Windows 7 64bit Photostream Problem

Hi,
I have installed the windows iCloud Control Panel, all installed OK.
When I open the control panel it says
applephotostream.exe has stopped working
It will then not allow men to set up the photo stream.
I guess it is either an X64 problem or conflicting with something, I've installed it about 4 times no....
Can anybody help????

I too have this problem. Windows displays th following problem details:
Problem signature:
Problem Event Name:          BEX
Application Name:          ApplePhotoStreams.exe
Application Version:          7.1.75.5
Application Timestamp:          4eb0a8dc
Fault Module Name:          MSVCR80.dll
Fault Module Version:          8.0.50727.6195
Fault Module Timestamp:          4dcddbf3
Exception Offset:          000267ac
Exception Code:          c000000d
Exception Data:          00000000
OS Version:          6.1.7600.2.0.0.256.48
Locale ID:          1053
Additional Information 1:          2e88
Additional Information 2:          2e88e4e14ecd6a84a26aa264030e8d02
Additional Information 3:          13fb
Additional Information 4:          13fba8a7e93b7fcee23a8c94da19e096
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Please help Apple! I thought your software was reliable...

Similar Messages

Lenovo D20, Type 4155-21G With 5x1.5tb Raid 5, Windows 7 64bit install problem.

H
Id like to just document a current machine and works and see if any thing is glaringly wrong..
Above spec machine has an onboard marrvel 66xx raid card, a raid 5 volume has been created, total useable space is around 5.5TB.
The software in play here is the following..
Orignal Lenovo recovery disk set, this is Rescue and recovery boot disk 1, then the OS which is Vista 32 Business, the disk label is actual 64bit but its not 64bit its 32bit.
The machine finally has to leave with Windows 7 64bit ultimate.
I have looked into the upgrade paths and so on and basicly you need vista 64bit ultimate in theory, certain hacks are possible such as renaming the os level or name via the registery, but this is dirverting from my post.
Here is what has been done and what has happend.
20th Jan.
Start of day.
Raid 5 volume created.
Factory recovery completed windows vista business 32bit.
Attempt to upgrade Windows vista business to Windows 7 ultimate from with in windows, windows 7 alerts this is not a compatable system etc.
At this stage since the 64bit upgrade is not possible from the known good lenovo state (lenovo vista business factory desktop etc) the second disks in the "Windows 7 32bit + 64bit any time upgrade package was ran.
The 32bit version of the Windows 7 ultimate was ran, this did complete sucessfully.
The 64bit version of the windows 7 was attempted once more from with in the newly installed Windows 7 32 bit but again this upgrade route is not supported.
At this stage a custom install was completed (which means a fresh install which wipes the drive) / fresh install, of the windows 7 64bit any time upgrade disk.
For some reason the Windows 7 64bit any time upgrade key failed to be accepted.
At this stage a second engineer repeated all steps completed to verify and on the second go around the FRESH install of Windows 64bit any time upgrade (stand alone install / custom etc) the key worked!..
This is were it gets interesting.
Lets recap, we have a D20 with 5x1.5tb sata hard drives in raid 5, all on the onboard marvel raid card.
Windows 7 64bit has been sucessfully installed, and of course the next step is to install the lenovo system update tool. (version for windows 7, I understand this is fully 64bit compatable..)
This was completed and pc doctor and one other misc application install, the system requested to restart and then ....
The raid BIOS of the marvel card reported that the raid had become degraded..!!
An inspection of the onboard raid information results that the disk 0 of the 5 disks, was no longer assigned to the RAID 5, with teh remaining several disks still "assigned".
At this stage the only option is to delete the raid five array and recreate it.
This has been done and the factory recovery process has once again been restarted and an attempt will be made to perform the custom install with hopefully the windows 7 64bit any time upgrade install detecting the previous version although I would say that it would not need to detect anything since this is now longer an upgrade but a custom fresh install.
Further information.
There is a System bios update from the 5th of Jan 2010, this has been burnt to cd and will be applyed against the machine shortly.
We have had some conversation about just how it is that a disk can fatally pop out from the raid five volume like this, was it a coincidence that it coninsided with the power cycle process dirrectly after the system update installation?
Tommorow a Windows 64bit OEM package will be applied against this machine and since we have the relivant driver file for the onboard raid card (sourced from the drivers and applications lenovo recovery disk set), there should be less of a problem in key acceptance.
Kind of a werid situation, what looks like a possible hardware problem and a stupid microsoft upgrade qulification problem.
Is there any thing stupid I have over looked?
Thanks, sorry for the long post but this is the story in full.
Note from Moderator: Fixed formatting issue.

