Windows 7 and 64 bit CS4

When I installed CS4 on my Windows 7 Laptop, it installed both a "regular" version of CS4 and a 64 bit version. When I open Bridge, slecect a photo and open it, it opens in the 64 bit version. I always forget this and attempt to run either an onOne or Imagenomic plugin and they are not visible because I am in 64 bit. My workaround is to save the photo with whatever ACR changes I made. Close CS4, Open the non 64 bit CS4 and then run my plugin.
Isn't there a better way?
What is the benefit of this 64 bit version? I seem to remember reading that the 64 bit version allows utilization of all of mu RAM?
Can I make the non 64 bit my default for opening RAW files?
I assume, with the launch of CS5, that onOne, Imagenomic and others will produce a 64 bit version.
And on a semi-related note, but on my desktop machine, I have been having issues with onOne plugin's misbehaving. Memory errors, crashing etc etc. I posted a comment to the onOne forum about this and the bottom line is:
"I am running XP on a machine with 4 gb of RAM. Performance settings in CS4 show 1682 mb of available RAM, Let Photoshop use 1194 mb's. I have almost 700 gb's of available space on my hard drive. History States are 20 and Cache Levels are 4. Doesn't it seem like I have enough horsepower to run onOne smoothly and without issues?"
They responded: "Unfortunately, you don't have much memory available and this will definitely affect performance and stability within Photoshop. It would help working with only one open image at a time as well."
Do I have what's deemed to be low memory?
Bob

Thanks Curt, I will make the change to 32 bit on my laptop.
I cannot get available memory to anything higher than1682 right? That's a limitation of Windows XP?
With having my settings at 72%, am I potentially starving onOne of needed memory? I thought CS4 and onOne  were "sharing" the 1194 and the other couple of gb (I have 4 gb of RAM)  would be used by other Windows programs?

Similar Messages

  • Is it possible to exchange Windows 7  64 bits CS4 CD and CS6 Upgrade CD to th corresponding MAC CD

    Is it possible to exchange Windows CD for CS4 and Upgrade to CS6 to the 2 corresponding Mac CD?
    I am shifting from windows PC to a MAC.

    It was certainly the case previously. Hereunder, there is a copy of my Order
    Adobe Photoshop CS6
    €273,88
    Upgrade, Windows, French, Ship the box to me
    Quantité : 1
    Could you explain me how I can proceed to get the MAC CD(or, if not possible, to download the softwares ?
    Thanks in advance.
    Regards.
    Robert Claveyrolas

  • I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work.

    I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.

    Check out this thread:
    https://discussions.apple.com/thread/3677426?start=0&tstart=0

  • I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to my TV. I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my Den.

    I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

    I'm using Windows 7 64 bit. I downloaded iTunes for Windows and setup an account. How do I stream a TV show to the TV in my bedroom? I have a Belkin router. My TV has many site Icons, e.g. Netflix, hula etc. from which I can download and watch movies in my bedroom. But the iTunes icon doesn't appear?

  • OSB 10gR3 and ODSI 10gR3 for Windows 64-bit

    Hi,
    I'm looking for Oracle Service Bus 10gR3 and Oracle Data Service Integrator 10gR3 installables for Windows 64-bit. However, I saw the available versions on download section are only for indows 32-bit. I'm using win 64-bit to detect 4BG RAM or more which is not possible in win 32-bit.
    Can anybody help me wheather compatable version are available or is there any solution for that?
    Thanks in advance,
    Ganesh

    There doesn't seem to be 64bit version of OSB at all for Windows. [http://download.oracle.com/docs/cd/E13196_01/platform/suppconfigs/configs_al10gr3/osb10gr3/overview.html]

  • Using windows 8.1 and photoshop cs4 the font size of the MENUS is so small as to be almost unreadable.  how do i make the menu fonts larger.  this is happening also with bridge

    Using windows 8.1 and photoshop cs4 the font size of the MENUS is so small as to be almost unreadable.  how do i make the menu fonts larger.  this is happening also with bridge

    Thank you so much.  You are absolutely right.  I will have to reduce the screen density when I work with those programs.
    Thanks for your trouble and regards
    Quentin Sussman
    <mailto:[email protected]> [email protected]
    Cell: 082 4900 124
    Home:  011 883 2582
    Fax: 086 680 7981

  • Hello, I own a license for Adobe CS5 Production Premium and Adobe CS4 Design Premium for Windows/PC. I am switching to an OSX/MAC system. Is it possible to transfer my licenses to the new platform?

    Hello, I own a license for Adobe CS5 Production Premium and Adobe CS4 Design Premium for Windows/PC. I am switching to an OSX/MAC system. Is it possible to transfer my licenses to the new platform?

