Windows 7 and Acronis in Thinkstation D10

Hello
I open this post to share an experience about Windows 7 and Acronis Workstation.
This weekend I installed a new graphics card, an ATI HD 6850, I know this isn´t a working card, but I don´t work with CAD, 3D, renders, etc... I am developer, (programming + design).
The main feature to buy this card is Eyefinity, nVidia don´t let me use 3 monitors without SLI, (I can use desktop apps with two cards but not certain apps using Full Window), and reading post by Erik and other members, D10
doesn´t support SLI.
OK, Windows XP don´t let me use 3 monitors, so Windows 7 is the solution. Once Windows 7 is installed and upgraded I reboot and made a backup with Acronis BR10 Workstation BootCD.
After that I installed the Lenovo Thinkvantage tools, (showing there is no need to upgrade nothing), work software, Intel SSD Tool and Windows Acronis BR10. When I finished reboot and made an Acronis BootCD backup.
I finished and I thought, "it's time to work". When I reboot, uppps, a "nice" blue screen.
First thought, I was wrong with the graphics card, there must be incompatibility, but first reboot without the software installed system works fine.
I use the Acronis BootCD to recover the second copy, (all installed), and the same blue screen, but when recover the first copy, (only system updated) works fine, so I made a copy with BootCD every time I installed
something.
One of the crash shown "SSD getting started", I thought it was due to Intel SSD tool, but much people had installed this, and without SSD Tool, when I install Acronis in Windows, once again.
The result is I can install all software except Acronis BR10 Workstation, because in the first reboot after install Acronis the system crash and the "nice" bluescreen is shown.
I hope this can help others users and thanks to all.

I have been on Win7 Pro for quite some time and the local thumbs.db has only recently started showing up in the local folders. I recall this was a problem when upgrading from Win XP but my laptop is a clean install from media. I recently had
to wipe and re-install Win7 Pro on my laptop and the problem began with after the SP1 install.
We all want thumbnail caching - just not in the local folders. The network share matter is a different animal.
What is perplexing is that Win7 uses several central thumbs.db type cache files and doesn't need the local thumbs.db file, and yet I am getting the exact same behavior as the others in this post. I've often wondered if the junctions are causing this,
or perhaps if you sync to file shares for media like I do then once a thumbs.db is in a folder Win7 uses it - kind of a use local then central behavior. Something for a deep gearhead to consider.
My solution that so far seems to work is to do the following:
- I always have "show all system and hidden files" on my computers... so set that first if not set
- In Explorer go to Tools -> Folder Options -> View and check the box for "Always Show Icons, Never Thumbnails"
- Next from c:\users\[name]\ search for all files named thumbs.db
- Delete all of the thumbs.db files (you'll need admin privs)
- Now return to the Tools -> Folder Options -> View and uncheck the box for "Always Show Icons, Never Thumbnails"
This works for me, the local files no longer show up, and yet the performance is fine because Win7 is using the central db.

Similar Messages

ThinkStation D10 7 Sata device

It is possible to connect 5 sata hdd and 2 optical device (sata) in a ThinkStation D10 6493-33G.
The motherboard has 5 sata connectors and 5 sas connectors.
Solved!
Go to Solution.

update: i just installed a single SATA HDD on the SAS array successfully so it looks like you can install any SATA device on any of the 10 available connectors. the SATA drive had to be flagged as 'online' using diskmgmt.msc to get it to show up in windows. however, i still recommend using the hard drives on the SATA controller and optical drives on the SAS controller.
on a side note, i benchmarked the drive using both the SAS and SATA controllers and speeds were identical.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?

My macbook air (version 10.9.4) display flickers, has random tabs and windows opening, and there are random ads almost everywhere. All this happens when I am using safari. What can I do?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/(de|[nst]):/p;' ' {sub(/^ +/,"")};/r:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,Inter,iTu,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I install window 8 and Unfortunatly all drive format. And all drive mix, now i have only 1 DRIVE C. I want Bit locker Drive's data Back

Last sunday i install a window 8 and this window format my all drive & make it 1 drive (DRIVE C). Before all of this i have 5 drive in different size with 1 Bitlocker protect drive.
So i try data recovery software to recover my data. i got back all my data without that ( bitlocker ) protected drive.
so please guys help me how can i get back data from bitlocker protected drives.
please please help me.

