Windows 7 64bit Problem

So i finally get windows 7 booted up in bootcamp, and i find out i need 64bit. So i get rid of my 32 bit and my partition, re partition it, and load up 64 bit windows. When i go to my windows support drivers and click the setup.exe file, it says it is not compatible with windows 64 bit. I researched this, and nothing really comes up. I proceded to go into every driver folder and install them all on there own. It worked for almost all of them, but some dont seem to work. My windows 7 works fine, the only problem is none of the trackpad gestures work like on the mac, i cant change back the keyboard to original functions, and the boot camp manager tool in the bottom right corner is not there. This forces me to hold the option key down or it will always boot in windows. And i cant change any settings. Anyone have any help?

If you have one of the earier Mac Pro models like 1,1, 64 bit mode is not supported by Apple.
I got it working by decompressing the 3.0 installer, and manually installing 64 bit drivers in admi mode. After that, the updaters (3.1, 3.2) worked.
But with Lion, the Control Panel is broken, since it does not recognize the new disk information holding startup info, and refuses to load.
Do not use BootCamp 4 on the older configurations. I ended up not being able to boot, nor uninstall the disaster.

Similar Messages

Windows 64Bit Itunes Error : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR."

I have a brand new HP laptop windows 64bit that is having issues installing Itunes 10.6.3. Whenever attempting to install, I get the error message : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR." I thought this was an issue with the new version, and attempted to retrieve/install older versions of Itunes and same issue occurs. I have tried other forums and resolution tips from : https://discussions.apple.com/docs/DOC-3551 and nothing still. It appears that apple installs bonjour and nothing else. I have tried extracting the itunes package and installing the executables seperately, but everytime the error stil arises. I cannot repair the apple software update as it cannot install from the error mentioned above. Looking through the logs, it shows error : 1721, problem with windows installer package.Does anyone have any suggestions on what to try?

There are so many different error and problems peopl are having.
This is a link to mine
https://discussions.apple.com/thread/3467825
I think it has to be something on Apples end.
Hopefully they fix it soon. Ive used a few GB redownloading and Im going crazy
hope this settles you a bit

Problem installing itunes on windows 64bit

problem installing itunes on windows 64bit, help me!!!

Yes, when I try to install the iTunes software on my notebook, running Windows 7 64-bit, I get a window that says: "There were errors before iTunes could be configured. Error during installation. Computer was not changed. "thanks

I updated to itunes 11, uninstalled it according to directions, and re-installed itunes 10.7.021 for windows 64bit. Now Iget the message itunes library.itl cannot be read because it was created by an earlier version of itunes

I updated my computer to Itune 11, did not like it, and uninstalled it exactly according to directions. I re-installed Itune10.7.021 for Windows 64bit, but now I keep getting the message "The file itunes library.itl cannot be read because it was created by a newer version of itunes. How can I resolve this problem?

zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Install oracle 10g (32bits) on windows (64bits)

hi,
Have anyone tried installing oracle10g 32bits on windows 64bits platform before? Will it cause any problems and what are the drawbacks?
Thanks

hi,
Have anyone tried installing oracle10g 32bits on windows 64bits platform before? Will it cause any problems and what are the drawbacks?
Thanks

TS3212 How i can download iTunes for Windows 64Bit if I have downloading this through Linux Ubuntu?

How i can download iTunes for Windows 64Bit if I have downloading this through Linux Ubuntu?

Thank you for you answer, but it isn't heart of the problem. The problem is that I don't have choose iTunes version manually, it's happens automatically, and start downloading iTunes for Windows 32-bit.

Install Oracle Clusterware/RAC Windows x32bit or Windows 64bit ?

Hi,
What is your suggestion to install Oracle Clusterware RAC on Windows.
Why choose Windows 32 bit ?
Why choose Windows 64 bit?
What are the advantages and disadvantages?

