Windows 7 and HP psc 1317 All in One printer

A friend has a new laptop with Windows 7 installed. I am trying to install the software for his HP psc 1317 series all in one. I have down loaded the drivers etc from the HP site but despite running it as an administrator, both from the original disc and the download, it hangs up half way through telling me to run it as an administrator which I am. (The run as command no longer exists in Win 7) As the 1317 is an old unit but worked perfectly in XP do we have to throw it away which is a shame? I have gone into setup in the software and clicked to run as administrator but to no avail.
Message Edited by qkjb on 11-19-2009 02:53 AM

I am not sure about the driver you are trying to install...however here is the correct drivers for PSC 1317 with Windows 7 Support:
ftp://ftp.hp.com/pub/softlib/software11/COL30219/al-75052-1/AIO_CDB_NonNet_Full_Win_WW_130_141.exe
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Similar Messages

Windows RT and HP PSC 1510 All-in-One printer connection

Hi, I have a Windows 8.1 RT tablet (Microsoft Surface 2) and a wired HP PSC 1510 All-in-One printer. Now when I plug in the printer via the USB, there is no driver that can be found to make this printer work with my device. Anyone have this problem or any solutions? I've tried looking at HP support and nothing there has been helpful.
Let me add that on the Microsoft Surface, you cannot run .EXE files which are the file types of the HP drivers.
Thanks ahead
This question was solved.
View Solution.

Hi,
I afraid the printer is not supported on Windows RT, as you may find listed within the following support document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03168175&tmp_task=prodinfoCategory&cc=us&dlc=en...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP TouchSmart 600 and HP psc 2210 all-in-one printer

Hi SiobhanF,
I just registered and this is my first post.
I recently bought a new PC...an HP TouchSmart 600. My printer is a HP psc 2210 all-in-one. I need advice on whether the two are compatible and if so how to get them working together.
Thank you,
waj

This is likely caused by the failure of one of your cartridges. Remove the black cartridge and print a test page. Does the printer print at normal speed? Is so the black cartridge was the issue and should be replaced. If not then put the black cartridge back in and remove the color cartridge and print test page. If the printer now prints normal speed the color cartridge was at fault and needs to be replaced.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp-psc 1317 all-in-one printing problems

I have a hp psc 1317 printer scanner. It is connected to my laptop running Windows Vista. Recently the print quality diminished until now when I print a document it sounds like printing is happening but there is no mark on the paper whatsoever.
Today I downloaded and installed the HP Solution Centre software. My ink levels are pretty full and when I attempt a test document the software doesn't seem to think there is a problem although still nothing is printing on the paper.
I am completely confsued as to what is causing this problem. The only thing I can think might be connected to the problem is that in the printer window of the control panel two printers are showing: hp psc 1310 and hp psc 1310 (copy 1). I'm not sure why the printer has been listed twice but I have chosen each printer in turn and attempted to print a document. When the 'original' printer is selected nothing is printed at all but if I select the 'copy' printer it goes through the process described above.
There is obviously not a problem with ink levels and the printer and computer are communicating but something somewhere is going wrong and I'd love someone's help if at all possible.
Thanks so much
Chris

This article should help resolve your blank pages:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01892627&cc=us&dlc=en&lc=en
Give the steps listed under your operating system a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP PSC 1317 all-in-one Prints slowly

I have owned my HP 1317 for nearly 5 years & in that time it has performed really well. Lately however its speed of printing has slowed to a snails pace - it can take up to 10 to 15 minutes to print out a simple Word document.
The machine hasnt been dropped, knocked or otherwise abused, its has nearly full ink cartridges and the print quality is fine, with no spurious lines, smudges or other issues.
When a document is sent to print, the carriage will eventually move, sweep back & forward maybe 3 or 4 times & then suddenly stop, wait for up to a minute before moving again and then repeat this cycle until the document is complete.
Do you have any suggstions please as to how we can fix this as its driving me nuts !!
Many Thanks

Most likely one of your print cartrdiges has failed and is incorrectly reporting its temperature. I do not recall if the PSC 1317 can print with one of the cartrdiges removed but if so try the following: remove the color cartrdige and print a simple text page from notepad. If the print is normal speed then the color cartridge is the issue and should be replaced. If the printer still pauses at each swath then reinstall the color cartridge and remove the black cartridge. Print the page from notepad once again. Does the printer now pause during printing? If not then the black cartridge is the issue and should be replaced.
If the printer will not print with one of the cartridges removed (or if one of the cartrdiges is identified by the above procedure as the issue) then try cleaning the cartrdige contacts as shown here. This is for a different cartridge series but the procedure would be the same.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP PSC 1317 All-In-One Problems