Hi,
I sorry for your experience, but there is no way to recovery the data encryped by BitLocker untill now.
BitLocker is designed to make the encrypted drive unrecoverable without the required authentication. When in recovery mode, the user needs the recovery password or recovery key to unlock the encrypted drive. Therefore, we highly recommend
that you store the recovery information in AD DS or in another safe location.
Please refer to the link below for the statement:
http://technet.microsoft.com/de-de/library/ee449438(v=ws.10).aspx#BKMK_RecoveryInfo
Roger Lu
TechNet Community Support

A hardy ghost of Firefox is apparently running in my computer and I am unable to open Firefox, even after Window restarts and an uninstall/re-install. How do I find and fix this problem?

What happened first is Firefox was revving and using most of my CPU, ultimately "not responding" too easily and for too long, so I closed it in order to reopen it, but Firefox remained running in background (Task Mgr, Processes) after closing, continuing to use almost all my CPU, so I ended the process in Task Mgr.
When I went to re-open it, window opened and told me Firefox could not be opened because another "instance"(?) was still running, to close it or restart Windows. I couldn't close it because I already closed it AND ended the process, so I restarted Windows.
When I tried to open Firefox, I got the same pop-up. I think I restarted Windows one more time, and then uninstalled Firefox, except for my personal settings (in order to save the bookmarks, which I couldn't find in the Firefox folder in Program Files (only Favorites, which were not my bookmarks; I later wondered if they were part of the Firefox add-on "Add This" --??).
I then uninstalled Firefox and re-installed it. When I tried to start the newly re-installed program, I had the same pop-up telling me Firefox was already running and to close it or restart Windows.
I searched my computer folders for anything that might help, did a Search of the computer for "Firefox", and was given some Firefox folders and if they weren't from the new re-install, I deleted them. One thing I noticed was that the program folder did NOT have the program (Firefox.exe) icon to start Firefox.
I uninstalled Firefox and had to resort to using Internet Explorer, which I do NOT like. My rich library of bookmarks are who knows where.
I don't know if this is related, but in searching my computer's Administrative Services and Component Tools (and the like) hoping to find something that would help me fix Firefox, I inadvertently learned that "MMC could not create the snap-in. The snap-in might not have been installed correctly. Name: .NET Framework 1.1 Config."
Please help me get Firefox back and figure out what is going on in my computer that led to this. I am a basic user and not techno-computer saavy, so if anyone can help me with this, please give me step-by-step bonehead instructions.
Thank you so much for any help you can offer!

Make sure that Firefox is set as the default browser.
*http://kb.mozillazine.org/Default_browser
*https://support.mozilla.org/kb/How+to+make+Firefox+the+default+browser
*https://support.mozilla.org/kb/Setting+Firefox+as+the+default+browser+does+not+work

I am on windows 7 and I upgraded to 10.0.2 and now it will not open. I have removed firefox completely and uploaded it again and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version and once again nothing.

I am on windows 7 and I upgraded to the newest verison of firefox and now it will not open. I have removed firefox completely and uploaded it again and that did not work. I then made sure it could get through my firewall and that did not work. So my latest attempt I removed firefox 10 again and uploaded the beta version hoping that would do it and once again nothing. It will not open at all. Please help - is there a live chat or a number to talk to someone at Firefox?

I think when uninstalling you may also have to choose (tick) to delete the preferences and other personal data like the bookmarks, stored passwords etc. to erase completely. If you are installing afresh, please try right-clicking on the file and '''Run as administrator''' to install. And when uninstalling, please also make sure choose to delete all data and also manually delete any '''Mozilla''', '''Mozilla Firefox''' or '''Firefox''' from %appdata%, %localappdata% and %programfiles%. You can open a location by typing for eg. %appdata% in the '''Run''' box (Windows key + R). You may also have to check the '''VirtualStore''' folder in %localappdata%. Files in the VirtualStore can be problematic. I think a clean installation may help.
[https://www.mozilla.org/en-US/firefox/new/ Firefox]
[http://kb.mozillazine.org/Installation_directory Installation Folder]
[http://kb.mozillazine.org/Profile_folder Profile Folder]
Please note that using system restore would usually damage the Firefox installation.

I brought my itunes library onto a mac from a windows machine and now i have two separate libraries. How can I merge them?

I moved to Mac from a Windows machine where I had downloaded all of my CDs into iTunes. When I got my Mac it only put my purchased items into my library. So I merged my windows library and it created a whole new user account with that on it. I now have two libraries and can only sync music with one account or I lose all of my imported CDs. Help! How do I merge them.