    It's possible to transfer licenses but it must be done by contacting a Customer Service representative by phone or web chat. They'll probably have you submit a form.
    Contact Customer Care

  • PI 7.0/7.1 Installation on Windows 64-bit and MaxDB

    Hi Folks,
    We have an installed PI in one server on Windows 2003 using Oracle DB (licensed).
    We wish to install PI in another server on Windows 2003 64-bit but this time it will be MaxDB.
    I've tried searching and found SAP NetWeaver Process Integration 7.1 on Windows_Oracle.pdf.
    Any advise please on how to go about installing PI 7.0/7.1 on Windows 64-bit:MaxDB.  Thank you!
    Regards,
    Lex

    Hi Lex,
    you cannot use the SAP DB (=old name of SAP MaxDB) package you found on the old SAP DB site for your PI installation for various reasons:
    a) SAP DB version 7.4 is VERY old, it is no longer supported since the end of 2006 !
    b) typically, a SAP application and its DBMS are installed using SAPinst
    Try checking the SAP Software Distribution Center (incl. PAM: Product Availability Matrix) on the SAP Support Portal. You can also get the correct software there (when you're an official SAP customer).
    Regards,
    Roland

  • I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

    I have Adobe CS4..... now when I want to print my picture, I get the message "Adobe CS4 has stopped working, sending issue to windows and then disappears.... nothing can print anymore...Help??

    Try updating the printer driver.

  • 64 bit Win 7, Itunes 10.5. Can open Itunes and play music, try to open store and it says "Windowa has stopped working" and closes both Windows and Itunes?? Worked beofre I updated to Itunes 10.5 Tried so many things!! HELP!

    Have Windows 7, 64 bit. Updated ITunes to 10.5 and now I cant open store? I can play music but when trying to open store, or anything else, I get :
    "windows has stopped working and is shutting down" and then Windows and ITunes close?? I have tried so many things?? Help!!

    Yeah, I wrote this wrong. Its ITunes has stopped working and Windows is trying to solve problem, then shuts down.
    I have un-installed , re-installed. Tried earlier version and that wont work any more. Changes firewall, pop-ups whatever...........nothing works. And Apple has been no help. Run test and it says all test are good even to Apple store??

  • Limitations of Quicktime files (.mov and h.264) in Windows 64-bit.

    It was recently brought to my attention (yes, I'm late to the party) that any file that requires the Apple Quicktime process for playback (decoding) is severely limiting my otherwise powerful system.  The Quicktime process is a 32-bit process, which limits your editing functionality to 4GB of RAM—even if you have 32GB or more installed!
    I'm starting this new thread because the thread on which this was brought to my attention wasn't directly related to these issues.
    A few of my questions:  Why do so many cameras create .MOV or .MP4 files that require QuickTime components?  64-bit QuickTime X has aparently been available on the Mac for quite a while, yet I presume they won't allow anyone else to develop a 64-bit codec for Windows, so why hasn't someone sued Apple for monopoly, anti-trust, conflict-of-interest, etc?  And most importantly, in a world where DSLRs and off-board ProRes recorders abound, are Windows users really stuck with no option but to transcode the footage before heavy use in Premiere?  The Atomos recorders provide the option of using DNxHD, however, if I understand correctly, that codec still requires Quicktime (I've not tested this bit).  Is there a matrix available that shows camera / recorded format / requires quicktime / 8- or 10-bit / 4:2:0 or 4:2:2, etc? 
    To my fellow Windows 64-bit editors, how do you keep your sanity when editing "natively" in Premiere .MOV, .MP4, ProRes or DNxHD with the 4GB RAM limitation?  And what camera / off-board recorder do you prefer to avoid both a long transcoding session AND get right to work with native 64-bit codecs?
    Thanks in advance!
    === Systems === 
    Desktop              |   Laptop
    i7-2600K             |   i7-3630qm
    GTX460 (1GB)   |   GTX670mx (3GB)
             Windows 7 64-bit
             16GB RAM

    strypesinpost wrote:
    ...Have you read this yet?
    http://blogs.adobe.com/VideoRoad/2012/12/premiere-pro-and-quicktime-an d-nikon-oh-my.html
    Just now.  Yet, it seems to contradict my own findings.  The article says:  "In the case of Canon DSLR files, there’s something in the file header. Premiere Pro can recognize that the clips came from a Canon camera, and bypass QuickTime. This enables Premiere Pro to have smooth playback of DSLR files..."
    The test I conducted was between files from a Canon 7D in their original format vs. an AVI file I transcoded from those originals using GoPro Studio (formerly Cineform).  I load up a project and timeline with the original 7D files and then scrub the heck out of the timeline, back and forth.  I have Task Manager open in order to monitor my RAM usage.  I simply could not get past roughly 4GB.  Once I deleted all the original .MOV files from the project, retaining only the transcoded .AVIs, the project cut like butter.  The harder I scrubbed the timeline, the higher my RAM usage soared until it gradually, and gracefully came close to maxing out.  Lol.  Is there a better test I should run?
    The other test I ran was a project where I took a single talking head clip of approximately 5 minutes in length.  Nothing too taxing for the hard drive, and something that *should* be easy enough to play completely from RAM, once it played through once or twice.  I cut this clip and staggered a few tracks on top of eachother.  No effects, no transparency.  The cumulative effect was a cuts-only edit, but on the timeline my tracks looked like stairs, etc (perhaps the stairs weren't necessary).  The primary goal here was to watch how the system performed with a simple cuts-only project where Peremiere was repeatedly asked to access the same file from random locations in the file.   The .AVI version of this project, again, played flawlessly.  The .MOV version played even worse than I was expecting, since cuts-only 7D footage is usually not SO hard on the system (even if it is limited to 4GB RAM).  The .MOV project couldn't keep up.  Period.  As soon as the file needed to "jump back" on itself, the refresh rate became intolerable.
    So is the 7D an exception to the rule stated in that article?  It definitely seems to be limited to 4GB of RAM!  If it isn't, why am I seeing this?
    Also, is it possible that the footage from the 7D may not *REQUIRE* Quicktime to decode, but since Quicktime is found on my system, the 7D files default to using it anyway?
    I've not tested my GoPro footage so thoroughly, but I believe it's limited in the same way.  After a transcode to AVI in GoPro Studio, even 2.7K footage plays slick as a whistle.  Not so when I don't transcode.
    Further thoughts?