Hi,
I definitely recommend 64bit Windows, the principal reason is memory addressing limitation.
In my standpoint do not exist benefits to use Windows 32bit with Oracle Clusterware/RAC.
32-bit processors have address registers that are 32-bits wide (can address up to 4GB physical RAM).
You can to use a workaround by enabling the addressing of more than 4GBytes using parameters in Windows (AWE/PAE). But if I want to use more than 4Gbytes, I'll go to Windows 64bit.
The 4GB addressable space per process is divided into system and user space. By default, the system space is 2GB and the private user space is 2GB. Each user process shares the same 2GB System address space.
The services of the Clusterware, ASM and Listener will consume at least 1Gbyte of memory initially.
If you create an instance to to use 1Gbytes and you have 50 connections you will have problems with connections to the database raising the following error.
TNS-00510: Internal limit restriction exceeded
32-bit Windows Error: 8: Exec format error
TNS-00507: Connection closed
32-bit Windows Error: 109: Unknown errorReason: Problems of memory usage. i.e. Out of Memory.
Another point:
With Windows 32-bit using Clusterware/RAC 11.1 you can set Automatic Memory Management(AMM) feature (MEMORY_TARGET) but you cannot use if you create 2 Instances on same Host.
Check this note..
*ORA-27102, OSD-00031 Unable To Extend Memory_max_target And Memory_target Past 2GB [ID 842881.1]*
Oracle Solution: Please install the 64-bit OS on 64-bit server, hence there is no memory limitations
I belive that is reason wich Oracle not support Oracle Grid Infrastructure 11.2 on Windows 32-bit. You cannot use ASM 11.2 on Windows 32-bit.
Definitely do not exist reason for me to to use Windows 32bit to support Oracle Clusterware.
There are lot services involved wich require memory and a big limitation of memory on 32-bit.
At present all latest CPUs support 64bit. Then install Oracle Clusterware/RAC x64, even when you are use less than 4GBytes memory, you only have benefits.
Benefits of Use 64-bit are:
64-bit versions of Windows have implemented up to 16 terabytes of virtual address space
64-bit programs use the 16 terabyte tuning model (8TB user / 8TB kernel)
No performance penalties for large memory
Unlimited user connectivity
64-bit Windows versions allow addressing of large physical memory sizes without using PAE
*Windows Memory Configuration: 32-bit and 64-bit [ID 873752.1]*
This document gives a better understanding of my perspective.
http://levipereira.wordpress.com/2011/02/12/comparison-of-32-bit-and-64-bit-oracle-database-performance-on-the-dell-poweredge-6850-server-with-microsoft-windows-server-2003/
Regards,
Levi Pereira

ODBC Driver at Windows 64bit 2003

Dear All,
I tried to install the Oracle ODBC driver for the windows 64bit 2003 but the driver did not added to the ODBC drivers list in the "Data Sources (ODBC)" at the Administrative tools in the control panel.
This is a big problem for me because I need to add Oracle database at the SQL server as a Linked Server and the SQL server need the OLE DB Provider which comes with the ODBC driver
Please provide me with ODBC driver or direct me to the right direction
Thanks in advance
Rashed

OpenLink Software provide Oracle ODBC Drivers for 64bit Windows which are available for download from:
http://bit.ly/8Ut5qN
Details on installation and configuration is available from:
http://bit.ly/4vHs7E
Best Regards
Product Support
OpenLink Software
http://www.openlinksw.com

MOVED: MS-7030 Windows 64bit Drivers

This topic has been moved to Operating Systems.
MS-7030 Windows 64bit Drivers

Hello
Sorry the board is a 7366, when I boot off the windows CD it does not find the HDD becaue the drivers are not present - will look at the nvidia site but have had no luck so far.
Quote from: Jack the Newbie on 16-March-09, 19:48:16
Hello,
is your board's model number really MS-7633? Did you mean "MS-7366" perhaps?
Please double-check. The following thread will tell you where to look:
https://forum-en.msi.com/index.php?topic=113146.0
Last time you posted, you mentioned an MS-7366 board:
https://forum-en.msi.com/index.php?topic=121563.msg917935#msg917935
Which is one of these:
http://global.msi.eu/index.php?func=proddesc&maincat_no=1&prod_no=1498
Windows XP 64bit drivers for NVIDIA Chipset boards can be obtained directly from NVIDIA.
What exactly is your problem?
With Optimized Defaults loaded in BIOS Setup, no additional drivers are necessary for any OS Installation. Make sure your XP 64bit Installation CD includes the latest Service Pack. That is all you should need to take care of.

