes library at all?
    If you search your computer (not in iTunes) for the song files, using one of the song names, can you find the song files?

  • I can't connect my camera to my Mac tower - final cut doesn't recognize the connection.

    I have a Canon AH X1 video camera which uses the older 6 pin firewire - I have a 6 pin to 9 pin adapter, but when I connect the camera and go to Capture and Log, it doesn't recognize the camera is connected.  Even when I click NOW, it does nothing.  My camera output settings have been set by the manual for this type of connection, HD and downgrade OFF, or something like that (don't have the camera in front of me this moment).  Any ideas?
    Thank you!

    Thanks for the quick response!  I have a smokin' Mac Tower - 2 x 2.4 GHz Quad-Core, 10GB RAM, Mac OS 10.6.7.
    I am running 6 pin firewire using a 9 pin adapter.  I have one internal hard drive - 999GB, formatted Mac OS Extended (Journaled) - 914G are free.
    Camera Settings - Playback STD - Comp out 1080i/480i
    HD Down Conversion - OFF
    When I start up Final Cut Pro, it says
    External A/V Unable to locate the following external devices:
    Apple FireWire NTSC (720 x 480)
    Your system configuration may have changed, or your deck/camera may be disconnected or turned off.
    Please check your connections and click "Check Again" , or click "Continue" to set external device detection to None.
    Then, when I go to Log and Capture, I get:
    Unable to initialize video deck.  You may still log offline clips or use Capture Now.
    Beneath that, "Initializing Device Control..." stays up and frozen. 
    THEN, if I click OK and Capture NOW, I get a quick flash of a screen that disappears, and nothing happens.
    Thanks in advance...

  • Is there an EASY way to submit podcasts to the itunes store? i've tried creating podcasts in garageband, then somewhere after wordpress  itunes  doesn't recognize the feed. my process has been (i am open to suggestions for other free and EASY services/me

    is there an EASY way to submit podcasts to the itunes store? i've tried creating podcasts in garageband, then somewhere after wordpress  itunes  doesn't recognize the feed.
    my process has been (i am open to suggestions for other free and EASY services/methods):
    garageband : create & edit audio. add 1400x1400 image.
    share to itunes.
    drag file to desktop.
    upload .m4a file to google drive.
    create a link post in wordpress using "podcast" tag & create "podcast" category.
    click on "entries rss" in wordpress, which takes me to the rss subscribe page (which is basically just my wordpress address with "/feed" at the end.
    i copy this url.
    go to itunes store > then "submit a podcast"
    itunes gives me the error message "we had difficulty downloading episodes from your feed."
    when i try to subscribe to my podcast in itunes, it does, but gives me no episodes available.
    i went back into wordpress and changed settings/ reading settings to : "full text" from "summary"
    still the same error message.
    i added a feedburner step after wordpress but got the same errors. i don't think i should have to add feedburner.
    wordpress seems to be encapsulating the rss, what am i doing wrong?
    this so much easier when you could go directly from garage band to iweb to mobileme; i miss those apple days (also idisk).

    if anyone has a super EASY process, i would LOVE to know what it is. EASY, meaning no html and also free. there are many free online storage systems available, many of which i currently use. the above process was just me trying to figure it out, if you have an easier method, please share. thank you so much!

Maybe you are looking for