  • Quicktime and Windows 64-bit OSs

    Hello,
    Does anybody know how to get Quicktime to show the control bars on an web video when the OS is Windows and it is 64-bit.
    I have tried in XP 64-bit, Vista 64-bit and 7 64-bit, but all I get is the first picture in the video, no controls to get it to start.
    Thanks

    The bars never show up in 64bit Vista with QT 7.6.4. They do show up in 7.6.6 but 7.6.6 has some play issues that have not been resolved yet.

  • DAC 10.1.3.4.1 Server on Windows (64 bit) and Linux x86 (64 bit)?

    Hi Friends,
    Please confirm wheteher Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 Server is supported on
    Windows (64 bit) and Linux x86 (64 bit)
    Because from edelivery.oracle.com i could see the downloads only for windows and Linux and not specified as 32/64 - bit
    so will it mean that the same dump is used for both 32 and 64 bit
    1) Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 for Microsoft Windows (V16377-01)
    can the above dump is used for both 32 and 64 bit windows?
    2) Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 for Linux x86 (V16378-01)
    can the above dump is used for both 32 and 64 bit Linux?
    The reason is because for OBIA 7.9.6.3 configuration both the Informatica Power Centre and DAC Server should co-exist
    and i could see seperate installer for 32 and 64 bit for both Windows and Linux whereas i couldn't see it for DAC Server
    Please confirm .
    Regards,
    DB

    It is supported on both platforms. With Linux however, if you have any issues you can to install in a windows environment, then copy over the folder structure. Also, you can possibly run into issues running the setup.exe on 64bit windows. When you open the install directory, go to dac/disk1/install and run the executable for win32. win64bit can return an error where it says it cannot create certain temp directories. It is a known java bug you can find in the support website.
    Edited by: user12838563 on Jul 13, 2011 11:35 PM

  • Windows 7 and adobe cs4 "settings"

    Had Windows 7 RC with cs4 and changed some settings and things were smooth, but now when I installed winows 7 and cs4 again and try to minimize a window, instead of the window being rolled up, you see the picture through windows areo menu bar.(see attached).
    Any quick way to fix that?
    Thanks in advance
    U

    Just got the latest ATI driver and what you see is from that, maybe I didnt make my initial post clear enough. What I want to happen in CS4 is to minimize a window, and have it set in the lower left of the program (like the image attached) but ROLLED UP, i do NOT want to see it "thru" the aero task bar, as I think a setting in CS4 needs to be checked somewhere.
    CS4 work should be contained inside the CS4 program...not bleed out into windows
    Normally in the past the minimized icon would set in lower left and roll up, to see it you would have to maximize in CS4.
    Im stuck.....becuse I had this working fine with windows 7 RC 3 months ago, but cant remember what I done in CS4....
    Is there any quick settings to make the program act and run like CS3?

  • Hello  I have an I mac with Yosemite operating system.  I installed a windows seven 64 bit on it. also i have a parallels desk top with version 10. if i run my windows  without parallels my windows and my office is activated ,but if i run my parallel

    Hello
    I have an I mac with Yosemite operating system.
    I installed a windows seven 64 bit on it.
    also i have a parallels desk top with version 10.
    if i run my windows  without parallels my windows and my office is activated ,but if i run my parallels then my windows and my office can not be activated .
    My problem is activating my windows and office through parallels desktop .
    i had installed windows an parallel desktop several times ,also i installed several times parallel tools with menu bar in parallels desk top and when i am installing parallels desktop tools in any way i can see the (CTRL+ALT )
    all of my application in windows works properly through parallels desktop except 
    activation of office and windows .
    I do not no any solution for my problem , i need for helps .thanks 

    It is not W10, it is the Technical Preview version of W10.
    Search on the Windows forums (fora for the latinist) for activation in the TP W10.

Maybe you are looking for