Windows 7 and iTouch sync issues

I recently upgraded to Windows 7 64-bit.  I installed iTunes 64-bit as well.  Yesterday when I tried to sync for the first time it too me reconnecting and or restarting my iTouch 2 or 3 times before iTunes would recognize it.  My CPU recognized it right away.
Today, while trying to sync it, it is not recognizing it at all.  Also, when I load iTunes, it is taking forever to load and usually goes non-responsive for about a minute before it fully loads.  When I connect my iTouch, iTunes goes unresponsive again for about a minute but the iTouch never pops up under the "devices" tab.
Any and all advice would be very much appreciated.

back up all the files on your iTunes first. I'v experienced problems with installing and using iTunes on Windows 7 to the point were I am going to switch to mac. But thats ireavent. It took me 4+ times of downloading, deleteing, and redownloading iTunes before I was able to acually use iTunes. I'm pretty sure the problem lies in Windows 7 and not iTunes because I haven't had a single problem with Vista and iTunes. If its just slow try rebooting your system, I know I sound like an IT guy, but try it first to see what happens. Hope this helps.

Similar Messages

  • Playback pauses and audio sync issues with live video stream

    I'm seeing playback pauses about every three seconds and audio sync issues with our live demo stream when using the OSMF/Strobe player.  It happens on both our 2Mbps 720p stream and our 480p 750Kbps stream so it does not seem to be related to higher resolution/bandwidth streams.  It also happens if I point directly to a stream asset or if I point to a .f4v with both streams listed for dynamic so it does not seem to be related to dynamic streaming specifically.
    The same live streams play back very well without pauses or audio sync issues in the Akamai's dynamic player and even slightly better with JW 5.2.
    I have viewed the OSMF/Strobe playback on three different laptops of various age (3 months to 2 years) and two are Windows and one is Linux.  I have also tried the various buffering options on the Flash Media Player Setup and Strobe setup and it has not made a noticeable difference.
    To see the stream with the Akamai player, go to:  http://live.kulabyte.com
    To see the stream with the OSMF/Strobe player, go to:  http://live.kulabyte.com/osmf
    I do not have JW set up for public viewing yet, but the two above show the distinct difference.
    We are really hoping to start pointing our customers towards the OSMF player because of the support provided by the community and Adobe, but we have to get the quality of the playback to be acceptable first.
    If someone has ideas on debugging I can PM the actual video assets to you.
    Thanks,
    Tim

    Hi Tim,
    You need to add this setting:
    dynamicStreamBufferTime=8
    The actual value can be higher or lower. The best practice is to use a value that is twice the keyframe distance. Anyway, try different values and see which performs the best for your content.
    I know that the setup page does not contain this option and it is not documented in the UserGuide. We simply missed it. Sorry.
    Also note that the dynamic buffering algorithms are not being used for dynamic streaming content. I tried to explain this here:
    https://sourceforge.net/adobe/smp/wiki/Dynamic%20Buffering/
    Looking forward to your confirmation that this solved your issue.
    -Andrian

  • TIMECODES are important for audio and video sync issues

    Hello, just wanted to pass on what I learned so that others can avoid the trouble that I've had to go through. Perhaps this may help someone who is stuck on the launch pad. :)
    BOTTOM LINE: Info for the beginner. Audio and video not in sync in Premiere Pro CS3 V3.2.0
    PROBLEM: Capture works great it seems. When I go to the folder that contains the captured file and view in Windows Media Player audio and video are in sync. BUT when viewing the video asset in the source and program monitors, the audio and video are not in sync.
    SOLUTION:
    Before capturing a tape make certain the following is checked:
    (1) Edit->Preferences->Capture->Use device control timecode
    (2) Edit->Preferences->Device Control->Options->Timecode Format
    (3) Project->Project Settings->General->Video->Display format
    As for the devices timecode choose something other than Auto Detect. Then match the project timecode with what was chosen during capture. The projects display format could of course be set to frames.
    I searched everywhere for audio and video sync issues in google, adobe forums, F1 help, and hv20.com and everyone was talking about:
    (1) Presets: 1080p30 vs. 1080i30 (60i).
    (2) brakes in the tape where timecode for the audio and video get misaligned during capture.
    But choosing the correct hardware settings and timecodes to solve audio and video sync issues never popped up.
    MY HARDWARE: Canon HV30, HDV

