Windows 7 "a patch is preventing the system from starting" error code 0x490

I have a Windows 7 machine.
It was working fine.
Now it will not boot.
When I try system repair, it says:
Root cause found
A patch is preventing the system from starting.
Repair action: System file integrity cheack and repair
Result: Failed. Error code 0x490
I have tried doing safe mode, last known good configuration etc and nothing works
Also, I tried to restore to an early checkpoint, but it claims that none exist, even thought I know we save restore points.
Please advise?

"I suggest running Command Prompt from the repair menu and then Check Disk:
1. Insert the Windows 7 Disc and boot from it.
2. In the recovery menu, choose Command Prompt .
3. Type the following command and press Enter:
Chkdsk /r /f
Please also try the following commands and press Enter at the end of each line:
Ren C:\Windows\winsxs\pending.xml pending.old
Ren C:\windows\SoftwareDistribution SDOLD
Regedit.exe
When the register editor opens, please navigate to the following key:
HKEY_LOCAL_MACHINE\COMPONENTS:
* High light the COMPONENTS key. Please check if the following values exist in the right pane:
AdvancedInstallersNeedResolving
PendingXmlIdentifier
* If so, please right click on them and choose Delete them. Confirm the operation.
* Restart the computer."
Quote from : Vivian Xing
http://social.technet.microsoft.com/Forums/en/w7itproinstall/thread/227bcd32-f0dd-4aab-942e-07e0cadec083

Similar Messages

Windows 7 Ultimate (64-bit) Create a System Image Failure (error code: 0x80780119)

Hello,
I recently bought a new 1 TB hard drive, and I want to move everything from my original 250 GB to the new one. I have read from numerous sources that Creating a System Image through Windows 7, and then restoring that system image using the Windows 7 OS disc,
is the safest way to do so. My problem lies in creating the system image. I have looked up the error code and found that the usual problem is not having enough space, specifically on the System Reserved partition of the drive.
On the original 250 GB hard drive, the C: partition has 45 GB of free space, while the System Reserved partition has 69 MB of free space. On the new 1 TB hard drive, the only partition has 747 GB of free space (this is because I was originally going to manually
move only certain files, such as games, but halfway I decided that I want to move everything over).
On the 250 GB hard drive, the main partition that houses the OS and my other files is, as I said above, labeled C:. The System Reserved partition, also on the 250 GB hard drive is labeled G:. The only partition on the new 1 TB hard drive is labeled F:.
From what I can tell, based on similar questions and their responses as well as the information given from the system image error, I should be able to create the system image without any problems. When I try to create the image (I check the boxes for both
partitions, C: and G: when asked what drives to create an image of), I receive the same error code, 0x80780119, along with the message about not having enough space on one of the volumes.
I'm all out of ideas, so any help would be greatly appreciated.
Thank you for your help,
Joshua Ratliff

Hi,
Regarding this issue, try to refer to the following articles which would give you some hints:
Windows 7 Ultimate 64 bit backup failed (0x80780119)
Windows 7 RC Backup fails - Errorcode 0x81000019
Hope it helps.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How do i prevent the system from keeping what u type - username, sites, etc. on search box, i just type the first letter and it comes up immediately; even my username!

When I go to a search box, i type in the first letter and the whole word comes up.
I type in the first letter of the username and the whole word comes up.
I just type anything and the next time i log, it remembers the whole word.
Please take this out of my system. I do not want it to work this way. I want all memory to be gone.

I'm starting to come to this conclusion myself, actually... though, how mom managed to do this on accident without mucking about in terminals or anything more than just a cursory knowledge of the OS X system configurations (behind the scenes), I don't know : |
... on the other hand, her and I tend to be the exceptions to a lot of rules : |
I downloaded and installed TinkerTool, even though it supposedly doesn't work past 10.5.8, in the hoopes that, what it displayed (regardless of what it could change) would be correct as far as my "System" and "System (Headlines)" font settings were (see attached screenshot of the font section of TinkerTool for my system--not mom's).
I've instructed her to install and run the utility (but not to change anything) and then send me a screenshot of the "Fonts" section so I can compare it to my own. If there's something different on her system, since TinkerTool should work on hers, we may be able to fix it that way... though it would, frustratingly enough, remain a mystery to all concerned as to how she managed to stumble upon this in the first place : |
Anyway, I'm still hard at work on it... hopefully others are too and will share what they discover (if anything).

