Windows 7 64Bit Says Connecting Majic Mouse ... and nothing happens.
I'm trying to connect my majic mouse to windows 7 under boot camp on my macbook pro and after I locate the majic mouse and click connect for the magic mouse nothing happens. Is there a work around for this problem. I have tried rebooting windows and some other basic stuff and nothing happens!
if you can see the mouse in the bluetooth setup window in windows 7 then click on the icon and select properties. then click on the hardware tab and click install hardware and drivers i think. that usually connects the mouse shortly after and will remember the connection the next time you boot into windows 7.
Similar Messages
-
I reset my phone now no service and says connect to itunes and nothing happens
i reset my iphone4s and now it says connect to itunes and nothing happens have no service either
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems. Where can i download the ios5 from as my itunes is on my desktop which uses windows xp. Please help
Download iOS 5.1
iOS 5.1 (build 9B176) is compatible with iPad 1, iPad 2, iPhone 3GS, iPhone 4, iPhone 4S, iPod touch 3rd & 4th gen, and iPad 3. Additional builds are available for Apple TV 2 and Apple TV 3. The below download links are all direct downloads of iOS 5.1 from Apple.
iPad 1
iPad 2 Wi-Fi
iPad 2 GSM (AT&T)
iPad 2 CDMA (Verizon)
iPad 2,4
iPhone 3GS
iPhone 4 GSM (AT&T)
iPhone 4 CDMA (Verizon)
iPhone 4S
iPod touch 3G
iPod touch 4G
iPad 3 Wi-Fi
iPad 3 GSM
iPad 3 CDMA
Apple TV 2 (9B179b1)
Apple TV 3 (9B179b1)
Source: http://osxdaily.com/2012/03/07/ios-5-1-download/ -
i just updated my iphone to the latest update and my phone now has a picture of the connection cable with an arrow pointing to itunes. I plug it in and connect to itunes and nothing happens. HELP.
Hello JBH 1162
Check out the articles below to get your iPhone to show up in iTunes so it can be restored. Start with the first one to see if you can make any change to show up in iTunes and if it does not, then pick either the second or third article for the type of computer that you have.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Regards,
-Norm G. -
Premiere Elements 13 won't launch in Windows 8.1 (Click the icon and nothing happens)
I'm running the trial version of Premiere Elements 13 on Windows 8.1 64-bit. It's a brand new PC built for video editing. Everything worked perfectly for about a week and all of a sudden I'm unable to start the program. I click the icon and nothing happens. No splash screen, no error code, no spinning circle cursor.
I have the latest video card drivers for my graphics card.
I've tried uninstalling the program, removed every last Adobe file from my PC, uninstalled all instances of Microsoft Visual C++ and reinstalled Adobe Premiere Elements 13. I tried the same with a fresh download of the program. Neither worked.
I've tried installing a couple .dll files based on a similar thread (where a program called iLivid was the issue). I don't have iLivid on this PC and adding the new drivers didn't work.
For the few days that the software was working I loved it and was ready to purchase. Unfortunately I won't be able to buy it until I can get it to launch on my PC. Any help would be greatly appreciated.
Thanks!celebornx
My major problem was with the reliability of the uninstall reinstall of Premiere Elements 12 Windows. I did not encounter any issues in this regard with 11. And, I have only looked at the 30 day tryout of 13 from Adobe. My computers are Windows XP 32 bit, Windows 7 64 bit, Windows 8 and later 8.1 64 bit. The following describes what got me through the worse of these hassels.
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
I am not sure if the above will work for you with 13. But, it would be worthwhile to check them out.
Since you are dealing with current version 13, it might be a good idea to get Adobe via its Adobe Chat involved, with the hope of some remote control of your computer troubleshooting to try to get to the core of the issue. Chat Panels have been hard to come by for some of these issues, but let us try this route.
Please click on the following link
Contact Customer Care
Premiere Elements
Adobe ID and signing in
Adobe ID, sign in, and account help
Chat Panel
If the link does not hold its set, then you will need to navigate to the Chat Panel using the above titles as guides.
Depending on the outcome....if you purchased Premiere Elements 13 from Adobe direct within the last 30 days, you can request your
money back from Adobe. If you purchased elsewhere, then you are left to deal with the return policy of the seller.
We will be watching for further developments.
ATR -
Connect mini DV and nothing happens
i have a panasonic PV G150 mini DV recorder
connect to computer with USB and firewire and nothing happens
is there something else i can tryYou need to connect via FireWire only to import the miniDV recordings into iMovie. The USB connection is just for downloading stills from the camera.
So connect just the FireWire cable, otherwise you'll confuse things.
If the camcorder doesn't show up, or no Import screen starts up, you may have to connect the camcorder to mains electricity - via its mains charger/adaptor - instead of running it on its battery: several camcorders require mains juice in order to offload their video to a computer - this may be one of them (..I don't know for certain).