    >Audio and video not in sync in Premiere Pro CS3 V3.2.0
    Must be an HDV only issue because my synch is always perfect.

  • ATV and ITunes Sync issues - Windows Vista

    Greetings everyone,
    For the last 4 or 5 weeks I have had the issue of ITunes and the ATV not syncing unless I reboot the ATV. I am running Vista 32 bit with no firewall on the machine (the router handles it) and Avast Anti Virus. The ATV is "wired" in to the network and has access to the Internet even during the issue of not syncing to ITunes.
    Scenario: I download new content in to ITunes and hit Sync (not the content just the library so I can see it to stream) under my ATV. I receive an error " ATV is not responding. Check that any firewall software running on this computer has been set to allow communication on port 3689". Ok no firewall is present to block the port and it works and syncs fine if I reboot the ATV for ONE session. If I download more content it is another reboot of the ATV to sync.
    Any insight would be helpful!

    did you ever get a response or figure out how to set your ATV up? I've got the same problem. Turned off my anti virus and my firewall and I think i've opened the port correctly on my router, but still get the error.

  • Iphone 4 and itunes syncing issues

    Not sure if this is an itunes issue or iphone4 + itunes issue
    So got the new iphone4 and was able to activate, restore backup and sync additional song and videos. After the second or third sync, Itunes started to crash my windows xp when syncing started. I tried syncing with ipod and iphone 3g to see if it was an itunes issue, but they sync fine. Anyone experiencing this or have any thoughts?
    Thanks!

    Same happening with me, though I can't find the source of what's causing mine to crash. I have not yet synced any music to my iPhone4 so it can't be that. I've deleted my Winnie-the-Pooh book (which i had read elsewhere to be the source) and any free apps that I thought might be the cause too but still, itunes crashes when it starts "backing up iphone".
    Can anyone help??
    Have just turned my iPhone off and back on again, and deleted an app that I remembered didn't work 100% and now iTunes doesn't crash!
    Message was edited by: laurawarren1

  • Mail Viewer Window and Email Opening Issues

    About a week ago I began having some significant problems using Mail on 10.5.8 that I have never had before. I opened Mail, only to find that while it opened on my menu bar and I had the little circle indicating it was open in my dock, no Viewer Window opened. Also, I couldn't quit the app without Force Quitting through the Apple menu in the menu bar. I could right click on the icon in the dock and open a Compose Email or a New Note window, however it would not allow me to send said composed email. Instead, Mail would hang and I would have to force quit as "Application not Responding". The beach ball would also be evident and a Force Quit required.
    A buddy recommended trying to open a Viewer Window through the File folder in the menu. I did that, a viewer window DID open and mail synced itself up to allow my inbox to show all recent emails I had received and read. Unfortunately, if I clicked on any email in my inbox, it would not load the email in the preview pane or open the email with a double click. Instead I would get a message saying "Loading" and the beach ball reappeared. Force Quit required.
    I found some solution somewhere which suggested rebuilding the database by moving the Envelope Index to my desktop from Home/Library/Mail to allow it to rebuild. I did this and it rebuilt a new Envelope Index, but the same problems exist. Frankly, I only have about 100-125 emails in my system so it is not exactly an overburdened mail system. I also do not have any mail haxies which would be causing this. Any thoughts or solutions? I would like to be able to check mail from somewhere other than the Mobile Me web browser app. Thanks.