21st Jan..
The D20 has sucessfully had vista business factory reinstalled and then Windows 7 64bit installed.
Dirrectly after the Windows 7 installation and power cycle, one of the five 1.5tb hard drives have dropped out of the raid, visable as "DEGRADED", uppon further inspection via control m, the middle drive (not drive 0 as before) drive 2 (0,1,2,3,4,5) has dropped out and is not marked as assigned, it is marked with no label or free.
This is high strangeness, it is my understanding that the RAID technologies are transparent to the OS so it should not be in any way the Windows 7 install triggering this, the last occurance was also during a Windows 7 power cycle but dirrectly after the system update tool being installed.
At this stage it would appear that Windows 7 64-bit used in conjunction with the supplment driver disk marked as (drivers and apps, windows xp vista, windows 7) is not able to complete and remain stable.
I suspect a possible driver issue but if this was the case surely the windows 7 install would not progress past the first installation point where the driver disks is required to actually use and see the array via the controler.
I will update this thread with more information as it becomes available.
Machine delivery eta to customer is tommorow so this is not good.

Windows 64Bit Itunes Error : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR."

I have a brand new HP laptop windows 64bit that is having issues installing Itunes 10.6.3. Whenever attempting to install, I get the error message : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR." I thought this was an issue with the new version, and attempted to retrieve/install older versions of Itunes and same issue occurs. I have tried other forums and resolution tips from : https://discussions.apple.com/docs/DOC-3551 and nothing still. It appears that apple installs bonjour and nothing else. I have tried extracting the itunes package and installing the executables seperately, but everytime the error stil arises. I cannot repair the apple software update as it cannot install from the error mentioned above. Looking through the logs, it shows error : 1721, problem with windows installer package.Does anyone have any suggestions on what to try?

There are so many different error and problems peopl are having.
This is a link to mine
https://discussions.apple.com/thread/3467825
I think it has to be something on Apples end.
Hopefully they fix it soon. Ive used a few GB redownloading and Im going crazy
hope this settles you a bit

Problem installing itunes on windows 64bit

problem installing itunes on windows 64bit, help me!!!

Yes, when I try to install the iTunes software on my notebook, running Windows 7 64-bit, I get a window that says: "There were errors before iTunes could be configured. Error during installation. Computer was not changed. "thanks

I updated to itunes 11, uninstalled it according to directions, and re-installed itunes 10.7.021 for windows 64bit. Now Iget the message itunes library.itl cannot be read because it was created by an earlier version of itunes

I updated my computer to Itune 11, did not like it, and uninstalled it exactly according to directions. I re-installed Itune10.7.021 for Windows 64bit, but now I keep getting the message "The file itunes library.itl cannot be read because it was created by a newer version of itunes. How can I resolve this problem?

zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Windows 8.1 Problems

Hi Everyone,
I recently purchased Windows 8.1 and I've been having so many problems, I'm not sure what to do. I get constant blue screens with various messages. I've reinstalled windows 8.1 about 5 times already trying to fix problems. I've run chkdsk and it came up
clean. I've also run the windows memory diagnostic tool and that came up clean. I've run antivirus scans multiple times and those have come up clean. I've used avast for the virus scans, but I thought avast could have been the problem, so I removed it and
also scanned using windows defender. It still comes up clean. I've ran sfc /scannow and the first time, I received the error message that it couldn't perform the requested operation. I did the dism command and then my comp restarted. I did sfc scan again
and it came up that no problems found. I installed 2 windows updates 1 for windows defender updates (KB2267602) and the other Cumulative Security Update for IE 11 (KB2976627). After those were installed I ran sfc again and that came up could not perform
requested operation. I did the dism command again and the result was component store is repairable, the operation completed successfully. I run the sfc scan again and I get the same error again: Windows Resource Protection could not perform the requested
operation. I'm running out of ideas and I have nothing install on my computer since I just did a clean install. I only have my wireless adapter for the internet along with my keyboard and mouse.
I also just ran dism /online /cleanup-image /startcomponentcleanup and that actually completed to 100%, but I'm sure the sfc scan will once again come back with the same error. Can anyone help me out?