Prevent browser session from starting

I've automated the installation of a workstation using SCCM. One of the applications that is installed during this process, automatically starts an IE browser session when it's done.
Is there a way to prevent the browser from starting? I tried to kill the process after it started using taskkill.exe in a script. It kills the proces, but when i start the browser after that, it generates the message that the browser hasn't been closed correctly
the last time.
If i can't prevent it, is there a way to close the browser in a correct way?

Hi,
It seems that Internet Explorer service runs at Logon. You can use msconfig.exe to check if it's enabled under Startup and Services.
Also, you can see if it will execute during Logon with autoruns.exe.
Here is an article which may help you.
http://support.microsoft.com/kb/2837026
To kill iexplorer process, you can run such command:
Get-Process iexplore | Foreach-Object { $_.CloseMainWindow() }
Andy Altmann
TechNet Community Support

Trying to install an upgrade but Error 7 is preventing the install from going thru. I am logged on as Administrator running windows 8.1 on my pc. Help

Trying to install an upgrade of iTunes on my pc but Error 7 (Windows 193) is preventing the install from going thru. I am logged on as Administrator running windows 8.1 on my pc. I have repaired and uninstalled a couple times These are my warnings
"Service 'Apple Mobile Device Service' ('Apples Mobile Device Service) failed to start. Verify that you have sufficient privilege to start system services." [Abort Retry Ignore ]. "ItunesHelper was not installed correctly "

If the above steps haven't helped try installing:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for a 32-bit core program, similar to previous 64-bit releases of iTunes, or roll back to:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
as appropriate.
tt2

Can anyone tell me if PSE7 is compatable on Windows Vista 64bit? I'm trying to prevent my system from continually crashing.

Can anyone tell me if PSE7 is compatable with Windows Vista 64bit? I'm trying to prevent my system from continually crashing.

This has been answered many times before, but my 2 cts for what it is worth...
I have a new PC with Vista Home Premium 64 bit, 6 GB memory, two disks, quad processor, MS Office Small Business, etc. I made a backup on my old machine to a USB disk of my 40 GB of pictures managed with PSE-7. I then installed PCE-7 on the new 64 bit machine and did a restore of the pictures. All worked first time without the slightest problem. I also installed much other software also without doing anything special concerning the 64 bits and without any problems.
Two other points possibly of interest:
- One can deal with iTunes loosing access to playlist items by exporting the playlists into an XML file and making a global edit of the file path names if the data strutcture on the new machine is different. One then imports the corrected XML.
- I bought a 2560*1600 30 inch NEC display and viewing good-quality digital pictues is amazing. The first time I have found an output device with resolution better than a tiny fraction of what is in the picture files. Colours are also excellent.
David M.

I have been trying to work on my homework all afternoon, via NAU's blackboard system. I am continuously getting booted out of the system, with an error stating "Data execution prevention". How can I prevent this from continuing?

I have been trying to work on my homework all afternoon, via NAU's blackboard system. I am continuously getting booted out of the system, with an error stating "Data execution prevention". How can I prevent this from continuing?

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

I'm using "window.open()" to show one Calendar in a popup window. I can see that the popup is re-sizable. How can I prevent the user from re-sizing the popup?

I'm using "window.open()" to show one Calendar in a popup window. I can see that the popup is re-sizable. How can I prevent the user from re-sizing the popup? I have tried "resizable=yes|no|1|0" and that seems to be not working.

You can't prevent users from resizing a pop-up.
*https://developer.mozilla.org/en-US/docs/Web/API/window.open

I don't want to have to click the allow button every 3 seconds uploading video, how do I disable the "firefox prevented the page from reloading" when I've already put the site on my exceptions list?