    Not trying to be "That Guy" but I am bumping in the hopes that someone has a solution to this annoying and vexing issue. Thanks.

  • Intel and IPhone Sync issues

    Some forwarded this to me. It might be relevant to some users here.
    "Senior Editor, iLounge
    Published: Thursday, November 5, 2009
    News Category: iPhone
    Intel has issued a comment concerning the iPhone sync issues some users are experiencing with certain PCs containing a specific Intel chipset. “Our leading theory is a BIOS or system configuration issue, but we are still investigating,” Intel said. The basic input/output system (BIOS) is the boot firmware run by a PC on startup, which identifies, tests, and initializes core system devices such as the graphics card, hard disk, and other hardware. As we reported earlier this week, the syncing issue appears to linked to Intel’s P55 Express chipset and its USB controller, which leaves the afflicted machines able to recognize the iPhone but unable to sync. The problem has been most prevalent among PCs running 64-bit Windows 7, but the issue has also been reported on machines running both 32-bit and 64-bit versions of both Windows 7 and Vista."

    Hi R@chel,
    It sounds as if you are having difficulty making sure your iPhone only gets the music you want. In order to do this, you need to manually manage the data that gets synced to your iPhone. This article explains how to do so -
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296
    Specifically -
    Hi R@chel,
    It sounds as if you are having difficulty making sure your iPhone only gets the music you want. In order to do this, you need to manually manage the data that gets synced to your iPhone. This article explains how to do so -
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296
    Specifically -
    Syncing manually
    If you prefer not to automatically sync content to your device, you can set up manual syncing:
    Connect your device to your computer and open iTunes.
    Click the Devices button in the upper-right corner. (If you're viewing the iTunes Store, click the Library button in the upper-right corner. The Devices button will appear.)
    In the main iTunes browser window, select the Summary tab.
    Select the option to Manually manage music and videos or Manually manage music. This will deselect the automatic sync settings for the Music, Movies, and TV Shows tabs.
    Click Apply.
    And -
    After following the steps above, you can add individual songs, videos, and playlists from iTunes to your device. To add content to your device:
    Select your device.
    Click On this Device.
    Choose Add to in the upper-right corner. If you drag a song, video, TV show, or movie while viewing the media in your iTunes library, a sidebar will show up on the right. You can drag your content onto the device. You can also create and modify playlists directly on the device.
    Thanks for using Apple Support Communities.
    Best,
    Brett L
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Gmail/Exchange email and calendar syncing issues

    I have wiped my email accounts several times and entered in my data in the various ways as shown through the forums but my email accounts do no sync properly whether it is manual or active synced.
    I read my emails in my gmail and my Microsoft exchange account and will delete or file them away but then when I check my accounts on my desktop, they are not synced as I've done so on my phone. I've also noticed that my calendars are not synced correctly either.
    Could someone help me understand why and how these issues can be fixed? I'm in meetings for most of the day so I rely on my phone to keep me mobile. Was this a bad purchase?!?!

    Hi JadeyMU,
    How do you have your Microsoft Exchange account configured on your BlackBerry Z10? Are you using ActiveSync, BlackBerry Enterprise Server (BES), IMAP or POP?
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Quick Fix to iTouch Syncing issues

    I too have seen the problems mentioned in the forums about the ipod touch syncing issues with the january software upgrade option... And i have seen the quick fix that allows you to get it to sync. I will post it here so that eveybody doesn't have to scroll down to the bottom of a topic or search through topics. Please don't reply to keep this a clean topic so others can easily access the information.
    *Disconnect iPod Touch from computer.*
    *Disconnect computer from internet.*
    *Reconnect iPod Touch to computer.*
    *Start syncing editing ... whatever*
    *Reconnect to internet*
    This should hopefully allow you to start syncing again, it is not the ideal solution and I do hope the apple engineers can find a permanent solution. And thanks to the guys who posted the original instructions, I do not in any way take credit for the instructions, only making them more accessible.