Hi! Ok so I originally had vista 32 bit & bought windows 8.1. I have a 64bit processor, so I decided to do a clean install & wipe my drive. After I installed windows 8.1 I'd get random blue screens ranging from the bad pool error to system exception. No
real explanation, but random blue screens frequently. I was told by a comp tech to run the dism command. The only thing I recently did after this installation was create a restore point because it's the first time sfc came back at 100% with no errors. I haven't
taken an image of any system to put it on my comp I only used the windows 64bit cd from Microsoft. I'm really confused by all this and frustrated because I have no idea what the problem is. I even tried to refresh my PC via windows recovery & it said there
was an error, so nothing was changed. A few minutes ago I just reset my PC & that's still going currently.

Install oracle 10g (32bits) on windows (64bits)

hi,
Have anyone tried installing oracle10g 32bits on windows 64bits platform before? Will it cause any problems and what are the drawbacks?
Thanks

hi,
Have anyone tried installing oracle10g 32bits on windows 64bits platform before? Will it cause any problems and what are the drawbacks?
Thanks

TS3212 How i can download iTunes for Windows 64Bit if I have downloading this through Linux Ubuntu?

How i can download iTunes for Windows 64Bit if I have downloading this through Linux Ubuntu?

Thank you for you answer, but it isn't heart of the problem. The problem is that I don't have choose iTunes version manually, it's happens automatically, and start downloading iTunes for Windows 32-bit.

Install Oracle Clusterware/RAC Windows x32bit or Windows 64bit ?

Hi,
What is your suggestion to install Oracle Clusterware RAC on Windows.
Why choose Windows 32 bit ?
Why choose Windows 64 bit?
What are the advantages and disadvantages?

Hi,
I definitely recommend 64bit Windows, the principal reason is memory addressing limitation.
In my standpoint do not exist benefits to use Windows 32bit with Oracle Clusterware/RAC.
32-bit processors have address registers that are 32-bits wide (can address up to 4GB physical RAM).
You can to use a workaround by enabling the addressing of more than 4GBytes using parameters in Windows (AWE/PAE). But if I want to use more than 4Gbytes, I'll go to Windows 64bit.
The 4GB addressable space per process is divided into system and user space. By default, the system space is 2GB and the private user space is 2GB. Each user process shares the same 2GB System address space.
The services of the Clusterware, ASM and Listener will consume at least 1Gbyte of memory initially.
If you create an instance to to use 1Gbytes and you have 50 connections you will have problems with connections to the database raising the following error.
TNS-00510: Internal limit restriction exceeded
32-bit Windows Error: 8: Exec format error
TNS-00507: Connection closed
32-bit Windows Error: 109: Unknown errorReason: Problems of memory usage. i.e. Out of Memory.
Another point:
With Windows 32-bit using Clusterware/RAC 11.1 you can set Automatic Memory Management(AMM) feature (MEMORY_TARGET) but you cannot use if you create 2 Instances on same Host.
Check this note..
*ORA-27102, OSD-00031 Unable To Extend Memory_max_target And Memory_target Past 2GB [ID 842881.1]*
Oracle Solution: Please install the 64-bit OS on 64-bit server, hence there is no memory limitations
I belive that is reason wich Oracle not support Oracle Grid Infrastructure 11.2 on Windows 32-bit. You cannot use ASM 11.2 on Windows 32-bit.
Definitely do not exist reason for me to to use Windows 32bit to support Oracle Clusterware.
There are lot services involved wich require memory and a big limitation of memory on 32-bit.
At present all latest CPUs support 64bit. Then install Oracle Clusterware/RAC x64, even when you are use less than 4GBytes memory, you only have benefits.
Benefits of Use 64-bit are:
64-bit versions of Windows have implemented up to 16 terabytes of virtual address space
64-bit programs use the 16 terabyte tuning model (8TB user / 8TB kernel)
No performance penalties for large memory
Unlimited user connectivity
64-bit Windows versions allow addressing of large physical memory sizes without using PAE
*Windows Memory Configuration: 32-bit and 64-bit [ID 873752.1]*
This document gives a better understanding of my perspective.
http://levipereira.wordpress.com/2011/02/12/comparison-of-32-bit-and-64-bit-oracle-database-performance-on-the-dell-poweredge-6850-server-with-microsoft-windows-server-2003/
Regards,
Levi Pereira