Reports 6i windows display problem on Windows NT system

Iam using Reports 6i on Windows NT.All the reports 6i windows are became transporent windows, displying problem (repainting problem). I did fresh installation. But iam not able to solve this.

I am using same fonts on all these plateforms.Look more closely at those fonts. They may have the same names, but the Windows 2000 versions may be larger (able to render more characters).

[SOLVED] GNOME 3.8 annoying window resize problem

Hello all fellow early-adopters :-)
A very annoying quirk I've noticed, moving from GNOME 3.6 to 3.8, is that it no longer remembers, nor retains, the size/positions I set for many of my application windows. For example, my mail client (Evolution) is sized to fill most of my screen (centrally), with Empathy and Skype as long narrow windows on both sides - giving me a nice, broad "communications" overview on that particular desktop (with dev tools etc open on others).
On 3.6, this layout was retained during my session, as well as next time I started these apps up.
In GNOME 3.8, not only does it insist that these windows are always started as small little bunched-up windows that I need to resize, but every time a window displays a notification/warning (message in internal yellow bar inside the window - such as loss of internet connection, mail retrieval failure etc) it resizes the windows spontaneously to a stupid, small size that overlays the other windows. This is driving me crazy!
Where can I learn a bit more about how window sizing / positioning works in GNOME 3.8, or is it finally time to switch to awesome wm? I want to love GNOME 3.8, I really do. It's so slick, but so... unpolished.
I want to dig in an assist with problems like these, but I need some pointers to some background material first to understand the problem. Is it the window manager? Is it the app?
** UPDATE: Doing a full system upgrade, as of May 18, 2013, has resolved this annoying problem. My windows now stay where they belong, and start with the same size they were closed with. GNOME is now pleasant to use again :-)
Last edited by dawid.loubser (2013-05-21 13:37:25)

dawid.loubser wrote:Thanks for the suggestion drtebi - I'll give it a try.
I really like GNOME 3.x though (and would like to understand the windowing behaviour), but if the annoying quirks are insurmountable, I will happily switch.
Man I love GNOME 3.x. I admire the courage they had to change, basically, everything, and I find myself more productive with my GNOME 3 Arch box than with my good ol' Slackware KDE 4 box. I just hate those bugs - for example I filed a task in their bugtracker for this window resize problem I have with gedit. If it's a love/hate relationship, I think it's marriage ^_^
With the 3.8 upgrade, deadbeef was having a similar problem with window size/position. I just recompiled it against the latest GTK+3 package upgrade (that came after the 'big upgrade' here on Arch) and it was fixed. But not with gedit
bwat47 wrote:
Man I really hope this gets fixed soon, because aside from this one incredibly annoying issue I am loving gnome 3.8.
I get the feeling gnome badly needs more beta testers, sizable regressions like this in "stable" releases happen way too often sad.
I get the exact same feeling. Well bugs exist everywhere, there's no denying. But I think it would be wiser to 'alternate' the nature of each major stable release - one focusing on new features and one focusing on fixing bugs. For example if the only new features in GNOME 3.10 were the AppsFolder full implementation and the introduction of gnome-calendar, and the rest of the development cicle being devoted to fix bugs, I'd be more than happy.
Like Fedora and Ubuntu, the fixed 6-month release cycle colaborates with the bugs. They don't do like Debian or Slackware which are released 'when they are ready'.
EDIT: fout (yet) another bug. At least with facebook chat (haven't tested with other telepathy plugins) the buddy tray icon appear duplicate. Anybody with the same issue?
Last edited by lmello (2013-05-02 14:06:06)