I begin uploading video to Facebook and a small window opens to show the progress bar but, the video stops uploading about every 5% when a notification comes from the top bar stating: "Firefox prevented the page from reloading" with an Allow button on the right. Regardless of clicking the allow button and putting Facebook in every exception list Firefox options seems to have or even turning pop up blockers off, that dam button keeps coming! How do I prevent or disable this?
I am running windows XP media center edition SP2, and have Firefox v3.6.11

You're welcome

HT1277 my mail will not open after I click on mail.when I try to shut down my laptop ,it wouldn't telling that mail is preventing the computer from shutting down,asking to quit Mail and when I do mail dose not quit

my mail will not open after I click on mail.when I try to shut down my laptop ,it wouldn't telling that mail is preventing the computer from shutting down,asking to quit Mail and when I do mail dose not quit

Mail is open but it is frozen, being this the reason why you cannot open the Mail window. Press Alt, Command and Esc keys or go to  > Force Quit, select Mail and force quit it. Finally, you will be able to turn off or restart the MacBook

Is there a way for preventing the placeholder from appearing if there is not content for it?

I am creating a structure with tags and place holders. However, not all my entries have all the same information. For example, my first entry has a 3 line address (123 West Street, Suit 23, Lincoln NE 68521) but my second entry only has 2 line address (456 North Street, Lincoln NE 68521). When imported into my structure, the second address reads 456 North Street, <address2>, Lincoln NE 68521. My question for you is, is there a way for preventing the placeholder from appearing if there is not content for it?

IJWAA,
A work-around if you don't already use XSLT (to avoid having to) is to not have placeholder text, just use empty tags in your text layout that correspond to your incoming XML structure (any unused by the incoming structure IN ORDER, will be skipped). So long as you don't mind the blank line (rather than left over placeholder copy).
If you had placeholder copy in your text box (<address2> for example) look at it using the story editor window (edit > edit in story editor, or command-y/control-y) so you can see the surrounding tags... style the surrounding tags by selecting them with the cursor and applying character or paragraph styles (with text in between the tags at the time) and then delete only the placeholder text from the middle of the sandwich, leaving the tags in tact. Trying to do this without being in the story editor will not work.
Also, when importing the XML, I believe you'll still need to use "merge content" and "don't import empty white space" as you have been in order to replace placeholder text in any areas you had it.
For situations when you have a mixture of dynamic and static text in the same text block and you are merging data (more so when the placeholder text has been deleted as I've suggested above but the dynamic tags for the possible incoming text are still there), you can use a tag you've created (I call mine "staticText") in your layout to wrap ANY bits of text you don't want to accidentally delete when the surrounding tags get populated or not, using the merge option upon importing your XML. Just be sure never to use "staticText" as an actual tag in your structure or surrounding incoming data. The text contained within staticText tags in your layout will be ignored by incoming data, and won't accidentally get deleted when it's sandwiched between two sets of tags that are dynamically populated when merge content is the import option.
In my example below I'm using brackets/carats with the tag name instead of the color coded tag icon you see in the story editor, also I've used LB here to indicate a regular line break in Indesign and SP a regular space character in indesign:
[staticText>Name:<staticText][firstName>Abc<firstName][staticText>SP<staticText][lastName>Xyz<firstName][staticText>LB<staticText]
[staticText>Address:<staticText][address1><address1][staticText>LB<staticText]
[address2><address2][staticText>LB<staticText]
all other tags on following lines...
This should just leave a blank line for address2 when no data comes in for it. I'm assuming you have line breaks, if not, all the better.

App-v 4.6 The system cannot find the path specified. Error code: 4625DD4-07D0082C-00000003

Below is our environment,
App-v 4.6 SP2 Client installed on Windows Server 2008 R2 and managed with SCCM 2012 R2.
This server is part of Terminal Server Farm which contains two members.
Only one user is getting the error when launching one application. It doesn't happen when he launches other applications
The system cannot find the path specified.
Error code: 4625DD4-07D0082C-00000003
corrupt cp file detected ('Q:\AppName\osguard.cp'). osguard cp file, NO CORRECTIVE ACTION TAKEN
I have renamed the Application's userdata in both roaming and local appdata.
I have researched quite a bit about this and haven't anything solid. Most of the discussions suggest to clear the .fsd file and let the whole app layer re installed.
I am hesitant to do that as this is happening for only one user and for particular app.

you can try to 'repair' the application: Ask the user to close all applications of that package, then use the App-V client MMC (sftcmc.msc) to locate the application entry. Right-click and 'repair'. This has to be done in the user's context/session
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

How do i prevent the user from entering a RETURN/ENTER key into their username?