The easiest way is to get both computers on your home network and copy the files over the network. It's easier than you think
Check this earlier thread:
[How do I move my itunes library to new computer|http://discussions.apple.com/thread.jspa?messageID=7937172&#7937172]
That thread mentions Target Disk Mode, which won't help moving from a PC to a Mac. But you can use file sharing to copy the files.
As the articles all say: don't forget to de-authorize your PC before you get rid of it.

Blue screen and restart / ThinkPad T40 2373-94G Windows 7 and 32MB ATI Radeon 9000

Hello !
I'm having a lot of trouble with video driver for windows 7 for ati radeon 9000.
There is no driver for windows 7 and I tryed with driver for winXP, ... etc and didnt find any solution .
Actually driver for windows xp actually works on windows 7, but as soon as I tried to open any application or game I got blue screen with error and computer reboots...
Thank you for any information or solution !
My computer is :
Product: ThinkPad T40 2373-94G [change]
Operating system: Windows 7 [change]
Original description: P M 1.6GHz, 512MB RAM, 80GB 4200rpm HDD, 14.1 SXGA+(1400x1050) TFT LCD, 32MB ATI Radeon 9000, 16x10x24x/8x CD-RW/DVD(slim), Bluetooth/Modem, 1Gb Ether, Intel 802.11b , Sec Chip, UltraNav, 9 cell Batt, WinXP Pro

Welcome to the forum!
As I'm sure you know by know, your GPU is not supported in W7.
That being said, take a look at this thread:
http://forum.thinkpads.com/viewtopic.php?f=57&t=77964
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

My new 8th gen iPod nano is 'not recognized' by my computer. My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting...

My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
Thanks

Try a different cable. And are you connecting directly to your computer or through a USB hub?

Ipod not recognized by windows, itunes, and will not charge with pc.

yesterday, when i went to sync some new music onto my 1gen nano, it did not work (duh). i plugged it in 3 times:
-1st, it displayed the "do not connect screen" for one second, and itunes flashed the screen it shows when your ipod is connected, but then the ipod disconnected itself after that one second.
-2nd, windows gave me a message saying the hardware could not be recognized.
-3rd, nothing at all happened, as has been happening each time i try to plug it in since then.
i've done the 5 R's .. and i've tried all the suggestions shown on posts that sound like mine, including these: Windows XP cannot detect an iPod.
USB drivers are not installed properly or are out of date.
iTunes 7 doesn't recognize the iPod.
my ipod will charge when plugged into a wall charger, and it plays normally. also, my brother's ipod (2nd gen nano) is recognized by windows/itunes.

Hello
I have been having nearly the same problem as Crashcup for the past month. Differences being I am operating with Windows Vista and my iPod is a 160GB Classic. I have gone through all the steps in the troubleshooting documents to no result. I attach my iPod and it is not recognized by Windows, iTunes or even in Device Manager. Not even as an "Unknown Device".
I know there is nothing wrong with the USB ports as two different external hard drives and a video game controller work perfectly fine through them. Same goes with the iPod itself; it continues to play and function normally, and is recognized by a charging device completely separate from my laptop. Just when attached to the computer there is no sign of it.
I am very frustrated that there is no further instruction with regard to what to do with an iPod Classic (as referred to by Crashcup: "...it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC????)
Any help would be much appreciated.l=

I upgraded to 10.5.0.142 on windows 7 and I can no longer add any music to my libraries

I upgraded to 10.5.0.142 on windows 7 and I can no longer add any music to my libaries.
It makes a notification sound, but there is no message, and it just doesn't do anything.
How frustrating. Considering apple make excellent products, iTunes is terrible.

I find a way to add music.
Make sure iTunes is closed.
Go to the song file on your computer. If the file has the little black musical iTunes symbol as its icon, just double click the file. It should open up in iTunes and stay in you library.
If the little black musical iTunes symbol isn't next to the file, right click the file and go to "Open With" and then click on "iTunes". It should open up in iTunes and stay in your library.
Yeaaa its the long way but that's the only way for now, unfortunately.

Windows 7 and Windows 8 Driver Availability Chart for Creative's products

Hello Everyone,
There is a Knowledge base article that contains the Windows 7 and 8 Driver Availability Chart for Creative's products.
Thank you.
Mod Notes: Updated the link and include Windows 8.

For Windows 7
To run the Hardware and Devices troubleshooter in Windows 7, follow these steps:
Open the Hardware and Devices troubleshooter by clicking the Start button , and then clicking Control Panel.
In the search box, enter troubleshooter, and then click Troubleshooting.
Under Hardware and Sound, click Configure a device.