Connecting iPod Nano 8GB video model to Windows 2k problems

Hello!
I hope someone can help, I had a MacBook that died and now I need to move our 4 iPods to the windows 2k environment. When you plug in the iPod it says that it needs to be converted to Windows, not problem, I click "OK" then iTunes starts and gives me the following message:
The iPod "IPOD2" cannot be used because it requires iTunes version 7.6 or later.
Go to www.itunes.com to download the latest version of iTunes.
Ther is NO 7.6 for Windows 2K? Any help could be appreciated.
I have the latest version for W2K, and I have 1 Nano that has syncd fine. Anyone have any ideas, I have searched and tried all the tech docs I could find to no avail. The iPod is visible in "My Computer" but when you click on it it asks if I want to format it, worried about doing that. Can't find any instructions on resetting the iPod back to factory/out of the box WITHOUT ITUNES! that may help!
Thanks,
John

Ther is NO 7.6 for Windows 2K?
I'm afraid not. The last version of iTunes for Windows compatible with Windows 2000 was 7.3.2:
http://www.apple.com/support/downloads/itunes732forwindows2000.html
... and the third generation (video) nanos require at least iTunes 7.4.x (and 7.6 is currently recommended).

Cannot download itunes.....says there is a windows inslaller problem

ttried to update my iphone 4 to ios5.......needed to update itunes....tried came up with windows inslaller .........removed itunes, now cannot install due to same windows inslaller problem, any ideas peeps......its doin my head in!!!!!!

Are you using a 32-bit or 64-bit version of Windows, Jim?
If it's 64-bit (Vista or Windows 7), I'd try the following instructions:
Vista Home Premium (x64) and installing Itunes - SOLUTION

Oracle 11G Express Windows 64bit Version

I've seen the thread that states that a Windows 64bit 11G Express version is planned. Can someone at Oracle please provide an update as to when it will be available? Thanks

Hi ,
There is a known issue with Dbcontrol when try accessing the URL via Internet Explorer
Can you check by accessing the Dbcontrol URL via a different browser like Firefox or Chrome
Ref
Log in to Enterprise Manager Console using Internet Explorer 7 and higher fails with "Internet Explorer cannot display this page" or with Security Certificate Error (Doc ID 1498203.1)
If still an issue then check the status of Dbcontrol to ensure its working fine
SET ORACLE_HOME=<value>
SET ORACLE_SID=ORCL
SET ORACLE_UNQNAME=ORCL
cd %ORACLE_HOME%/bin
emctl stop dbconsole
emctl start dbconsole
emctl status dbconsole
Regards,
Rahul

Description: A problem caused this program to stop interacting with Windows. Problem signature: Problem Event Name: AppHangB1 Application Name: firefox.exe Application Version: 1.9.2.3855 Application Timestamp: 4c48d5ce Hang Signature: 9962

I am having this problem, in the first window when I try to do anything.
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangB1
Application Name: firefox.exe
Application Version: 1.9.2.3855
Application Timestamp: 4c48d5ce
Hang Signature: 9962
Hang Type: 0
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Hang Signature 1: 5df72ce88195c0212c542e9c8c172716
Additional Hang Signature 2: 2b94
Additional Hang Signature 3: 9acafbb8ad01bf9d2eb258d8fddad3ca
Additional Hang Signature 4: 9962
Additional Hang Signature 5: 5df72ce88195c0212c542e9c8c172716
Additional Hang Signature 6: 2b94
Additional Hang Signature 7: 9acafbb8ad01bf9d2eb258d8fddad3ca
== This happened ==
Every time Firefox opened
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

I suspect a RAM or hardware problem.

Hello, I'm surching to charge Version 2.1.1 from iCloud to Windows 64bite. Thanks a lot

Hello, I'm surching to charge Version 2.1.1 from iCloud to Windows 64bite. Thanks a lot

Hello Taleh,
Wer're just other users here trying to help other users, you'll have to contact Apple, maybe calmly ask to speak to a Customer representative, & see if they can help you.
Good luck & wishes.

Windows 7 64bit Problem

Similar Messages

Maybe you are looking for