Windows 7 64bits + Iphone + Socket 1156

Hello,
I have received today my iphone 3GS 32GB, But I have a problem!
I have a Windows 7 64 bits, Asus maximus III Formula (Socket 1156).
Itunes is installed correctly (and reinstalled), my old IPHONE 3G isn't recognized by the computer (Error :Ex08000065) so i can't put music on ect, and my iphone 3gs too! I can't even activate my Phone!
Is their a solution to this problem?
I have updated my bios to the last version, windows is updated and itunes is on the last version too!
Please help me!

todays update
It got worse before got better
I uninstalled and reinstalled Itunes a couple more times. I even tried to install a 32bit version since task manager shows Itunes 32*exe.
I finally gave in and restored Iphone to factory settings and then my iphone could only call 911 (emergency calls)
I try to connect again to restore it but it didn't work. I tried the DFU and got a error msg "error-message-0xe8000001"
I researched the error msg and found something about USB2.0. I went to HP site and downloaded an update for some drivers and voila
right now iphone is being synchronized
hopefully I won't have any problems with my contacts like I had last time
this happened to me

Similar Messages

My iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

my iphone doesn't conect with my computer. He says you can't use it you softwear is not up to date please uninstall itunes and install itunes for windows 64bit. I do that but it doesn't work. So what can i do?

It won't pass 10.3.
What does this mean?
I figured it out. Thanks!!!
What did you figure out? How about posting how you resolved it?

ITunes & Apple Mobile Device Driver Not Compatible w/ Windows 64bit Systems

In short, I spent over 2 hours on the phone tonight with Apple Support. The call was elevated to a software engineer. After several minutes he apologigized and state the Apple Mobile Device Driver is not compatible with Windows 64Bit systems.
Therefore I can't activate or do anything for that matter. I effectivly have a $600 paper weight. I asked the engineer if they have any intention fixing it and never received a direct response.
None of the documentation that I have found states 64bit Operating Systems are not supported. The support rep stated nor he or his collegues were unware the mobile device driver didn't support 64 bit OSs either. I consider this to be really misleading and a huge oversight on Apple's part.
I wrapped up the call by asking him how I go about returning the device without being struck by the 10% restocking fee. He didn't know.
Anyone have Steve's number? I sure would be nice to get at the minimum a full refund.
I just thought everyone else should know so you don't tie up support lines and waste your time trying to find a resolution.
Regards,
KSPad

OMG same thing here; rather annoyed and now have set up accounts on 2 comps(both 64 vista ultimate); about to try my 32 bit vista on my lappy; we'll see... i don;t have high hopes thoush.
What i knew about iPhone before buying it:
What You Need
To use iPhone, you need:
A new two-year wireless service plan with AT&T
A Mac or a PC with a USB 2.0 port and one of the following operating systems:
Mac OS X version10.4.10 or later
Windows XP Home or Professional with Service Pack 2 or later
Windows Vista Home Premium, Business, Enterprise, or Ultimate edition
iTunes 7.3 or later, available at www.itunes.com
An iTunes Store account
An Internet connection
You must be at least 18 years old to open a new AT&T wireless account. You will need a
major credit card to open a new iTunes Store account.
Yeahyeah check all that stuff;
Oh well; just when i thought i'd finally cross over to the beautiful packaging of APPLE. I remember in design school that form follows function. Thanks.
Windows Vista

Jabber for Windows and Iphone

We are running Jabber on cucm 9.1 WE use microsoft RDS and all works fine locally. users can sign in with their AD account and see their presence, use their deskphone and receive email. that works on both the windows and Iphone clients.
When they are logging in via a anyconnect VPN however. the im and presence shows no status for anyone, even though they are logged in but the phone and vociemail is fine, calls can be made and received. The ASA is not blocking anything so not sure where to start with this one

I just did a full deployment for jabber 4 windows iphone, ipad and android and to get my presence status working as well as photos shown and directory searches I had to make use of the BDI config in my jabber-config.xml file on the cucm as well as the UC services on the cucm and mine is working 100%.
That is all why I am asking.

Windows 64Bit Itunes Error : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR."

I have a brand new HP laptop windows 64bit that is having issues installing Itunes 10.6.3. Whenever attempting to install, I get the error message : "THERE IS A PROBLEM WITH THE WINDOWS INSTALLER PACKAGE. A PROGRAM REQUIRED FOR THIS INSTALL TO COMPLETE COULD NOT BE RUN CONTACT YOUR SUPPORT PERSONNEL OR PACKAGE VENDOR." I thought this was an issue with the new version, and attempted to retrieve/install older versions of Itunes and same issue occurs. I have tried other forums and resolution tips from : https://discussions.apple.com/docs/DOC-3551 and nothing still. It appears that apple installs bonjour and nothing else. I have tried extracting the itunes package and installing the executables seperately, but everytime the error stil arises. I cannot repair the apple software update as it cannot install from the error mentioned above. Looking through the logs, it shows error : 1721, problem with windows installer package.Does anyone have any suggestions on what to try?