I am using a HP PSC 1317 All-In-One printer located on my Windows network, Mshome, connected to my Desktop Computer (PC). Using two Windows-powered laptops with the HP PSC printer being 'Shared' I am successfully able to print out documents over the network, wirelessly.
Today I have spent most of my time trying to get this same result using my PowerBook G4.
I connect to my Network, Mshome, open up a document and select print. My current printer is not listed so I click to add one. I then go through the steps required to add a printer to my PowerBook over the network. This all goes well until is lists it as 'Generic' to which I open up and select HP. I scroll up and down the list umpteen times to find my printer model is not listed so for most of my day I have been trying out official HP drivers for OS X for my model of printer including 3rd party drivers that all don't seem to work.
I bit the bullent and decided to install the printer directly via USB on to my PowerBook. Despite installing unwanted applications on my PowerBook that works and I can print out successfully. Using this same method, I try to add the printer over the network, with it still plugged in to my PowerBook, thinking that I would be able to locate the drivers, but still no luck (or no idea where these drivers will be located). I give up and plug the printer back in to my Desktop PC and then try to add it using the same process before but unable to locate the required drivers and the product model under HP.
I am totally clueless as to what I can do to have my PowerBook print out my work wirelessly using my HP PSC 1317 All-In-One printer using my Windows Network, Mshome.
Usually I am quite quick to fixing these sort of computer/hardware-related problems but this one simply has me stumped. Any help and adive on this would greatly help and end a wasted day.
Regards,
Steve

There was no PSC 1310 model choice in the menu. Deskjet 900 series doesn't work and, yes, at one point I did install Ghostscript. My printer does, however, work on the Windows network using multiple computers and laptops running Windows. Nevertheless, connecting to the network and using the printer using my PowerBook doesn't.
Nevermind. My alternative is that I can send my printable documents to a Windows computer on the network to print out. Nothing I cannot bypass anyway.
Thanks for the help.

HP Officejet and PSC Full Feature Software for HP PSC 1210 All in one printer

Hello ,
I have HP PSC 1210 All in one printer but i am using windows 7 system.how can i find
'HP Officejet and PSC Full Feature Software'
compatible for windows 7, in hp.com i sould find the above software for windows xp but for windows xp its not working, my printer physical keys are not working so i need software to do everyything from print to scan, copy etc from my windows 7 laptop itself. pls help with sofware for windows 7

Hi,
There is not a full feature software Win 7 download available for the HP PSC 1210. The following document includes instructions on how to install the in-OS Win 7 driver with instructions on how to scan:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&cc=us&dlc=en&lc=en&os=4062&product=907...=
I work for HP.

HP PSC 1210 All-in-One Printer -- need Software (scanner directory), for windows 7 (64) bit

hi,
I am kind of done with this Printer ! lost hope in customer care and support hit with HP ! from Past 10 days searching a software to scan few doc from my printer 1210 (HP PSC 1210 All-in-One Printer) but i dint find.... i got one from some source (166 Mb) file, but to my surprise its not compatable with Windows 7. i am totally depressed now.... Please help me to find software for this (scanner document) I have lost the CD lont time back can i download This some where?

Hi there,
I understand you're looking for drivers for your PSC 1210 on Windows 7. I will certainly do my best to guide you in this issue.
At this time there are no HP drivers available for this printer for Windows 7. You can still use the printer with Windows 7, you will just have to use the drivers available within Windows 7. That document will walk you through what you need to do in order to get printing again, and will also show you how to scan with this Windows driver.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

User Defined Paper Size, Windows 7, PSC 2110 all in one printer

I am trying to print a 5x7 photo using the user defined paper size of my PSC 2110 All-in-One printer. When I used X
P os, it was easy to do. Since upgrading to Windows 7, I have been using the default drivers that load with that, but it doesn't have the ability to define paper size. Is there a driver available that would let me do this? I've tried to use compatability mode to get the original drivers from the installation disc to work, but it won't do it.

Hi,
The last update was for Vista, 5 years ago:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4220...
At this stage, Windows 7 only supplies a very basic and generic print driver for this printer just for print. You may want to keep that way or buy a new printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

PSC 1510 All in one printer - won't print even black and white when colour cartridge not recognised

My PSC 1510 All in one printer is flashing the "check printer cartrige icon" and both "Black" and "Colour" icons at the bottom left of the printer.
It won't print at all, even when I select grayscale (black and white). The help pages tell me that if I remove the colour cartridge the printer will switch to backup mode and I'll still be able to print in black and white (though not copy or scan). But this is not the case, and I can find no way of switching manually to backup mode. The help pages have no useful explanation of backup mode. I've also tried cleaning the cartridge (which I'm pretty sure isn't empty) but that makes no difference.
Can anyone help? I'd be very grateful.