    I REALLY appreciate your help.  Your fix worked and relieved a lot of frustration.  I have HP everything (Printer, lap-top, desk tops)  and was upset there wasn't an obvious "contact" option in the support web-site.  I knew if I was allowed to describe the problem, a bright person like you would respond.

  • Smartform Main window and Footer Overlap Issue

    Hi,
    I have a problem in printing my invoice smartform.
    I have to print the footer at the bottom of the main window. If the line items flow to the next page the footer should be printed only on the last page.
    I have overlapped the main window and footer windows in first and next page so that the footer window space in the main window is not left empty when there are more than one pages
    The problem is sometimes the main window is overlapping into the footer window space.
    Can someone suggest a solution for this.
    Thanks,
    Viswas

    Hi,
    Solution: The issue faced after overlapping the main window with footer window can be achieved by creating a folder within the main window and using the events to check whether there is enough space to print the footer.
    Following are the steps.
    Step 1:  Create a Secondary window say “Footer” which would be the footer window. Overlap the main window on the footer window as shown below.   
    The footer window will be behind the main window
    Step 2:  Create a folder within the main window say “Check_Footer”.
    Go to Tab “Events”, select the checkbox “Footer with Height” and give the required height of the footer. Select the checkbox “at End of Table”. Specify the “Minimum height” as required.
    Now, go to “Conditions” tab and select the checkbox “Only before end of main window”.   
    This is basically done to check whether there is enough space to print the footer on that page. The Footer window would then print the output.
    Step 3: Go to the created “Footer” window .Under the Conditions tab, select the checkbox “Only after end of main window”. Create a  text/tamplate/window whatever you want to display at bottom or footer data.
    Step 4: Save & Activate the Smartform and check the output.
    regards
    Rohit

  • Itunes and Iphone sync issues

    Hi There,
    So I have a slight problem and would be grateful if someone would shed some light as to how I can overcome this.
    I have an iPhone 5 and iTunes for windows, however, I have not downloaded the current software for the iPhone 5 as I do no have any storage space for it. I have recently tried to update my iPhone's music playlist but the playlist I want to sync is not, however, my old music and playlists keep syncing instead, and it keeps adding albums.In my new playlist I have approx 200ish songs whereas my iTunes is syncing over 700ish (and I've made sure I have not clicked and synced my library- my library has over 1000 so not sure where its syncing 700) I have tried several times to fix this by;
    switching off phone
    closing iTunes and opening it again
    creating a different playlist and re-syncing music
    de-selecting albums and artists manually
    de-selecting all music then syncing
    created a different playlist
    and none of the above have worked at all  
    It would be much appreciated if anyone has any advice or guidance as to how I can fix this, as I have new music I want to listen to, and with this new music I'll have more storage space!
    Thanks in advance!

    Hi R@chel,
    It sounds as if you are having difficulty making sure your iPhone only gets the music you want. In order to do this, you need to manually manage the data that gets synced to your iPhone. This article explains how to do so -
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296
    Specifically -
    Hi R@chel,
    It sounds as if you are having difficulty making sure your iPhone only gets the music you want. In order to do this, you need to manually manage the data that gets synced to your iPhone. This article explains how to do so -
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296
    Specifically -
    Syncing manually
    If you prefer not to automatically sync content to your device, you can set up manual syncing:
    Connect your device to your computer and open iTunes.
    Click the Devices button in the upper-right corner. (If you're viewing the iTunes Store, click the Library button in the upper-right corner. The Devices button will appear.)
    In the main iTunes browser window, select the Summary tab.
    Select the option to Manually manage music and videos or Manually manage music. This will deselect the automatic sync settings for the Music, Movies, and TV Shows tabs.
    Click Apply.
    And -
    After following the steps above, you can add individual songs, videos, and playlists from iTunes to your device. To add content to your device:
    Select your device.
    Click On this Device.
    Choose Add to in the upper-right corner. If you drag a song, video, TV show, or movie while viewing the media in your iTunes library, a sidebar will show up on the right. You can drag your content onto the device. You can also create and modify playlists directly on the device.
    Thanks for using Apple Support Communities.
    Best,
    Brett L
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Premiere pro cs5 : audio and video sync issue with .aiff file format