Win7 and newest itunes 64bit install problem

I have not seen my itunes installation problem here on the forum yet. I hope someone can help.
I completely removed Itunes per the Apple instructions, in the correct order, and verified all was gone from the computer. I downloaded the latest version for my 64bit computer (Win7), which currently is 10.5.1 for windows 64bit system. After installing it, I receive a message saying that "this ipod cannot be used because the required software is not installed. Run the itunes installer to remove itunes then reinstall the 64bit version of itunes.
I've done that no less than 4 times now, same message. Has someone a fix or idea for this problem?

Try to use 10.3 instead, the 10.5.1 dont work on all PC computers, I couldent install the 10.5.1 but 10,3 installes without any problem. I have a good cumputer so it is nothing wrong there so it is only a bad program from apple.

ODBC Driver at Windows 64bit 2003

Dear All,
I tried to install the Oracle ODBC driver for the windows 64bit 2003 but the driver did not added to the ODBC drivers list in the "Data Sources (ODBC)" at the Administrative tools in the control panel.
This is a big problem for me because I need to add Oracle database at the SQL server as a Linked Server and the SQL server need the OLE DB Provider which comes with the ODBC driver
Please provide me with ODBC driver or direct me to the right direction
Thanks in advance
Rashed

OpenLink Software provide Oracle ODBC Drivers for 64bit Windows which are available for download from:
http://bit.ly/8Ut5qN
Details on installation and configuration is available from:
http://bit.ly/4vHs7E
Best Regards
Product Support
OpenLink Software
http://www.openlinksw.com

MOVED: MS-7030 Windows 64bit Drivers

This topic has been moved to Operating Systems.
MS-7030 Windows 64bit Drivers

Hello
Sorry the board is a 7366, when I boot off the windows CD it does not find the HDD becaue the drivers are not present - will look at the nvidia site but have had no luck so far.
Quote from: Jack the Newbie on 16-March-09, 19:48:16
Hello,
is your board's model number really MS-7633? Did you mean "MS-7366" perhaps?
Please double-check. The following thread will tell you where to look:
https://forum-en.msi.com/index.php?topic=113146.0
Last time you posted, you mentioned an MS-7366 board:
https://forum-en.msi.com/index.php?topic=121563.msg917935#msg917935
Which is one of these:
http://global.msi.eu/index.php?func=proddesc&maincat_no=1&prod_no=1498
Windows XP 64bit drivers for NVIDIA Chipset boards can be obtained directly from NVIDIA.
What exactly is your problem?
With Optimized Defaults loaded in BIOS Setup, no additional drivers are necessary for any OS Installation. Make sure your XP 64bit Installation CD includes the latest Service Pack. That is all you should need to take care of.

I have lightroom 5 with 5.7 updated. I use windows. My problem is with the spot healer or remover. It worked perfectly when I click on it it don't have the additional circle with a line attached to it where I can move it to another place for better sa

I have lightroom 5 with 5.7 verson updated. I use windows. My problem is with the spot healer or remover in the develop. It worked perfectly for a while and then suddenly the other circle with a line attached to it where you can move it to a better spot stopped showing up. I uninstalled the software and re installed it again but it didn't fix the problem and its still the same. Help please.

Does the iPod work OK?
Does it charge when connect to the computer?
Does it appear in My Computer?
Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
http://support.apple.com/kb/HT1353#iPod_touch_late2009
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

TS3074 im can u please help me out this issue im trying to install iTunes in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

im can u please help me out this issue im trying to install iTunes in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

Try the following user tip:
" ... A DLL required for this installation to complete could not be run ..." error messages when installing iTunes for Windows

Elem 4.0 in Windows 7 without problems ?

Is it possible tun run Photoshop Elem 4.0 in Windows 7 without problems ?
Warnings about compability problems.

Please refer to this related post
http://forums.adobe.com/message/4964761#4964761

Windows 7 64bit Photostream Problem

Similar Messages

Maybe you are looking for