gabri21 wrote: I have a very similar problem with my PSC1510 but only the colour cartridge light is blinking. I am also unable to find any useful information to set up printing in back up mode. Can anyone assist in resolving this problem for us?
With only one cartridge light blinking I would suspect the cartridge, they do rarely fail (much more often for reman cartridges, see here). Clean the cartridge contascts as shown here. If that fails and the cartridge is an original HP then check the warranty date as shown here. If the cartridge is in warranty return it to your dealer for a warranty replacement.
The printer will automatically switch to backup mode if the black (or color in some printers) cartridge is removed. I do not know if this works with the PSC 1510, some all-in-on devices insist on having both cartridges present.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Paper Jam for HP PSC 1610 All-in-One Printer

Paper Jam for HP PSC 1610 All-in-One Printer:
I had a paper jam and cleared the paper from the printer. Now every time I turn the printer "on" it picks up the top piece of paper from the tray and runs it about ½ to ¾ of the way thru the paper feed, stops, and then displays message "paper jam clear paper and then press OK". When I do that it simply picks up the next piece of paper off the tray and does the message again. If I push the OK button on the printer it will simply finish the ejection and then pick up the next paper from the tray, and do the same thing. I have examined the interior (and exterior) of the printer for paper scraps and any other obvious sign of trouble (dirty drive wheels, missing rollers, broken springs, etc...) and can not see anything unusual. I can not print a test print because of the paper jam message. I am running Windows XP and the printer has been working fine for months (until this recent jam). I did all the steps from the HP fix it site including clean rollers, plug and unplugged, carriage travel OK and more. Don't know what to do now........Any help would be great!!!! Thank you!

Hi my printer psc 1610 hp not picking paper

Installing software for my HP psc 1210 all-in-one printer on to my Mac?

I have downloaded new software and drivers for my all-in-one printer. I am running OS X 10.5.2 on a 20" 2.16 GHz Intel Core 2 Duo. The computer recognises that a printer is present and I can print with no problems. The problem that I'm having is with the scanner function. I don't think that the HP software is registering that there is a printer present. When I go into the HP setup assistant no printer comes up in the selection window. When I go into Printer & Fax via system preferences the HP psc 1210 series comes up as the default printer. I've had this problems before but cannot remember how I rectified it. I'm sure it got something to do with erasing the driver's off the computer and starting over again. Can anyone please help me or point me in the right direction. Thanks

Hello,
Here is a link to a support document on hp.com on how to install on OS X Mavericks.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&tmp_track_link=ot_faqs/top_issues/en_u...
Let me know if this was usefull by clicking on the Kudos button.
I work for HP.
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

Installing HP PSC 1350 all-in-one printer/scanner

In the past, I could usually solve the "Offline" or "Not Connected" problems by unplugging my printer for a few minutes, but that no longer works. So, I decided to buy another one. However, just before clicking on the BUY button on Amazon, I decided to try to fix the problem one more time. Part of the "fix" was deleting my printer from the computer and then reinstalling it. This is where I'm now stuck. I deleted it, but I can't reinstall it. I get to the ADD window, but everything is grayed out. So, how do I install my printer? I might add that the HP instructions that I was following (OSX v. 10.9 Mavericks- Installing and using the printer on a Mac) are what got me this far.

Have you installed the v10.9 Mavericks compatible driver yet >> Software & driver downloads HP PSC 1350 All-in-One Printer | HP® Support
After you download the driver, open System Preferences > Printer & Scanners > Print
Delete the current printer by selecting it then click - (minus)
Then click + to add the printer back in.
That should load the driver for you.

HP PSC 1310 All-in-One Printer

Hi
I need to download the the full set of drivers & software so i can install them on a friends computer who does not have a internet connection yet and will not for a while yet..
the only ones i can see need to connect to the internet to download the drivers..
Printer = HP PSC 1310 All-in-One Printer
Operation system = Windows 8.1 x64
PS: Why do printer companies make it so difficult to download the full set of drivers\software when people have spent good money buying there printers.... i get asked this question a lot but people....
thanks
We all make mistakes said the Dalek climbing off the Dustbin.

Hello,
Full feature driver is available for download for this model. Please select the OS from the drop down list first and then select next to download the driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=3745...
I work for HP but my posts and replies are my own.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

XP software disc does not work on 8.1 HP PSC 2355v All in One Printer

Please excuse my novice actions in the subject description as I put my problem and request there. Basically: My XP software Disc will not work on my Windows 8.1 computer for my HP PSC 2355v All In One Printer. Needless to say I can print with a downloaded driver but can not use the Managerial software on the XP disc. When I try to work from the printer it does not recognize the computer, so is there HP software out there that can be downloaded simply to my computer? If so, Where and How can I get it. Thanks again.

Hi,
Unfortunately no more support after Vista but you can use basic function of the printer using the following instructions:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03168175#N135752
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Windows 7 and HP psc 1317 All in One printer

Similar Messages

Maybe you are looking for