Hello,
i am currently trying to make a login system where the
username will obviously enter their username.
I have made my user input box editable and set up variables
to accept the user input and store them into variables, along with
error prevention for blank fields.
However i cannot prevent the user from hitting the
"enter"/"return" key. When i hit "enter" the user input box box
gets larger as the type curser moves onto the next line and when
the username is stored in a variable it is stored as "theuser
RETURN" so when variable is passed to the next frame and is
recalled by another text box to display the username, the user name
has a carriage return.
I want to prevent this, anyone got any suggestions? or know
of any websites i can visit which will explain this to me nicely??
Thank you

suggestion:
don't make the edit field editable right from the start.
rather attach a behaviour to the field/text-sprite like:
property mySprite, myMember
on beginsprite me
Sprite = me.spritenum
-- this is the channel-number of the editbox
myMember = mySprite.member.number
-- this is the field/text-member
member(myMember).editable = FALSE
end beginsprite
on mouseup me
-- when i get clicked for editing, then set me editable
member(mymember).editable = TRUE
the keydownscript = "MyKeyhandler"
-- this sets the keyhandler to YOUR keyhandler, see below
end mouseup
You would then need to have YOUR keyhandler in any mociesript
and there you
would block any unwished key, while editing
on MyKeyhandler
case the key of
RETURN:
stopevent;
otherwise
pass;
end case
end MyKeyhandler
in the end you would attach a behaviour to any
"Submit"-button (this is the
one that "gets" the userinput" and performs further action
according to your
wishes and decisions)
on mouseup
the keydownscript = EMPTY
-- this resets to normal
user-ID = member("Whatever the number or name of your
editfield
is").text
member("Whatever the number or name of your editfield
is").editable
= FALSE
-- any further actions to make in your project
-- to get along with the entered User-ID
end mouseup
something like this, I guess
Peter

Preventing the User from going back to the main page after logging out.

Hi all,
In my project I want to prevent the User from going back to the Main page, by clicking the back button of the browser, after the user has loggged out.I had invalidated the session so the user will not be able to do any operations, but he can vew the infos. I want to redirect to the login page if the user tries to go back using the back button after he has logged out.
I tried the same in this forum after loging out. Surprisingly it is the same. I can browse through all the operations i did even after logging out from here.
Is it not possible to do that in Servlets?Could somebody help?
Thanks,
Zach.

Hi,
You can use a servlet filter to do this , as it can interceptany request to your application you can decide to allow user access or not to any page/servlet.
public class Test implements Filter{
     public void destroy() {
     public void doFilter(ServletRequest arg0, ServletResponse arg1, FilterChain arg2) throws IOException,
               ServletException {
          System.out.println("filter");
          HttpServletRequest request = (HttpServletRequest) arg0;
          if(!request.getRequestURI().contains("index")){ // set condition that will be checked to verify if the user is logged in
               System.out.println("redirecting ... ");
               RequestDispatcher d = arg0.getRequestDispatcher("/index.jsp");
               d.forward(arg0, arg1);
          arg2.doFilter(arg0, arg1);
     public void init(FilterConfig arg0) throws ServletException {
}in you web.xml add :
<filter>
          <filter-name>test</filter-name>
          <filter-class>test.Test</filter-class>
     </filter>
     <filter-mapping>
          <filter-name>test</filter-name>
          <url-pattern>/*</url-pattern>
     </filter-mapping>

How do you prevent the computer from shutting down when in sleep mode?

How do you prevent the computer from shutting down when in sleep mode and plugged in?

Thanks tjk.
Those are great suggestions and got me looking in places I had not considered before. Unfortunately, the problem remains. The System Preferences did not have the shut down option activated and there are no parental controls active on the computer.
Any other suggestions are welcome.
Brian

Windows 7 "a patch is preventing the system from starting" error code 0x490

Similar Messages

Maybe you are looking for