    I am using premiere pro cs5 on MAC and facing issue with audio and video sync  using .AIFF file format for audio unable to make it work.
    Is there any solution to this issue or any work around?
    Thanks in advance.
    Vinay

    Hi,
    hmmm, well that settles that...
    Here's a link to info about an open source free program to convert....for mac
    http://www.ehow.com/how_5072563_convert-files-wav-files-freeware.html
    Good luck
    Rod

  • Audio and Video syncing issues

    I have a video file where the audio and video file are normal when I play the clip in Quicktime. When I import the file into an FCP project and drag it into the timeline, the audio and video are no longer synced. My sequence setting is ProRes422 as is my video clip. The only difference I can see is that my clip is 24 bit integer and the sequence is 32 bit floating point. Although, this is my 50th project capturing old BetacamSP tapes and all my projects say this and I haven't had a problem until this particular file and not afterwards. Any thoughts?

    There you go then ... make sure you monitor audio and video by the same path ie both via the Kona card or both on the Mac ... or use the Playback Offset to compensate for the delay between the Canvas window and the Kona output.
    From the manual:
    To set the frame offset between the computer display and the external video and audio outputs
    Choose Final Cut Pro > System Settings.
    Click the Playback Control tab.
    Enter a number of frames in the Frame Offset number field.
    Frame offset can be any whole number between 0 and 30. The default value is 4. For example, if a video monitor connected to your DV camcorder shows your program four frames later than your computer display, a frame offset of 4 will synchronize the two.
    Note: Depending on your external monitor configuration, you may need to experiment with frame offset values to synchronize the external monitor and the computer display.
    Click OK.
    Play your video in the Canvas or Viewer and compare the video offset between your external monitor and your computer display.
    If the computer display and external monitor are still not synchronized, repeat steps 1 through 5 using different frame offset values until the display and monitor are in sync.

  • Mail App and IMAP sync issues

    I am facing IMAP sync issues with Mail App ver 4.4. I have specified the automatic fetch interval as 1 minute. The problem is the App does not seem to send requests to the server to sync the Inbox folder alone, but it send requests to get STATUS and sync the other folders.
    Has anyone else faced similar issues.
    Radha

    Not many of us would set the interval to be only 1 minute -- too often for the speed of many connections. Have you tried 5 minutes to see if the behavior continues?
    Ernie

  • Ical and iphone syncing issues

    I'll pile on with my own iphone/ical sync issue, to add to all the others i see.
    my iphone and ical synched just fine from the start, but since installing software updates, suddenly the calendar on iphone will not accept any new information.
    originally, i'd set up my entourage to sync to ical, and in turn 'sync' to iphone, but to test if this runaround was the problem, i've followed some of the other instructions laid out elswhere on this board to set up a test calendar on ical.
    this hasn't worked either. nor will the iphone calendar accept any new info when i explicitly direct the itunes software to replace info.
    i've also tried resetting everything, but those stubborn pre-software update calendar items remain on my iphone, completely unchanged.
    anyone have any ideas?

    The same thing happened to me. As of today's update (11/16) I got to the root of the problem. go into itunes with iphone connected. select information, and if your problem is mine, you will see that all ical and mailbox synching options are now strangely unchecked. check the boxes for what you want to synch. click apply. for an unknown reason, the software update then reveals that it thinks your phone is synching to another account. just keep clicking through, selecting synching with your computer and "new" account. ditto for the keychain issues. presto! it all synchs correctly again.
    hope this helps!

Maybe you are looking for