Windows 7 and Windows 8 in the same computer

I have HP Pavilion HDX9300 with two hard discs. I have installed Windows 7 in och of them and Windows 8 in the other. Both W7 and W8 works when the disc is placed in one of the discplaces but not in the other.
If I want to change from W7 to W8 I thus have to change place for the hard disc. My desire is to change from W7 to W8 without changing places for the harddiscs. Is it possible? If so, how do I do?

I believe the second hard drive bay in the HDX9300 is not bootable. You need to load Windows 8 on the same hard drive as Windows 7 as a dual boot.
http://www.extremetech.com/computing/143380-how-to-dual-boot-windows-8-and-windows-7
You could then use the second drive as storage accessible to both operating systems.

Windows 7 and blinking cursor issue...

(Just an FYI...I originally posted this in the MBP forum because I didn't realize there was a bootcamp forum)
I recently had my computer repaired through AppleCare. They replaced the logic board, top cover, a connector and battery. When I first got the computer back, I turned it on, booted to the Mac partition, everything was good. I then booted to Windows with the Bootcamp partition and everything was good. Even the stuff I had open before the damage were still up. I shut it down, boxed everything up and didn't touch it until I got home.
When I got home, I booted up Windows 7 and now all I get is it boots to a black screen with the cursor. I ran the repair utility, tried safe mode and it says no errors are found, however, it still won't load. I haven't figured out why it booted up the first time I got the computer back but now it won't do anything. I never got a chance to back everything up because my computer was damaged from liquid damage, but I can still see all the files on my Bootcamp partition through finder from the Mac side.
I don't know exactly why it's doing this or what to search to find an answer to the problem. When I first got my MBP, I installed Windows 7 through and upgrade disc from my job, so I don't know what my next steps should be.
Other steps:
Tried WinClone to copy the drive and it gave me an error message on the log.
Tried to run system repair several times and it came back with no errors. Same for memory diagnostic tool. Everytime I run the repairs, it finds no errors but still boots up to the black screen with cursor. Ugh, this is so frustrating.
Right now I have most of my files backed up on my external drive, but I still want to find a way to clone the drive and then it looks like my only choice is to do a clean install. How do I do that? Someone else set up the partition for me when I got my computer, so I don't know how to remove the version of Windows 7 to do a clean install or if I have to start messing with the partition. I only have an upgrade disk.
Any more thoughts? I thought about calling AppleCare but I doubt they'd help since it's Windows 7, but it was not doing this before the repair. I guess I'm lucky I still have access to the files.

Leeopard huh?
You need Snow Leopard w. 10.6.x to get 3.0.
If it works and no issues fine though probably the first time I have read someone did.
BC 2.2 was more about XP and some support for Vista.

Windows 8 and QuickVPN...

I have several laptops that are running Windows 7 and quickVPN very successfully... Now windows 8 comes along and I have 2 users that upgraded... And for 2 days they continued to work, but now they are getting the typical failure at the ping confirmation..."cannot verify network would you like to wait"....not verbatim. I have made sure that all the settings are the correct ie. IPSEC running, ports open, firewall is set correctly, correct rules are created... just like I had to do when windows 7 came out. I still cannot get it to connect. Does anybody have any ideas, or have any idea when Cisco is going to release a Windows 8 version of QuickVPN? All the hardware is the same and has been working well for years, different routers through the years but with a few tweeks along the way, using every OS from win98se-win 7.
Current setup:
router - RV110W (latest firmware version)
current OS versions - Win XP, Win 7(64), and Win 8(64) not currently functioning
All OS's are up to date with updates
All certificates are up date and in the right place
user names and passwords are created and have been functioning correctly in the past
Weather or I agree with the upgrade of these laptops or not it has been done and I have to make it work as soon as I can so any assistance would be great.

Hi Norm.
I´ve created a document with some tips about VPN, you could see it here:
https://supportforums.cisco.com/docs/DOC-29399
If this doesn´t resolve your problem and you need a quick answer, can you please reach out to our Small Business Support Center and open a Service Request to address this issue? One of our Engineers may be able to work with you and diagnose the root cause. You can find the appropriate contact information for SBSC in the below link.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
“Please rate useful posts so other users can benefit from it”
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Windows 7 and Acronis in Thinkstation D10

Similar Messages

Maybe you are looking for