There are so many different error and problems peopl are having.
This is a link to mine
https://discussions.apple.com/thread/3467825
I think it has to be something on Apples end.
Hopefully they fix it soon. Ive used a few GB redownloading and Im going crazy
hope this settles you a bit

I updated to itunes 11, uninstalled it according to directions, and re-installed itunes 10.7.021 for windows 64bit. Now Iget the message itunes library.itl cannot be read because it was created by an earlier version of itunes

I updated my computer to Itune 11, did not like it, and uninstalled it exactly according to directions. I re-installed Itune10.7.021 for Windows 64bit, but now I keep getting the message "The file itunes library.itl cannot be read because it was created by a newer version of itunes. How can I resolve this problem?

zepel has it, but perhaps some more detail will help.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.

MacBook Air intermittently has issues connecting to websites when wireless shows connected to the internet. The pages show that I am offline, but I can ping Google DNS. Windows PC, iPhone and Android phone have no issue displaying the same web pages.How do I solve this issue?

Go step by step and test.
1. Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204
2. Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
3. Deselect Proxies if selected.
    System Preference > Network > Advanced > Proxies Tab
    Under "Select Protocol", uncheck any box if selected.
    Click "OK" then "Apply”.

I am trying to get the music content on my Mac onto my iPhone. When I connect the devices, the computer does not seem to recognize the iPhone, i.e., on the open itunes window, the iPhone is not seen as a connected "device".

I am trying to get the music content in iTunes on my Mac onto my iPhone. When I connect the devices, the computer does not seen to recognize the iPhone. i.e., on the open iTunes window, the iPhone is not seen as a connected "device".

Hi,
See Here
iPhone, iPad, or iPod touch not appearing in iTunes
From Here
http://www.apple.com/support/itunes/devices/
Also...
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538

I have a serious contacts redundancy problem. First I have multiple email account formats, e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contact

I have a serious contacts redundancy problem.
First I have multiple email account formats,e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contacts for the same person.
I deleted the Entourage contacts as that seemed to be the program that was causing the problems. When I synced this morning, now all my contacts are gone from every where.
How can I restore to my last back? If I restore, it will ask to restore to the back that was just made… which has no contacts?
Help would be greatly appreciated !!

I have a serious contacts redundancy problem.
First I have multiple email account formats,e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contacts for the same person.
I deleted the Entourage contacts as that seemed to be the program that was causing the problems. When I synced this morning, now all my contacts are gone from every where.
How can I restore to my last back? If I restore, it will ask to restore to the back that was just made… which has no contacts?
Help would be greatly appreciated !!

Does anyone know how to turn of the pop-up iCloud log-in window on iPhone. I have no desire to use iCloud. I have turned off iCloud in settings but the pesky little critter is not deterred.

Does anyone know how to turn off the pop-up iCloud log-in window on iPhone 5c. I have no desire to use iCloud. I have turned off iCloud in settings but that does not seem to deter the pesky little pop-up from continually asking me to log-in
Thanks

Pop up usually meant that icloud activation lock is still on on Apple servers. In order to deactivate you need to turn icloud back on by signing in and then sign out properly. For your sake I hope that you know the password.

Install oracle 10g (32bits) on windows (64bits)

hi,
Have anyone tried installing oracle10g 32bits on windows 64bits platform before? Will it cause any problems and what are the drawbacks?
Thanks

hi,
Have anyone tried installing oracle10g 32bits on windows 64bits platform before? Will it cause any problems and what are the drawbacks?
Thanks

HT4352 appletv - the airplay window on iphone 4gs and ipad gen2 does not show the mirroring slider? any one know what im doing wrong?

appletv - the airplay window on iphone 4gs and ipad gen2 does not show the mirroring slider? any one know what im doing wrong?

ccooper52
check out the tips and video at the bottom of this link and see if any of it helps
http://www.allabouthomeelectronics.com/apple-tv-airplay.html
Apple policy requires we mention we might benefit or profit somehow by your visit
please let us know if this helped

Oracle 11G Express Windows 64bit Version

I've seen the thread that states that a Windows 64bit 11G Express version is planned. Can someone at Oracle please provide an update as to when it will be available? Thanks

Hi ,
There is a known issue with Dbcontrol when try accessing the URL via Internet Explorer
Can you check by accessing the Dbcontrol URL via a different browser like Firefox or Chrome
Ref
Log in to Enterprise Manager Console using Internet Explorer 7 and higher fails with "Internet Explorer cannot display this page" or with Security Certificate Error (Doc ID 1498203.1)
If still an issue then check the status of Dbcontrol to ensure its working fine
SET ORACLE_HOME=<value>
SET ORACLE_SID=ORCL
SET ORACLE_UNQNAME=ORCL
cd %ORACLE_HOME%/bin
emctl stop dbconsole
emctl start dbconsole
emctl status dbconsole
Regards,
Rahul

Hello, I'm surching to charge Version 2.1.1 from iCloud to Windows 64bite. Thanks a lot

Hello, I'm surching to charge Version 2.1.1 from iCloud to Windows 64bite. Thanks a lot

Hello Taleh,
Wer're just other users here trying to help other users, you'll have to contact Apple, maybe calmly ask to speak to a Customer representative, & see if they can help you.
Good luck & wishes.

TS3212 How i can download iTunes for Windows 64Bit if I have downloading this through Linux Ubuntu?

How i can download iTunes for Windows 64Bit if I have downloading this through Linux Ubuntu?

Thank you for you answer, but it isn't heart of the problem. The problem is that I don't have choose iTunes version manually, it's happens automatically, and start downloading iTunes for Windows 32-bit.

Windows 7 64bits + Iphone + Socket 1156

Similar Messages

Maybe you are looking for