Windows 7 802.1x (Wired) Authentication Failure when logging into Lync 2010

Hi
My company has implemented 802.1x Wired authentication, we use GPO to specify a
Wired Profile that uses a COMPUTER certificate.
We are finding that when a Windows 7 laptop comes out of sleep or hibernation, the laptop fails 802.1x authentication and does not connect to the network.
This issue only occurs intermittently, but have been proven to occur only when Lync 2010 is open. If we close Lync 2010 the issue does not occur. Lync 2010 installs a self signed USER certificate for authentication.
I am aware that there are some issues around Windows 7 not selecting the correct certificate when responding to authentication requests (KB2710995,
KB2769121) but these always specify that the issue occurs when 802.1x authentication uses USER certificates, not a mix of USER and COMPUTER. We have installed these hotfixes and the
issue still occurs.

Hi,
From the description, you suspect the DHCP request cause this issue. Would you please send us the packets? Since it seems that you have looked into the traffic and found some clues.
Meanwhile, I found the following hotfix which may related to this issue.
No response to 802.1X authentication requests after authentication fails on a computer that is running Windows 7 or Windows Server 2008 R2 http://support.microsoft.com/kb/980295/en-us
Next Action Plan:
1.Clean Boot
a. Click Start, click Run, type "msconfig" (without the quotation marks) in the Open box, and then click OK.
b. In the Startup tab, click the "Disable All" button.
c. In the Services tab, check the "Hide All Microsoft Services" checkbox, and then click the "Disable All" button.
======================================================
Clean Boot + binary search
In a Clean Boot, all the 3rd party services and startup programs are disabled. If the server can start normally in Clean Boot, we can be sure that the issue was caused by some 3rd party service or application. And then we can do a "binary search".
You can enable half of all the services in Services tab, and then restart the server to check the result. If the issue reoccurs, it means the culprit is in this list; if not, the culprit is in the other half. And then, we can continue the binary search, until
we find out the root cause. Please let me know if this action plan is OK for you.
2.Collect etl trace on the problematic client.
netsh trace start capture=yes overwrite=yes tracefile=c:\net.etl filemode=circular
****Try to reproduce this issue****
netsh trace stop
Please send the net.etl to us for underlying analysis.
For any concerns, please let us know.
Best regards,
Steven Song
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

I have Lightroom 6 (not CC) on a Windows machine. I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into m

I have Lightroom 6 (not CC) on a Windows machine. I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into my Adobe account...AGAIN! And then to further add insult to injury, I'm prompted to enter in the license number of my product. I've gone through this process a dozen times now...SCREAM!!!

Paulou12 what type of a Creative Cloud Membership do you have? You can find details on how to update Lightroom using the Creative Cloud Desktop application at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
Finally if you are in a managed environment then please work with your I.T. department to apply the update.

Blue screen when logging into windows server 2008 r2

when logging into windows server 2008 r2, all I have is a blue screen and the mouse.
I tried looking for solutions on the internet, then I found a microsoft hotfix "http://support.microsoft.com/kb/2590550" I run the hotfix in command line but it gave me nothing, no error or success messages.
I tried to reboot but I still have the same problem.
Is there any solution to this problem ??

Hi,
Thank you for posting in Windows Server Forum.
Did you face this issue during remote session or console session?
In addition, have you try to change or install any driver\software which cause this problem?
Have you use any debugging tools from Microsoft to find respective error cause?
You can refer following article for memory dump.
How to read the small memory dump file that is created by Windows if a crash occurs
http://support.microsoft.com/kb/315263/en-us
Hope it helps!
Thanks.
Dharmesh Solanki

How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747

802.1x wired authentication via PEAP, MD5

Hi everyone,
Thank you for taking the time for reading this, I am implementing a security solution and wanted to take th benefit of implementing 802.1x over wire. I have been searching a bit but no much info from start to finish on how to implementing this solution,
i would really appreciate if someone could point me some where to find detailed instruction on how to do this, as so far i have been configuring in multiple way bit no result out of it. Still a orange port color on my switch, that means the first
hop of security work but the next no.
Thank you in advance to read this.

Hi,
According to your description, my understanding is that you want to deploy 802.1x wired authentication via PEAP, MD5 and need instructions about this.
Some articles and just for your reference:
802.1X Authenticated Wired Access Overview
https://technet.microsoft.com/en-us/library/hh831831.aspx
802.1X Authenticated Wired Access Design Guide
https://technet.microsoft.com/library/dd378864(WS.10).aspx
IEEE 802.1X Wired Authentication
https://technet.microsoft.com/en-us/magazine/2008.02.cableguy.aspx
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do I delete ..when logging into my email.. it populates my entire email address .. how do I stop this ?

how do I delete.. when logging into my email.. it populates my entire email address.. how do I stop this ?????

Hi Roam.
Message understood.
I managed to delete me and substitute her as Administrator. Thanks.
you ask what machine I am now using, I am a Windows man, currently using XP Pro SP3 and have been for 10 years. A friend from the Education Dept gave me a phased out Mac with OS X in an endeavor to convert me.
At first I was very impressed but as time went on I found that the Mac was not as user friendly as I had thought. The terminology was foreign to me, and where Windows placed thing automatically into place, with Mac I had to physically pick up and re-locate programs.
But what really turned me off was that nearly every thing that I wanted to do I had to go to the net and try and find drivers or whatever to overcome my problems.
A point in question, I purchased an external USB dual layer DVD burner. When connected to XP, it was recognized instantly and within a few minutes I as up and going. With the Mac, it is not even recognized let alone getting it to work!
And then there are all the other little things like printing. In windows every thing from every page I can print, Ctrl + P. With the Mac, I am still trying to find out how to print a page from the Help menu.
Enough said. My daughter is interested and that is all that counts. Let her work it all out, she is smarter (an younger) than me.
Regards

How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID promts the previously used email user IDs... Want to disable this feature---How can ot be done ?