If it still doesn't show up, switch the camcorder to Play mode, and restart iMovie. iMovie should then recognise that video is coming down the FireWire cable, and should show its Import screen.
If nothing at all happens, try a different FireWire cable. The cable should, of course, look like this..
The larger end goes in your Mac, and the smaller end into the DV/FireWire/i.Link hole in the camcorder ..which looks like this: -
Iphone 4 wont start, says connect to itunes but nothing happens
Hi, i woke up this morning and my Iphone 4 was at only 27% charge and saying my phone needed to be rebooted in itunes. The moment i unplugged it, it completely shut off. When i plug it in to the computer nothing happens and it wont pop up on itunes or show any sign of power. When i plug it into the wall the apple logo comes up and stays for about 20 seconds than disappears for the same amount of time and repeats. I cant use the buttons to restart, already tried that.
Hi bendiezel,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen. Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Hope this helps ...
- Judy -
My sister has sent me a document to my mobile me email, it's looks like a Word doc as it just shows a big (W) in box, when I click on document to open it it says "open in Pages" so I click that and then nothing happens. I've waited for it to download completely but still nothing. Can anyone help please?
My sister has sent me a document to my mobile me email, it's looks like a Word doc as it just shows a big (W) in box, when I click on document to open it it says "open in Pages" so I click that and then nothing happens. I've waited for it to download completely but still nothing. Can anyone help please?
-
After installing OS 6, I chose the option to have my podcasts download automatically but nothing happens they just keep saying preparing to download. Is there a way to still manually download or is a fix coming?
Am I doing something wrong?
-
I've tried everything and nothing has worked, it's comepletley stuck. I have no idea what to do and have spent the past 2-3 hours trying to find a solution online.
What was the wording of the error message? The following gives the various error messages and their resolution.
iTunes: Specific update-and-restore error messages and advanced troubleshooting -
How can i get my ipod unlock. It says iPod is disabled connect to itunes, when i connect to itunes from my computer nothing changes on the ipod.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I can't update my Pages program it says it is installed and nothing happens?
I can not update my Pages it is saying it is installed but it isn't?
You have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Note: Apple has removed over 90 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter -
I keep getting a pop up on my iophone 5 that says "connect to itunes to use push notifications" I've connected to itunes and nothing happens. I cant use the phone as I can;t get the pop up to stop
So after exhausting countless hours I just added the App "Google Search". It's not as great of an interface but I can access Google Voice and keep tabs by just checking in every so often. Better than not having Google Voice at all.
-
Ever since I updated to the IOS 6, I no longer can play my music in the car! It is plug and play! It just sits there saying connecting and nothing happens. A couple of my friends have said the same thing. Any ideas? Help please!
Hello ..do you have a history on the phone? did you get it wet? was it dropped? have you been using an authentic ORIGINAL apple charging cable?
this problem occurs when there is a short circuit in the phone... you most likely got it wet at some point and maybe didnt even realize it? The moisture in the phone hasb probablly oxidized one or several capacitors, integrated chips thereby short circuiting the phone. that is why he phone is acting erratic because these short circuits inadvertently "activates" other circuits.. eventually the phone will not turn on anymore- the heat will stress the citcuit board and you will have discontinuity along your main power lines and the phone will cease to function..i see this alllll the time in our shop
the fact you upgraded to ios6 will even work the phone harder because its a more powerful operating system taking full advantage of the A4 chip.. -
when i connected my iphone 5s to itunes for the first time then a window appered saying your device timed out. whats happening and how do i connect my iphone
Hello Hema2003,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
Best of luck,
Mario
Maybe you are looking for
-
How do I place a label on page 1 of a pdf doc, for example, Exhibit "A"
I used to knew how to do this in version 10 but 11 has me stumped.
-
My udating Firefox failed and not I cannot access it
I tried updating Firefox on Tuesday and somehow it overloaded my Mac and now all I have is the Firefox symbol with a circle/slash through it and it does not function. I tried downloading SeaMonkey and have the same result. I know the two are related
-
I just recently got my ipod nano back from the service shop to be repaired for another issue and this time it is keeping the big blinking battery symbol with lightning bolt on the screen even when it's not actually plugged in to a power source. When
-
Can I use oracle9i to deploy the BC4J without using oracle9ias
I found many components in oralce 9i similar to those,for instance apache server, in oralce9i applcation server I want to know what defference is between oralce 9i and oralce9i applcation server
-
In production DB ,i wrongly imported production user to system user
Hi All, 1.In production DB ,i wrongly imported one user to system user. 2.And there is any method to retrieve the system user as back? 3.Is there any conflicts in future? thank you in advance, regards, Db.