Question
How to disable the previously entered user ID's that automatically appear. For example ; when logging into email , first letter of user ID prompts the previously used email user IDs... Want to disable this feature---How can it be done ?

*Click the (empty) input field on the web page to open the drop down list
*Highlight an entry in the drop down list
*Press the Delete key (on Mac: Shift+Delete) to remove it.
*http://kb.mozillazine.org/Deleting_autocomplete_entries
* Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
* Tools > Options > Privacy > History: "Remember search and form history"
* https://support.mozilla.com/kb/Remembering+passwords
* https://support.mozilla.com/kb/Form+autocomplete

When logging into iCloud in Safari, Calendar doesn't display any events. They are displayed on the iPad, iPhone on even the iCal. What is wrong ?

When logging into iCloud in Safari, Calendar doesn't display any events. They are displayed on the iPad, iPhone on even the iCal. What is wrong ?

:S,
Sorry, missed that fact. My memory is good, but short.
Try moving the "Calendar Cache" file to your Desktop. Quit iCal, and find the "Calendar Cache" file in your Macintosh HD/Users/yourusername/Library/Calendars. Move that file to your Desktop. After that, (I remember that I recommended this before), as long as you are moving files to the Desktop, repeat the plist removal procedure once again, log out/in or restart.
You should also consider removing the "To Do's" from Mail before restarting iCal. When you open iCal turn off "Show Birthdays calendar" in iCal>Preferences...>General.
Are you syncing any data? If so, what method(s) are you using?
;~)

When logging into my work webmail, my mac displays tons of blue boxes with question marks in them

when logging into my work webmail, my mac displays tons of blue question marks - can anybody help?

Is it happening only with that one site?

For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent problems when logging into some websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop compuHelp

For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent problems when logging into some websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop computer. The wifi unit is a iinet BOB 2 unit. The other computer works completely fine. The only problem is with this apple iPad? I have rebooted iPad and rebooted BOB 2 wifi unit but this has made on difference to the problem?
Can anyone suggest any HELP
Thank You

For the last 2days I have had the words " No Service" in the top left hand corner of my iPad? This causes intermittent problems when logging into some websites and Downloading some emails? I currently run a wifi network of 1 iPad and 1 desktop computer. The wifi unit is a iinet BOB 2 unit. The other computer works completely fine. The only problem is with this apple iPad? I have rebooted iPad and rebooted BOB 2 wifi unit but this has made on difference to the problem?
Can anyone suggest any HELP
Thank You

Regarding no party no technical system, or anything when log into IR

Hi all:
Technical systems(ABAP type) and business systems(ABAP type) have been created in SLD, however when log into Integration Repository, there is nothing on object Panel, no technical system or party , totally empty, could you please tell me how to import or the possible reason for this ?
Thanks in advance!!!

HI Sony,
Can you confirm r u in the Integration Directory or in Integration Repository??
You can not find the Business System and Party in IR.
If you are in ID you need to create the Scenarion and then you can get the party, servicewithoutpary,receiver determination, Interface determination, sender agreement and receiver agreement.
Now you can assign the Business systems from the SLD to the Business System under servicewithoutparty-> Business Systems.
YOu cannot findout the Technical Systems in the ID also.
Regards
Sridhar Goli

Get message "You have requested an encrypted page that contains some unencrypted info that can be ready by 3rd party, etc." when logging into AOL. What is this?

Message occurs when logging into AOL. Lock at bottom of page has a red line through it. I'll close out and attempt to sign-in again. Sometimes it is cleared and sometimes I get the message again.

I would not trust that on a banking site. If it were just a forum, no problem, but anything unencrypted during banking is suspicious.

Cannot download OSX Maverick? My current system is Snow Leopard 10.6.8 and even when logged into the app store I'm getting the message that I can not download at this time. Try Later?

Cannot download OSX Maverick? My current system is Snow Leopard 10.6.8 and even when logged into the app store I'm getting the message that I can not download at this time. Try Later?

Are you connected via wifi? If so, and it is an option, try connecting using a ethernet cable. It sometimes seems to help as it can give a more reliable connection for the 5.3gb download.
If you do manage to download it you may want to make a copy of the installer file - which gets downloaded to the Applications folder - before running it as it self-deletes on successful installation. It may save you another monster download in the future.

Error 5002 When Logging Into iTunes Store

A few years back, I had a different email and a different AppleID; I still listen to the music that I purchased under that account, and I need to authorize my laptop now. When I tried to log in (I verified that the password is correct), I get this error:
"We could not complete you iTunes Store request. An unknown error occurred (5002)"
However, it doesn't happen when logging into my current iTunes account, or my husband's.
Anyone else have this issue? Should I just try to contact Apple Support directly to resolve?

I'm also getting this error. The only thing that is different is that I synced my iPhone to my MBP after several weeks.
I tried updating one of my free iPhone apps but I was told there was an error in downloading the information. I figured it was because I had moved and changed my address for my credit card but had not updated it on my iTunes account. When trying to go into my account through iTunes I got the Error 5002... I guess I'm not the only person to have this problem.
Any help would be great.

After changing my user id my iPad still brings up my old id when logging into the App Store. How do I fix this?

After changing my user id my iPad still brings up my old id when logging into the App Store. How do I fix this?

Did you change the ID in Settings>iTunes & App Store (on the iPad) also?
Note that any items purchased with your old ID are permanently tied to it and cannot be transferred to the new one.
~Lyssa

Windows 7 802.1x (Wired) Authentication Failure when logging into Lync 2010

Similar Messages

Maybe you are looking for